mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-25 22:20:45 +00:00
56b0bb96be
Instead of using single fixed value for the calibration offset, add tables which dynamically adjust this per calibration code from the SCC. Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com> Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
166 lines
7.1 KiB
C
166 lines
7.1 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2016 Socionext Inc.
|
|
* Author: Masahiro Yamada <yamada.masahiro@socionext.com>
|
|
*/
|
|
|
|
#ifndef __TMIO_COMMON_H__
|
|
#define __TMIO_COMMON_H__
|
|
|
|
#define TMIO_SD_CMD 0x000 /* command */
|
|
#define TMIO_SD_CMD_NOSTOP BIT(14) /* No automatic CMD12 issue */
|
|
#define TMIO_SD_CMD_MULTI BIT(13) /* multiple block transfer */
|
|
#define TMIO_SD_CMD_RD BIT(12) /* 1: read, 0: write */
|
|
#define TMIO_SD_CMD_DATA BIT(11) /* data transfer */
|
|
#define TMIO_SD_CMD_APP BIT(6) /* ACMD preceded by CMD55 */
|
|
#define TMIO_SD_CMD_NORMAL (0 << 8)/* auto-detect of resp-type */
|
|
#define TMIO_SD_CMD_RSP_NONE (3 << 8)/* response: none */
|
|
#define TMIO_SD_CMD_RSP_R1 (4 << 8)/* response: R1, R5, R6, R7 */
|
|
#define TMIO_SD_CMD_RSP_R1B (5 << 8)/* response: R1b, R5b */
|
|
#define TMIO_SD_CMD_RSP_R2 (6 << 8)/* response: R2 */
|
|
#define TMIO_SD_CMD_RSP_R3 (7 << 8)/* response: R3, R4 */
|
|
#define TMIO_SD_ARG 0x008 /* command argument */
|
|
#define TMIO_SD_STOP 0x010 /* stop action control */
|
|
#define TMIO_SD_STOP_SEC BIT(8) /* use sector count */
|
|
#define TMIO_SD_STOP_STP BIT(0) /* issue CMD12 */
|
|
#define TMIO_SD_SECCNT 0x014 /* sector counter */
|
|
#define TMIO_SD_RSP10 0x018 /* response[39:8] */
|
|
#define TMIO_SD_RSP32 0x020 /* response[71:40] */
|
|
#define TMIO_SD_RSP54 0x028 /* response[103:72] */
|
|
#define TMIO_SD_RSP76 0x030 /* response[127:104] */
|
|
#define TMIO_SD_INFO1 0x038 /* IRQ status 1 */
|
|
#define TMIO_SD_INFO1_CD BIT(5) /* state of card detect */
|
|
#define TMIO_SD_INFO1_INSERT BIT(4) /* card inserted */
|
|
#define TMIO_SD_INFO1_REMOVE BIT(3) /* card removed */
|
|
#define TMIO_SD_INFO1_CMP BIT(2) /* data complete */
|
|
#define TMIO_SD_INFO1_RSP BIT(0) /* response complete */
|
|
#define TMIO_SD_INFO2 0x03c /* IRQ status 2 */
|
|
#define TMIO_SD_INFO2_ERR_ILA BIT(15) /* illegal access err */
|
|
#define TMIO_SD_INFO2_CBSY BIT(14) /* command busy */
|
|
#define TMIO_SD_INFO2_SCLKDIVEN BIT(13) /* command setting reg ena */
|
|
#define TMIO_SD_INFO2_BWE BIT(9) /* write buffer ready */
|
|
#define TMIO_SD_INFO2_BRE BIT(8) /* read buffer ready */
|
|
#define TMIO_SD_INFO2_DAT0 BIT(7) /* SDDAT0 */
|
|
#define TMIO_SD_INFO2_ERR_RTO BIT(6) /* response time out */
|
|
