mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-21 10:43:06 +00:00
0b1284eb52
It is a pain to have to specify the value 10 in each call. Add a new dectoul() function and update the code to use it. Signed-off-by: Simon Glass <sjg@chromium.org>
2764 lines
72 KiB
C
2764 lines
72 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Cadence USBSS DRD Driver - gadget side.
|
|
*
|
|
* Copyright (C) 2018-2019 Cadence Design Systems.
|
|
* Copyright (C) 2017-2018 NXP
|
|
*
|
|
* Authors: Pawel Jez <pjez@cadence.com>,
|
|
* Pawel Laszczak <pawell@cadence.com>
|
|
* Peter Chen <peter.chen@nxp.com>
|
|
*/
|
|
|
|
/*
|
|
* Work around 1:
|
|
* At some situations, the controller may get stale data address in TRB
|
|
* at below sequences:
|
|
* 1. Controller read TRB includes data address
|
|
* 2. Software updates TRBs includes data address and Cycle bit
|
|
* 3. Controller read TRB which includes Cycle bit
|
|
* 4. DMA run with stale data address
|
|
*
|
|
* To fix this problem, driver needs to make the first TRB in TD as invalid.
|
|
* After preparing all TRBs driver needs to check the position of DMA and
|
|
* if the DMA point to the first just added TRB and doorbell is 1,
|
|
* then driver must defer making this TRB as valid. This TRB will be make
|
|
* as valid during adding next TRB only if DMA is stopped or at TRBERR
|
|
* interrupt.
|
|
*
|
|
* Issue has been fixed in DEV_VER_V3 version of controller.
|
|
*
|
|
* Work around 2:
|
|
* Controller for OUT endpoints has shared on-chip buffers for all incoming
|
|
* packets, including ep0out. It's FIFO buffer, so packets must be handle by DMA
|
|
* in correct order. If the first packet in the buffer will not be handled,
|
|
* then the following packets directed for other endpoints and functions
|
|
* will be blocked.
|
|
* Additionally the packets directed to one endpoint can block entire on-chip
|
|
* buffers. In this case transfer to other endpoints also will blocked.
|
|
*
|
|
* To resolve this issue after raising the descriptor missing interrupt
|
|
* driver prepares internal usb_request object and use it to arm DMA transfer.
|
|
*
|
|
* The problematic situation was observed in case when endpoint has been enabled
|
|
* but no usb_request were queued. Driver try detects such endpoints and will
|
|
* use this workaround only for these endpoint.
|
|
*
|
|
* Driver use limited number of buffer. This number can be set by macro
|
|
* CDNS3_WA2_NUM_BUFFERS.
|
|
*
|
|
* Such blocking situation was observed on ACM gadget. For this function
|
|
* host send OUT data packet but ACM function is not prepared for this packet.
|
|
* It's cause that buffer placed in on chip memory block transfer to other
|
|
* endpoints.
|
|
*
|
|
* Issue has been fixed in DEV_VER_V2 version of controller.
|
|
*
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <dm/devres.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <linux/usb/gadget.h>
|
|
#include <linux/compat.h>
|
|
#include <linux/iopoll.h>
|
|
#include <linux/dma-mapping.h>
|
|
#include <linux/bitmap.h>
|
|
#include <linux/bug.h>
|
|
|
|
#include "core.h"
|
|
#include "gadget-export.h"
|
|
#include "gadget.h"
|
|
#include "trace.h"
|
|
#include "drd.h"
|
|
|
|
#define readl_poll_timeout_atomic readl_poll_timeout
|
|
#define usleep_range(a, b) udelay((b))
|
|
|
|
static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
|
|
struct usb_request *request,
|
|
gfp_t gfp_flags);
|
|
|
|
/**
|
|
* cdns3_set_register_bit - set bit in given register.
|
|
* @ptr: address of device controller register to be read and changed
|
|
* @mask: bits requested to set
|
|
*/
|
|
void cdns3_set_register_bit(void __iomem *ptr, u32 mask)
|
|
{
|
|
mask = readl(ptr) | mask;
|
|
writel(mask, ptr);
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_addr_to_index - Macro converts endpoint address to
|
|
* index of endpoint object in cdns3_device.eps[] container
|
|
* @ep_addr: endpoint address for which endpoint object is required
|
|
*
|
|
*/
|
|
u8 cdns3_ep_addr_to_index(u8 ep_addr)
|
|
{
|
|
return (((ep_addr & 0x7F)) + ((ep_addr & USB_DIR_IN) ? 16 : 0));
|
|
}
|
|
|
|
static int cdns3_get_dma_pos(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep)
|
|
{
|
|
int dma_index;
|
|
|
|
dma_index = readl(&priv_dev->regs->ep_traddr) - priv_ep->trb_pool_dma;
|
|
|
|
return dma_index / TRB_SIZE;
|
|
}
|
|
|
|
/**
|
|
* cdns3_next_request - returns next request from list
|
|
* @list: list containing requests
|
|
*
|
|
* Returns request or NULL if no requests in list
|
|
*/
|
|
struct usb_request *cdns3_next_request(struct list_head *list)
|
|
{
|
|
return list_first_entry_or_null(list, struct usb_request, list);
|
|
}
|
|
|
|
/**
|
|
* cdns3_next_align_buf - returns next buffer from list
|
|
* @list: list containing buffers
|
|
*
|
|
* Returns buffer or NULL if no buffers in list
|
|
*/
|
|
struct cdns3_aligned_buf *cdns3_next_align_buf(struct list_head *list)
|
|
{
|
|
return list_first_entry_or_null(list, struct cdns3_aligned_buf, list);
|
|
}
|
|
|
|
/**
|
|
* cdns3_next_priv_request - returns next request from list
|
|
* @list: list containing requests
|
|
*
|
|
* Returns request or NULL if no requests in list
|
|
*/
|
|
struct cdns3_request *cdns3_next_priv_request(struct list_head *list)
|
|
{
|
|
return list_first_entry_or_null(list, struct cdns3_request, list);
|
|
}
|
|
|
|
/**
|
|
* select_ep - selects endpoint
|
|
* @priv_dev: extended gadget object
|
|
* @ep: endpoint address
|
|
*/
|
|
void cdns3_select_ep(struct cdns3_device *priv_dev, u32 ep)
|
|
{
|
|
if (priv_dev->selected_ep == ep)
|
|
return;
|
|
|
|
priv_dev->selected_ep = ep;
|
|
writel(ep, &priv_dev->regs->ep_sel);
|
|
}
|
|
|
|
dma_addr_t cdns3_trb_virt_to_dma(struct cdns3_endpoint *priv_ep,
|
|
struct cdns3_trb *trb)
|
|
{
|
|
u32 offset = (char *)trb - (char *)priv_ep->trb_pool;
|
|
|
|
return priv_ep->trb_pool_dma + offset;
|
|
}
|
|
|
|
int cdns3_ring_size(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
switch (priv_ep->type) {
|
|
case USB_ENDPOINT_XFER_ISOC:
|
|
return TRB_ISO_RING_SIZE;
|
|
case USB_ENDPOINT_XFER_CONTROL:
|
|
return TRB_CTRL_RING_SIZE;
|
|
default:
|
|
return TRB_RING_SIZE;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_allocate_trb_pool - Allocates TRB's pool for selected endpoint
|
|
* @priv_ep: endpoint object
|
|
*
|
|
* Function will return 0 on success or -ENOMEM on allocation error
|
|
*/
|
|
int cdns3_allocate_trb_pool(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
int ring_size = cdns3_ring_size(priv_ep);
|
|
struct cdns3_trb *link_trb;
|
|
|
|
if (!priv_ep->trb_pool) {
|
|
priv_ep->trb_pool =
|
|
dma_alloc_coherent(ring_size,
|
|
(unsigned long *)&priv_ep->trb_pool_dma);
|
|
if (!priv_ep->trb_pool)
|
|
return -ENOMEM;
|
|
} else {
|
|
memset(priv_ep->trb_pool, 0, ring_size);
|
|
}
|
|
|
|
if (!priv_ep->num)
|
|
return 0;
|
|
|
|
priv_ep->num_trbs = ring_size / TRB_SIZE;
|
|
/* Initialize the last TRB as Link TRB. */
|
|
link_trb = (priv_ep->trb_pool + (priv_ep->num_trbs - 1));
|
|
link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma);
|
|
link_trb->control = TRB_CYCLE | TRB_TYPE(TRB_LINK) | TRB_TOGGLE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cdns3_free_trb_pool(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
if (priv_ep->trb_pool) {
|
|
dma_free_coherent(priv_ep->trb_pool);
|
|
priv_ep->trb_pool = NULL;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_stall_flush - Stalls and flushes selected endpoint
|
|
* @priv_ep: endpoint object
|
|
*
|
|
* Endpoint must be selected before call to this function
|
|
*/
|
|
static void cdns3_ep_stall_flush(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
int val;
|
|
|
|
trace_cdns3_halt(priv_ep, 1, 1);
|
|
|
|
writel(EP_CMD_DFLUSH | EP_CMD_ERDY | EP_CMD_SSTALL,
|
|
&priv_dev->regs->ep_cmd);
|
|
|
|
/* wait for DFLUSH cleared */
|
|
readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
|
|
!(val & EP_CMD_DFLUSH), 1000);
|
|
priv_ep->flags |= EP_STALLED;
|
|
priv_ep->flags &= ~EP_STALL_PENDING;
|
|
}
|
|
|
|
/**
|
|
* cdns3_hw_reset_eps_config - reset endpoints configuration kept by controller.
|
|
* @priv_dev: extended gadget object
|
|
*/
|
|
void cdns3_hw_reset_eps_config(struct cdns3_device *priv_dev)
|
|
{
|
|
writel(USB_CONF_CFGRST, &priv_dev->regs->usb_conf);
|
|
|
|
cdns3_allow_enable_l1(priv_dev, 0);
|
|
priv_dev->hw_configured_flag = 0;
|
|
priv_dev->onchip_used_size = 0;
|
|
priv_dev->out_mem_is_allocated = 0;
|
|
priv_dev->wait_for_setup = 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_inc_trb - increment a trb index.
|
|
* @index: Pointer to the TRB index to increment.
|
|
* @cs: Cycle state
|
|
* @trb_in_seg: number of TRBs in segment
|
|
*
|
|
* The index should never point to the link TRB. After incrementing,
|
|
* if it is point to the link TRB, wrap around to the beginning and revert
|
|
* cycle state bit The
|
|
* link TRB is always at the last TRB entry.
|
|
*/
|
|
static void cdns3_ep_inc_trb(int *index, u8 *cs, int trb_in_seg)
|
|
{
|
|
(*index)++;
|
|
if (*index == (trb_in_seg - 1)) {
|
|
*index = 0;
|
|
*cs ^= 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_inc_enq - increment endpoint's enqueue pointer
|
|
* @priv_ep: The endpoint whose enqueue pointer we're incrementing
|
|
*/
|
|
static void cdns3_ep_inc_enq(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
priv_ep->free_trbs--;
|
|
cdns3_ep_inc_trb(&priv_ep->enqueue, &priv_ep->pcs, priv_ep->num_trbs);
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_inc_deq - increment endpoint's dequeue pointer
|
|
* @priv_ep: The endpoint whose dequeue pointer we're incrementing
|
|
*/
|
|
static void cdns3_ep_inc_deq(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
priv_ep->free_trbs++;
|
|
cdns3_ep_inc_trb(&priv_ep->dequeue, &priv_ep->ccs, priv_ep->num_trbs);
|
|
}
|
|
|
|
void cdns3_move_deq_to_next_trb(struct cdns3_request *priv_req)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
|
|
int current_trb = priv_req->start_trb;
|
|
|
|
while (current_trb != priv_req->end_trb) {
|
|
cdns3_ep_inc_deq(priv_ep);
|
|
current_trb = priv_ep->dequeue;
|
|
}
|
|
|
|
cdns3_ep_inc_deq(priv_ep);
|
|
}
|
|
|
|
/**
|
|
* cdns3_allow_enable_l1 - enable/disable permits to transition to L1.
|
|
* @priv_dev: Extended gadget object
|
|
* @enable: Enable/disable permit to transition to L1.
|
|
*
|
|
* If bit USB_CONF_L1EN is set and device receive Extended Token packet,
|
|
* then controller answer with ACK handshake.
|
|
* If bit USB_CONF_L1DS is set and device receive Extended Token packet,
|
|
* then controller answer with NYET handshake.
