mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
588 lines
9.2 KiB
Text
588 lines
9.2 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Device Tree file for the Guntermann & Drunck ControlCenter-Compact board
|
|
*
|
|
* Copyright (C) 2016 Mario Six <mario.six@gdsys.cc>
|
|
*
|
|
* based on the Device Tree file for Marvell Armada 388 evaluation board
|
|
* (DB-88F6820), which is
|
|
*
|
|
* Copyright (C) 2014 Marvell
|
|
*
|
|
* Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "armada-388.dtsi"
|
|
|
|
&gpio0 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&gpio1 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&uart0 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
&uart1 {
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
|
|
/ {
|
|
model = "Controlcenter Digital Compact";
|
|
compatible = "marvell,a385-db", "marvell,armada388",
|
|
"marvell,armada385", "marvell,armada380";
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS1,115200 earlyprintk";
|
|
stdout-path = "/soc/internal-regs/serial@12100";
|
|
};
|
|
|
|
aliases {
|
|
ethernet0 = ð0;
|
|
ethernet2 = ð2;
|
|
mdio-gpio0 = &MDIO0;
|
|
mdio-gpio1 = &MDIO1;
|
|
mdio-gpio2 = &MDIO2;
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
i2c0 = &I2C0;
|
|
i2c1 = &I2C1;
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>; /* 256 MB */
|
|
};
|
|
|
|
clocks {
|
|
sc16isclk: sc16isclk {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <0>;
|
|
clock-frequency = <11059200>;
|
|
};
|
|
};
|
|
|
|
soc {
|
|
ranges = <MBUS_ID(0xf0, 0x01) 0 0xf1000000 0x100000
|
|
MBUS_ID(0x01, 0x1d) 0 0xfff00000 0x100000>;
|
|
|
|
internal-regs {
|
|
spi0: spi@10600 {
|
|
status = "okay";
|
|
sc16is741: sc16is741@0 {
|
|
compatible = "nxp,sc16is741";
|
|
reg = <0>;
|
|
clocks = <&sc16isclk>;
|
|
spi-max-frequency = <4000000>;
|
|
interrupt-parent = <&gpio0>;
|
|
interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
spi1: spi@10680 {
|
|
status = "okay";
|
|
u-boot,dm-pre-reloc;
|
|
spi-flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "n25q016a";
|
|
reg = <0>; /* Chip select 0 */
|
|
spi-max-frequency = <108000000>;
|
|
};
|
|
spi-flash@1 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "n25q128a11";
|
|
reg = <1>; /* Chip select 1 */
|
|
spi-max-frequency = <108000000>;
|
|
u-boot,dm-pre-reloc;
|
|
};
|
|
};
|
|
|
|
I2C0: i2c@11000 {
|
|
status = "okay";
|
|
clock-frequency = <1000000>;
|
|
u-boot,dm-pre-reloc;
|
|
PCA21: pca9698@21 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x21>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA22: pca9698@22 {
|
|
compatible = "nxp,pca9698";
|
|
u-boot,dm-pre-reloc;
|
|
reg = <0x22>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA23: pca9698@23 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x23>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA24: pca9698@24 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x24>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA25: pca9698@25 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x25>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
PCA26: pca9698@26 {
|
|
compatible = "nxp,pca9698";
|
|
reg = <0x26>;
|
|
#gpio-cells = <2>;
|
|
gpio-controller;
|
|
};
|
|
};
|
|
|
|
