u-boot/drivers/net/xilinx_ll_temac_fifo.c
Joe Hershberger 1fd92db83d net: cosmetic: Fix var naming net <-> eth drivers
Update the naming convention used in the network stack functions and
variables that Ethernet drivers use to interact with it.

This cleans up the temporary hacks that were added to this interface
along with the DM support.

This patch has a few remaining checkpatch.pl failures that would be out
of the scope of this patch to fix (drivers that are in gross violation
of checkpatch.pl).

Signed-off-by: Joe Hershberger <joe.hershberger@ni.com>
Acked-by: Simon Glass <sjg@chromium.org>
2015-04-18 11:11:33 -06:00

139 lines
3.6 KiB
C

/*
* Xilinx xps_ll_temac ethernet driver for u-boot
*
* FIFO sub-controller
*
* Copyright (C) 2011 - 2012 Stephan Linz <linz@li-pro.net>
* Copyright (C) 2008 - 2011 Michal Simek <monstr@monstr.eu>
* Copyright (C) 2008 - 2011 PetaLogix
*
* Based on Yoshio Kashiwagi kashiwagi@co-nss.co.jp driver
* Copyright (C) 2008 Nissin Systems Co.,Ltd.
* March 2008 created
*
* CREDITS: tsec driver
*
* SPDX-License-Identifier: GPL-2.0+
*
* [0]: http://www.xilinx.com/support/documentation
*
* [F]: [0]/ip_documentation/xps_ll_fifo.pdf
* [S]: [0]/ip_documentation/xps_ll_temac.pdf
* [A]: [0]/application_notes/xapp1041.pdf
*/
#include <config.h>
#include <common.h>
#include <net.h>
#include <asm/types.h>
#include <asm/io.h>
#include "xilinx_ll_temac.h"
#include "xilinx_ll_temac_fifo.h"
int ll_temac_reset_fifo(struct eth_device *dev)
{
struct ll_temac *ll_temac = dev->priv;
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
out_be32(&fifo_ctrl->tdfr, LL_FIFO_TDFR_KEY);
out_be32(&fifo_ctrl->rdfr, LL_FIFO_RDFR_KEY);
out_be32(&fifo_ctrl->isr, ~0UL);
out_be32(&fifo_ctrl->ier, 0);
return 0;
}
int ll_temac_recv_fifo(struct eth_device *dev)
{
int i, length = 0;
u32 *buf = (u32 *)net_rx_packets[0];
struct ll_temac *ll_temac = dev->priv;
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
if (in_be32(&fifo_ctrl->isr) & LL_FIFO_ISR_RC) {
/* reset isr */
out_be32(&fifo_ctrl->isr, ~0UL);
/*
* MAYBE here:
* while (fifo_ctrl->isr);
*/
/*
* The length is written (into RLR) by the XPS LL FIFO
* when the packet is received across the RX LocalLink
* interface and the receive data FIFO had enough
* locations that all of the packet data has been saved.
* The RLR should only be read when a receive packet is
* available for processing (the receive occupancy is
* not zero). Once the RLR is read, the receive packet
* data should be read from the receive data FIFO before
* the RLR is read again.
*
* [F] page 17, Receive Length Register (RLR)
*/
if (in_be32(&fifo_ctrl->rdfo) & LL_FIFO_RDFO_MASK) {
length = in_be32(&fifo_ctrl->rlf) & LL_FIFO_RLF_MASK;
} else {
printf("%s: Got error, no receive occupancy\n",
__func__);
return -1;
}
if (length > PKTSIZE_ALIGN) {
printf("%s: Got error, receive package too big (%i)\n",
__func__, length);
ll_temac_reset_fifo(dev);
return -1;
}
for (i = 0; i < length; i += 4)
*buf++ = in_be32(&fifo_ctrl->rdfd);
net_process_received_packet(net_rx_packets[0], length);
}
return 0;
}
int ll_temac_send_fifo(struct eth_device *dev, void *packet, int length)
{
int i;
u32 *buf = (u32 *)packet;
struct ll_temac *ll_temac = dev->priv;
struct fifo_ctrl *fifo_ctrl = (void *)ll_temac->ctrladdr;
if (length < LL_FIFO_TLF_MIN) {
printf("%s: Got error, transmit package too small (%i)\n",
__func__, length);
return -1;
}
if (length > LL_FIFO_TLF_MAX) {
printf("%s: Got error, transmit package too big (%i)\n",
__func__, length);
return -1;
}
for (i = 0; i < length; i += 4)
out_be32(&fifo_ctrl->tdfd, *buf++);
/*
* Once the packet length is written to the TLR it is
* automatically moved to the transmit data FIFO with
* the packet data freeing up the TLR for another value.
* The packet length must be written to the TLR after
* the packet data is written to the transmit data FIFO.
* It is not valid to write data for multiple packets
* to the transmit data FIFO before writing the packet
* length values.
*
* [F] page 17, Transmit Length Register (TLR)
*/
out_be32(&fifo_ctrl->tlf, length);
return 0;
}