mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
bdb5df1a06
The driver currently calculates the end address of cache flush operation for the DMA descriptors by adding cacheline size to the start address of the last DMA descriptor. This is not safe, as the cacheline size may be, in some unlikely cases, smaller than the DMA descriptor size. Replace the addition with roundup() applied on the end address of the last DMA descriptor to round it up to the nearest cacheline size multiple. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Jaehoon Chung <jh80.chung@samsung.com> Cc: Simon Glass <sjg@chromium.org>
606 lines
14 KiB
C
606 lines
14 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* (C) Copyright 2012 SAMSUNG Electronics
|
|
* Jaehoon Chung <jh80.chung@samsung.com>
|
|
* Rajeshawari Shinde <rajeshwari.s@samsung.com>
|
|
*/
|
|
|
|
#include <bouncebuf.h>
|
|
#include <common.h>
|
|
#include <errno.h>
|
|
#include <malloc.h>
|
|
#include <memalign.h>
|
|
#include <mmc.h>
|
|
#include <dwmmc.h>
|
|
#include <wait_bit.h>
|
|
|
|
#define PAGE_SIZE 4096
|
|
|
|
static int dwmci_wait_reset(struct dwmci_host *host, u32 value)
|
|
{
|
|
unsigned long timeout = 1000;
|
|
u32 ctrl;
|
|
|
|
dwmci_writel(host, DWMCI_CTRL, value);
|
|
|
|
while (timeout--) {
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
if (!(ctrl & DWMCI_RESET_ALL))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void dwmci_set_idma_desc(struct dwmci_idmac *idmac,
|
|
u32 desc0, u32 desc1, u32 desc2)
|
|
{
|
|
struct dwmci_idmac *desc = idmac;
|
|
|
|
desc->flags = desc0;
|
|
desc->cnt = desc1;
|
|
desc->addr = desc2;
|
|
desc->next_addr = (ulong)desc + sizeof(struct dwmci_idmac);
|
|
}
|
|
|
|
static void dwmci_prepare_data(struct dwmci_host *host,
|
|
struct mmc_data *data,
|
|
struct dwmci_idmac *cur_idmac,
|
|
void *bounce_buffer)
|
|
{
|
|
unsigned long ctrl;
|
|
unsigned int i = 0, flags, cnt, blk_cnt;
|
|
ulong data_start, data_end;
|
|
|
|
|
|
blk_cnt = data->blocks;
|
|
|
|
dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
|
|
|
|
/* Clear IDMAC interrupt */
|
|
dwmci_writel(host, DWMCI_IDSTS, 0xFFFFFFFF);
|
|
|
|
data_start = (ulong)cur_idmac;
|
|
dwmci_writel(host, DWMCI_DBADDR, (ulong)cur_idmac);
|
|
|
|
do {
|
|
flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH ;
|
|
flags |= (i == 0) ? DWMCI_IDMAC_FS : 0;
|
|
if (blk_cnt <= 8) {
|
|
flags |= DWMCI_IDMAC_LD;
|
|
cnt = data->blocksize * blk_cnt;
|
|
} else
|
|
cnt = data->blocksize * 8;
|
|
|
|
dwmci_set_idma_desc(cur_idmac, flags, cnt,
|
|
(ulong)bounce_buffer + (i * PAGE_SIZE));
|
|
|
|
cur_idmac++;
|
|
if (blk_cnt <= 8)
|
|
break;
|
|
blk_cnt -= 8;
|
|
i++;
|
|
} while(1);
|
|
|
|
data_end = (ulong)cur_idmac;
|
|
flush_dcache_range(data_start, roundup(data_end, ARCH_DMA_MINALIGN));
|
|
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
ctrl |= DWMCI_IDMAC_EN | DWMCI_DMA_EN;
|
|
dwmci_writel(host, DWMCI_CTRL, ctrl);
|
|
|
|
ctrl = dwmci_readl(host, DWMCI_BMOD);
|
|
ctrl |= DWMCI_BMOD_IDMAC_FB | DWMCI_BMOD_IDMAC_EN;
|
|
dwmci_writel(host, DWMCI_BMOD, ctrl);
|
|
|
|
dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
