mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 10:18:38 +00:00
401d1c4f5d
Move this out of the common header and include it only where needed. In a number of cases this requires adding "struct udevice;" to avoid adding another large header or in other cases replacing / adding missing header files that had been pulled in, very indirectly. Finally, we have a few cases where we did not need to include <asm/global_data.h> at all, so remove that include. Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Rini <trini@konsulko.com>
318 lines
10 KiB
C
318 lines
10 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2013-2018 Hannes Schmelzer <oe5hpm@oevsv.at>
|
|
* B&R Industrial Automation GmbH - http://www.br-automation.com
|
|
* Copyright (C) 2020 Dario Binacchi <dariobin@libero.it>
|
|
*
|
|
* minimal framebuffer driver for TI's AM335x SoC to be compatible with
|
|
* Wolfgang Denk's LCD-Framework (CONFIG_LCD, common/lcd.c)
|
|
*
|
|
* - supporting 16/24/32bit RGB/TFT raster Mode (not using palette)
|
|
* - sets up LCD controller as in 'am335x_lcdpanel' struct given
|
|
* - starts output DMA from gd->fb_base buffer
|
|
*/
|
|
#include <common.h>
|
|
#include <lcd.h>
|
|
#include <log.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/hardware.h>
|
|
#include <asm/arch/omap.h>
|
|
#include <asm/arch/sys_proto.h>
|
|
#include <asm/global_data.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include "am335x-fb.h"
|
|
|
|
#define LCDC_FMAX 200000000
|
|
|
|
/* LCD Control Register */
|
|
#define LCDC_CTRL_CLK_DIVISOR_MASK GENMASK(15, 8)
|
|
#define LCDC_CTRL_RASTER_MODE BIT(0)
|
|
#define LCDC_CTRL_CLK_DIVISOR(x) (((x) & GENMASK(7, 0)) << 8)
|
|
/* LCD Clock Enable Register */
|
|
#define LCDC_CLKC_ENABLE_CORECLKEN BIT(0)
|
|
#define LCDC_CLKC_ENABLE_LIDDCLKEN BIT(1)
|
|
#define LCDC_CLKC_ENABLE_DMACLKEN BIT(2)
|
|
/* LCD DMA Control Register */
|
|
#define LCDC_DMA_CTRL_BURST_SIZE(x) (((x) & GENMASK(2, 0)) << 4)
|
|
#define LCDC_DMA_CTRL_BURST_1 0x0
|
|
#define LCDC_DMA_CTRL_BURST_2 0x1
|
|
#define LCDC_DMA_CTRL_BURST_4 0x2
|
|
#define LCDC_DMA_CTRL_BURST_8 0x3
|
|
#define LCDC_DMA_CTRL_BURST_16 0x4
|
|
#define LCDC_DMA_CTRL_FIFO_TH(x) (((x) & GENMASK(2, 0)) << 8)
|
|
/* LCD Timing_0 Register */
|
|
#define LCDC_RASTER_TIMING_0_HORMSB(x) ((((x) - 1) & BIT(10)) >> 7)
|
|
#define LCDC_RASTER_TIMING_0_HORLSB(x) (((((x) >> 4) - 1) & GENMASK(5, 0)) << 4)
|
|
#define LCDC_RASTER_TIMING_0_HSWLSB(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
|
|
#define LCDC_RASTER_TIMING_0_HFPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 16)
|
|
#define LCDC_RASTER_TIMING_0_HBPLSB(x) ((((x) - 1) & GENMASK(7, 0)) << 24)
|
|
/* LCD Timing_1 Register */
|
|
#define LCDC_RASTER_TIMING_1_VERLSB(x) (((x) - 1) & GENMASK(9, 0))
|
|
#define LCDC_RASTER_TIMING_1_VSW(x) ((((x) - 1) & GENMASK(5, 0)) << 10)
|
|
#define LCDC_RASTER_TIMING_1_VFP(x) (((x) & GENMASK(7, 0)) << 16)
|
|
#define LCDC_RASTER_TIMING_1_VBP(x) (((x) & GENMASK(7, 0)) << 24)
|
|
/* LCD Timing_2 Register */
|
|
#define LCDC_RASTER_TIMING_2_HFPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 8)
|
|
#define LCDC_RASTER_TIMING_2_HBPMSB(x) ((((x) - 1) & GENMASK(9, 8)) >> 4)
|
|
#define LCDC_RASTER_TIMING_2_ACB(x) (((x) & GENMASK(7, 0)) << 8)
