mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-01 08:59:33 +00:00
84ad688473
Signed-off-by: Peter Tyser <ptyser@xes-inc.com>
248 lines
8.5 KiB
C
248 lines
8.5 KiB
C
/*
|
|
*
|
|
* @par
|
|
* IXP400 SW Release version 2.0
|
|
*
|
|
* -- Copyright Notice --
|
|
*
|
|
* @par
|
|
* Copyright 2001-2005, Intel Corporation.
|
|
* All rights reserved.
|
|
*
|
|
* @par
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the Intel Corporation nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* @par
|
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS ``AS IS''
|
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* @par
|
|
* -- End of Copyright Notice --
|
|
*/
|
|
|
|
|
|
#ifndef IxEthAccMac_p_H
|
|
#define IxEthAccMac_p_H
|
|
|
|
#include "IxOsal.h"
|
|
|
|
#define IX_ETH_ACC_MAX_MULTICAST_ADDRESSES 256
|
|
#define IX_ETH_ACC_NUM_PORTS 3
|
|
#define IX_ETH_ACC_MAX_FRAME_SIZE_DEFAULT 1536
|
|
#define IX_ETH_ACC_MAX_FRAME_SIZE_UPPER_RANGE (65536-64)
|
|
#define IX_ETH_ACC_MAX_FRAME_SIZE_LOWER_RANGE 64
|
|
|
|
/*
|
|
*
|
|
* MAC register definitions
|
|
*
|
|
*/
|
|
#define IX_ETH_ACC_MAC_0_BASE IX_OSAL_IXP400_ETHA_PHYS_BASE
|
|
#define IX_ETH_ACC_MAC_1_BASE IX_OSAL_IXP400_ETHB_PHYS_BASE
|
|
#define IX_ETH_ACC_MAC_2_BASE IX_OSAL_IXP400_ETH_NPEA_PHYS_BASE
|
|
|
|
#define IX_ETH_ACC_MAC_TX_CNTRL1 0x000
|
|
#define IX_ETH_ACC_MAC_TX_CNTRL2 0x004
|
|
#define IX_ETH_ACC_MAC_RX_CNTRL1 0x010
|
|
#define IX_ETH_ACC_MAC_RX_CNTRL2 0x014
|
|
#define IX_ETH_ACC_MAC_RANDOM_SEED 0x020
|
|
#define IX_ETH_ACC_MAC_THRESH_P_EMPTY 0x030
|
|
#define IX_ETH_ACC_MAC_THRESH_P_FULL 0x038
|
|
#define IX_ETH_ACC_MAC_BUF_SIZE_TX 0x040
|
|
#define IX_ETH_ACC_MAC_TX_DEFER 0x050
|
|
#define IX_ETH_ACC_MAC_RX_DEFER 0x054
|
|
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1 0x060
|
|
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2 0x064
|
|
#define IX_ETH_ACC_MAC_SLOT_TIME 0x070
|
|
#define IX_ETH_ACC_MAC_MDIO_CMD_1 0x080
|
|
#define IX_ETH_ACC_MAC_MDIO_CMD_2 0x084
|
|
#define IX_ETH_ACC_MAC_MDIO_CMD_3 0x088
|
|
#define IX_ETH_ACC_MAC_MDIO_CMD_4 0x08c
|
|
#define IX_ETH_ACC_MAC_MDIO_STS_1 0x090
|
|
#define IX_ETH_ACC_MAC_MDIO_STS_2 0x094
|
|
#define IX_ETH_ACC_MAC_MDIO_STS_3 0x098
|
|
#define IX_ETH_ACC_MAC_MDIO_STS_4 0x09c
|
|
#define IX_ETH_ACC_MAC_ADDR_MASK_1 0x0A0
|
|
#define IX_ETH_ACC_MAC_ADDR_MASK_2 0x0A4
|
|
#define IX_ETH_ACC_MAC_ADDR_MASK_3 0x0A8
|
|
#define IX_ETH_ACC_MAC_ADDR_MASK_4 0x0AC
|
|
#define IX_ETH_ACC_MAC_ADDR_MASK_5 0x0B0
|
|
#define IX_ETH_ACC_MAC_ADDR_MASK_6 0x0B4
|
|
#define IX_ETH_ACC_MAC_ADDR_1 0x0C0
|
|
#define IX_ETH_ACC_MAC_ADDR_2 0x0C4
|
|
#define IX_ETH_ACC_MAC_ADDR_3 0x0C8
|
|
#define IX_ETH_ACC_MAC_ADDR_4 0x0CC
