mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
1fd92db83d
Update the naming convention used in the network stack functions and variables that Ethernet drivers use to interact with it. This cleans up the temporary hacks that were added to this interface along with the DM support. This patch has a few remaining checkpatch.pl failures that would be out of the scope of this patch to fix (drivers that are in gross violation of checkpatch.pl). Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Acked-by: Simon Glass <sjg@chromium.org>
640 lines
16 KiB
C
640 lines
16 KiB
C
/*
|
|
* Cirrus Logic EP93xx ethernet MAC / MII driver.
|
|
*
|
|
* Copyright (C) 2010, 2009
|
|
* Matthias Kaehlcke <matthias@kaehlcke.net>
|
|
*
|
|
* Copyright (C) 2004, 2005
|
|
* Cory T. Tusar, Videon Central, Inc., <ctusar@videon-central.com>
|
|
*
|
|
* Based on the original eth.[ch] Cirrus Logic EP93xx Rev D. Ethernet Driver,
|
|
* which is
|
|
*
|
|
* (C) Copyright 2002 2003
|
|
* Adam Bezanson, Network Audio Technologies, Inc.
|
|
* <bezanson@netaudiotech.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <command.h>
|
|
#include <common.h>
|
|
#include <asm/arch/ep93xx.h>
|
|
#include <asm/io.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <linux/types.h>
|
|
#include "ep93xx_eth.h"
|
|
|
|
#define GET_PRIV(eth_dev) ((struct ep93xx_priv *)(eth_dev)->priv)
|
|
#define GET_REGS(eth_dev) (GET_PRIV(eth_dev)->regs)
|
|
|
|
/* ep93xx_miiphy ops forward declarations */
|
|
static int ep93xx_miiphy_read(const char * const dev, unsigned char const addr,
|
|
unsigned char const reg, unsigned short * const value);
|
|
static int ep93xx_miiphy_write(const char * const dev, unsigned char const addr,
|
|
unsigned char const reg, unsigned short const value);
|
|
|
|
#if defined(EP93XX_MAC_DEBUG)
|
|
/**
|
|
* Dump ep93xx_mac values to the terminal.
|
|
*/
|
|
static void dump_dev(struct eth_device *dev)
|
|
{
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
int i;
|
|
|
|
printf("\ndump_dev()\n");
|
|
printf(" rx_dq.base %p\n", priv->rx_dq.base);
|
|
printf(" rx_dq.current %p\n", priv->rx_dq.current);
|
|
printf(" rx_dq.end %p\n", priv->rx_dq.end);
|
|
printf(" rx_sq.base %p\n", priv->rx_sq.base);
|
|
printf(" rx_sq.current %p\n", priv->rx_sq.current);
|
|
printf(" rx_sq.end %p\n", priv->rx_sq.end);
|
|
|
|
for (i = 0; i < NUMRXDESC; i++)
|
|
printf(" rx_buffer[%2.d] %p\n", i, net_rx_packets[i]);
|
|
|
|
printf(" tx_dq.base %p\n", priv->tx_dq.base);
|
|
printf(" tx_dq.current %p\n", priv->tx_dq.current);
|
|
printf(" tx_dq.end %p\n", priv->tx_dq.end);
|
|
printf(" tx_sq.base %p\n", priv->tx_sq.base);
|
|
printf(" tx_sq.current %p\n", priv->tx_sq.current);
|
|
printf(" tx_sq.end %p\n", priv->tx_sq.end);
|
|
}
|
|
|
|
/**
|
|
* Dump all RX status queue entries to the terminal.
|
|
*/
|
|
static void dump_rx_status_queue(struct eth_device *dev)
|
|
{
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
int i;
|
|
|
|
printf("\ndump_rx_status_queue()\n");
|
|
printf(" descriptor address word1 word2\n");
|
|
for (i = 0; i < NUMRXDESC; i++) {
|
|
printf(" [ %p ] %08X %08X\n",
|
|
priv->rx_sq.base + i,
|
|
(priv->rx_sq.base + i)->word1,
|
|
(priv->rx_sq.base + i)->word2);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Dump all RX descriptor queue entries to the terminal.