I2C1: i2c@11100 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
at97sc3205t@29 {
|
|
compatible = "atmel,at97sc3204t";
|
|
reg = <0x29>;
|
|
u-boot,i2c-offset-len = <0>;
|
|
};
|
|
emc2305@2d {
|
|
compatible = "smsc,emc2305";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2d>;
|
|
fan@0 {
|
|
reg = <0>;
|
|
};
|
|
fan@1 {
|
|
reg = <1>;
|
|
};
|
|
fan@2 {
|
|
reg = <2>;
|
|
};
|
|
fan@3 {
|
|
reg = <3>;
|
|
};
|
|
fan@4 {
|
|
reg = <4>;
|
|
};
|
|
};
|
|
lm77@48 {
|
|
compatible = "national,lm77";
|
|
reg = <0x48>;
|
|
};
|
|
ads1015@49 {
|
|
compatible = "ti,ads1015";
|
|
reg = <0x49>;
|
|
};
|
|
lm77@4a {
|
|
compatible = "national,lm77";
|
|
reg = <0x4a>;
|
|
};
|
|
ads1015@4b {
|
|
compatible = "ti,ads1015";
|
|
reg = <0x4b>;
|
|
};
|
|
emc2305@4c {
|
|
compatible = "smsc,emc2305";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x4c>;
|
|
fan@0 {
|
|
reg = <0>;
|
|
};
|
|
fan@1 {
|
|
reg = <1>;
|
|
};
|
|
fan@2 {
|
|
reg = <2>;
|
|
};
|
|
fan@3 {
|
|
reg = <3>;
|
|
};
|
|
fan@4 {
|
|
reg = <4>;
|
|
};
|
|
};
|
|
at24c512@54 {
|
|
compatible = "atmel,24c512";
|
|
reg = <0x54>;
|
|
u-boot,i2c-offset-len = <2>;
|
|
};
|
|
ds1339@68 {
|
|
compatible = "dallas,ds1339";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
serial@12000 {
|
|
status = "okay";
|
|
};
|
|
|
|
serial@12100 {
|
|
status = "okay";
|
|
};
|
|
|
|
ethernet@34000 {
|
|
status = "okay";
|
|
phy = <&phy1>;
|
|
phy-mode = "sgmii";
|
|
};
|
|
|
|
usb@58000 {
|
|
status = "ok";
|
|
};
|
|
|
|
ethernet@70000 {
|
|
status = "okay";
|
|
phy = <&phy0>;
|
|
phy-mode = "sgmii";
|
|
};
|
|
|
|
mdio@72004 {
|
|
phy0: ethernet-phy@0 {
|
|
reg = <1>;
|
|
};
|
|
|
|
phy1: ethernet-phy@1 {
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
sata@a8000 {
|
|
status = "okay";
|
|
};
|
|
|
|
sdhci@d8000 {
|
|
broken-cd;
|
|
wp-inverted;
|
|
bus-width = <4>;
|
|
status = "okay";
|
|
no-1-8-v;
|
|
};
|
|
|
|
usb3@f0000 {
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
pcie-controller {
|
|
status = "okay";
|
|
/*
|
|
* The two PCIe units are accessible through
|
|
* standard PCIe slots on the board.
|
|
*/
|
|
pcie@3,0 {
|
|
/* Port 0, Lane 0 */
|
|
status = "okay";
|
|
};
|
|
};
|
|
|
|
MDIO0: mdio0 {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = < /*MDC*/ &gpio0 13 0
|
|
/*MDIO*/ &gpio0 14 0>;
|
|
mv88e1240@0 {
|
|
reg = <0x0>;
|
|
};
|
|
mv88e1240@1 {
|
|
reg = <0x1>;
|
|
};
|
|
mv88e1240@2 {
|
|
reg = <0x2>;
|
|
};
|
|
mv88e1240@3 {
|
|
reg = <0x3>;
|
|
};
|
|
mv88e1240@4 {
|
|
reg = <0x4>;
|
|
};
|
|
mv88e1240@5 {
|
|
reg = <0x5>;
|
|
};
|
|
mv88e1240@6 {
|
|
reg = <0x6>;
|
|
};
|
|
mv88e1240@7 {
|
|
reg = <0x7>;
|
|
};
|
|
mv88e1240@8 {
|
|
reg = <0x8>;
|
|
};
|
|
mv88e1240@9 {
|
|
reg = <0x9>;
|
|
};
|
|
mv88e1240@a {
|
|
reg = <0xa>;
|
|
};
|
|
mv88e1240@b {
|
|
reg = <0xb>;
|
|
};
|
|
mv88e1240@c {
|
|
reg = <0xc>;
|
|
};
|
|
mv88e1240@d {
|
|
reg = <0xd>;
|
|
};
|
|
mv88e1240@e {
|
|
reg = <0xe>;
|
|
};
|
|
mv88e1240@f {
|
|
reg = <0xf>;
|
|
};
|
|
mv88e1240@10 {
|
|
reg = <0x10>;
|
|
};
|
|
mv88e1240@11 {
|
|
reg = <0x11>;
|
|
};
|
|
mv88e1240@12 {
|
|
reg = <0x12>;
|
|
};
|
|
mv88e1240@13 {
|
|
reg = <0x13>;
|
|
};
|
|
mv88e1240@14 {
|
|
reg = <0x14>;
|
|
};
|
|
mv88e1240@15 {
|
|
reg = <0x15>;
|
|
};
|
|
mv88e1240@16 {
|
|
reg = <0x16>;
|