#define TMIO_SD_INFO2_ERR_ILR BIT(5) /* illegal read err */
|
|
#define TMIO_SD_INFO2_ERR_ILW BIT(4) /* illegal write err */
|
|
#define TMIO_SD_INFO2_ERR_TO BIT(3) /* time out error */
|
|
#define TMIO_SD_INFO2_ERR_END BIT(2) /* END bit error */
|
|
#define TMIO_SD_INFO2_ERR_CRC BIT(1) /* CRC error */
|
|
#define TMIO_SD_INFO2_ERR_IDX BIT(0) /* cmd index error */
|
|
#define TMIO_SD_INFO1_MASK 0x040
|
|
#define TMIO_SD_INFO2_MASK 0x044
|
|
#define TMIO_SD_CLKCTL 0x048 /* clock divisor */
|
|
#define TMIO_SD_CLKCTL_DIV_MASK 0x104ff
|
|
#define TMIO_SD_CLKCTL_DIV1024 BIT(16) /* SDCLK = CLK / 1024 */
|
|
#define TMIO_SD_CLKCTL_DIV512 BIT(7) /* SDCLK = CLK / 512 */
|
|
#define TMIO_SD_CLKCTL_DIV256 BIT(6) /* SDCLK = CLK / 256 */
|
|
#define TMIO_SD_CLKCTL_DIV128 BIT(5) /* SDCLK = CLK / 128 */
|
|
#define TMIO_SD_CLKCTL_DIV64 BIT(4) /* SDCLK = CLK / 64 */
|
|
#define TMIO_SD_CLKCTL_DIV32 BIT(3) /* SDCLK = CLK / 32 */
|
|
#define TMIO_SD_CLKCTL_DIV16 BIT(2) /* SDCLK = CLK / 16 */
|
|
#define TMIO_SD_CLKCTL_DIV8 BIT(1) /* SDCLK = CLK / 8 */
|
|
#define TMIO_SD_CLKCTL_DIV4 BIT(0) /* SDCLK = CLK / 4 */
|
|
#define TMIO_SD_CLKCTL_DIV2 0 /* SDCLK = CLK / 2 */
|
|
#define TMIO_SD_CLKCTL_DIV1 BIT(10) /* SDCLK = CLK */
|
|
#define TMIO_SD_CLKCTL_RCAR_DIV1 0xff /* SDCLK = CLK (RCar ver.) */
|
|
#define TMIO_SD_CLKCTL_OFFEN BIT(9) /* stop SDCLK when unused */
|
|
#define TMIO_SD_CLKCTL_SCLKEN BIT(8) /* SDCLK output enable */
|
|
#define TMIO_SD_SIZE 0x04c /* block size */
|
|
#define TMIO_SD_OPTION 0x050
|
|
#define TMIO_SD_OPTION_WIDTH_MASK (5 << 13)
|
|
#define TMIO_SD_OPTION_WIDTH_1 (4 << 13)
|
|
#define TMIO_SD_OPTION_WIDTH_4 (0 << 13)
|
|
#define TMIO_SD_OPTION_WIDTH_8 (1 << 13)
|
|
#define TMIO_SD_BUF 0x060 /* read/write buffer */
|
|
#define TMIO_SD_EXTMODE 0x1b0
|
|
#define TMIO_SD_EXTMODE_DMA_EN BIT(1) /* transfer 1: DMA, 0: pio */
|
|
#define TMIO_SD_SOFT_RST 0x1c0
|
|
#define TMIO_SD_SOFT_RST_RSTX BIT(0) /* reset deassert */
|
|
#define TMIO_SD_VERSION 0x1c4 /* version register */
|
|
#define TMIO_SD_VERSION_IP 0xff /* IP version */
|
|
#define TMIO_SD_HOST_MODE 0x1c8
|
|
#define TMIO_SD_IF_MODE 0x1cc
|
|
#define TMIO_SD_IF_MODE_DDR BIT(0) /* DDR mode */
|
|
#define TMIO_SD_VOLT 0x1e4 /* voltage switch */
|
|
#define TMIO_SD_VOLT_MASK (3 << 0)
|
|
#define TMIO_SD_VOLT_OFF (0 << 0)
|
|
#define TMIO_SD_VOLT_330 (1 << 0)/* 3.3V signal */
|
|
#define TMIO_SD_VOLT_180 (2 << 0)/* 1.8V signal */
|
|
#define TMIO_SD_DMA_MODE 0x410
|
|
#define TMIO_SD_DMA_MODE_DIR_RD BIT(16) /* 1: from device, 0: to dev */
|
|
#define TMIO_SD_DMA_MODE_ADDR_INC BIT(0) /* 1: address inc, 0: fixed */
|
|
#define TMIO_SD_DMA_CTL 0x414
|
|