|
|
*/
|
|
void cdns3_allow_enable_l1(struct cdns3_device *priv_dev, int enable)
|
|
{
|
|
if (enable)
|
|
writel(USB_CONF_L1EN, &priv_dev->regs->usb_conf);
|
|
else
|
|
writel(USB_CONF_L1DS, &priv_dev->regs->usb_conf);
|
|
}
|
|
|
|
enum usb_device_speed cdns3_get_speed(struct cdns3_device *priv_dev)
|
|
{
|
|
u32 reg;
|
|
|
|
reg = readl(&priv_dev->regs->usb_sts);
|
|
|
|
if (DEV_SUPERSPEED(reg))
|
|
return USB_SPEED_SUPER;
|
|
else if (DEV_HIGHSPEED(reg))
|
|
return USB_SPEED_HIGH;
|
|
else if (DEV_FULLSPEED(reg))
|
|
return USB_SPEED_FULL;
|
|
else if (DEV_LOWSPEED(reg))
|
|
return USB_SPEED_LOW;
|
|
return USB_SPEED_UNKNOWN;
|
|
}
|
|
|
|
/**
|
|
* cdns3_start_all_request - add to ring all request not started
|
|
* @priv_dev: Extended gadget object
|
|
* @priv_ep: The endpoint for whom request will be started.
|
|
*
|
|
* Returns return ENOMEM if transfer ring i not enough TRBs to start
|
|
* all requests.
|
|
*/
|
|
static int cdns3_start_all_request(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct usb_request *request;
|
|
int ret = 0;
|
|
|
|
while (!list_empty(&priv_ep->deferred_req_list)) {
|
|
request = cdns3_next_request(&priv_ep->deferred_req_list);
|
|
|
|
ret = cdns3_ep_run_transfer(priv_ep, request);
|
|
if (ret)
|
|
return ret;
|
|
|
|
list_del(&request->list);
|
|
list_add_tail(&request->list,
|
|
&priv_ep->pending_req_list);
|
|
}
|
|
|
|
priv_ep->flags &= ~EP_RING_FULL;
|
|
return ret;
|
|
}
|
|
|
|
/*
|
|
* WA2: Set flag for all not ISOC OUT endpoints. If this flag is set
|
|
* driver try to detect whether endpoint need additional internal
|
|
* buffer for unblocking on-chip FIFO buffer. This flag will be cleared
|
|
* if before first DESCMISS interrupt the DMA will be armed.
|
|
*/
|
|
#define cdns3_wa2_enable_detection(priv_dev, ep_priv, reg) do { \
|
|
if (!priv_ep->dir && priv_ep->type != USB_ENDPOINT_XFER_ISOC) { \
|
|
priv_ep->flags |= EP_QUIRK_EXTRA_BUF_DET; \
|
|
(reg) |= EP_STS_EN_DESCMISEN; \
|
|
} } while (0)
|
|
|
|
/**
|
|
* cdns3_wa2_descmiss_copy_data copy data from internal requests to
|
|
* request queued by class driver.
|
|
* @priv_ep: extended endpoint object
|
|
* @request: request object
|
|
*/
|
|
static void cdns3_wa2_descmiss_copy_data(struct cdns3_endpoint *priv_ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct usb_request *descmiss_req;
|
|
struct cdns3_request *descmiss_priv_req;
|
|
|
|
while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
|
|
int chunk_end;
|
|
int length;
|
|
|
|
descmiss_priv_req =
|
|
cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
|
|
descmiss_req = &descmiss_priv_req->request;
|
|
|
|
/* driver can't touch pending request */
|
|
if (descmiss_priv_req->flags & REQUEST_PENDING)
|
|
break;
|
|
|
|
chunk_end = descmiss_priv_req->flags & REQUEST_INTERNAL_CH;
|
|
length = request->actual + descmiss_req->actual;
|
|
|
|
request->status = descmiss_req->status;
|
|
|
|
if (length <= request->length) {
|
|
memcpy(&((u8 *)request->buf)[request->actual],
|
|
descmiss_req->buf,
|
|
descmiss_req->actual);
|
|
request->actual = length;
|
|
} else {
|
|
/* It should never occur */
|
|
request->status = -ENOMEM;
|
|
}
|
|
|
|
list_del_init(&descmiss_priv_req->list);
|
|
|
|
kfree(descmiss_req->buf);
|
|
cdns3_gadget_ep_free_request(&priv_ep->endpoint, descmiss_req);
|
|
--priv_ep->wa2_counter;
|
|
|
|
if (!chunk_end)
|
|
break;
|
|
}
|
|
}
|
|
|
|
struct usb_request *cdns3_wa2_gadget_giveback(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep,
|
|
struct cdns3_request *priv_req)
|
|
{
|
|
if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN &&
|
|
priv_req->flags & REQUEST_INTERNAL) {
|
|
struct usb_request *req;
|
|
|
|
req = cdns3_next_request(&priv_ep->deferred_req_list);
|
|
|
|
priv_ep->descmis_req = NULL;
|
|
|
|
if (!req)
|
|
return NULL;
|
|
|
|
cdns3_wa2_descmiss_copy_data(priv_ep, req);
|
|
if (!(priv_ep->flags & EP_QUIRK_END_TRANSFER) &&
|
|
req->length != req->actual) {
|
|
/* wait for next part of transfer */
|
|
return NULL;
|
|
}
|
|
|
|
if (req->status == -EINPROGRESS)
|
|
req->status = 0;
|
|
|
|
list_del_init(&req->list);
|
|
cdns3_start_all_request(priv_dev, priv_ep);
|
|
return req;
|
|
}
|
|
|
|
return &priv_req->request;
|
|
}
|
|
|
|
int cdns3_wa2_gadget_ep_queue(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep,
|
|
struct cdns3_request *priv_req)
|
|
{
|
|
int deferred = 0;
|
|
|
|
/*
|
|
* If transfer was queued before DESCMISS appear than we
|
|
* can disable handling of DESCMISS interrupt. Driver assumes that it
|
|
* can disable special treatment for this endpoint.
|
|
*/
|
|
if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
|
|
u32 reg;
|
|
|
|
cdns3_select_ep(priv_dev, priv_ep->num | priv_ep->dir);
|
|
priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
|
|
reg = readl(&priv_dev->regs->ep_sts_en);
|
|
reg &= ~EP_STS_EN_DESCMISEN;
|
|
trace_cdns3_wa2(priv_ep, "workaround disabled\n");
|
|
writel(reg, &priv_dev->regs->ep_sts_en);
|
|
}
|
|
|
|
if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
|
|
u8 pending_empty = list_empty(&priv_ep->pending_req_list);
|
|
u8 descmiss_empty = list_empty(&priv_ep->wa2_descmiss_req_list);
|
|
|
|
/*
|
|
* DESCMISS transfer has been finished, so data will be
|
|
* directly copied from internal allocated usb_request
|
|
* objects.
|
|
*/
|
|
if (pending_empty && !descmiss_empty &&
|
|
!(priv_req->flags & REQUEST_INTERNAL)) {
|
|
cdns3_wa2_descmiss_copy_data(priv_ep,
|
|
&priv_req->request);
|
|
|
|
trace_cdns3_wa2(priv_ep, "get internal stored data");
|
|
|
|
list_add_tail(&priv_req->request.list,
|
|
&priv_ep->pending_req_list);
|
|
cdns3_gadget_giveback(priv_ep, priv_req,
|
|
priv_req->request.status);
|
|
|
|
/*
|
|
* Intentionally driver returns positive value as
|
|
* correct value. It informs that transfer has
|
|
* been finished.
|
|
*/
|
|
return EINPROGRESS;
|
|
}
|
|
|
|
/*
|
|
* Driver will wait for completion DESCMISS transfer,
|
|
* before starts new, not DESCMISS transfer.
|
|
*/
|
|
if (!pending_empty && !descmiss_empty) {
|
|
trace_cdns3_wa2(priv_ep, "wait for pending transfer\n");
|
|
deferred = 1;
|
|
}
|
|
|
|
if (priv_req->flags & REQUEST_INTERNAL)
|
|
list_add_tail(&priv_req->list,
|
|
&priv_ep->wa2_descmiss_req_list);
|
|
}
|
|
|
|
return deferred;
|
|
}
|
|
|
|
static void cdns3_wa2_remove_old_request(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_request *priv_req;
|
|
|
|
while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
|
|
u8 chain;
|
|
|
|
priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
|
|
chain = !!(priv_req->flags & REQUEST_INTERNAL_CH);
|
|
|
|
trace_cdns3_wa2(priv_ep, "removes eldest request");
|
|
|
|
kfree(priv_req->request.buf);
|
|
cdns3_gadget_ep_free_request(&priv_ep->endpoint,
|
|
&priv_req->request);
|
|
list_del_init(&priv_req->list);
|
|
--priv_ep->wa2_counter;
|
|
|
|
if (!chain)
|
|
break;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_wa2_descmissing_packet - handles descriptor missing event.
|
|
* @priv_dev: extended gadget object
|
|
*
|
|
* This function is used only for WA2. For more information see Work around 2
|
|
* description.
|
|
*/
|
|
static void cdns3_wa2_descmissing_packet(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_request *priv_req;
|
|
struct usb_request *request;
|
|
|
|
if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET) {
|
|
priv_ep->flags &= ~EP_QUIRK_EXTRA_BUF_DET;
|
|
priv_ep->flags |= EP_QUIRK_EXTRA_BUF_EN;
|
|
}
|
|
|
|
trace_cdns3_wa2(priv_ep, "Description Missing detected\n");
|
|
|
|
if (priv_ep->wa2_counter >= CDNS3_WA2_NUM_BUFFERS)
|
|
cdns3_wa2_remove_old_request(priv_ep);
|
|
|
|
request = cdns3_gadget_ep_alloc_request(&priv_ep->endpoint,
|
|
GFP_ATOMIC);
|
|
if (!request)
|
|
goto err;
|
|
|
|
priv_req = to_cdns3_request(request);
|
|
priv_req->flags |= REQUEST_INTERNAL;
|
|
|
|
/* if this field is still assigned it indicate that transfer related
|
|
* with this request has not been finished yet. Driver in this
|
|
* case simply allocate next request and assign flag REQUEST_INTERNAL_CH
|
|
* flag to previous one. It will indicate that current request is
|
|
* part of the previous one.
|
|
*/
|
|
if (priv_ep->descmis_req)
|
|
priv_ep->descmis_req->flags |= REQUEST_INTERNAL_CH;
|
|
|
|
priv_req->request.buf = kzalloc(CDNS3_DESCMIS_BUF_SIZE,
|
|
GFP_ATOMIC);
|
|
priv_ep->wa2_counter++;
|
|
|
|
if (!priv_req->request.buf) {
|
|
cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
|
|
goto err;
|
|
}
|
|
|
|
priv_req->request.length = CDNS3_DESCMIS_BUF_SIZE;
|
|
priv_ep->descmis_req = priv_req;
|
|
|
|
__cdns3_gadget_ep_queue(&priv_ep->endpoint,
|
|
&priv_ep->descmis_req->request,
|
|
GFP_ATOMIC);
|
|
|
|
return;
|
|
|
|
err:
|
|
dev_err(priv_ep->cdns3_dev->dev,
|
|
"Failed: No sufficient memory for DESCMIS\n");
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_giveback - call struct usb_request's ->complete callback
|
|
* @priv_ep: The endpoint to whom the request belongs to
|
|
* @priv_req: The request we're giving back
|
|
* @status: completion code for the request
|
|
*
|
|
* Must be called with controller's lock held and interrupts disabled. This
|
|
* function will unmap @req and call its ->complete() callback to notify upper
|
|
* layers that it has completed.
|
|
*/
|
|
void cdns3_gadget_giveback(struct cdns3_endpoint *priv_ep,
|
|
struct cdns3_request *priv_req,
|
|
int status)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
struct usb_request *request = &priv_req->request;
|
|
|
|
list_del_init(&request->list);
|
|
|
|
if (request->status == -EINPROGRESS)
|
|
request->status = status;
|
|
|
|
usb_gadget_unmap_request(&priv_dev->gadget, request,
|
|
priv_ep->dir);
|
|
|
|
if ((priv_req->flags & REQUEST_UNALIGNED) &&
|
|
priv_ep->dir == USB_DIR_OUT && !request->status)
|
|
memcpy(request->buf, priv_req->aligned_buf->buf,
|
|
request->length);
|
|
|
|
priv_req->flags &= ~(REQUEST_PENDING | REQUEST_UNALIGNED);
|
|
trace_cdns3_gadget_giveback(priv_req);
|
|
|
|
if (priv_dev->dev_ver < DEV_VER_V2) {
|
|
request = cdns3_wa2_gadget_giveback(priv_dev, priv_ep,
|
|
priv_req);
|
|
if (!request)
|
|
return;
|
|
}
|
|
|
|
if (request->complete) {
|
|
spin_unlock(&priv_dev->lock);
|
|
usb_gadget_giveback_request(&priv_ep->endpoint,
|
|
request);
|
|
spin_lock(&priv_dev->lock);
|
|
}
|
|
|
|
if (request->buf == priv_dev->zlp_buf)
|
|
cdns3_gadget_ep_free_request(&priv_ep->endpoint, request);
|
|
}
|
|
|
|
void cdns3_wa1_restore_cycle_bit(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
/* Work around for stale data address in TRB*/
|
|
if (priv_ep->wa1_set) {
|
|
trace_cdns3_wa1(priv_ep, "restore cycle bit");
|
|
|
|
priv_ep->wa1_set = 0;
|
|
priv_ep->wa1_trb_index = 0xFFFF;
|
|
if (priv_ep->wa1_cycle_bit) {
|
|
priv_ep->wa1_trb->control =
|
|
priv_ep->wa1_trb->control | 0x1;
|
|
} else {
|
|
priv_ep->wa1_trb->control =
|
|
priv_ep->wa1_trb->control & ~0x1;
|
|
}
|
|
}
|
|
}
|
|
|
|
static void cdns3_free_aligned_request_buf(struct cdns3_device *priv_dev)
|
|
{
|
|
struct cdns3_aligned_buf *buf, *tmp;
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
|
|
list_for_each_entry_safe(buf, tmp, &priv_dev->aligned_buf_list, list) {
|
|
if (!buf->in_use) {
|
|
list_del(&buf->list);
|
|
|
|
/*
|
|
* Re-enable interrupts to free DMA capable memory.