|
};
|
|
mv88e1240@17 {
|
|
reg = <0x17>;
|
|
};
|
|
mv88e1240@18 {
|
|
reg = <0x18>;
|
|
};
|
|
mv88e1240@19 {
|
|
reg = <0x19>;
|
|
};
|
|
mv88e1240@1a {
|
|
reg = <0x1a>;
|
|
};
|
|
mv88e1240@1b {
|
|
reg = <0x1b>;
|
|
};
|
|
mv88e1240@1c {
|
|
reg = <0x1c>;
|
|
};
|
|
mv88e1240@1d {
|
|
reg = <0x1d>;
|
|
};
|
|
mv88e1240@1e {
|
|
reg = <0x1e>;
|
|
};
|
|
mv88e1240@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|
|
|
|
MDIO1: mdio1 {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = < /*MDC*/ &gpio0 25 0
|
|
/*MDIO*/ &gpio1 13 0>;
|
|
mv88e1240@0 {
|
|
reg = <0x0>;
|
|
};
|
|
mv88e1240@1 {
|
|
reg = <0x1>;
|
|
};
|
|
mv88e1240@2 {
|
|
reg = <0x2>;
|
|
};
|
|
mv88e1240@3 {
|
|
reg = <0x3>;
|
|
};
|
|
mv88e1240@4 {
|
|
reg = <0x4>;
|
|
};
|
|
mv88e1240@5 {
|
|
reg = <0x5>;
|
|
};
|
|
mv88e1240@6 {
|
|
reg = <0x6>;
|
|
};
|
|
mv88e1240@7 {
|
|
reg = <0x7>;
|
|
};
|
|
mv88e1240@8 {
|
|
reg = <0x8>;
|
|
};
|
|
mv88e1240@9 {
|
|
reg = <0x9>;
|
|
};
|
|
mv88e1240@a {
|
|
reg = <0xa>;
|
|
};
|
|
mv88e1240@b {
|
|
reg = <0xb>;
|
|
};
|
|
mv88e1240@c {
|
|
reg = <0xc>;
|
|
};
|
|
mv88e1240@d {
|
|
reg = <0xd>;
|
|
};
|
|
mv88e1240@e {
|
|
reg = <0xe>;
|
|
};
|
|
mv88e1240@f {
|
|
reg = <0xf>;
|
|
};
|
|
mv88e1240@10 {
|
|
reg = <0x10>;
|
|
};
|
|
mv88e1240@11 {
|
|
reg = <0x11>;
|
|
};
|
|
mv88e1240@12 {
|
|
reg = <0x12>;
|
|
};
|
|
mv88e1240@13 {
|
|
reg = <0x13>;
|
|
};
|
|
mv88e1240@14 {
|
|
reg = <0x14>;
|
|
};
|
|
mv88e1240@15 {
|
|
reg = <0x15>;
|
|
};
|
|
mv88e1240@16 {
|
|
reg = <0x16>;
|
|
};
|
|
mv88e1240@17 {
|
|
reg = <0x17>;
|
|
};
|
|
mv88e1240@18 {
|
|
reg = <0x18>;
|
|
};
|
|
mv88e1240@19 {
|
|
reg = <0x19>;
|
|
};
|
|
mv88e1240@1a {
|
|
reg = <0x1a>;
|
|
};
|
|
mv88e1240@1b {
|
|
reg = <0x1b>;
|
|
};
|
|
mv88e1240@1c {
|
|
reg = <0x1c>;
|
|
};
|
|
mv88e1240@1d {
|
|
reg = <0x1d>;
|
|
};
|
|
mv88e1240@1e {
|
|
reg = <0x1e>;
|
|
};
|
|
mv88e1240@1f {
|
|
reg = <0x1f>;
|
|
};
|
|
};
|
|
|
|
MDIO2: mdio2 {
|
|
compatible = "virtual,mdio-gpio";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
gpios = < /*MDC*/ &gpio1 14 0
|
|
/*MDIO*/ &gpio0 24 0>;
|
|
mv88e1240@0 {
|
|
reg = <0x0>;
|
|
};
|
|
mv88e1240@1 {
|
|
reg = <0x1>;
|
|
};
|
|
mv88e1240@2 {
|
|
reg = <0x2>;
|
|
};
|
|
mv88e1240@3 {
|
|
reg = <0x3>;
|
|
};
|
|
mv88e1240@4 {
|
|
reg = <0x4>;
|
|
};
|
|
mv88e1240@5 {
|
|
reg = <0x5>;
|
|
};
|
|
mv88e1240@6 {
|
|
reg = <0x6>;
|
|
};
|
|
mv88e1240@7 {
|
|
reg = <0x7>;
|
|
};
|
|
mv88e1240@8 {
|
|
reg = <0x8>;
|
|
};
|
|
mv88e1240@9 {
|
|
reg = <0x9>;
|
|
};
|
|
mv88e1240@a {
|
|
reg = <0xa>;
|
|
};
|
|
mv88e1240@b {
|
|
reg = <0xb>;
|
|
};
|
|
mv88e1240@c {
|
|
reg = <0xc>;
|
|
};
|
|
mv88e1240@d {
|
|
reg = <0xd>;
|
|
};
|
|
mv88e1240@e {
|
|
reg = <0xe>;
|
|
};
|
|
mv88e1240@f {
|
|
reg = <0xf>;
|
|
};
|
|
mv88e1240@10 {
|
|
reg = <0x10>;
|
|
};
|
|
mv88e1240@11 {
|
|
reg = <0x11>;
|
|
};
|
|
mv88e1240@12 {
|
|
reg = <0x12>;
|
|
};
|
|
mv88e1240@13 {
|
|
reg = <0x13>;
|
|
};
|
|
mv88e1240@14 {
|
|
reg = <0x14>;
|
|
};
|
|
mv88e1240@15 {
|
|
reg = <0x15>;
|
|
};
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
finder_led {
|
|
label = "finder-led";
|
|
gpios = <&PCA22 25 0>;
|
|
};
|
|
|
|
status_led {
|
|
label = "status-led";
|
|
gpios = <&gpio0 29 0>;
|
|
};
|
|
};
|
|
};
|