|
|
*/
|
|
static void dump_rx_descriptor_queue(struct eth_device *dev)
|
|
{
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
int i;
|
|
|
|
printf("\ndump_rx_descriptor_queue()\n");
|
|
printf(" descriptor address word1 word2\n");
|
|
for (i = 0; i < NUMRXDESC; i++) {
|
|
printf(" [ %p ] %08X %08X\n",
|
|
priv->rx_dq.base + i,
|
|
(priv->rx_dq.base + i)->word1,
|
|
(priv->rx_dq.base + i)->word2);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Dump all TX descriptor queue entries to the terminal.
|
|
*/
|
|
static void dump_tx_descriptor_queue(struct eth_device *dev)
|
|
{
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
int i;
|
|
|
|
printf("\ndump_tx_descriptor_queue()\n");
|
|
printf(" descriptor address word1 word2\n");
|
|
for (i = 0; i < NUMTXDESC; i++) {
|
|
printf(" [ %p ] %08X %08X\n",
|
|
priv->tx_dq.base + i,
|
|
(priv->tx_dq.base + i)->word1,
|
|
(priv->tx_dq.base + i)->word2);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Dump all TX status queue entries to the terminal.
|
|
*/
|
|
static void dump_tx_status_queue(struct eth_device *dev)
|
|
{
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
int i;
|
|
|
|
printf("\ndump_tx_status_queue()\n");
|
|
printf(" descriptor address word1\n");
|
|
for (i = 0; i < NUMTXDESC; i++) {
|
|
printf(" [ %p ] %08X\n",
|
|
priv->rx_sq.base + i,
|
|
(priv->rx_sq.base + i)->word1);
|
|
}
|
|
}
|
|
#else
|
|
#define dump_dev(x)
|
|
#define dump_rx_descriptor_queue(x)
|
|
#define dump_rx_status_queue(x)
|
|
#define dump_tx_descriptor_queue(x)
|
|
#define dump_tx_status_queue(x)
|
|
#endif /* defined(EP93XX_MAC_DEBUG) */
|
|
|
|
/**
|
|
* Reset the EP93xx MAC by twiddling the soft reset bit and spinning until
|
|
* it's cleared.
|
|
*/
|
|
static void ep93xx_mac_reset(struct eth_device *dev)
|
|
{
|
|
struct mac_regs *mac = GET_REGS(dev);
|
|
uint32_t value;
|
|
|
|
debug("+ep93xx_mac_reset");
|
|
|
|
value = readl(&mac->selfctl);
|
|
value |= SELFCTL_RESET;
|
|
writel(value, &mac->selfctl);
|
|
|
|
while (readl(&mac->selfctl) & SELFCTL_RESET)
|
|
; /* noop */
|
|
|
|
debug("-ep93xx_mac_reset");
|
|
}
|
|
|
|
/* Eth device open */
|
|
static int ep93xx_eth_open(struct eth_device *dev, bd_t *bd)
|
|
{
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
struct mac_regs *mac = GET_REGS(dev);
|
|
uchar *mac_addr = dev->enetaddr;
|
|
int i;
|
|
|
|
debug("+ep93xx_eth_open");
|
|
|
|
/* Reset the MAC */
|
|
ep93xx_mac_reset(dev);
|
|
|
|
/* Reset the descriptor queues' current and end address values */
|
|
priv->tx_dq.current = priv->tx_dq.base;
|
|
priv->tx_dq.end = (priv->tx_dq.base + NUMTXDESC);
|
|
|
|
priv->tx_sq.current = priv->tx_sq.base;
|
|
priv->tx_sq.end = (priv->tx_sq.base + NUMTXDESC);
|
|
|
|
priv->rx_dq.current = priv->rx_dq.base;
|
|
priv->rx_dq.end = (priv->rx_dq.base + NUMRXDESC);
|
|
|
|
priv->rx_sq.current = priv->rx_sq.base;
|
|
priv->rx_sq.end = (priv->rx_sq.base + NUMRXDESC);
|
|
|
|
/*
|
|
* Set the transmit descriptor and status queues' base address,
|
|
* current address, and length registers. Set the maximum frame
|
|
* length and threshold. Enable the transmit descriptor processor.