|
|
* Driver can't free this memory with disabled
|
|
* interrupts.
|
|
*/
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
dma_free_coherent(buf->buf);
|
|
kfree(buf);
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
}
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
}
|
|
|
|
static int cdns3_prepare_aligned_request_buf(struct cdns3_request *priv_req)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = priv_req->priv_ep;
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
struct cdns3_aligned_buf *buf;
|
|
|
|
/* check if buffer is aligned to 8. */
|
|
if (!((uintptr_t)priv_req->request.buf & 0x7))
|
|
return 0;
|
|
|
|
buf = priv_req->aligned_buf;
|
|
|
|
if (!buf || priv_req->request.length > buf->size) {
|
|
buf = kzalloc(sizeof(*buf), GFP_ATOMIC);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
buf->size = priv_req->request.length;
|
|
|
|
buf->buf = dma_alloc_coherent(buf->size,
|
|
(unsigned long *)&buf->dma);
|
|
if (!buf->buf) {
|
|
kfree(buf);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (priv_req->aligned_buf) {
|
|
trace_cdns3_free_aligned_request(priv_req);
|
|
priv_req->aligned_buf->in_use = 0;
|
|
#ifndef __UBOOT__
|
|
queue_work(system_freezable_wq,
|
|
&priv_dev->aligned_buf_wq);
|
|
#else
|
|
cdns3_free_aligned_request_buf(priv_dev);
|
|
#endif
|
|
}
|
|
|
|
buf->in_use = 1;
|
|
priv_req->aligned_buf = buf;
|
|
|
|
list_add_tail(&buf->list,
|
|
&priv_dev->aligned_buf_list);
|
|
}
|
|
|
|
if (priv_ep->dir == USB_DIR_IN) {
|
|
memcpy(buf->buf, priv_req->request.buf,
|
|
priv_req->request.length);
|
|
}
|
|
|
|
priv_req->flags |= REQUEST_UNALIGNED;
|
|
trace_cdns3_prepare_aligned_request(priv_req);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns3_wa1_update_guard(struct cdns3_endpoint *priv_ep,
|
|
struct cdns3_trb *trb)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
|
|
if (!priv_ep->wa1_set) {
|
|
u32 doorbell;
|
|
|
|
doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
|
|
|
|
if (doorbell) {
|
|
priv_ep->wa1_cycle_bit = priv_ep->pcs ? TRB_CYCLE : 0;
|
|
priv_ep->wa1_set = 1;
|
|
priv_ep->wa1_trb = trb;
|
|
priv_ep->wa1_trb_index = priv_ep->enqueue;
|
|
trace_cdns3_wa1(priv_ep, "set guard");
|
|
return 0;
|
|
}
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
static void cdns3_wa1_tray_restore_cycle_bit(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep)
|
|
{
|
|
int dma_index;
|
|
u32 doorbell;
|
|
|
|
doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
|
|
dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
|
|
|
|
if (!doorbell || dma_index != priv_ep->wa1_trb_index)
|
|
cdns3_wa1_restore_cycle_bit(priv_ep);
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_run_transfer - start transfer on no-default endpoint hardware
|
|
* @priv_ep: endpoint object
|
|
*
|
|
* Returns zero on success or negative value on failure
|
|
*/
|
|
int cdns3_ep_run_transfer(struct cdns3_endpoint *priv_ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
struct cdns3_request *priv_req;
|
|
struct cdns3_trb *trb;
|
|
dma_addr_t trb_dma;
|
|
u32 togle_pcs = 1;
|
|
int sg_iter = 0;
|
|
int num_trb = 1;
|
|
int address;
|
|
u32 control;
|
|
int pcs;
|
|
|
|
if (num_trb > priv_ep->free_trbs) {
|
|
priv_ep->flags |= EP_RING_FULL;
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
priv_req = to_cdns3_request(request);
|
|
address = priv_ep->endpoint.desc->bEndpointAddress;
|
|
|
|
priv_ep->flags |= EP_PENDING_REQUEST;
|
|
|
|
/* must allocate buffer aligned to 8 */
|
|
if (priv_req->flags & REQUEST_UNALIGNED)
|
|
trb_dma = priv_req->aligned_buf->dma;
|
|
else
|
|
trb_dma = request->dma;
|
|
|
|
trb = priv_ep->trb_pool + priv_ep->enqueue;
|
|
priv_req->start_trb = priv_ep->enqueue;
|
|
priv_req->trb = trb;
|
|
|
|
cdns3_select_ep(priv_ep->cdns3_dev, address);
|
|
|
|
/* prepare ring */
|
|
if ((priv_ep->enqueue + num_trb) >= (priv_ep->num_trbs - 1)) {
|
|
struct cdns3_trb *link_trb;
|
|
int doorbell, dma_index;
|
|
u32 ch_bit = 0;
|
|
|
|
doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
|
|
dma_index = cdns3_get_dma_pos(priv_dev, priv_ep);
|
|
|
|
/* Driver can't update LINK TRB if it is current processed. */
|
|
if (doorbell && dma_index == priv_ep->num_trbs - 1) {
|
|
priv_ep->flags |= EP_DEFERRED_DRDY;
|
|
return -ENOBUFS;
|
|
}
|
|
|
|
/*updating C bt in Link TRB before starting DMA*/
|
|
link_trb = priv_ep->trb_pool + (priv_ep->num_trbs - 1);
|
|
/*
|
|
* For TRs size equal 2 enabling TRB_CHAIN for epXin causes
|
|
* that DMA stuck at the LINK TRB.
|
|
* On the other hand, removing TRB_CHAIN for longer TRs for
|
|
* epXout cause that DMA stuck after handling LINK TRB.
|
|
* To eliminate this strange behavioral driver set TRB_CHAIN
|
|
* bit only for TR size > 2.
|
|
*/
|
|
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC ||
|
|
TRBS_PER_SEGMENT > 2)
|
|
ch_bit = TRB_CHAIN;
|
|
|
|
link_trb->control = ((priv_ep->pcs) ? TRB_CYCLE : 0) |
|
|
TRB_TYPE(TRB_LINK) | TRB_TOGGLE | ch_bit;
|
|
}
|
|
|
|
if (priv_dev->dev_ver <= DEV_VER_V2)
|
|
togle_pcs = cdns3_wa1_update_guard(priv_ep, trb);
|
|
|
|
/* set incorrect Cycle Bit for first trb*/
|
|
control = priv_ep->pcs ? 0 : TRB_CYCLE;
|
|
|
|
do {
|
|
u32 length;
|
|
u16 td_size = 0;
|
|
|
|
/* fill TRB */
|
|
control |= TRB_TYPE(TRB_NORMAL);
|
|
trb->buffer = TRB_BUFFER(trb_dma);
|
|
|
|
length = request->length;
|
|
|
|
if (likely(priv_dev->dev_ver >= DEV_VER_V2))
|
|
td_size = DIV_ROUND_UP(length,
|
|
priv_ep->endpoint.maxpacket);
|
|
|
|
trb->length = TRB_BURST_LEN(priv_ep->trb_burst_size) |
|
|
TRB_LEN(length);
|
|
if (priv_dev->gadget.speed == USB_SPEED_SUPER)
|
|
trb->length |= TRB_TDL_SS_SIZE(td_size);
|
|
else
|
|
control |= TRB_TDL_HS_SIZE(td_size);
|
|
|
|
pcs = priv_ep->pcs ? TRB_CYCLE : 0;
|
|
|
|
/*
|
|
* first trb should be prepared as last to avoid processing
|
|
* transfer to early
|
|
*/
|
|
if (sg_iter != 0)
|
|
control |= pcs;
|
|
|
|
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir) {
|
|
control |= TRB_IOC | TRB_ISP;
|
|
} else {
|
|
/* for last element in TD or in SG list */
|
|
if (sg_iter == (num_trb - 1) && sg_iter != 0)
|
|
control |= pcs | TRB_IOC | TRB_ISP;
|
|
}
|
|
|
|
if (sg_iter)
|
|
trb->control = control;
|
|
else
|
|
priv_req->trb->control = control;
|
|
|
|
control = 0;
|
|
++sg_iter;
|
|
priv_req->end_trb = priv_ep->enqueue;
|
|
cdns3_ep_inc_enq(priv_ep);
|
|
trb = priv_ep->trb_pool + priv_ep->enqueue;
|
|
} while (sg_iter < num_trb);
|
|
|
|
trb = priv_req->trb;
|
|
|
|
priv_req->flags |= REQUEST_PENDING;
|
|
|
|
if (sg_iter == 1)
|
|
trb->control |= TRB_IOC | TRB_ISP;
|
|
|
|
/*
|
|
* Memory barrier - cycle bit must be set before other filds in trb.
|
|
*/
|
|
dmb();
|
|
|
|
/* give the TD to the consumer*/
|
|
if (togle_pcs)
|
|
trb->control = trb->control ^ 1;
|
|
|
|
if (priv_dev->dev_ver <= DEV_VER_V2)
|
|
cdns3_wa1_tray_restore_cycle_bit(priv_dev, priv_ep);
|
|
|
|
trace_cdns3_prepare_trb(priv_ep, priv_req->trb);
|
|
|
|
/*
|
|
* Memory barrier - Cycle Bit must be set before trb->length and
|
|
* trb->buffer fields.
|
|
*/
|
|
dmb();
|
|
|
|
/*
|
|
* For DMULT mode we can set address to transfer ring only once after
|
|
* enabling endpoint.
|
|
*/
|
|
if (priv_ep->flags & EP_UPDATE_EP_TRBADDR) {
|
|
/*
|
|
* Until SW is not ready to handle the OUT transfer the ISO OUT
|
|
* Endpoint should be disabled (EP_CFG.ENABLE = 0).
|
|
* EP_CFG_ENABLE must be set before updating ep_traddr.
|
|
*/
|
|
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir &&
|
|
!(priv_ep->flags & EP_QUIRK_ISO_OUT_EN)) {
|
|
priv_ep->flags |= EP_QUIRK_ISO_OUT_EN;
|
|
cdns3_set_register_bit(&priv_dev->regs->ep_cfg,
|
|
EP_CFG_ENABLE);
|
|
}
|
|
|
|
writel(EP_TRADDR_TRADDR(priv_ep->trb_pool_dma +
|
|
priv_req->start_trb * TRB_SIZE),
|
|
&priv_dev->regs->ep_traddr);
|
|
|
|
priv_ep->flags &= ~EP_UPDATE_EP_TRBADDR;
|
|
}
|
|
|
|
if (!priv_ep->wa1_set && !(priv_ep->flags & EP_STALLED)) {
|
|
trace_cdns3_ring(priv_ep);
|
|
/*clearing TRBERR and EP_STS_DESCMIS before seting DRDY*/
|
|
writel(EP_STS_TRBERR | EP_STS_DESCMIS, &priv_dev->regs->ep_sts);
|
|
writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
|
|
trace_cdns3_doorbell_epx(priv_ep->name,
|
|
readl(&priv_dev->regs->ep_traddr));
|
|
}
|
|
|
|
/* WORKAROUND for transition to L0 */
|
|
__cdns3_gadget_wakeup(priv_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cdns3_set_hw_configuration(struct cdns3_device *priv_dev)
|
|
{
|
|
struct cdns3_endpoint *priv_ep;
|
|
struct usb_ep *ep;
|
|
int val;
|
|
|
|
if (priv_dev->hw_configured_flag)
|
|
return;
|
|
|
|
writel(USB_CONF_CFGSET, &priv_dev->regs->usb_conf);
|
|
writel(EP_CMD_ERDY | EP_CMD_REQ_CMPL, &priv_dev->regs->ep_cmd);
|
|
|
|
cdns3_set_register_bit(&priv_dev->regs->usb_conf,
|
|
USB_CONF_U1EN | USB_CONF_U2EN);
|
|
|
|
/* wait until configuration set */
|
|
readl_poll_timeout_atomic(&priv_dev->regs->usb_sts, val,
|
|
val & USB_STS_CFGSTS_MASK, 100);
|
|
|
|
priv_dev->hw_configured_flag = 1;
|
|
|
|
list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
|
|
priv_ep = ep_to_cdns3_ep(ep);
|
|
if (priv_ep->flags & EP_ENABLED)
|
|
cdns3_start_all_request(priv_dev, priv_ep);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_request_handled - check whether request has been handled by DMA
|
|
*
|
|
* @priv_ep: extended endpoint object.