|
|
dwmci_writel(host, DWMCI_BYTCNT, data->blocksize * data->blocks);
|
|
}
|
|
|
|
static int dwmci_fifo_ready(struct dwmci_host *host, u32 bit, u32 *len)
|
|
{
|
|
u32 timeout = 20000;
|
|
|
|
*len = dwmci_readl(host, DWMCI_STATUS);
|
|
while (--timeout && (*len & bit)) {
|
|
udelay(200);
|
|
*len = dwmci_readl(host, DWMCI_STATUS);
|
|
}
|
|
|
|
if (!timeout) {
|
|
debug("%s: FIFO underflow timeout\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static unsigned int dwmci_get_timeout(struct mmc *mmc, const unsigned int size)
|
|
{
|
|
unsigned int timeout;
|
|
|
|
timeout = size * 8 * 1000; /* counting in bits and msec */
|
|
timeout *= 2; /* wait twice as long */
|
|
timeout /= mmc->clock;
|
|
timeout /= mmc->bus_width;
|
|
timeout /= mmc->ddr_mode ? 2 : 1;
|
|
timeout = (timeout < 1000) ? 1000 : timeout;
|
|
|
|
return timeout;
|
|
}
|
|
|
|
static int dwmci_data_transfer(struct dwmci_host *host, struct mmc_data *data)
|
|
{
|
|
struct mmc *mmc = host->mmc;
|
|
int ret = 0;
|
|
u32 timeout, mask, size, i, len = 0;
|
|
u32 *buf = NULL;
|
|
ulong start = get_timer(0);
|
|
u32 fifo_depth = (((host->fifoth_val & RX_WMARK_MASK) >>
|
|
RX_WMARK_SHIFT) + 1) * 2;
|
|
|
|
size = data->blocksize * data->blocks;
|
|
if (data->flags == MMC_DATA_READ)
|
|
buf = (unsigned int *)data->dest;
|
|
else
|
|
buf = (unsigned int *)data->src;
|
|
|
|
timeout = dwmci_get_timeout(mmc, size);
|
|
|
|
size /= 4;
|
|
|
|
for (;;) {
|
|
mask = dwmci_readl(host, DWMCI_RINTSTS);
|
|
/* Error during data transfer. */
|
|
if (mask & (DWMCI_DATA_ERR | DWMCI_DATA_TOUT)) {
|
|
debug("%s: DATA ERROR!\n", __func__);
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
if (host->fifo_mode && size) {
|
|
len = 0;
|
|
if (data->flags == MMC_DATA_READ &&
|
|
(mask & DWMCI_INTMSK_RXDR)) {
|
|
while (size) {
|
|
ret = dwmci_fifo_ready(host,
|
|
DWMCI_FIFO_EMPTY,
|
|
&len);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
len = (len >> DWMCI_FIFO_SHIFT) &
|
|
DWMCI_FIFO_MASK;
|
|
len = min(size, len);
|
|
for (i = 0; i < len; i++)
|
|
*buf++ =
|
|
dwmci_readl(host, DWMCI_DATA);
|
|
size = size > len ? (size - len) : 0;
|
|
}
|
|
dwmci_writel(host, DWMCI_RINTSTS,
|
|
DWMCI_INTMSK_RXDR);
|
|
} else if (data->flags == MMC_DATA_WRITE &&
|
|
(mask & DWMCI_INTMSK_TXDR)) {
|
|
while (size) {
|
|
ret = dwmci_fifo_ready(host,
|
|
DWMCI_FIFO_FULL,
|
|
&len);
|
|
if (ret < 0)
|
|
break;
|
|
|
|
len = fifo_depth - ((len >>
|
|
DWMCI_FIFO_SHIFT) &
|
|
DWMCI_FIFO_MASK);
|
|
len = min(size, len);
|
|
for (i = 0; i < len; i++)
|
|
dwmci_writel(host, DWMCI_DATA,
|
|
*buf++);
|
|
size = size > len ? (size - len) : 0;
|
|
}
|
|
dwmci_writel(host, DWMCI_RINTSTS,
|
|
DWMCI_INTMSK_TXDR);
|
|
}
|
|
}
|
|
|
|
/* Data arrived correctly. */
|
|
if (mask & DWMCI_INTMSK_DTO) {
|
|
ret = 0;
|
|
break;
|
|
}
|
|
|
|
/* Check for timeout. */
|
|
if (get_timer(start) > timeout) {
|
|
debug("%s: Timeout waiting for data!\n",
|
|
__func__);
|
|
ret = -ETIMEDOUT;
|
|
break;
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, mask);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwmci_set_transfer_mode(struct dwmci_host *host,