|
|
*/
|
|
writel((uint32_t)priv->tx_dq.base, &mac->txdq.badd);
|
|
writel((uint32_t)priv->tx_dq.base, &mac->txdq.curadd);
|
|
writel(sizeof(struct tx_descriptor) * NUMTXDESC, &mac->txdq.blen);
|
|
|
|
writel((uint32_t)priv->tx_sq.base, &mac->txstsq.badd);
|
|
writel((uint32_t)priv->tx_sq.base, &mac->txstsq.curadd);
|
|
writel(sizeof(struct tx_status) * NUMTXDESC, &mac->txstsq.blen);
|
|
|
|
writel(0x00040000, &mac->txdthrshld);
|
|
writel(0x00040000, &mac->txststhrshld);
|
|
|
|
writel((TXSTARTMAX << 0) | (PKTSIZE_ALIGN << 16), &mac->maxfrmlen);
|
|
writel(BMCTL_TXEN, &mac->bmctl);
|
|
|
|
/*
|
|
* Set the receive descriptor and status queues' base address,
|
|
* current address, and length registers. Enable the receive
|
|
* descriptor processor.
|
|
*/
|
|
writel((uint32_t)priv->rx_dq.base, &mac->rxdq.badd);
|
|
writel((uint32_t)priv->rx_dq.base, &mac->rxdq.curadd);
|
|
writel(sizeof(struct rx_descriptor) * NUMRXDESC, &mac->rxdq.blen);
|
|
|
|
writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.badd);
|
|
writel((uint32_t)priv->rx_sq.base, &mac->rxstsq.curadd);
|
|
writel(sizeof(struct rx_status) * NUMRXDESC, &mac->rxstsq.blen);
|
|
|
|
writel(0x00040000, &mac->rxdthrshld);
|
|
|
|
writel(BMCTL_RXEN, &mac->bmctl);
|
|
|
|
writel(0x00040000, &mac->rxststhrshld);
|
|
|
|
/* Wait until the receive descriptor processor is active */
|
|
while (!(readl(&mac->bmsts) & BMSTS_RXACT))
|
|
; /* noop */
|
|
|
|
/*
|
|
* Initialize the RX descriptor queue. Clear the TX descriptor queue.
|
|
* Clear the RX and TX status queues. Enqueue the RX descriptor and
|
|
* status entries to the MAC.
|
|
*/
|
|
for (i = 0; i < NUMRXDESC; i++) {
|
|
/* set buffer address */
|
|
(priv->rx_dq.base + i)->word1 = (uint32_t)net_rx_packets[i];
|
|
|
|
/* set buffer length, clear buffer index and NSOF */
|
|
(priv->rx_dq.base + i)->word2 = PKTSIZE_ALIGN;
|
|
}
|
|
|
|
memset(priv->tx_dq.base, 0,
|
|
(sizeof(struct tx_descriptor) * NUMTXDESC));
|
|
memset(priv->rx_sq.base, 0,
|
|
(sizeof(struct rx_status) * NUMRXDESC));
|
|
memset(priv->tx_sq.base, 0,
|
|
(sizeof(struct tx_status) * NUMTXDESC));
|
|
|
|
writel(NUMRXDESC, &mac->rxdqenq);
|
|
writel(NUMRXDESC, &mac->rxstsqenq);
|
|
|
|
/* Set the primary MAC address */
|
|
writel(AFP_IAPRIMARY, &mac->afp);
|
|
writel(mac_addr[0] | (mac_addr[1] << 8) |
|
|
(mac_addr[2] << 16) | (mac_addr[3] << 24),
|
|
&mac->indad);
|
|
writel(mac_addr[4] | (mac_addr[5] << 8), &mac->indad_upper);
|
|
|
|
/* Turn on RX and TX */
|
|
writel(RXCTL_IA0 | RXCTL_BA | RXCTL_SRXON |
|
|
RXCTL_RCRCA | RXCTL_MA, &mac->rxctl);
|
|
writel(TXCTL_STXON, &mac->txctl);
|
|
|
|
/* Dump data structures if we're debugging */
|
|
dump_dev(dev);
|
|
dump_rx_descriptor_queue(dev);
|
|
dump_rx_status_queue(dev);
|
|
dump_tx_descriptor_queue(dev);
|
|
dump_tx_status_queue(dev);
|
|
|
|
debug("-ep93xx_eth_open");
|
|
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* Halt EP93xx MAC transmit and receive by clearing the TxCTL and RxCTL
|
|
* registers.
|
|
*/
|
|
static void ep93xx_eth_close(struct eth_device *dev)
|
|
{
|
|
struct mac_regs *mac = GET_REGS(dev);
|
|
|
|
debug("+ep93xx_eth_close");
|
|
|
|
writel(0x00000000, &mac->rxctl);
|
|
writel(0x00000000, &mac->txctl);
|
|
|
|
debug("-ep93xx_eth_close");
|
|
}
|
|
|
|
/**
|
|
* Copy a frame of data from the MAC into the protocol layer for further
|
|
* processing.
