mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-03 01:50:25 +00:00
f6953047cb
This value is not used by u-boot, and it should not. The load address
of an OPTEE image is defined by said image. Either a uImage or a FIT
will have a defined load address and entry point. Those values are the
correct ones, not CONFIG_OPTEE_LOAD_ADDR.
Commit f25006b96e ("optee: Add CONFIG_OPTEE_LOAD_ADDR") justifies
this config by requiring its presence in u-boot's .config for other
images as part of a larger build, claiming it is "the best way".
This argument is not persuasive. U-boot's configuration is driven by
platform requirements, not the other way around. It seems more likely
that the argument is conflating tooling issues with Kconfig. Yocto and
buildroot have excellent mechanisms for defining values across the
board (pun intended). u-boot's Kconfig is the wrong place to do it.
Furthermore, it is not "best" for u-boot because it hardcodes a value
which is then not used. In fact the load address that u-boot uses is
the one derived from the OPTEE image.
Confused yet? I sure was. To prevent future confusion, remove
CONFIG_OPTEE_LOAD_ADDR.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
143 lines
4.2 KiB
C
143 lines
4.2 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* Copyright (C) 2016 NXP Semiconductors
|
|
*
|
|
* Configuration settings for the i.MX7S Warp board.
|
|
*/
|
|
|
|
#ifndef __WARP7_CONFIG_H
|
|
#define __WARP7_CONFIG_H
|
|
|
|
#include "mx7_common.h"
|
|
#include <imximage.h>
|
|
|
|
#define PHYS_SDRAM_SIZE SZ_512M
|
|
|
|
/* MMC Config*/
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR USDHC3_BASE_ADDR
|
|
#define CONFIG_SYS_FSL_ESDHC_HAS_DDR_MODE
|
|
#define CONFIG_SYS_MMC_IMG_LOAD_PART 1
|
|
|
|
#define CONFIG_DFU_ENV_SETTINGS \
|
|
"dfu_alt_info=boot raw 0x2 0x1000 mmcpart 1\0" \
|
|
|
|
/* When booting with FIT specify the node entry containing boot.scr */
|
|
#if defined(CONFIG_FIT)
|
|
#define BOOT_SCR_STRING "source ${bootscriptaddr}:${bootscr_fitimage_name}\0"
|
|
#else
|
|
#define BOOT_SCR_STRING "source ${bootscriptaddr}\0"
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_DFU_ENV_SETTINGS \
|
|
"script=boot.scr\0" \
|
|
"bootscr_fitimage_name=bootscr\0" \
|
|
"script_signed=boot.scr.imx-signed\0" \
|
|
"bootscriptaddr=0x83200000\0" \
|
|
"image=zImage\0" \
|
|
"console=ttymxc0\0" \
|
|
"ethact=usb_ether\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"fdt_file=imx7s-warp.dtb\0" \
|
|
"fdt_addr=" __stringify(CONFIG_SYS_FDT_ADDR)"\0" \
|
|
"fdtovaddr=0x83100000\0" \
|
|
"boot_fdt=try\0" \
|
|
"ip_dyn=yes\0" \
|
|
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
|
"mmcpart=" __stringify(CONFIG_SYS_MMC_IMG_LOAD_PART) "\0" \
|
|
"rootpart=" __stringify(CONFIG_WARP7_ROOT_PART) "\0" \
|
|
"finduuid=part uuid mmc 0:${rootpart} uuid\0" \
|
|
"mmcargs=setenv bootargs console=${console},${baudrate} " \
|
|
"root=PARTUUID=${uuid} rootwait rw\0" \
|
|
"ivt_offset=" __stringify(BOOTROM_IVT_HDR_OFFSET)"\0"\
|
|
"warp7_auth_or_fail=hab_auth_img_or_fail ${hab_ivt_addr} ${filesize} 0;\0" \
|
|
"do_bootscript_hab=" \
|
|
"if test ${hab_enabled} -eq 1; then " \
|
|
"setexpr hab_ivt_addr ${bootscriptaddr} - ${ivt_offset}; " \
|
|
"setenv script ${script_signed}; " \
|
|
"load mmc ${mmcdev}:${mmcpart} ${hab_ivt_addr} ${script}; " \
|
|
"run warp7_auth_or_fail; " \
|
|
"run bootscript; "\
|
|
"fi;\0" \
|
|
"loadbootscript=" \
|
|
"load mmc ${mmcdev}:${mmcpart} ${bootscriptaddr} ${script};\0" \
|
|
"bootscript=echo Running bootscript from mmc ...; " \
|
|
BOOT_SCR_STRING \
|
|
"loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
|
|
"loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"run finduuid; " \
|
|
"run mmcargs; " \
|
|
"if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
|
|
"if run loadfdt; then " \
|
|
"bootz ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"if test ${boot_fdt} = try; then " \
|
|
"bootz; " \
|
|
"else " \
|
|
"echo WARN: Cannot load the DT; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"else " \
|
|
"bootz; " \
|
|
"fi;\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"mmc dev ${mmcdev};" \
|
|
"mmc dev ${mmcdev}; if mmc rescan; then " \
|
|
"run do_bootscript_hab;" \
|
|
"if run loadbootscript; then " \
|
|
"run bootscript; " \
|
|
"else " \
|
|
"if run loadimage; then " \
|
|
"run mmcboot; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi"
|
|
|
|
#define CONFIG_SYS_HZ 1000
|
|
|
|
/* Physical Memory Map */
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/*
|
|
* Environment starts at CONFIG_ENV_OFFSET= 0xC0000 = 768k = 768*1024 = 786432
|
|
*
|
|
* Detect overlap between U-Boot image and environment area in build-time
|
|
*
|
|
* CONFIG_BOARD_SIZE_LIMIT = CONFIG_ENV_OFFSET - u-boot.imx offset
|
|
* CONFIG_BOARD_SIZE_LIMIT = 768k - 1k = 767k = 785408
|
|
*
|
|
* Currently CONFIG_BOARD_SIZE_LIMIT does not handle expressions, so
|
|
* write the direct value here
|
|
*/
|
|
#define CONFIG_BOARD_SIZE_LIMIT 785408
|
|
|
|
/* environment organization */
|
|
|
|
#define CONFIG_SYS_FSL_USDHC_NUM 1
|
|
|
|
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
|
|
#define CONFIG_USBD_HS
|
|
|
|
/* USB Device Firmware Update support */
|
|
#define DFU_DEFAULT_POLL_TIMEOUT 300
|
|
|
|
#define CONFIG_USBNET_DEV_ADDR "de:ad:be:af:00:01"
|
|
|
|
/* Environment variable name to represent HAB enable state */
|
|
#define HAB_ENABLED_ENVNAME "hab_enabled"
|
|
|
|
#endif
|