|
|
struct mmc_data *data)
|
|
{
|
|
unsigned long mode;
|
|
|
|
mode = DWMCI_CMD_DATA_EXP;
|
|
if (data->flags & MMC_DATA_WRITE)
|
|
mode |= DWMCI_CMD_RW;
|
|
|
|
return mode;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
static int dwmci_send_cmd(struct udevice *dev, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
#else
|
|
static int dwmci_send_cmd(struct mmc *mmc, struct mmc_cmd *cmd,
|
|
struct mmc_data *data)
|
|
{
|
|
#endif
|
|
struct dwmci_host *host = mmc->priv;
|
|
ALLOC_CACHE_ALIGN_BUFFER(struct dwmci_idmac, cur_idmac,
|
|
data ? DIV_ROUND_UP(data->blocks, 8) : 0);
|
|
int ret = 0, flags = 0, i;
|
|
unsigned int timeout = 500;
|
|
u32 retry = 100000;
|
|
u32 mask, ctrl;
|
|
ulong start = get_timer(0);
|
|
struct bounce_buffer bbstate;
|
|
|
|
while (dwmci_readl(host, DWMCI_STATUS) & DWMCI_BUSY) {
|
|
if (get_timer(start) > timeout) {
|
|
debug("%s: Timeout on data busy\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL);
|
|
|
|
if (data) {
|
|
if (host->fifo_mode) {
|
|
dwmci_writel(host, DWMCI_BLKSIZ, data->blocksize);
|
|
dwmci_writel(host, DWMCI_BYTCNT,
|
|
data->blocksize * data->blocks);
|
|
dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET);
|
|
} else {
|
|
if (data->flags == MMC_DATA_READ) {
|
|
ret = bounce_buffer_start(&bbstate,
|
|
(void*)data->dest,
|
|
data->blocksize *
|
|
data->blocks, GEN_BB_WRITE);
|
|
} else {
|
|
ret = bounce_buffer_start(&bbstate,
|
|
(void*)data->src,
|
|
data->blocksize *
|
|
data->blocks, GEN_BB_READ);
|
|
}
|
|
|
|
if (ret)
|
|
return ret;
|
|
|
|
dwmci_prepare_data(host, data, cur_idmac,
|
|
bbstate.bounce_buffer);
|
|
}
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_CMDARG, cmd->cmdarg);
|
|
|
|
if (data)
|
|
flags = dwmci_set_transfer_mode(host, data);
|
|
|
|
if ((cmd->resp_type & MMC_RSP_136) && (cmd->resp_type & MMC_RSP_BUSY))
|
|
return -1;
|
|
|
|
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
|
|
flags |= DWMCI_CMD_ABORT_STOP;
|
|
else
|
|
flags |= DWMCI_CMD_PRV_DAT_WAIT;
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
flags |= DWMCI_CMD_RESP_EXP;
|
|
if (cmd->resp_type & MMC_RSP_136)
|
|
flags |= DWMCI_CMD_RESP_LENGTH;
|
|
}
|
|
|
|
if (cmd->resp_type & MMC_RSP_CRC)
|
|
flags |= DWMCI_CMD_CHECK_CRC;
|
|
|
|
flags |= (cmd->cmdidx | DWMCI_CMD_START | DWMCI_CMD_USE_HOLD_REG);
|
|
|
|
debug("Sending CMD%d\n",cmd->cmdidx);
|
|
|
|
dwmci_writel(host, DWMCI_CMD, flags);
|
|
|
|
for (i = 0; i < retry; i++) {
|
|
mask = dwmci_readl(host, DWMCI_RINTSTS);
|
|
if (mask & DWMCI_INTMSK_CDONE) {
|
|
if (!data)
|
|
dwmci_writel(host, DWMCI_RINTSTS, mask);
|
|
break;
|
|
}
|
|
}
|
|
|
|
if (i == retry) {
|
|
debug("%s: Timeout.\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
if (mask & DWMCI_INTMSK_RTO) {
|
|
/*
|
|
* Timeout here is not necessarily fatal. (e)MMC cards
|
|
* will splat here when they receive CMD55 as they do
|
|
* not support this command and that is exactly the way
|
|
* to tell them apart from SD cards. Thus, this output
|
|
* below shall be debug(). eMMC cards also do not favor
|
|
* CMD8, please keep that in mind.