|
|
*/
|
|
static int ep93xx_eth_rcv_packet(struct eth_device *dev)
|
|
{
|
|
struct mac_regs *mac = GET_REGS(dev);
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
int len = -1;
|
|
|
|
debug("+ep93xx_eth_rcv_packet");
|
|
|
|
if (RX_STATUS_RFP(priv->rx_sq.current)) {
|
|
if (RX_STATUS_RWE(priv->rx_sq.current)) {
|
|
/*
|
|
* We have a good frame. Extract the frame's length
|
|
* from the current rx_status_queue entry, and copy
|
|
* the frame's data into net_rx_packets[] of the
|
|
* protocol stack. We track the total number of
|
|
* bytes in the frame (nbytes_frame) which will be
|
|
* used when we pass the data off to the protocol
|
|
* layer via net_process_received_packet().
|
|
*/
|
|
len = RX_STATUS_FRAME_LEN(priv->rx_sq.current);
|
|
|
|
net_process_received_packet(
|
|
(uchar *)priv->rx_dq.current->word1, len);
|
|
|
|
debug("reporting %d bytes...\n", len);
|
|
} else {
|
|
/* Do we have an erroneous packet? */
|
|
error("packet rx error, status %08X %08X",
|
|
priv->rx_sq.current->word1,
|
|
priv->rx_sq.current->word2);
|
|
dump_rx_descriptor_queue(dev);
|
|
dump_rx_status_queue(dev);
|
|
}
|
|
|
|
/*
|
|
* Clear the associated status queue entry, and
|
|
* increment our current pointers to the next RX
|
|
* descriptor and status queue entries (making sure
|
|
* we wrap properly).
|
|
*/
|
|
memset((void *)priv->rx_sq.current, 0,
|
|
sizeof(struct rx_status));
|
|
|
|
priv->rx_sq.current++;
|
|
if (priv->rx_sq.current >= priv->rx_sq.end)
|
|
priv->rx_sq.current = priv->rx_sq.base;
|
|
|
|
priv->rx_dq.current++;
|
|
if (priv->rx_dq.current >= priv->rx_dq.end)
|
|
priv->rx_dq.current = priv->rx_dq.base;
|
|
|
|
/*
|
|
* Finally, return the RX descriptor and status entries
|
|
* back to the MAC engine, and loop again, checking for
|
|
* more descriptors to process.
|
|
*/
|
|
writel(1, &mac->rxdqenq);
|
|
writel(1, &mac->rxstsqenq);
|
|
} else {
|
|
len = 0;
|
|
}
|
|
|
|
debug("-ep93xx_eth_rcv_packet %d", len);
|
|
return len;
|
|
}
|
|
|
|
/**
|
|
* Send a block of data via ethernet.
|
|
*/
|
|
static int ep93xx_eth_send_packet(struct eth_device *dev,
|
|
void * const packet, int const length)
|
|
{
|
|
struct mac_regs *mac = GET_REGS(dev);
|
|
struct ep93xx_priv *priv = GET_PRIV(dev);
|
|
int ret = -1;
|
|
|
|
debug("+ep93xx_eth_send_packet");
|
|
|
|
/* Parameter check */
|
|
BUG_ON(packet == NULL);
|
|
|
|
/*
|
|
* Initialize the TX descriptor queue with the new packet's info.
|
|
* Clear the associated status queue entry. Enqueue the packet
|
|
* to the MAC for transmission.
