mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-04 18:41:03 +00:00
0d98f6de62
This documentation has been taken from Linux commit 3d7db0f11c7a ("spi: dw:
Refactor mid_spi_dma_setup() to separate DMA and IRQ config"), immediately
before the file was deleted and replaced with a yaml version. Additional
compatible strings from newer versions have been added, as well as a few
U-Boot-specific ones.
Signed-off-by: Sean Anderson <seanga2@gmail.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
56 lines
2 KiB
Text
56 lines
2 KiB
Text
Synopsys DesignWare AMBA 2.0 Synchronous Serial Interface
|
|
and Synopsys DesignWare High Performance Synchronous Serial Interface
|
|
|
|
Required properties:
|
|
- compatible : One of
|
|
"altr,socfpga-spi",
|
|
"altr,socfpga-arria10-spi",
|
|
"canaan,kendryte-k210-spi",
|
|
"canaan,kendryte-k210-ssi",
|
|
"intel,stratix10-spi",
|
|
"intel,agilex-spi",
|
|
"mscc,ocelot-spi",
|
|
or "mscc,jaguar2-spi";
|
|
and one of
|
|
"snps,dw-apb-ssi-3.20a",
|
|
"snps,dw-apb-ssi-3.22a",
|
|
"snps,dw-apb-ssi-3.23",
|
|
"snps,dw-apb-ssi-4.00a",
|
|
"snps,dw-apb-ssi-4.01",
|
|
or "snps,dwc-ssi-1.01a".
|
|
"snps,dw-apb-ssi" may also be used, but is deprecated in favor of specific
|
|
version strings.
|
|
- reg : The register base for the controller. For "mscc,<soc>-spi", a second
|
|
register set is required (named ICPU_CFG:SPI_MST)
|
|
- #address-cells : <1>, as required by generic SPI binding.
|
|
- #size-cells : <0>, also as required by generic SPI binding.
|
|
- clocks : phandles for the clocks, see the description of clock-names below.
|
|
The phandle for the "ssi_clk" is required. The phandle for the "pclk" clock
|
|
is optional. If a single clock is specified but no clock-name, it is the
|
|
"ssi_clk" clock. If both clocks are listed, the "ssi_clk" must be first.
|
|
|
|
Optional properties:
|
|
- clock-names : Contains the names of the clocks:
|
|
"ssi_clk", for the core clock used to generate the external SPI clock.
|
|
"pclk", the interface clock, required for register access.
|
|
- cs-gpios : Specifies the gpio pins to be used for chipselects.
|
|
- num-cs : The number of chipselects. If omitted, this will default to 4.
|
|
- reg-io-width : The I/O register width (in bytes) implemented by this
|
|
device. Supported values are 2 or 4 (the default).
|
|
|
|
Child nodes as per the generic SPI binding.
|
|
|
|
Example:
|
|
|
|
spi@fff00000 {
|
|
compatible = "altr,socfpga-arria10-spi",
|
|
"snps,dw-apb-ssi-4.00a", "snps,dw-apb-ssi";
|
|
reg = <0xfff00000 0x1000>;
|
|
interrupts = <0 154 4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
clocks = <&spi_m_clk>;
|
|
num-cs = <2>;
|
|
cs-gpios = <&gpio0 13 0>,
|
|
<&gpio0 14 0>;
|
|
};
|