|
|
#define IX_ETH_ACC_MAC_ADDR_5 0x0D0
|
|
#define IX_ETH_ACC_MAC_ADDR_6 0x0D4
|
|
#define IX_ETH_ACC_MAC_INT_CLK_THRESH 0x0E0
|
|
#define IX_ETH_ACC_MAC_UNI_ADDR_1 0x0F0
|
|
#define IX_ETH_ACC_MAC_UNI_ADDR_2 0x0F4
|
|
#define IX_ETH_ACC_MAC_UNI_ADDR_3 0x0F8
|
|
#define IX_ETH_ACC_MAC_UNI_ADDR_4 0x0FC
|
|
#define IX_ETH_ACC_MAC_UNI_ADDR_5 0x100
|
|
#define IX_ETH_ACC_MAC_UNI_ADDR_6 0x104
|
|
#define IX_ETH_ACC_MAC_CORE_CNTRL 0x1FC
|
|
|
|
|
|
/*
|
|
*
|
|
*Bit definitions
|
|
*
|
|
*/
|
|
|
|
/* TX Control Register 1*/
|
|
|
|
#define IX_ETH_ACC_TX_CNTRL1_TX_EN BIT(0)
|
|
#define IX_ETH_ACC_TX_CNTRL1_DUPLEX BIT(1)
|
|
#define IX_ETH_ACC_TX_CNTRL1_RETRY BIT(2)
|
|
#define IX_ETH_ACC_TX_CNTRL1_PAD_EN BIT(3)
|
|
#define IX_ETH_ACC_TX_CNTRL1_FCS_EN BIT(4)
|
|
#define IX_ETH_ACC_TX_CNTRL1_2DEFER BIT(5)
|
|
#define IX_ETH_ACC_TX_CNTRL1_RMII BIT(6)
|
|
|
|
/* TX Control Register 2 */
|
|
#define IX_ETH_ACC_TX_CNTRL2_RETRIES_MASK 0xf
|
|
|
|
/* RX Control Register 1 */
|
|
#define IX_ETH_ACC_RX_CNTRL1_RX_EN BIT(0)
|
|
#define IX_ETH_ACC_RX_CNTRL1_PADSTRIP_EN BIT(1)
|
|
#define IX_ETH_ACC_RX_CNTRL1_CRC_EN BIT(2)
|
|
#define IX_ETH_ACC_RX_CNTRL1_PAUSE_EN BIT(3)
|
|
#define IX_ETH_ACC_RX_CNTRL1_LOOP_EN BIT(4)
|
|
#define IX_ETH_ACC_RX_CNTRL1_ADDR_FLTR_EN BIT(5)
|
|
#define IX_ETH_ACC_RX_CNTRL1_RX_RUNT_EN BIT(6)
|
|
#define IX_ETH_ACC_RX_CNTRL1_BCAST_DIS BIT(7)
|
|
|
|
/* RX Control Register 2 */
|
|
#define IX_ETH_ACC_RX_CNTRL2_DEFER_EN BIT(0)
|
|
|
|
|
|
|
|
/* Core Control Register */
|
|
#define IX_ETH_ACC_CORE_RESET BIT(0)
|
|
#define IX_ETH_ACC_CORE_RX_FIFO_FLUSH BIT(1)
|
|
#define IX_ETH_ACC_CORE_TX_FIFO_FLUSH BIT(2)
|
|
#define IX_ETH_ACC_CORE_SEND_JAM BIT(3)
|
|
#define IX_ETH_ACC_CORE_MDC_EN BIT(4)
|
|
|
|
/* 1st bit of 1st MAC octet */
|
|
#define IX_ETH_ACC_ETH_MAC_BCAST_MCAST_BIT ( 1)
|
|
|
|
|
|
/*
|
|
*
|
|
* Default values
|
|
*
|
|
*/
|
|
|
|
|
|
#define IX_ETH_ACC_TX_CNTRL1_DEFAULT (IX_ETH_ACC_TX_CNTRL1_TX_EN | \
|
|
IX_ETH_ACC_TX_CNTRL1_RETRY | \
|
|
IX_ETH_ACC_TX_CNTRL1_FCS_EN | \
|
|
IX_ETH_ACC_TX_CNTRL1_2DEFER | \
|
|
IX_ETH_ACC_TX_CNTRL1_PAD_EN)
|
|
|
|
#define IX_ETH_ACC_TX_MAX_RETRIES_DEFAULT 0x0f
|
|
|
|
#define IX_ETH_ACC_RX_CNTRL1_DEFAULT (IX_ETH_ACC_RX_CNTRL1_CRC_EN \
|
|
| IX_ETH_ACC_RX_CNTRL1_RX_EN)
|
|
|
|
#define IX_ETH_ACC_RX_CNTRL2_DEFAULT 0x0
|
|
|
|
/* Thresholds determined by NPE firmware FS */
|
|
#define IX_ETH_ACC_MAC_THRESH_P_EMPTY_DEFAULT 0x12
|
|
#define IX_ETH_ACC_MAC_THRESH_P_FULL_DEFAULT 0x30
|
|
|
|
/* Number of bytes that must be in the tx fifo before
|
|
transmission commences*/
|
|
#define IX_ETH_ACC_MAC_BUF_SIZE_TX_DEFAULT 0x8
|
|
|
|
/* One-part deferral values */
|
|