|
|
* @priv_req: request object for checking
|
|
*
|
|
* Endpoint must be selected before invoking this function.
|
|
*
|
|
* Returns false if request has not been handled by DMA, else returns true.
|
|
*
|
|
* SR - start ring
|
|
* ER - end ring
|
|
* DQ = priv_ep->dequeue - dequeue position
|
|
* EQ = priv_ep->enqueue - enqueue position
|
|
* ST = priv_req->start_trb - index of first TRB in transfer ring
|
|
* ET = priv_req->end_trb - index of last TRB in transfer ring
|
|
* CI = current_index - index of processed TRB by DMA.
|
|
*
|
|
* As first step, function checks if cycle bit for priv_req->start_trb is
|
|
* correct.
|
|
*
|
|
* some rules:
|
|
* 1. priv_ep->dequeue never exceed current_index.
|
|
* 2 priv_ep->enqueue never exceed priv_ep->dequeue
|
|
* 3. exception: priv_ep->enqueue == priv_ep->dequeue
|
|
* and priv_ep->free_trbs is zero.
|
|
* This case indicate that TR is full.
|
|
*
|
|
* Then We can split recognition into two parts:
|
|
* Case 1 - priv_ep->dequeue < current_index
|
|
* SR ... EQ ... DQ ... CI ... ER
|
|
* SR ... DQ ... CI ... EQ ... ER
|
|
*
|
|
* Request has been handled by DMA if ST and ET is between DQ and CI.
|
|
*
|
|
* Case 2 - priv_ep->dequeue > current_index
|
|
* This situation take place when CI go through the LINK TRB at the end of
|
|
* transfer ring.
|
|
* SR ... CI ... EQ ... DQ ... ER
|
|
*
|
|
* Request has been handled by DMA if ET is less then CI or
|
|
* ET is greater or equal DQ.
|
|
*/
|
|
static bool cdns3_request_handled(struct cdns3_endpoint *priv_ep,
|
|
struct cdns3_request *priv_req)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
struct cdns3_trb *trb = priv_req->trb;
|
|
int current_index = 0;
|
|
int handled = 0;
|
|
int doorbell;
|
|
|
|
current_index = cdns3_get_dma_pos(priv_dev, priv_ep);
|
|
doorbell = !!(readl(&priv_dev->regs->ep_cmd) & EP_CMD_DRDY);
|
|
|
|
trb = &priv_ep->trb_pool[priv_req->start_trb];
|
|
|
|
if ((trb->control & TRB_CYCLE) != priv_ep->ccs)
|
|
goto finish;
|
|
|
|
if (doorbell == 1 && current_index == priv_ep->dequeue)
|
|
goto finish;
|
|
|
|
/* The corner case for TRBS_PER_SEGMENT equal 2). */
|
|
if (TRBS_PER_SEGMENT == 2 && priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
|
|
handled = 1;
|
|
goto finish;
|
|
}
|
|
|
|
if (priv_ep->enqueue == priv_ep->dequeue &&
|
|
priv_ep->free_trbs == 0) {
|
|
handled = 1;
|
|
} else if (priv_ep->dequeue < current_index) {
|
|
if ((current_index == (priv_ep->num_trbs - 1)) &&
|
|
!priv_ep->dequeue)
|
|
goto finish;
|
|
|
|
if (priv_req->end_trb >= priv_ep->dequeue &&
|
|
priv_req->end_trb < current_index)
|
|
handled = 1;
|
|
} else if (priv_ep->dequeue > current_index) {
|
|
if (priv_req->end_trb < current_index ||
|
|
priv_req->end_trb >= priv_ep->dequeue)
|
|
handled = 1;
|
|
}
|
|
|
|
finish:
|
|
trace_cdns3_request_handled(priv_req, current_index, handled);
|
|
|
|
return handled;
|
|
}
|
|
|
|
static void cdns3_transfer_completed(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_request *priv_req;
|
|
struct usb_request *request;
|
|
struct cdns3_trb *trb;
|
|
|
|
while (!list_empty(&priv_ep->pending_req_list)) {
|
|
request = cdns3_next_request(&priv_ep->pending_req_list);
|
|
priv_req = to_cdns3_request(request);
|
|
|
|
/* Re-select endpoint. It could be changed by other CPU during
|
|
* handling usb_gadget_giveback_request.
|
|
*/
|
|
#ifndef __UBOOT__
|
|
cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
|
|
#else
|
|
cdns3_select_ep(priv_dev,
|
|
priv_ep->endpoint.desc->bEndpointAddress);
|
|
#endif
|
|
|
|
if (!cdns3_request_handled(priv_ep, priv_req))
|
|
goto prepare_next_td;
|
|
|
|
trb = priv_ep->trb_pool + priv_ep->dequeue;
|
|
trace_cdns3_complete_trb(priv_ep, trb);
|
|
|
|
if (trb != priv_req->trb)
|
|
dev_warn(priv_dev->dev,
|
|
"request_trb=0x%p, queue_trb=0x%p\n",
|
|
priv_req->trb, trb);
|
|
|
|
request->actual = TRB_LEN(le32_to_cpu(trb->length));
|
|
cdns3_move_deq_to_next_trb(priv_req);
|
|
cdns3_gadget_giveback(priv_ep, priv_req, 0);
|
|
|
|
if (priv_ep->type != USB_ENDPOINT_XFER_ISOC &&
|
|
TRBS_PER_SEGMENT == 2)
|
|
break;
|
|
}
|
|
priv_ep->flags &= ~EP_PENDING_REQUEST;
|
|
|
|
prepare_next_td:
|
|
if (!(priv_ep->flags & EP_STALLED) &&
|
|
!(priv_ep->flags & EP_STALL_PENDING))
|
|
cdns3_start_all_request(priv_dev, priv_ep);
|
|
}
|
|
|
|
void cdns3_rearm_transfer(struct cdns3_endpoint *priv_ep, u8 rearm)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
|
|
cdns3_wa1_restore_cycle_bit(priv_ep);
|
|
|
|
if (rearm) {
|
|
trace_cdns3_ring(priv_ep);
|
|
|
|
/* Cycle Bit must be updated before arming DMA. */
|
|
dmb();
|
|
writel(EP_CMD_DRDY, &priv_dev->regs->ep_cmd);
|
|
|
|
__cdns3_gadget_wakeup(priv_dev);
|
|
|
|
trace_cdns3_doorbell_epx(priv_ep->name,
|
|
readl(&priv_dev->regs->ep_traddr));
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_check_ep_interrupt_proceed - Processes interrupt related to endpoint
|
|
* @priv_ep: endpoint object
|
|
*
|
|
* Returns 0
|
|
*/
|
|
static int cdns3_check_ep_interrupt_proceed(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
u32 ep_sts_reg;
|
|
|
|
#ifndef __UBOOT__
|
|
cdns3_select_ep(priv_dev, priv_ep->endpoint.address);
|
|
#else
|
|
cdns3_select_ep(priv_dev, priv_ep->endpoint.desc->bEndpointAddress);
|
|
#endif
|
|
|
|
trace_cdns3_epx_irq(priv_dev, priv_ep);
|
|
|
|
ep_sts_reg = readl(&priv_dev->regs->ep_sts);
|
|
writel(ep_sts_reg, &priv_dev->regs->ep_sts);
|
|
|
|
if (ep_sts_reg & EP_STS_TRBERR) {
|
|
if (priv_ep->flags & EP_STALL_PENDING &&
|
|
!(ep_sts_reg & EP_STS_DESCMIS &&
|
|
priv_dev->dev_ver < DEV_VER_V2)) {
|
|
cdns3_ep_stall_flush(priv_ep);
|
|
}
|
|
|
|
/*
|
|
* For isochronous transfer driver completes request on
|
|
* IOC or on TRBERR. IOC appears only when device receive
|
|
* OUT data packet. If host disable stream or lost some packet
|
|
* then the only way to finish all queued transfer is to do it
|
|
* on TRBERR event.
|
|
*/
|
|
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC &&
|
|
!priv_ep->wa1_set) {
|
|
if (!priv_ep->dir) {
|
|
u32 ep_cfg = readl(&priv_dev->regs->ep_cfg);
|
|
|
|
ep_cfg &= ~EP_CFG_ENABLE;
|
|
writel(ep_cfg, &priv_dev->regs->ep_cfg);
|
|
priv_ep->flags &= ~EP_QUIRK_ISO_OUT_EN;
|
|
}
|
|
cdns3_transfer_completed(priv_dev, priv_ep);
|
|
} else if (!(priv_ep->flags & EP_STALLED) &&
|
|
!(priv_ep->flags & EP_STALL_PENDING)) {
|
|
if (priv_ep->flags & EP_DEFERRED_DRDY) {
|
|
priv_ep->flags &= ~EP_DEFERRED_DRDY;
|
|
cdns3_start_all_request(priv_dev, priv_ep);
|
|
} else {
|
|
cdns3_rearm_transfer(priv_ep,
|
|
priv_ep->wa1_set);
|
|
}
|
|
}
|
|
}
|
|
|
|
if ((ep_sts_reg & EP_STS_IOC) || (ep_sts_reg & EP_STS_ISP)) {
|
|
if (priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN) {
|
|
if (ep_sts_reg & EP_STS_ISP)
|
|
priv_ep->flags |= EP_QUIRK_END_TRANSFER;
|
|
else
|
|
priv_ep->flags &= ~EP_QUIRK_END_TRANSFER;
|
|
}
|
|
|
|
cdns3_transfer_completed(priv_dev, priv_ep);
|
|
}
|
|
|
|
/*
|
|
* WA2: this condition should only be meet when
|
|
* priv_ep->flags & EP_QUIRK_EXTRA_BUF_DET or
|
|
* priv_ep->flags & EP_QUIRK_EXTRA_BUF_EN.
|
|
* In other cases this interrupt will be disabled/
|
|
*/
|
|
if (ep_sts_reg & EP_STS_DESCMIS && priv_dev->dev_ver < DEV_VER_V2 &&
|
|
!(priv_ep->flags & EP_STALLED))
|
|
cdns3_wa2_descmissing_packet(priv_ep);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cdns3_disconnect_gadget(struct cdns3_device *priv_dev)
|
|
{
|
|
if (priv_dev->gadget_driver && priv_dev->gadget_driver->disconnect) {
|
|
spin_unlock(&priv_dev->lock);
|
|
priv_dev->gadget_driver->disconnect(&priv_dev->gadget);
|
|
spin_lock(&priv_dev->lock);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_check_usb_interrupt_proceed - Processes interrupt related to device
|
|
* @priv_dev: extended gadget object
|
|
* @usb_ists: bitmap representation of device's reported interrupts
|
|
* (usb_ists register value)
|
|
*/
|
|
static void cdns3_check_usb_interrupt_proceed(struct cdns3_device *priv_dev,
|
|
u32 usb_ists)
|
|
{
|
|
int speed = 0;
|
|
|
|
trace_cdns3_usb_irq(priv_dev, usb_ists);
|
|
if (usb_ists & USB_ISTS_L1ENTI) {
|
|
/*
|
|
* WORKAROUND: CDNS3 controller has issue with hardware resuming
|
|
* from L1. To fix it, if any DMA transfer is pending driver
|
|
* must starts driving resume signal immediately.