#define TMIO_SD_DMA_CTL_START BIT(0) /* start DMA (auto cleared) */
|
|
#define TMIO_SD_DMA_RST 0x418
|
|
#define TMIO_SD_DMA_RST_RD BIT(9)
|
|
#define TMIO_SD_DMA_RST_WR BIT(8)
|
|
#define TMIO_SD_DMA_INFO1 0x420
|
|
#define TMIO_SD_DMA_INFO1_END_RD2 BIT(20) /* DMA from device is complete (uniphier) */
|
|
#define TMIO_SD_DMA_INFO1_END_RD BIT(17) /* DMA from device is complete (renesas) */
|
|
#define TMIO_SD_DMA_INFO1_END_WR BIT(16) /* DMA to device is complete */
|
|
#define TMIO_SD_DMA_INFO1_MASK 0x424
|
|
#define TMIO_SD_DMA_INFO2 0x428
|
|
#define TMIO_SD_DMA_INFO2_ERR_RD BIT(17)
|
|
#define TMIO_SD_DMA_INFO2_ERR_WR BIT(16)
|
|
#define TMIO_SD_DMA_INFO2_MASK 0x42c
|
|
#define TMIO_SD_DMA_ADDR_L 0x440
|
|
#define TMIO_SD_DMA_ADDR_H 0x444
|
|
|
|
/* alignment required by the DMA engine of this controller */
|
|
#define TMIO_SD_DMA_MINALIGN 0x10
|
|
|
|
struct tmio_sd_plat {
|
|
struct mmc_config cfg;
|
|
struct mmc mmc;
|
|
};
|
|
|
|
struct tmio_sd_priv {
|
|
void __iomem *regbase;
|
|
unsigned int version;
|
|
u32 caps;
|
|
u32 read_poll_flag;
|
|
#define TMIO_SD_CAP_NONREMOVABLE BIT(0) /* Nonremovable e.g. eMMC */
|
|
#define TMIO_SD_CAP_DMA_INTERNAL BIT(1) /* have internal DMA engine */
|
|
#define TMIO_SD_CAP_DIV1024 BIT(2) /* divisor 1024 is available */
|
|
#define TMIO_SD_CAP_64BIT BIT(3) /* Controller is 64bit */
|
|
#define TMIO_SD_CAP_16BIT BIT(4) /* Controller is 16bit */
|
|
#define TMIO_SD_CAP_RCAR_GEN2 BIT(5) /* Renesas RCar version of IP */
|
|
#define TMIO_SD_CAP_RCAR_GEN3 BIT(6) /* Renesas RCar version of IP */
|
|
#define TMIO_SD_CAP_RCAR_UHS BIT(7) /* Renesas RCar UHS/SDR modes */
|
|
#define TMIO_SD_CAP_RCAR \
|
|
(TMIO_SD_CAP_RCAR_GEN2 | TMIO_SD_CAP_RCAR_GEN3)
|
|
#ifdef CONFIG_DM_REGULATOR
|
|
struct udevice *vqmmc_dev;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
struct clk clk;
|
|
#endif
|
|
#if CONFIG_IS_ENABLED(RENESAS_SDHI)
|
|
unsigned int smpcmp;
|
|
u8 tap_set;
|
|
u8 tap_num;
|
|
u8 nrtaps;
|
|
bool needs_adjust_hs400;
|
|
bool adjust_hs400_enable;
|
|
u8 adjust_hs400_offset;
|
|
u8 adjust_hs400_calibrate;
|
|
u8 hs400_bad_tap;
|
|
const u8 *adjust_hs400_calib_table;
|
|
#endif
|
|
ulong (*clk_get_rate)(struct tmio_sd_priv *);
|
|
};
|
|
|
|
int tmio_sd_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data);
|
|
int tmio_sd_set_ios(struct udevice *dev);
|
|
int tmio_sd_get_cd(struct udevice *dev);
|
|
|
|
int tmio_sd_bind(struct udevice *dev);
|
|
int tmio_sd_probe(struct udevice *dev, u32 quirks);
|
|
|
|
u32 tmio_sd_readl(struct tmio_sd_priv *priv, unsigned int reg);
|
|
void tmio_sd_writel(struct tmio_sd_priv *priv,
|
|
u32 val, unsigned int reg);
|
|
|
|
#endif /* __TMIO_COMMON_H__ */
|