#define IX_ETH_ACC_MAC_TX_DEFER_DEFAULT 0x15
|
|
#define IX_ETH_ACC_MAC_RX_DEFER_DEFAULT 0x16
|
|
|
|
/* Two-part deferral values... */
|
|
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_1_DEFAULT 0x08
|
|
#define IX_ETH_ACC_MAC_TX_TWO_DEFER_2_DEFAULT 0x07
|
|
|
|
/* This value applies to MII */
|
|
#define IX_ETH_ACC_MAC_SLOT_TIME_DEFAULT 0x80
|
|
|
|
/* This value applies to RMII */
|
|
#define IX_ETH_ACC_MAC_SLOT_TIME_RMII_DEFAULT 0xFF
|
|
|
|
#define IX_ETH_ACC_MAC_ADDR_MASK_DEFAULT 0xFF
|
|
|
|
#define IX_ETH_ACC_MAC_INT_CLK_THRESH_DEFAULT 0x1
|
|
/*The following is a value chosen at random*/
|
|
#define IX_ETH_ACC_RANDOM_SEED_DEFAULT 0x8
|
|
|
|
/*By default we must configure the MAC to generate the
|
|
MDC clock*/
|
|
#define IX_ETH_ACC_CORE_DEFAULT (IX_ETH_ACC_CORE_MDC_EN)
|
|
|
|
#define IXP425_ETH_ACC_MAX_PHY 2
|
|
#define IXP425_ETH_ACC_MAX_AN_ENTRIES 20
|
|
#define IX_ETH_ACC_MAC_RESET_DELAY 1
|
|
|
|
#define IX_ETH_ACC_MAC_ALL_BITS_SET 0xFF
|
|
|
|
#define IX_ETH_ACC_MAC_MSGID_SHL 24
|
|
|
|
#define IX_ETH_ACC_PORT_DISABLE_DELAY_MSECS 20
|
|
#define IX_ETH_ACC_PORT_DISABLE_DELAY_COUNT 200 /* 4 seconds timeout */
|
|
#define IX_ETH_ACC_PORT_DISABLE_RETRY_COUNT 3
|
|
#define IX_ETH_ACC_MIB_STATS_DELAY_MSECS 2000 /* 2 seconds delay for ethernet stats */
|
|
|
|
/*Register access macros*/
|
|
#if (CPU == SIMSPARCSOLARIS)
|
|
extern void registerWriteStub (UINT32 base, UINT32 offset, UINT32 val);
|
|
extern UINT32 registerReadStub (UINT32 base, UINT32 offset);
|
|
|
|
#define REG_WRITE(b,o,v) registerWriteStub(b, o, v)
|
|
#define REG_READ(b,o,v) do { v = registerReadStub(b, o); } while (0)
|
|
#else
|
|
#define REG_WRITE(b,o,v) IX_OSAL_WRITE_LONG((volatile UINT32 *)(b + o), v)
|
|
#define REG_READ(b,o,v) (v = IX_OSAL_READ_LONG((volatile UINT32 *)(b + o)))
|
|
|
|
#endif
|
|
|
|
void ixEthAccMacUnload(void);
|
|
IxEthAccStatus ixEthAccMacMemInit(void);
|
|
|
|
/* MAC core loopback */
|
|
IxEthAccStatus ixEthAccPortLoopbackEnable(IxEthAccPortId portId);
|
|
IxEthAccStatus ixEthAccPortLoopbackDisable(IxEthAccPortId portId);
|
|
|
|
/* MAC core traffic control */
|
|
IxEthAccStatus ixEthAccPortTxEnablePriv(IxEthAccPortId portId);
|
|
IxEthAccStatus ixEthAccPortTxDisablePriv(IxEthAccPortId portId);
|
|
IxEthAccStatus ixEthAccPortRxEnablePriv(IxEthAccPortId portId);
|
|
IxEthAccStatus ixEthAccPortRxDisablePriv(IxEthAccPortId portId);
|
|
IxEthAccStatus ixEthAccPortMacResetPriv(IxEthAccPortId portId);
|
|
|
|
/* NPE software loopback */
|
|
IxEthAccStatus ixEthAccNpeLoopbackDisablePriv(IxEthAccPortId portId);
|
|
IxEthAccStatus ixEthAccNpeLoopbackEnablePriv(IxEthAccPortId portId);
|
|
|
|
#endif /*IxEthAccMac_p_H*/
|
|
|