|
|
#define LCDC_RASTER_TIMING_2_ACBI(x) (((x) & GENMASK(3, 0)) << 16)
|
|
#define LCDC_RASTER_TIMING_2_VSYNC_INVERT BIT(20)
|
|
#define LCDC_RASTER_TIMING_2_HSYNC_INVERT BIT(21)
|
|
#define LCDC_RASTER_TIMING_2_PXCLK_INVERT BIT(22)
|
|
#define LCDC_RASTER_TIMING_2_DE_INVERT BIT(23)
|
|
#define LCDC_RASTER_TIMING_2_HSVS_RISEFALL BIT(24)
|
|
#define LCDC_RASTER_TIMING_2_HSVS_CONTROL BIT(25)
|
|
#define LCDC_RASTER_TIMING_2_VERMSB(x) ((((x) - 1) & BIT(10)) << 16)
|
|
#define LCDC_RASTER_TIMING_2_HSWMSB(x) ((((x) - 1) & GENMASK(9, 6)) << 21)
|
|
/* LCD Raster Ctrl Register */
|
|
#define LCDC_RASTER_CTRL_ENABLE BIT(0)
|
|
#define LCDC_RASTER_CTRL_TFT_MODE BIT(7)
|
|
#define LCDC_RASTER_CTRL_DATA_ORDER BIT(8)
|
|
#define LCDC_RASTER_CTRL_REQDLY(x) (((x) & GENMASK(7, 0)) << 12)
|
|
#define LCDC_RASTER_CTRL_PALMODE_RAWDATA (0x02 << 20)
|
|
#define LCDC_RASTER_CTRL_TFT_ALT_ENABLE BIT(23)
|
|
#define LCDC_RASTER_CTRL_TFT_24BPP_MODE BIT(25)
|
|
#define LCDC_RASTER_CTRL_TFT_24BPP_UNPACK BIT(26)
|
|
|
|
struct am335x_lcdhw {
|
|
unsigned int pid; /* 0x00 */
|
|
unsigned int ctrl; /* 0x04 */
|
|
unsigned int gap0; /* 0x08 */
|
|
unsigned int lidd_ctrl; /* 0x0C */
|
|
unsigned int lidd_cs0_conf; /* 0x10 */
|
|
unsigned int lidd_cs0_addr; /* 0x14 */
|
|
unsigned int lidd_cs0_data; /* 0x18 */
|
|
unsigned int lidd_cs1_conf; /* 0x1C */
|
|
unsigned int lidd_cs1_addr; /* 0x20 */
|
|
unsigned int lidd_cs1_data; /* 0x24 */
|
|
unsigned int raster_ctrl; /* 0x28 */
|
|
unsigned int raster_timing0; /* 0x2C */
|
|
unsigned int raster_timing1; /* 0x30 */
|
|
unsigned int raster_timing2; /* 0x34 */
|
|
unsigned int raster_subpanel; /* 0x38 */
|
|
unsigned int raster_subpanel2; /* 0x3C */
|
|
unsigned int lcddma_ctrl; /* 0x40 */
|
|
unsigned int lcddma_fb0_base; /* 0x44 */
|
|
unsigned int lcddma_fb0_ceiling; /* 0x48 */
|
|
unsigned int lcddma_fb1_base; /* 0x4C */
|
|
unsigned int lcddma_fb1_ceiling; /* 0x50 */
|
|
unsigned int sysconfig; /* 0x54 */
|
|
unsigned int irqstatus_raw; /* 0x58 */
|
|
unsigned int irqstatus; /* 0x5C */
|
|
unsigned int irqenable_set; /* 0x60 */
|
|
unsigned int irqenable_clear; /* 0x64 */
|
|
unsigned int gap1; /* 0x68 */
|
|
unsigned int clkc_enable; /* 0x6C */
|
|
unsigned int clkc_reset; /* 0x70 */
|
|
};
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
#if !defined(LCD_CNTL_BASE)
|
|
#error "hw-base address of LCD-Controller (LCD_CNTL_BASE) not defined!"
|
|
#endif
|
|
|
|
/* Macro definitions */
|
|
#define FBSIZE(x) (((x)->hactive * (x)->vactive * (x)->bpp) >> 3)
|
|
|
|
#define LCDC_RASTER_TIMING_2_INVMASK(x) ((x) & GENMASK(25, 20))
|
|
|
|
static struct am335x_lcdhw *lcdhw = (void *)LCD_CNTL_BASE;
|
|
|
|
int lcd_get_size(int *line_length)
|
|
{
|
|
*line_length = (panel_info.vl_col * NBITS(panel_info.vl_bpix)) / 8;
|
|
return *line_length * panel_info.vl_row + 0x20;
|
|
}
|
|
|
|
struct dpll_data {
|
|
unsigned long rounded_rate;
|
|
u16 rounded_m;
|
|
u8 rounded_n;
|
|
u8 rounded_div;
|
|
};
|
|
|
|
/**
|
|
* am335x_dpll_round_rate() - Round a target rate for an OMAP DPLL
|
|
*
|
|
* @dpll_data: struct dpll_data pointer for the DPLL
|
|
* @rate: New DPLL clock rate
|
|
* @return rounded rate and the computed m, n and div values in the dpll_data
|
|
* structure, or -ve error code.