|
|
*/
|
|
if (readl(&priv_dev->regs->drbl))
|
|
__cdns3_gadget_wakeup(priv_dev);
|
|
}
|
|
|
|
/* Connection detected */
|
|
if (usb_ists & (USB_ISTS_CON2I | USB_ISTS_CONI)) {
|
|
speed = cdns3_get_speed(priv_dev);
|
|
priv_dev->gadget.speed = speed;
|
|
usb_gadget_set_state(&priv_dev->gadget, USB_STATE_POWERED);
|
|
cdns3_ep0_config(priv_dev);
|
|
}
|
|
|
|
/* Disconnection detected */
|
|
if (usb_ists & (USB_ISTS_DIS2I | USB_ISTS_DISI)) {
|
|
cdns3_disconnect_gadget(priv_dev);
|
|
priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
|
|
cdns3_hw_reset_eps_config(priv_dev);
|
|
}
|
|
|
|
if (usb_ists & (USB_ISTS_L2ENTI | USB_ISTS_U3ENTI)) {
|
|
if (priv_dev->gadget_driver &&
|
|
priv_dev->gadget_driver->suspend) {
|
|
spin_unlock(&priv_dev->lock);
|
|
priv_dev->gadget_driver->suspend(&priv_dev->gadget);
|
|
spin_lock(&priv_dev->lock);
|
|
}
|
|
}
|
|
|
|
if (usb_ists & (USB_ISTS_L2EXTI | USB_ISTS_U3EXTI)) {
|
|
if (priv_dev->gadget_driver &&
|
|
priv_dev->gadget_driver->resume) {
|
|
spin_unlock(&priv_dev->lock);
|
|
priv_dev->gadget_driver->resume(&priv_dev->gadget);
|
|
spin_lock(&priv_dev->lock);
|
|
}
|
|
}
|
|
|
|
/* reset*/
|
|
if (usb_ists & (USB_ISTS_UWRESI | USB_ISTS_UHRESI | USB_ISTS_U2RESI)) {
|
|
if (priv_dev->gadget_driver) {
|
|
spin_unlock(&priv_dev->lock);
|
|
usb_gadget_udc_reset(&priv_dev->gadget,
|
|
priv_dev->gadget_driver);
|
|
spin_lock(&priv_dev->lock);
|
|
|
|
/*read again to check the actual speed*/
|
|
speed = cdns3_get_speed(priv_dev);
|
|
priv_dev->gadget.speed = speed;
|
|
cdns3_hw_reset_eps_config(priv_dev);
|
|
cdns3_ep0_config(priv_dev);
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_device_irq_handler- interrupt handler for device part of controller
|
|
*
|
|
* @irq: irq number for cdns3 core device
|
|
* @data: structure of cdns3
|
|
*
|
|
* Returns IRQ_HANDLED or IRQ_NONE
|
|
*/
|
|
static irqreturn_t cdns3_device_irq_handler(int irq, void *data)
|
|
{
|
|
struct cdns3_device *priv_dev;
|
|
struct cdns3 *cdns = data;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
u32 reg;
|
|
|
|
priv_dev = cdns->gadget_dev;
|
|
|
|
/* check USB device interrupt */
|
|
reg = readl(&priv_dev->regs->usb_ists);
|
|
if (reg) {
|
|
/* After masking interrupts the new interrupts won't be
|
|
* reported in usb_ists/ep_ists. In order to not lose some
|
|
* of them driver disables only detected interrupts.
|
|
* They will be enabled ASAP after clearing source of
|
|
* interrupt. This an unusual behavior only applies to
|
|
* usb_ists register.
|
|
*/
|
|
reg = ~reg & readl(&priv_dev->regs->usb_ien);
|
|
/* mask deferred interrupt. */
|
|
writel(reg, &priv_dev->regs->usb_ien);
|
|
ret = IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
/* check endpoint interrupt */
|
|
reg = readl(&priv_dev->regs->ep_ists);
|
|
if (reg) {
|
|
writel(0, &priv_dev->regs->ep_ien);
|
|
ret = IRQ_WAKE_THREAD;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_device_thread_irq_handler- interrupt handler for device part
|
|
* of controller
|
|
*
|
|
* @irq: irq number for cdns3 core device
|
|
* @data: structure of cdns3
|
|
*
|
|
* Returns IRQ_HANDLED or IRQ_NONE
|
|
*/
|
|
static irqreturn_t cdns3_device_thread_irq_handler(int irq, void *data)
|
|
{
|
|
struct cdns3_device *priv_dev;
|
|
struct cdns3 *cdns = data;
|
|
irqreturn_t ret = IRQ_NONE;
|
|
unsigned long flags;
|
|
int bit;
|
|
u32 reg;
|
|
|
|
priv_dev = cdns->gadget_dev;
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
|
|
reg = readl(&priv_dev->regs->usb_ists);
|
|
if (reg) {
|
|
writel(reg, &priv_dev->regs->usb_ists);
|
|
writel(USB_IEN_INIT, &priv_dev->regs->usb_ien);
|
|
cdns3_check_usb_interrupt_proceed(priv_dev, reg);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
reg = readl(&priv_dev->regs->ep_ists);
|
|
|
|
/* handle default endpoint OUT */
|
|
if (reg & EP_ISTS_EP_OUT0) {
|
|
cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_OUT);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
/* handle default endpoint IN */
|
|
if (reg & EP_ISTS_EP_IN0) {
|
|
cdns3_check_ep0_interrupt_proceed(priv_dev, USB_DIR_IN);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
/* check if interrupt from non default endpoint, if no exit */
|
|
reg &= ~(EP_ISTS_EP_OUT0 | EP_ISTS_EP_IN0);
|
|
if (!reg)
|
|
goto irqend;
|
|
|
|
for_each_set_bit(bit, (unsigned long *)®,
|
|
sizeof(u32) * BITS_PER_BYTE) {
|
|
cdns3_check_ep_interrupt_proceed(priv_dev->eps[bit]);
|
|
ret = IRQ_HANDLED;
|
|
}
|
|
|
|
irqend:
|
|
writel(~0, &priv_dev->regs->ep_ien);
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_onchip_buffer_reserve - Try to reserve onchip buf for EP
|
|
*
|
|
* The real reservation will occur during write to EP_CFG register,
|
|
* this function is used to check if the 'size' reservation is allowed.
|
|
*
|
|
* @priv_dev: extended gadget object
|
|
* @size: the size (KB) for EP would like to allocate
|
|
* @is_in: endpoint direction
|
|
*
|
|
* Return 0 if the required size can met or negative value on failure
|
|
*/
|
|
static int cdns3_ep_onchip_buffer_reserve(struct cdns3_device *priv_dev,
|
|
int size, int is_in)
|
|
{
|
|
int remained;
|
|
|
|
/* 2KB are reserved for EP0*/
|
|
remained = priv_dev->onchip_buffers - priv_dev->onchip_used_size - 2;
|
|
|
|
if (is_in) {
|
|
if (remained < size)
|
|
return -EPERM;
|
|
|
|
priv_dev->onchip_used_size += size;
|
|
} else {
|
|
int required;
|
|
|
|
/**
|
|
* ALL OUT EPs are shared the same chunk onchip memory, so
|
|
* driver checks if it already has assigned enough buffers
|
|
*/
|
|
if (priv_dev->out_mem_is_allocated >= size)
|
|
return 0;
|
|
|
|
required = size - priv_dev->out_mem_is_allocated;
|
|
|
|
if (required > remained)
|
|
return -EPERM;
|
|
|
|
priv_dev->out_mem_is_allocated += required;
|
|
priv_dev->onchip_used_size += required;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void cdns3_configure_dmult(struct cdns3_device *priv_dev,
|
|
struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
|
|
|
|
/* For dev_ver > DEV_VER_V2 DMULT is configured per endpoint */
|
|
if (priv_dev->dev_ver <= DEV_VER_V2)
|
|
writel(USB_CONF_DMULT, ®s->usb_conf);
|
|
|
|
if (priv_dev->dev_ver == DEV_VER_V2)
|
|
writel(USB_CONF2_EN_TDL_TRB, ®s->usb_conf2);
|
|
|
|
if (priv_dev->dev_ver >= DEV_VER_V3 && priv_ep) {
|
|
u32 mask;
|
|
|
|
if (priv_ep->dir)
|
|
mask = BIT(priv_ep->num + 16);
|
|
else
|
|
mask = BIT(priv_ep->num);
|
|
|
|
if (priv_ep->type != USB_ENDPOINT_XFER_ISOC) {
|
|
cdns3_set_register_bit(®s->tdl_from_trb, mask);
|
|
cdns3_set_register_bit(®s->tdl_beh, mask);
|
|
cdns3_set_register_bit(®s->tdl_beh2, mask);
|
|
cdns3_set_register_bit(®s->dma_adv_td, mask);
|
|
}
|
|
|
|
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
|
|
cdns3_set_register_bit(®s->tdl_from_trb, mask);
|
|
|
|
cdns3_set_register_bit(®s->dtrans, mask);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_ep_config Configure hardware endpoint
|
|
* @priv_ep: extended endpoint object
|
|
*/
|
|
void cdns3_ep_config(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
bool is_iso_ep = (priv_ep->type == USB_ENDPOINT_XFER_ISOC);
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
u32 bEndpointAddress = priv_ep->num | priv_ep->dir;
|
|
u32 max_packet_size = 0;
|
|
u8 maxburst = 0;
|
|
u32 ep_cfg = 0;
|
|
u8 buffering;
|
|
u8 mult = 0;
|
|
int ret;
|
|
|
|
buffering = CDNS3_EP_BUF_SIZE - 1;
|
|
|
|
cdns3_configure_dmult(priv_dev, priv_ep);
|
|
|
|
switch (priv_ep->type) {
|
|
case USB_ENDPOINT_XFER_INT:
|
|
ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_INT);
|
|
|
|
if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
|
|
priv_dev->dev_ver > DEV_VER_V2)
|
|
ep_cfg |= EP_CFG_TDL_CHK;
|
|
break;
|
|
case USB_ENDPOINT_XFER_BULK:
|
|
ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_BULK);
|
|
|
|
if ((priv_dev->dev_ver == DEV_VER_V2 && !priv_ep->dir) ||
|
|
priv_dev->dev_ver > DEV_VER_V2)
|
|
ep_cfg |= EP_CFG_TDL_CHK;
|
|
break;
|
|
default:
|
|
ep_cfg = EP_CFG_EPTYPE(USB_ENDPOINT_XFER_ISOC);
|
|
mult = CDNS3_EP_ISO_HS_MULT - 1;
|
|
buffering = mult + 1;
|
|
}
|
|
|
|
switch (priv_dev->gadget.speed) {
|
|
case USB_SPEED_FULL:
|
|
max_packet_size = is_iso_ep ? 1023 : 64;
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
max_packet_size = is_iso_ep ? 1024 : 512;
|
|
break;
|
|
case USB_SPEED_SUPER:
|
|
/* It's limitation that driver assumes in driver. */
|
|
mult = 0;
|
|
max_packet_size = 1024;
|
|
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
|
|
maxburst = CDNS3_EP_ISO_SS_BURST - 1;
|
|
buffering = (mult + 1) *
|
|
(maxburst + 1);
|
|
|
|
if (priv_ep->interval > 1)
|
|
buffering++;
|
|
} else {
|
|
maxburst = CDNS3_EP_BUF_SIZE - 1;
|
|
}
|
|
break;
|
|
default:
|
|
/* all other speed are not supported */
|
|
return;
|
|
}
|
|
|
|
if (max_packet_size == 1024)
|
|
priv_ep->trb_burst_size = 128;
|
|
else if (max_packet_size >= 512)
|
|
priv_ep->trb_burst_size = 64;
|
|
else
|
|
priv_ep->trb_burst_size = 16;
|
|
|
|
ret = cdns3_ep_onchip_buffer_reserve(priv_dev, buffering + 1,
|
|
!!priv_ep->dir);
|
|
if (ret) {
|
|
dev_err(priv_dev->dev, "onchip mem is full, ep is invalid\n");
|
|
return;
|
|
}
|
|
|
|
ep_cfg |= EP_CFG_MAXPKTSIZE(max_packet_size) |
|
|
EP_CFG_MULT(mult) |
|
|
EP_CFG_BUFFERING(buffering) |
|
|
EP_CFG_MAXBURST(maxburst);
|
|
|
|
cdns3_select_ep(priv_dev, bEndpointAddress);
|
|
writel(ep_cfg, &priv_dev->regs->ep_cfg);
|
|
|
|
dev_dbg(priv_dev->dev, "Configure %s: with val %08x\n",
|
|
priv_ep->name, ep_cfg);
|
|
}
|
|
|
|
/* Find correct direction for HW endpoint according to description */
|
|
static int cdns3_ep_dir_is_correct(struct usb_endpoint_descriptor *desc,
|
|
struct cdns3_endpoint *priv_ep)
|
|
{
|
|
return (priv_ep->endpoint.caps.dir_in && usb_endpoint_dir_in(desc)) ||
|
|
(priv_ep->endpoint.caps.dir_out && usb_endpoint_dir_out(desc));
|
|
}
|
|
|
|
static struct
|
|
cdns3_endpoint *cdns3_find_available_ep(struct cdns3_device *priv_dev,
|
|
struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct usb_ep *ep;
|
|
struct cdns3_endpoint *priv_ep;
|
|
|
|
list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
|
|
unsigned long num;
|
|
/* ep name pattern likes epXin or epXout */
|
|
char c[2] = {ep->name[2], '\0'};
|
|
|
|
num = dectoul(c, NULL);
|
|
|
|
priv_ep = ep_to_cdns3_ep(ep);
|
|
if (cdns3_ep_dir_is_correct(desc, priv_ep)) {
|
|
if (!(priv_ep->flags & EP_CLAIMED)) {
|
|
priv_ep->num = num;
|
|
return priv_ep;
|
|
}
|
|
}
|
|
}
|
|
|
|
return ERR_PTR(-ENOENT);
|
|
}
|
|
|
|
/*
|
|
* Cadence IP has one limitation that all endpoints must be configured
|
|
* (Type & MaxPacketSize) before setting configuration through hardware
|
|
* register, it means we can't change endpoints configuration after
|
|
* set_configuration.
|
|
*
|
|
* This function set EP_CLAIMED flag which is added when the gadget driver
|
|
* uses usb_ep_autoconfig to configure specific endpoint;
|
|
* When the udc driver receives set_configurion request,
|
|
* it goes through all claimed endpoints, and configure all endpoints
|
|
* accordingly.