|
|
*/
|
|
|
|
/* set buffer address */
|
|
priv->tx_dq.current->word1 = (uint32_t)packet;
|
|
|
|
/* set buffer length and EOF bit */
|
|
priv->tx_dq.current->word2 = length | TX_DESC_EOF;
|
|
|
|
/* clear tx status */
|
|
priv->tx_sq.current->word1 = 0;
|
|
|
|
/* enqueue the TX descriptor */
|
|
writel(1, &mac->txdqenq);
|
|
|
|
/* wait for the frame to become processed */
|
|
while (!TX_STATUS_TXFP(priv->tx_sq.current))
|
|
; /* noop */
|
|
|
|
if (!TX_STATUS_TXWE(priv->tx_sq.current)) {
|
|
error("packet tx error, status %08X",
|
|
priv->tx_sq.current->word1);
|
|
dump_tx_descriptor_queue(dev);
|
|
dump_tx_status_queue(dev);
|
|
|
|
/* TODO: Add better error handling? */
|
|
goto eth_send_out;
|
|
}
|
|
|
|
ret = 0;
|
|
/* Fall through */
|
|
|
|
eth_send_out:
|
|
debug("-ep93xx_eth_send_packet %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_MII)
|
|
int ep93xx_miiphy_initialize(bd_t * const bd)
|
|
{
|
|
miiphy_register("ep93xx_eth0", ep93xx_miiphy_read, ep93xx_miiphy_write);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* Initialize the EP93xx MAC. The MAC hardware is reset. Buffers are
|
|
* allocated, if necessary, for the TX and RX descriptor and status queues,
|
|
* as well as for received packets. The EP93XX MAC hardware is initialized.
|
|
* Transmit and receive operations are enabled.
|
|
*/
|
|
int ep93xx_eth_initialize(u8 dev_num, int base_addr)
|
|
{
|
|
int ret = -1;
|
|
struct eth_device *dev;
|
|
struct ep93xx_priv *priv;
|
|
|
|
debug("+ep93xx_eth_initialize");
|
|
|
|
priv = malloc(sizeof(*priv));
|
|
if (!priv) {
|
|
error("malloc() failed");
|
|
goto eth_init_failed_0;
|
|
}
|
|
memset(priv, 0, sizeof(*priv));
|
|
|
|
priv->regs = (struct mac_regs *)base_addr;
|
|
|
|
priv->tx_dq.base = calloc(NUMTXDESC,
|
|
sizeof(struct tx_descriptor));
|
|
if (priv->tx_dq.base == NULL) {
|
|
error("calloc() failed");
|
|
goto eth_init_failed_1;
|
|
}
|
|
|
|
priv->tx_sq.base = calloc(NUMTXDESC,
|
|
sizeof(struct tx_status));
|
|
if (priv->tx_sq.base == NULL) {
|
|
error("calloc() failed");
|
|
goto eth_init_failed_2;
|
|
}
|
|
|
|
priv->rx_dq.base = calloc(NUMRXDESC,
|
|
sizeof(struct rx_descriptor));
|
|
if (priv->rx_dq.base == NULL) {
|
|
error("calloc() failed");
|
|
goto eth_init_failed_3;
|
|
}
|
|
|
|
priv->rx_sq.base = calloc(NUMRXDESC,
|
|
sizeof(struct rx_status));
|
|
if (priv->rx_sq.base == NULL) {
|
|
error("calloc() failed");
|
|
goto eth_init_failed_4;
|
|
}
|
|
|
|
dev = malloc(sizeof *dev);
|
|
if (dev == NULL) {
|
|
error("malloc() failed");
|
|
goto eth_init_failed_5;
|
|
}
|
|
memset(dev, 0, sizeof *dev);
|
|
|
|
dev->iobase = base_addr;
|
|
dev->priv = priv;
|
|
dev->init = ep93xx_eth_open;
|
|
dev->halt = ep93xx_eth_close;
|
|
dev->send = ep93xx_eth_send_packet;
|
|
dev->recv = ep93xx_eth_rcv_packet;
|
|
|
|
sprintf(dev->name, "ep93xx_eth-%hu", dev_num);
|
|
|
|
eth_register(dev);
|
|
|
|
/* Done! */
|
|
ret = 1;
|
|
goto eth_init_done;
|
|
|
|
eth_init_failed_5:
|
|
free(priv->rx_sq.base);
|
|
/* Fall through */
|
|
|
|
eth_init_failed_4:
|
|
free(priv->rx_dq.base);
|
|
/* Fall through */
|
|
|
|
eth_init_failed_3:
|
|
free(priv->tx_sq.base);
|
|
/* Fall through */
|
|
|
|
eth_init_failed_2:
|
|
free(priv->tx_dq.base);
|
|
/* Fall through */
|
|
|
|
eth_init_failed_1:
|
|
free(priv);
|
|
/* Fall through */
|
|
|
|
eth_init_failed_0:
|
|
/* Fall through */
|
|
|
|
eth_init_done:
|
|
debug("-ep93xx_eth_initialize %d", ret);
|
|
return ret;
|
|
}
|
|
|
|
#if defined(CONFIG_MII)
|
|
|
|
/**
|
|
* Maximum MII address we support
|
|
*/
|
|
#define MII_ADDRESS_MAX 31
|
|
|
|
/**
|
|
* Maximum MII register address we support
|
|
*/
|
|
#define MII_REGISTER_MAX 31
|
|
|
|
/**
|
|
* Read a 16-bit value from an MII register.