|
|
*/
|
|
static ulong am335x_dpll_round_rate(struct dpll_data *dd, ulong rate)
|
|
{
|
|
unsigned int m, n, d;
|
|
unsigned long rounded_rate;
|
|
int err, err_r;
|
|
|
|
dd->rounded_rate = -EFAULT;
|
|
err = rate;
|
|
err_r = err;
|
|
|
|
for (d = 2; err && d < 255; d++) {
|
|
for (m = 2; m < 2047; m++) {
|
|
if ((V_OSCK * m) < (rate * d))
|
|
continue;
|
|
|
|
n = (V_OSCK * m) / (rate * d);
|
|
if (n > 127)
|
|
break;
|
|
|
|
if (((V_OSCK * m) / n) > LCDC_FMAX)
|
|
break;
|
|
|
|
rounded_rate = (V_OSCK * m) / n / d;
|
|
err = abs(rounded_rate - rate);
|
|
if (err < err_r) {
|
|
err_r = err;
|
|
dd->rounded_rate = rounded_rate;
|
|
dd->rounded_m = m;
|
|
dd->rounded_n = n;
|
|
dd->rounded_div = d;
|
|
if (err == 0)
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
debug("DPLL display: best error %d Hz (M %d, N %d, DIV %d)\n",
|
|
err_r, dd->rounded_m, dd->rounded_n, dd->rounded_div);
|
|
|
|
return dd->rounded_rate;
|
|
}
|
|
|
|
/**
|
|
* am335x_fb_set_pixel_clk_rate() - Set pixel clock rate.
|
|
*
|
|
* @am335x_lcdhw: Base address of the LCD controller registers.
|
|
* @rate: New clock rate in Hz.
|
|
* @return new rate, or -ve error code.
|
|
*/
|
|
static ulong am335x_fb_set_pixel_clk_rate(struct am335x_lcdhw *regs, ulong rate)
|
|
{
|
|
struct dpll_params dpll_disp = { 1, 0, 1, -1, -1, -1, -1 };
|
|
struct dpll_data dd;
|
|
ulong round_rate;
|
|
u32 reg;
|
|
|
|
round_rate = am335x_dpll_round_rate(&dd, rate);
|
|
if (IS_ERR_VALUE(round_rate))
|
|
return round_rate;
|
|
|
|
dpll_disp.m = dd.rounded_m;
|
|
dpll_disp.n = dd.rounded_n;
|
|
do_setup_dpll(&dpll_disp_regs, &dpll_disp);
|
|
|
|
reg = readl(®s->ctrl) & ~LCDC_CTRL_CLK_DIVISOR_MASK;
|
|
reg |= LCDC_CTRL_CLK_DIVISOR(dd.rounded_div);
|
|
writel(reg, ®s->ctrl);
|
|
return round_rate;
|
|
}
|
|
|
|
int am335xfb_init(struct am335x_lcdpanel *panel)
|
|
{
|
|
u32 raster_ctrl = 0;
|
|
struct cm_dpll *const cmdpll = (struct cm_dpll *)CM_DPLL;
|
|
ulong rate;
|
|
u32 reg;
|
|
|
|
if (gd->fb_base == 0) {
|
|
printf("ERROR: no valid fb_base stored in GLOBAL_DATA_PTR!\n");
|
|
return -1;
|
|
}
|
|
if (panel == NULL) {
|
|
printf("ERROR: missing ptr to am335x_lcdpanel!\n");
|
|
return -1;
|
|
}
|
|
|
|
/* We can already set the bits for the raster_ctrl in this check */
|
|
switch (panel->bpp) {
|
|
case 16:
|
|
break;
|
|
case 32:
|
|
raster_ctrl |= LCDC_RASTER_CTRL_TFT_24BPP_UNPACK;
|
|
/* fallthrough */
|
|
case 24:
|
|
raster_ctrl |= LCDC_RASTER_CTRL_TFT_24BPP_MODE;
|
|
break;
|
|
default:
|
|
pr_err("am335x-fb: invalid bpp value: %d\n", panel->bpp);
|
|
return -1;
|
|
}
|
|
|
|
/* check given clock-frequency */
|
|
if (panel->pxl_clk > (LCDC_FMAX / 2)) {
|
|