|
|
*
|
|
* At usb_ep_ops.enable/disable, we only enable and disable endpoint through
|
|
* ep_cfg register which can be changed after set_configuration, and do
|
|
* some software operation accordingly.
|
|
*/
|
|
static struct
|
|
usb_ep *cdns3_gadget_match_ep(struct usb_gadget *gadget,
|
|
struct usb_endpoint_descriptor *desc,
|
|
struct usb_ss_ep_comp_descriptor *comp_desc)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
struct cdns3_endpoint *priv_ep;
|
|
unsigned long flags;
|
|
|
|
priv_ep = cdns3_find_available_ep(priv_dev, desc);
|
|
if (IS_ERR(priv_ep)) {
|
|
dev_err(priv_dev->dev, "no available ep\n");
|
|
return NULL;
|
|
}
|
|
|
|
dev_dbg(priv_dev->dev, "match endpoint: %s\n", priv_ep->name);
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
priv_ep->endpoint.desc = desc;
|
|
priv_ep->dir = usb_endpoint_dir_in(desc) ? USB_DIR_IN : USB_DIR_OUT;
|
|
priv_ep->type = usb_endpoint_type(desc);
|
|
priv_ep->flags |= EP_CLAIMED;
|
|
priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
|
|
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
return &priv_ep->endpoint;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_alloc_request Allocates request
|
|
* @ep: endpoint object associated with request
|
|
* @gfp_flags: gfp flags
|
|
*
|
|
* Returns allocated request address, NULL on allocation error
|
|
*/
|
|
struct usb_request *cdns3_gadget_ep_alloc_request(struct usb_ep *ep,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
|
|
struct cdns3_request *priv_req;
|
|
|
|
priv_req = kzalloc(sizeof(*priv_req), gfp_flags);
|
|
if (!priv_req)
|
|
return NULL;
|
|
|
|
priv_req->priv_ep = priv_ep;
|
|
|
|
trace_cdns3_alloc_request(priv_req);
|
|
return &priv_req->request;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_free_request Free memory occupied by request
|
|
* @ep: endpoint object associated with request
|
|
* @request: request to free memory
|
|
*/
|
|
void cdns3_gadget_ep_free_request(struct usb_ep *ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct cdns3_request *priv_req = to_cdns3_request(request);
|
|
|
|
if (priv_req->aligned_buf)
|
|
priv_req->aligned_buf->in_use = 0;
|
|
|
|
trace_cdns3_free_request(priv_req);
|
|
kfree(priv_req);
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_enable Enable endpoint
|
|
* @ep: endpoint object
|
|
* @desc: endpoint descriptor
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
static int cdns3_gadget_ep_enable(struct usb_ep *ep,
|
|
const struct usb_endpoint_descriptor *desc)
|
|
{
|
|
struct cdns3_endpoint *priv_ep;
|
|
struct cdns3_device *priv_dev;
|
|
u32 reg = EP_STS_EN_TRBERREN;
|
|
u32 bEndpointAddress;
|
|
unsigned long flags;
|
|
int enable = 1;
|
|
int ret;
|
|
int val;
|
|
|
|
priv_ep = ep_to_cdns3_ep(ep);
|
|
priv_dev = priv_ep->cdns3_dev;
|
|
|
|
if (!ep || !desc || desc->bDescriptorType != USB_DT_ENDPOINT) {
|
|
dev_dbg(priv_dev->dev, "usbss: invalid parameters\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!desc->wMaxPacketSize) {
|
|
dev_err(priv_dev->dev, "usbss: missing wMaxPacketSize\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (WARN_ON(priv_ep->flags & EP_ENABLED))
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
|
|
priv_ep->endpoint.desc = desc;
|
|
priv_ep->type = usb_endpoint_type(desc);
|
|
priv_ep->interval = desc->bInterval ? BIT(desc->bInterval - 1) : 0;
|
|
|
|
if (priv_ep->interval > ISO_MAX_INTERVAL &&
|
|
priv_ep->type == USB_ENDPOINT_XFER_ISOC) {
|
|
dev_err(priv_dev->dev, "Driver is limited to %d period\n",
|
|
ISO_MAX_INTERVAL);
|
|
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
ret = cdns3_allocate_trb_pool(priv_ep);
|
|
|
|
if (ret)
|
|
goto exit;
|
|
|
|
bEndpointAddress = priv_ep->num | priv_ep->dir;
|
|
cdns3_select_ep(priv_dev, bEndpointAddress);
|
|
|
|
trace_cdns3_gadget_ep_enable(priv_ep);
|
|
|
|
writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
|
|
|
|
ret = readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
|
|
!(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
|
|
1000);
|
|
|
|
if (unlikely(ret)) {
|
|
cdns3_free_trb_pool(priv_ep);
|
|
ret = -EINVAL;
|
|
goto exit;
|
|
}
|
|
|
|
/* enable interrupt for selected endpoint */
|
|
cdns3_set_register_bit(&priv_dev->regs->ep_ien,
|
|
BIT(cdns3_ep_addr_to_index(bEndpointAddress)));
|
|
|
|
if (priv_dev->dev_ver < DEV_VER_V2)
|
|
cdns3_wa2_enable_detection(priv_dev, priv_ep, reg);
|
|
|
|
writel(reg, &priv_dev->regs->ep_sts_en);
|
|
|
|
/*
|
|
* For some versions of controller at some point during ISO OUT traffic
|
|
* DMA reads Transfer Ring for the EP which has never got doorbell.
|
|
* This issue was detected only on simulation, but to avoid this issue
|
|
* driver add protection against it. To fix it driver enable ISO OUT
|
|
* endpoint before setting DRBL. This special treatment of ISO OUT
|
|
* endpoints are recommended by controller specification.
|
|
*/
|
|
if (priv_ep->type == USB_ENDPOINT_XFER_ISOC && !priv_ep->dir)
|
|
enable = 0;
|
|
|
|
if (enable)
|
|
cdns3_set_register_bit(&priv_dev->regs->ep_cfg, EP_CFG_ENABLE);
|
|
|
|
ep->desc = desc;
|
|
priv_ep->flags &= ~(EP_PENDING_REQUEST | EP_STALLED | EP_STALL_PENDING |
|
|
EP_QUIRK_ISO_OUT_EN | EP_QUIRK_EXTRA_BUF_EN);
|
|
priv_ep->flags |= EP_ENABLED | EP_UPDATE_EP_TRBADDR;
|
|
priv_ep->wa1_set = 0;
|
|
priv_ep->enqueue = 0;
|
|
priv_ep->dequeue = 0;
|
|
reg = readl(&priv_dev->regs->ep_sts);
|
|
priv_ep->pcs = !!EP_STS_CCS(reg);
|
|
priv_ep->ccs = !!EP_STS_CCS(reg);
|
|
/* one TRB is reserved for link TRB used in DMULT mode*/
|
|
priv_ep->free_trbs = priv_ep->num_trbs - 1;
|
|
exit:
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_disable Disable endpoint
|
|
* @ep: endpoint object
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
static int cdns3_gadget_ep_disable(struct usb_ep *ep)
|
|
{
|
|
struct cdns3_endpoint *priv_ep;
|
|
struct cdns3_request *priv_req;
|
|
struct cdns3_device *priv_dev;
|
|
struct usb_request *request;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
u32 ep_cfg;
|
|
int val;
|
|
|
|
if (!ep) {
|
|
pr_err("usbss: invalid parameters\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv_ep = ep_to_cdns3_ep(ep);
|
|
priv_dev = priv_ep->cdns3_dev;
|
|
|
|
if (WARN_ON(!(priv_ep->flags & EP_ENABLED)))
|
|
return 0;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
|
|
trace_cdns3_gadget_ep_disable(priv_ep);
|
|
|
|
cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
|
|
|
|
ep_cfg = readl(&priv_dev->regs->ep_cfg);
|
|
ep_cfg &= ~EP_CFG_ENABLE;
|
|
writel(ep_cfg, &priv_dev->regs->ep_cfg);
|
|
|
|
/**
|
|
* Driver needs some time before resetting endpoint.
|
|
* It need waits for clearing DBUSY bit or for timeout expired.
|
|
* 10us is enough time for controller to stop transfer.
|
|
*/
|
|
readl_poll_timeout_atomic(&priv_dev->regs->ep_sts, val,
|
|
!(val & EP_STS_DBUSY), 10);
|
|
writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
|
|
|
|
readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
|
|
!(val & (EP_CMD_CSTALL | EP_CMD_EPRST)),
|
|
1000);
|
|
if (unlikely(ret))
|
|
dev_err(priv_dev->dev, "Timeout: %s resetting failed.\n",
|
|
priv_ep->name);
|
|
|
|
while (!list_empty(&priv_ep->pending_req_list)) {
|
|
request = cdns3_next_request(&priv_ep->pending_req_list);
|
|
|
|
cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
|
|
-ESHUTDOWN);
|
|
}
|
|
|
|
while (!list_empty(&priv_ep->wa2_descmiss_req_list)) {
|
|
priv_req = cdns3_next_priv_request(&priv_ep->wa2_descmiss_req_list);
|
|
|
|
kfree(priv_req->request.buf);
|
|
cdns3_gadget_ep_free_request(&priv_ep->endpoint,
|
|
&priv_req->request);
|
|
list_del_init(&priv_req->list);
|
|
--priv_ep->wa2_counter;
|
|
}
|
|
|
|
while (!list_empty(&priv_ep->deferred_req_list)) {
|
|
request = cdns3_next_request(&priv_ep->deferred_req_list);
|
|
|
|
cdns3_gadget_giveback(priv_ep, to_cdns3_request(request),
|
|
-ESHUTDOWN);
|
|
}
|
|
|
|
priv_ep->descmis_req = NULL;
|
|
|
|
ep->desc = NULL;
|
|
priv_ep->flags &= ~EP_ENABLED;
|
|
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_queue Transfer data on endpoint
|
|
* @ep: endpoint object
|
|
* @request: request object
|
|
* @gfp_flags: gfp flags
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
static int __cdns3_gadget_ep_queue(struct usb_ep *ep,
|
|
struct usb_request *request,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
struct cdns3_request *priv_req;
|
|
int ret = 0;
|
|
|
|
request->actual = 0;
|
|
request->status = -EINPROGRESS;
|
|
priv_req = to_cdns3_request(request);
|
|
trace_cdns3_ep_queue(priv_req);
|
|
|
|
if (priv_dev->dev_ver < DEV_VER_V2) {
|
|
ret = cdns3_wa2_gadget_ep_queue(priv_dev, priv_ep,
|
|
priv_req);
|
|
|
|
if (ret == EINPROGRESS)
|
|
return 0;
|
|
}
|
|
|
|
ret = cdns3_prepare_aligned_request_buf(priv_req);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
ret = usb_gadget_map_request(&priv_dev->gadget, request,
|
|
usb_endpoint_dir_in(ep->desc));
|
|
if (ret)
|
|
return ret;
|
|
|
|
list_add_tail(&request->list, &priv_ep->deferred_req_list);
|
|
|
|
/*
|
|
* If hardware endpoint configuration has not been set yet then
|
|
* just queue request in deferred list. Transfer will be started in
|
|
* cdns3_set_hw_configuration.