|
|
*/
|
|
static int ep93xx_miiphy_read(const char * const dev, unsigned char const addr,
|
|
unsigned char const reg, unsigned short * const value)
|
|
{
|
|
struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
|
|
int ret = -1;
|
|
uint32_t self_ctl;
|
|
|
|
debug("+ep93xx_miiphy_read");
|
|
|
|
/* Parameter checks */
|
|
BUG_ON(dev == NULL);
|
|
BUG_ON(addr > MII_ADDRESS_MAX);
|
|
BUG_ON(reg > MII_REGISTER_MAX);
|
|
BUG_ON(value == NULL);
|
|
|
|
/*
|
|
* Save the current SelfCTL register value. Set MAC to suppress
|
|
* preamble bits. Wait for any previous MII command to complete
|
|
* before issuing the new command.
|
|
*/
|
|
self_ctl = readl(&mac->selfctl);
|
|
#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
|
|
writel(self_ctl & ~(1 << 8), &mac->selfctl);
|
|
#endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
|
|
|
|
while (readl(&mac->miists) & MIISTS_BUSY)
|
|
; /* noop */
|
|
|
|
/*
|
|
* Issue the MII 'read' command. Wait for the command to complete.
|
|
* Read the MII data value.
|
|
*/
|
|
writel(MIICMD_OPCODE_READ | ((uint32_t)addr << 5) | (uint32_t)reg,
|
|
&mac->miicmd);
|
|
while (readl(&mac->miists) & MIISTS_BUSY)
|
|
; /* noop */
|
|
|
|
*value = (unsigned short)readl(&mac->miidata);
|
|
|
|
/* Restore the saved SelfCTL value and return. */
|
|
writel(self_ctl, &mac->selfctl);
|
|
|
|
ret = 0;
|
|
/* Fall through */
|
|
|
|
debug("-ep93xx_miiphy_read");
|
|
return ret;
|
|
}
|
|
|
|
/**
|
|
* Write a 16-bit value to an MII register.
|
|
*/
|
|
static int ep93xx_miiphy_write(const char * const dev, unsigned char const addr,
|
|
unsigned char const reg, unsigned short const value)
|
|
{
|
|
struct mac_regs *mac = (struct mac_regs *)MAC_BASE;
|
|
int ret = -1;
|
|
uint32_t self_ctl;
|
|
|
|
debug("+ep93xx_miiphy_write");
|
|
|
|
/* Parameter checks */
|
|
BUG_ON(dev == NULL);
|
|
BUG_ON(addr > MII_ADDRESS_MAX);
|
|
BUG_ON(reg > MII_REGISTER_MAX);
|
|
|
|
/*
|
|
* Save the current SelfCTL register value. Set MAC to suppress
|
|
* preamble bits. Wait for any previous MII command to complete
|
|
* before issuing the new command.
|
|
*/
|
|
self_ctl = readl(&mac->selfctl);
|
|
#if defined(CONFIG_MII_SUPPRESS_PREAMBLE)
|
|
writel(self_ctl & ~(1 << 8), &mac->selfctl);
|
|
#endif /* defined(CONFIG_MII_SUPPRESS_PREAMBLE) */
|
|
|
|
while (readl(&mac->miists) & MIISTS_BUSY)
|
|
; /* noop */
|
|
|
|
/* Issue the MII 'write' command. Wait for the command to complete. */
|
|
writel((uint32_t)value, &mac->miidata);
|
|
writel(MIICMD_OPCODE_WRITE | ((uint32_t)addr << 5) | (uint32_t)reg,
|
|
&mac->miicmd);
|
|
while (readl(&mac->miists) & MIISTS_BUSY)
|
|
; /* noop */
|
|
|
|
/* Restore the saved SelfCTL value and return. */
|
|
writel(self_ctl, &mac->selfctl);
|
|
|
|
ret = 0;
|
|
/* Fall through */
|
|
|
|
debug("-ep93xx_miiphy_write");
|
|
return ret;
|
|
}
|
|
#endif /* defined(CONFIG_MII) */
|