pr_err("am335x-fb: requested pxl-clk: %d not supported!\n",
|
|
panel->pxl_clk);
|
|
return -1;
|
|
}
|
|
|
|
debug("setting up LCD-Controller for %dx%dx%d (hfp=%d,hbp=%d,hsw=%d / ",
|
|
panel->hactive, panel->vactive, panel->bpp,
|
|
panel->hfp, panel->hbp, panel->hsw);
|
|
debug("vfp=%d,vbp=%d,vsw=%d / clk=%d)\n",
|
|
panel->vfp, panel->vfp, panel->vsw, panel->pxl_clk);
|
|
debug("using frambuffer at 0x%08x with size %d.\n",
|
|
(unsigned int)gd->fb_base, FBSIZE(panel));
|
|
|
|
rate = am335x_fb_set_pixel_clk_rate(lcdhw, panel->pxl_clk);
|
|
if (IS_ERR_VALUE(rate))
|
|
return rate;
|
|
|
|
/* clock source for LCDC from dispPLL M2 */
|
|
writel(0x0, &cmdpll->clklcdcpixelclk);
|
|
|
|
/* palette default entry */
|
|
memset((void *)gd->fb_base, 0, 0x20);
|
|
*(unsigned int *)gd->fb_base = 0x4000;
|
|
/* point fb behind palette */
|
|
gd->fb_base += 0x20;
|
|
|
|
/* turn ON display through powercontrol function if accessible */
|
|
if (panel->panel_power_ctrl != NULL)
|
|
panel->panel_power_ctrl(1);
|
|
|
|
debug("am335x-fb: wait for stable power ...\n");
|
|
mdelay(panel->pup_delay);
|
|
lcdhw->clkc_enable = LCDC_CLKC_ENABLE_CORECLKEN |
|
|
LCDC_CLKC_ENABLE_LIDDCLKEN | LCDC_CLKC_ENABLE_DMACLKEN;
|
|
lcdhw->raster_ctrl = 0;
|
|
|
|
reg = lcdhw->ctrl & LCDC_CTRL_CLK_DIVISOR_MASK;
|
|
reg |= LCDC_CTRL_RASTER_MODE;
|
|
lcdhw->ctrl = reg;
|
|
|
|
lcdhw->lcddma_fb0_base = gd->fb_base;
|
|
lcdhw->lcddma_fb0_ceiling = gd->fb_base + FBSIZE(panel);
|
|
lcdhw->lcddma_fb1_base = gd->fb_base;
|
|
lcdhw->lcddma_fb1_ceiling = gd->fb_base + FBSIZE(panel);
|
|
lcdhw->lcddma_ctrl = LCDC_DMA_CTRL_BURST_SIZE(LCDC_DMA_CTRL_BURST_16);
|
|
|
|
lcdhw->raster_timing0 = LCDC_RASTER_TIMING_0_HORLSB(panel->hactive) |
|
|
LCDC_RASTER_TIMING_0_HORMSB(panel->hactive) |
|
|
LCDC_RASTER_TIMING_0_HFPLSB(panel->hfp) |
|
|
LCDC_RASTER_TIMING_0_HBPLSB(panel->hbp) |
|
|
LCDC_RASTER_TIMING_0_HSWLSB(panel->hsw);
|
|
lcdhw->raster_timing1 = LCDC_RASTER_TIMING_1_VBP(panel->vbp) |
|
|
LCDC_RASTER_TIMING_1_VFP(panel->vfp) |
|
|
LCDC_RASTER_TIMING_1_VSW(panel->vsw) |
|
|
LCDC_RASTER_TIMING_1_VERLSB(panel->vactive);
|
|
lcdhw->raster_timing2 = LCDC_RASTER_TIMING_2_HSWMSB(panel->hsw) |
|
|
LCDC_RASTER_TIMING_2_VERMSB(panel->vactive) |
|
|
LCDC_RASTER_TIMING_2_INVMASK(panel->pol) |
|
|
LCDC_RASTER_TIMING_2_HBPMSB(panel->hbp) |
|
|
LCDC_RASTER_TIMING_2_HFPMSB(panel->hfp) |
|
|
0x0000FF00; /* clk cycles for ac-bias */
|
|
lcdhw->raster_ctrl = raster_ctrl |
|
|
LCDC_RASTER_CTRL_PALMODE_RAWDATA |
|
|
LCDC_RASTER_CTRL_TFT_MODE |
|
|
LCDC_RASTER_CTRL_ENABLE;
|
|
|
|
debug("am335x-fb: waiting picture to be stable.\n.");
|
|
mdelay(panel->pon_delay);
|
|
|
|
return 0;
|
|
}
|