|
|
*/
|
|
if (priv_dev->hw_configured_flag && !(priv_ep->flags & EP_STALLED) &&
|
|
!(priv_ep->flags & EP_STALL_PENDING))
|
|
cdns3_start_all_request(priv_dev, priv_ep);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns3_gadget_ep_queue(struct usb_ep *ep, struct usb_request *request,
|
|
gfp_t gfp_flags)
|
|
{
|
|
struct usb_request *zlp_request;
|
|
struct cdns3_endpoint *priv_ep;
|
|
struct cdns3_device *priv_dev;
|
|
unsigned long flags;
|
|
int ret;
|
|
|
|
if (!request || !ep)
|
|
return -EINVAL;
|
|
|
|
priv_ep = ep_to_cdns3_ep(ep);
|
|
priv_dev = priv_ep->cdns3_dev;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
|
|
ret = __cdns3_gadget_ep_queue(ep, request, gfp_flags);
|
|
|
|
if (ret == 0 && request->zero && request->length &&
|
|
(request->length % ep->maxpacket == 0)) {
|
|
struct cdns3_request *priv_req;
|
|
|
|
zlp_request = cdns3_gadget_ep_alloc_request(ep, GFP_ATOMIC);
|
|
zlp_request->buf = priv_dev->zlp_buf;
|
|
zlp_request->length = 0;
|
|
|
|
priv_req = to_cdns3_request(zlp_request);
|
|
priv_req->flags |= REQUEST_ZLP;
|
|
|
|
dev_dbg(priv_dev->dev, "Queuing ZLP for endpoint: %s\n",
|
|
priv_ep->name);
|
|
ret = __cdns3_gadget_ep_queue(ep, zlp_request, gfp_flags);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_dequeue Remove request from transfer queue
|
|
* @ep: endpoint object associated with request
|
|
* @request: request object
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
int cdns3_gadget_ep_dequeue(struct usb_ep *ep,
|
|
struct usb_request *request)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
struct usb_request *req, *req_temp;
|
|
struct cdns3_request *priv_req;
|
|
struct cdns3_trb *link_trb;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (!ep || !request || !ep->desc)
|
|
return -EINVAL;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
|
|
priv_req = to_cdns3_request(request);
|
|
|
|
trace_cdns3_ep_dequeue(priv_req);
|
|
|
|
cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
|
|
|
|
list_for_each_entry_safe(req, req_temp, &priv_ep->pending_req_list,
|
|
list) {
|
|
if (request == req)
|
|
goto found;
|
|
}
|
|
|
|
list_for_each_entry_safe(req, req_temp, &priv_ep->deferred_req_list,
|
|
list) {
|
|
if (request == req)
|
|
goto found;
|
|
}
|
|
|
|
goto not_found;
|
|
|
|
found:
|
|
|
|
if (priv_ep->wa1_trb == priv_req->trb)
|
|
cdns3_wa1_restore_cycle_bit(priv_ep);
|
|
|
|
link_trb = priv_req->trb;
|
|
cdns3_move_deq_to_next_trb(priv_req);
|
|
cdns3_gadget_giveback(priv_ep, priv_req, -ECONNRESET);
|
|
|
|
/* Update ring */
|
|
request = cdns3_next_request(&priv_ep->deferred_req_list);
|
|
if (request) {
|
|
priv_req = to_cdns3_request(request);
|
|
|
|
link_trb->buffer = TRB_BUFFER(priv_ep->trb_pool_dma +
|
|
(priv_req->start_trb * TRB_SIZE));
|
|
link_trb->control = (link_trb->control & TRB_CYCLE) |
|
|
TRB_TYPE(TRB_LINK) | TRB_CHAIN | TRB_TOGGLE;
|
|
} else {
|
|
priv_ep->flags |= EP_UPDATE_EP_TRBADDR;
|
|
}
|
|
|
|
not_found:
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* __cdns3_gadget_ep_set_halt Sets stall on selected endpoint
|
|
* Should be called after acquiring spin_lock and selecting ep
|
|
* @ep: endpoint object to set stall on.
|
|
*/
|
|
void __cdns3_gadget_ep_set_halt(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
|
|
trace_cdns3_halt(priv_ep, 1, 0);
|
|
|
|
if (!(priv_ep->flags & EP_STALLED)) {
|
|
u32 ep_sts_reg = readl(&priv_dev->regs->ep_sts);
|
|
|
|
if (!(ep_sts_reg & EP_STS_DBUSY))
|
|
cdns3_ep_stall_flush(priv_ep);
|
|
else
|
|
priv_ep->flags |= EP_STALL_PENDING;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* __cdns3_gadget_ep_clear_halt Clears stall on selected endpoint
|
|
* Should be called after acquiring spin_lock and selecting ep
|
|
* @ep: endpoint object to clear stall on
|
|
*/
|
|
int __cdns3_gadget_ep_clear_halt(struct cdns3_endpoint *priv_ep)
|
|
{
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
struct usb_request *request;
|
|
int ret = 0;
|
|
int val;
|
|
|
|
trace_cdns3_halt(priv_ep, 0, 0);
|
|
|
|
writel(EP_CMD_CSTALL | EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
|
|
|
|
/* wait for EPRST cleared */
|
|
readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
|
|
!(val & EP_CMD_EPRST), 100);
|
|
if (ret)
|
|
return -EINVAL;
|
|
|
|
priv_ep->flags &= ~(EP_STALLED | EP_STALL_PENDING);
|
|
|
|
request = cdns3_next_request(&priv_ep->pending_req_list);
|
|
|
|
if (request)
|
|
cdns3_rearm_transfer(priv_ep, 1);
|
|
|
|
cdns3_start_all_request(priv_dev, priv_ep);
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_ep_set_halt Sets/clears stall on selected endpoint
|
|
* @ep: endpoint object to set/clear stall on
|
|
* @value: 1 for set stall, 0 for clear stall
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
int cdns3_gadget_ep_set_halt(struct usb_ep *ep, int value)
|
|
{
|
|
struct cdns3_endpoint *priv_ep = ep_to_cdns3_ep(ep);
|
|
struct cdns3_device *priv_dev = priv_ep->cdns3_dev;
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
if (!(priv_ep->flags & EP_ENABLED))
|
|
return -EPERM;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
|
|
cdns3_select_ep(priv_dev, ep->desc->bEndpointAddress);
|
|
|
|
if (!value) {
|
|
priv_ep->flags &= ~EP_WEDGE;
|
|
ret = __cdns3_gadget_ep_clear_halt(priv_ep);
|
|
} else {
|
|
__cdns3_gadget_ep_set_halt(priv_ep);
|
|
}
|
|
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
|
|
return ret;
|
|
}
|
|
|
|
extern const struct usb_ep_ops cdns3_gadget_ep0_ops;
|
|
|
|
static const struct usb_ep_ops cdns3_gadget_ep_ops = {
|
|
.enable = cdns3_gadget_ep_enable,
|
|
.disable = cdns3_gadget_ep_disable,
|
|
.alloc_request = cdns3_gadget_ep_alloc_request,
|
|
.free_request = cdns3_gadget_ep_free_request,
|
|
.queue = cdns3_gadget_ep_queue,
|
|
.dequeue = cdns3_gadget_ep_dequeue,
|
|
.set_halt = cdns3_gadget_ep_set_halt,
|
|
.set_wedge = cdns3_gadget_ep_set_wedge,
|
|
};
|
|
|
|
/**
|
|
* cdns3_gadget_get_frame Returns number of actual ITP frame
|
|
* @gadget: gadget object
|
|
*
|
|
* Returns number of actual ITP frame
|
|
*/
|
|
static int cdns3_gadget_get_frame(struct usb_gadget *gadget)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
|
|
return readl(&priv_dev->regs->usb_itpn);
|
|
}
|
|
|
|
int __cdns3_gadget_wakeup(struct cdns3_device *priv_dev)
|
|
{
|
|
enum usb_device_speed speed;
|
|
|
|
speed = cdns3_get_speed(priv_dev);
|
|
|
|
if (speed >= USB_SPEED_SUPER)
|
|
return 0;
|
|
|
|
/* Start driving resume signaling to indicate remote wakeup. */
|
|
writel(USB_CONF_LGO_L0, &priv_dev->regs->usb_conf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns3_gadget_wakeup(struct usb_gadget *gadget)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
unsigned long flags;
|
|
int ret = 0;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
ret = __cdns3_gadget_wakeup(priv_dev);
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
return ret;
|
|
}
|
|
|
|
static int cdns3_gadget_set_selfpowered(struct usb_gadget *gadget,
|
|
int is_selfpowered)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
priv_dev->is_selfpowered = !!is_selfpowered;
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
static int cdns3_gadget_pullup(struct usb_gadget *gadget, int is_on)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
|
|
if (is_on)
|
|
writel(USB_CONF_DEVEN, &priv_dev->regs->usb_conf);
|
|
else
|
|
writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cdns3_gadget_config(struct cdns3_device *priv_dev)
|
|
{
|
|
struct cdns3_usb_regs __iomem *regs = priv_dev->regs;
|
|
u32 reg;
|
|
|
|
cdns3_ep0_config(priv_dev);
|
|
|
|
/* enable interrupts for endpoint 0 (in and out) */
|
|
writel(EP_IEN_EP_OUT0 | EP_IEN_EP_IN0, ®s->ep_ien);
|
|
|
|
/*
|
|
* Driver needs to modify LFPS minimal U1 Exit time for DEV_VER_TI_V1
|
|
* revision of controller.
|
|
*/
|
|
if (priv_dev->dev_ver == DEV_VER_TI_V1) {
|
|
reg = readl(®s->dbg_link1);
|
|
|
|
reg &= ~DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_MASK;
|
|
reg |= DBG_LINK1_LFPS_MIN_GEN_U1_EXIT(0x55) |
|
|
DBG_LINK1_LFPS_MIN_GEN_U1_EXIT_SET;
|
|
writel(reg, ®s->dbg_link1);
|
|
}
|
|
|
|
/*
|
|
* By default some platforms has set protected access to memory.
|
|
* This cause problem with cache, so driver restore non-secure
|
|
* access to memory.
|
|
*/
|
|
reg = readl(®s->dma_axi_ctrl);
|
|
reg |= DMA_AXI_CTRL_MARPROT(DMA_AXI_CTRL_NON_SECURE) |
|
|
DMA_AXI_CTRL_MAWPROT(DMA_AXI_CTRL_NON_SECURE);
|
|
writel(reg, ®s->dma_axi_ctrl);
|
|
|
|
/* enable generic interrupt*/
|
|
writel(USB_IEN_INIT, ®s->usb_ien);
|
|
writel(USB_CONF_CLK2OFFDS | USB_CONF_L1DS, ®s->usb_conf);
|
|
|
|
cdns3_configure_dmult(priv_dev, NULL);
|
|
|
|
cdns3_gadget_pullup(&priv_dev->gadget, 1);
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_udc_start Gadget start
|
|
* @gadget: gadget object
|
|
* @driver: driver which operates on this gadget
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
static int cdns3_gadget_udc_start(struct usb_gadget *gadget,
|
|
struct usb_gadget_driver *driver)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&priv_dev->lock, flags);
|
|
priv_dev->gadget_driver = driver;
|
|
cdns3_gadget_config(priv_dev);
|
|
spin_unlock_irqrestore(&priv_dev->lock, flags);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_udc_stop Stops gadget
|
|
* @gadget: gadget object
|
|
*
|
|
* Returns 0
|
|
*/
|
|
static int cdns3_gadget_udc_stop(struct usb_gadget *gadget)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
struct cdns3_endpoint *priv_ep;
|
|
u32 bEndpointAddress;
|
|
struct usb_ep *ep;
|
|
int ret = 0;
|
|
int val;
|
|
|
|
priv_dev->gadget_driver = NULL;
|
|
|
|
priv_dev->onchip_used_size = 0;
|
|
priv_dev->out_mem_is_allocated = 0;
|
|
priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
|
|
list_for_each_entry(ep, &priv_dev->gadget.ep_list, ep_list) {
|
|
priv_ep = ep_to_cdns3_ep(ep);
|
|
bEndpointAddress = priv_ep->num | priv_ep->dir;
|
|
cdns3_select_ep(priv_dev, bEndpointAddress);
|
|
writel(EP_CMD_EPRST, &priv_dev->regs->ep_cmd);
|
|
readl_poll_timeout_atomic(&priv_dev->regs->ep_cmd, val,
|
|
!(val & EP_CMD_EPRST), 100);
|
|
}
|
|
|
|
/* disable interrupt for device */
|
|
writel(0, &priv_dev->regs->usb_ien);
|
|
writel(USB_CONF_DEVDS, &priv_dev->regs->usb_conf);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void cdns3_gadget_udc_set_speed(struct usb_gadget *gadget,
|
|
enum usb_device_speed speed)
|
|
{
|
|
struct cdns3_device *priv_dev = gadget_to_cdns3_device(gadget);
|
|
|
|
switch (speed) {
|
|
case USB_SPEED_FULL:
|
|
writel(USB_CONF_SFORCE_FS, &priv_dev->regs->usb_conf);
|
|
writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
|
|
break;
|
|
case USB_SPEED_HIGH:
|
|
writel(USB_CONF_USB3DIS, &priv_dev->regs->usb_conf);
|
|
break;
|
|
case USB_SPEED_SUPER:
|
|
break;
|
|
default:
|
|
dev_err(priv_dev->dev, "invalid speed parameter %d\n", speed);
|
|
}
|
|
|
|
priv_dev->gadget.speed = speed;
|
|
}
|
|
|
|
static const struct usb_gadget_ops cdns3_gadget_ops = {
|
|
.get_frame = cdns3_gadget_get_frame,
|
|
.wakeup = cdns3_gadget_wakeup,
|
|
.set_selfpowered = cdns3_gadget_set_selfpowered,
|
|
.pullup = cdns3_gadget_pullup,
|
|
.udc_start = cdns3_gadget_udc_start,
|
|
.udc_stop = cdns3_gadget_udc_stop,
|
|
.match_ep = cdns3_gadget_match_ep,
|
|
.udc_set_speed = cdns3_gadget_udc_set_speed,
|
|
};
|
|
|
|
static void cdns3_free_all_eps(struct cdns3_device *priv_dev)
|
|
{
|
|
int i;
|
|
|
|
/* ep0 OUT point to ep0 IN. */
|
|
priv_dev->eps[16] = NULL;
|
|
|
|
for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++)
|
|
if (priv_dev->eps[i]) {
|
|
cdns3_free_trb_pool(priv_dev->eps[i]);
|
|
devm_kfree(priv_dev->dev, priv_dev->eps[i]);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* cdns3_init_eps Initializes software endpoints of gadget
|
|
* @cdns3: extended gadget object
|
|
*
|
|
* Returns 0 on success, error code elsewhere
|
|
*/
|
|
static int cdns3_init_eps(struct cdns3_device *priv_dev)
|
|
{
|
|
u32 ep_enabled_reg, iso_ep_reg;
|
|
struct cdns3_endpoint *priv_ep;
|
|
int ep_dir, ep_number;
|
|
u32 ep_mask;
|
|
int ret = 0;
|
|
int i;
|
|
|
|
/* Read it from USB_CAP3 to USB_CAP5 */
|
|
ep_enabled_reg = readl(&priv_dev->regs->usb_cap3);
|
|
iso_ep_reg = readl(&priv_dev->regs->usb_cap4);
|
|
|
|
dev_dbg(priv_dev->dev, "Initializing non-zero endpoints\n");
|
|
|
|
for (i = 0; i < CDNS3_ENDPOINTS_MAX_COUNT; i++) {
|
|
ep_dir = i >> 4; /* i div 16 */
|
|
ep_number = i & 0xF; /* i % 16 */
|
|
ep_mask = BIT(i);
|
|
|
|
if (!(ep_enabled_reg & ep_mask))
|
|
continue;
|
|
|
|
if (ep_dir && !ep_number) {
|
|
priv_dev->eps[i] = priv_dev->eps[0];
|
|
continue;
|
|
}
|
|
|
|
priv_ep = devm_kzalloc(priv_dev->dev, sizeof(*priv_ep),
|
|
GFP_KERNEL);
|
|
if (!priv_ep) {
|
|
ret = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
/* set parent of endpoint object */
|
|
priv_ep->cdns3_dev = priv_dev;
|
|
priv_dev->eps[i] = priv_ep;
|
|
priv_ep->num = ep_number;
|
|
priv_ep->dir = ep_dir ? USB_DIR_IN : USB_DIR_OUT;
|
|
|
|
if (!ep_number) {
|
|
ret = cdns3_init_ep0(priv_dev, priv_ep);
|
|
if (ret) {
|
|
dev_err(priv_dev->dev, "Failed to init ep0\n");
|
|
goto err;
|
|
}
|
|
} else {
|
|
snprintf(priv_ep->name, sizeof(priv_ep->name), "ep%d%s",
|
|
ep_number, !!ep_dir ? "in" : "out");
|
|
priv_ep->endpoint.name = priv_ep->name;
|
|
|
|
usb_ep_set_maxpacket_limit(&priv_ep->endpoint,
|
|
CDNS3_EP_MAX_PACKET_LIMIT);
|
|
priv_ep->endpoint.max_streams = CDNS3_EP_MAX_STREAMS;
|
|
priv_ep->endpoint.ops = &cdns3_gadget_ep_ops;
|
|
if (ep_dir)
|
|
priv_ep->endpoint.caps.dir_in = 1;
|
|
else
|
|
priv_ep->endpoint.caps.dir_out = 1;
|
|
|
|
if (iso_ep_reg & ep_mask)
|
|
priv_ep->endpoint.caps.type_iso = 1;
|
|
|
|
priv_ep->endpoint.caps.type_bulk = 1;
|
|
priv_ep->endpoint.caps.type_int = 1;
|
|
|
|
list_add_tail(&priv_ep->endpoint.ep_list,
|
|
&priv_dev->gadget.ep_list);
|
|
}
|
|
|
|
priv_ep->flags = 0;
|
|
|
|
dev_info(priv_dev->dev, "Initialized %s support: %s %s\n",
|
|
priv_ep->name,
|
|
priv_ep->endpoint.caps.type_bulk ? "BULK, INT" : "",
|
|
priv_ep->endpoint.caps.type_iso ? "ISO" : "");
|
|
|
|
INIT_LIST_HEAD(&priv_ep->pending_req_list);
|
|
INIT_LIST_HEAD(&priv_ep->deferred_req_list);
|
|
INIT_LIST_HEAD(&priv_ep->wa2_descmiss_req_list);
|
|
}
|
|
|
|
return 0;
|
|
err:
|
|
cdns3_free_all_eps(priv_dev);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
void cdns3_gadget_exit(struct cdns3 *cdns)
|
|
{
|
|
struct cdns3_device *priv_dev;
|
|
|
|
priv_dev = cdns->gadget_dev;
|
|
|
|
usb_del_gadget_udc(&priv_dev->gadget);
|
|
|
|
cdns3_free_all_eps(priv_dev);
|
|
|
|
while (!list_empty(&priv_dev->aligned_buf_list)) {
|
|
struct cdns3_aligned_buf *buf;
|
|
|
|
buf = cdns3_next_align_buf(&priv_dev->aligned_buf_list);
|
|
dma_free_coherent(buf->buf);
|
|
|
|
list_del(&buf->list);
|
|
kfree(buf);
|
|
}
|
|
|
|
dma_free_coherent(priv_dev->setup_buf);
|
|
|
|
kfree(priv_dev->zlp_buf);
|
|
kfree(priv_dev);
|
|
cdns->gadget_dev = NULL;
|
|
cdns3_drd_switch_gadget(cdns, 0);
|
|
}
|
|
|
|
static int cdns3_gadget_start(struct cdns3 *cdns)
|
|
{
|
|
struct cdns3_device *priv_dev;
|
|
u32 max_speed;
|
|
int ret;
|
|
|
|
priv_dev = kzalloc(sizeof(*priv_dev), GFP_KERNEL);
|
|
if (!priv_dev)
|
|
return -ENOMEM;
|
|
|
|
cdns->gadget_dev = priv_dev;
|
|
priv_dev->sysdev = cdns->dev;
|
|
priv_dev->dev = cdns->dev;
|
|
priv_dev->regs = cdns->dev_regs;
|
|
|
|
dev_read_u32(priv_dev->dev, "cdns,on-chip-buff-size",
|
|
&priv_dev->onchip_buffers);
|
|
|
|
if (priv_dev->onchip_buffers <= 0) {
|
|
u32 reg = readl(&priv_dev->regs->usb_cap2);
|
|
|
|
priv_dev->onchip_buffers = USB_CAP2_ACTUAL_MEM_SIZE(reg);
|
|
}
|
|
|
|
if (!priv_dev->onchip_buffers)
|
|
priv_dev->onchip_buffers = 256;
|
|
|
|
max_speed = usb_get_maximum_speed(dev_ofnode(cdns->dev));
|
|
|
|
/* Check the maximum_speed parameter */
|
|
switch (max_speed) {
|
|
case USB_SPEED_FULL:
|
|
/* fall through */
|
|
case USB_SPEED_HIGH:
|
|
/* fall through */
|
|
case USB_SPEED_SUPER:
|
|
break;
|
|
default:
|
|
dev_err(cdns->dev, "invalid maximum_speed parameter %d\n",
|
|
max_speed);
|
|
/* fall through */
|
|
case USB_SPEED_UNKNOWN:
|
|
/* default to superspeed */
|
|
max_speed = USB_SPEED_SUPER;
|
|
break;
|
|
}
|
|
|
|
/* fill gadget fields */
|
|
priv_dev->gadget.max_speed = max_speed;
|
|
priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
priv_dev->gadget.ops = &cdns3_gadget_ops;
|
|
priv_dev->gadget.name = "cdns3-gadget";
|
|
#ifndef __UBOOT__
|
|
priv_dev->gadget.name = "usb-ss-gadget";
|
|
priv_dev->gadget.sg_supported = 1;
|
|
priv_dev->gadget.quirk_avoids_skb_reserve = 1;
|
|
#endif
|
|
|
|
spin_lock_init(&priv_dev->lock);
|
|
INIT_WORK(&priv_dev->pending_status_wq,
|
|
cdns3_pending_setup_status_handler);
|
|
|
|
/* initialize endpoint container */
|
|
INIT_LIST_HEAD(&priv_dev->gadget.ep_list);
|
|
INIT_LIST_HEAD(&priv_dev->aligned_buf_list);
|
|
|
|
ret = cdns3_init_eps(priv_dev);
|
|
if (ret) {
|
|
dev_err(priv_dev->dev, "Failed to create endpoints\n");
|
|
goto err1;
|
|
}
|
|
|
|
/* allocate memory for setup packet buffer */
|
|
priv_dev->setup_buf =
|
|
dma_alloc_coherent(8, (unsigned long *)&priv_dev->setup_dma);
|
|
if (!priv_dev->setup_buf) {
|
|
ret = -ENOMEM;
|
|
goto err2;
|
|
}
|
|
|
|
priv_dev->dev_ver = readl(&priv_dev->regs->usb_cap6);
|
|
|
|
dev_dbg(priv_dev->dev, "Device Controller version: %08x\n",
|
|
readl(&priv_dev->regs->usb_cap6));
|
|
dev_dbg(priv_dev->dev, "USB Capabilities:: %08x\n",
|
|
readl(&priv_dev->regs->usb_cap1));
|
|
dev_dbg(priv_dev->dev, "On-Chip memory cnfiguration: %08x\n",
|
|
readl(&priv_dev->regs->usb_cap2));
|
|
|
|
priv_dev->dev_ver = GET_DEV_BASE_VERSION(priv_dev->dev_ver);
|
|
|
|
priv_dev->zlp_buf = kzalloc(CDNS3_EP_ZLP_BUF_SIZE, GFP_KERNEL);
|
|
if (!priv_dev->zlp_buf) {
|
|
ret = -ENOMEM;
|
|
goto err3;
|
|
}
|
|
|
|
/* add USB gadget device */
|
|
ret = usb_add_gadget_udc((struct device *)priv_dev->dev,
|
|
&priv_dev->gadget);
|
|
if (ret < 0) {
|
|
dev_err(priv_dev->dev,
|
|
"Failed to register USB device controller\n");
|
|
goto err4;
|
|
}
|
|
|
|
return 0;
|
|
err4:
|
|
kfree(priv_dev->zlp_buf);
|
|
err3:
|
|
dma_free_coherent(priv_dev->setup_buf);
|
|
err2:
|
|
cdns3_free_all_eps(priv_dev);
|
|
err1:
|
|
cdns->gadget_dev = NULL;
|
|
return ret;
|
|
}
|
|
|
|
static int __cdns3_gadget_init(struct cdns3 *cdns)
|
|
{
|
|
int ret = 0;
|
|
|
|
cdns3_drd_switch_gadget(cdns, 1);
|
|
|
|
ret = cdns3_gadget_start(cdns);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns3_gadget_suspend(struct cdns3 *cdns, bool do_wakeup)
|
|
{
|
|
struct cdns3_device *priv_dev = cdns->gadget_dev;
|
|
|
|
cdns3_disconnect_gadget(priv_dev);
|
|
|
|
priv_dev->gadget.speed = USB_SPEED_UNKNOWN;
|
|
usb_gadget_set_state(&priv_dev->gadget, USB_STATE_NOTATTACHED);
|
|
cdns3_hw_reset_eps_config(priv_dev);
|
|
|
|
/* disable interrupt for device */
|
|
writel(0, &priv_dev->regs->usb_ien);
|
|
|
|
cdns3_gadget_pullup(&priv_dev->gadget, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int cdns3_gadget_resume(struct cdns3 *cdns, bool hibernated)
|
|
{
|
|
struct cdns3_device *priv_dev = cdns->gadget_dev;
|
|
|
|
if (!priv_dev->gadget_driver)
|
|
return 0;
|
|
|
|
cdns3_gadget_config(priv_dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_init - initialize device structure
|
|
*
|
|
* cdns: cdns3 instance
|
|
*
|
|
* This function initializes the gadget.
|
|
*/
|
|
int cdns3_gadget_init(struct cdns3 *cdns)
|
|
{
|
|
struct cdns3_role_driver *rdrv;
|
|
|
|
rdrv = devm_kzalloc(cdns->dev, sizeof(*rdrv), GFP_KERNEL);
|
|
if (!rdrv)
|
|
return -ENOMEM;
|
|
|
|
rdrv->start = __cdns3_gadget_init;
|
|
rdrv->stop = cdns3_gadget_exit;
|
|
rdrv->suspend = cdns3_gadget_suspend;
|
|
rdrv->resume = cdns3_gadget_resume;
|
|
rdrv->state = CDNS3_ROLE_STATE_INACTIVE;
|
|
rdrv->name = "gadget";
|
|
cdns->roles[USB_ROLE_DEVICE] = rdrv;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* cdns3_gadget_uboot_handle_interrupt - handle cdns3 gadget interrupt
|
|
* @cdns: pointer to struct cdns3
|
|
*
|
|
* Handles ep0 and gadget interrupt
|
|
*/
|
|
static void cdns3_gadget_uboot_handle_interrupt(struct cdns3 *cdns)
|
|
{
|
|
int ret = cdns3_device_irq_handler(0, cdns);
|
|
|
|
if (ret == IRQ_WAKE_THREAD)
|
|
cdns3_device_thread_irq_handler(0, cdns);
|
|
}
|
|
|
|
int dm_usb_gadget_handle_interrupts(struct udevice *dev)
|
|
{
|
|
struct cdns3 *cdns = dev_get_priv(dev);
|
|
|
|
cdns3_gadget_uboot_handle_interrupt(cdns);
|
|
|
|
return 0;
|
|
}
|