|
|
*/
|
|
debug("%s: Response Timeout.\n", __func__);
|
|
return -ETIMEDOUT;
|
|
} else if (mask & DWMCI_INTMSK_RE) {
|
|
debug("%s: Response Error.\n", __func__);
|
|
return -EIO;
|
|
} else if ((cmd->resp_type & MMC_RSP_CRC) &&
|
|
(mask & DWMCI_INTMSK_RCRC)) {
|
|
debug("%s: Response CRC Error.\n", __func__);
|
|
return -EIO;
|
|
}
|
|
|
|
|
|
if (cmd->resp_type & MMC_RSP_PRESENT) {
|
|
if (cmd->resp_type & MMC_RSP_136) {
|
|
cmd->response[0] = dwmci_readl(host, DWMCI_RESP3);
|
|
cmd->response[1] = dwmci_readl(host, DWMCI_RESP2);
|
|
cmd->response[2] = dwmci_readl(host, DWMCI_RESP1);
|
|
cmd->response[3] = dwmci_readl(host, DWMCI_RESP0);
|
|
} else {
|
|
cmd->response[0] = dwmci_readl(host, DWMCI_RESP0);
|
|
}
|
|
}
|
|
|
|
if (data) {
|
|
ret = dwmci_data_transfer(host, data);
|
|
|
|
/* only dma mode need it */
|
|
if (!host->fifo_mode) {
|
|
if (data->flags == MMC_DATA_READ)
|
|
mask = DWMCI_IDINTEN_RI;
|
|
else
|
|
mask = DWMCI_IDINTEN_TI;
|
|
ret = wait_for_bit_le32(host->ioaddr + DWMCI_IDSTS,
|
|
mask, true, 1000, false);
|
|
if (ret)
|
|
debug("%s: DWMCI_IDINTEN mask 0x%x timeout.\n",
|
|
__func__, mask);
|
|
/* clear interrupts */
|
|
dwmci_writel(host, DWMCI_IDSTS, DWMCI_IDINTEN_MASK);
|
|
|
|
ctrl = dwmci_readl(host, DWMCI_CTRL);
|
|
ctrl &= ~(DWMCI_DMA_EN);
|
|
dwmci_writel(host, DWMCI_CTRL, ctrl);
|
|
bounce_buffer_stop(&bbstate);
|
|
}
|
|
}
|
|
|
|
udelay(100);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int dwmci_setup_bus(struct dwmci_host *host, u32 freq)
|
|
{
|
|
u32 div, status;
|
|
int timeout = 10000;
|
|
unsigned long sclk;
|
|
|
|
if ((freq == host->clock) || (freq == 0))
|
|
return 0;
|
|
/*
|
|
* If host->get_mmc_clk isn't defined,
|
|
* then assume that host->bus_hz is source clock value.
|
|
* host->bus_hz should be set by user.
|
|
*/
|
|
if (host->get_mmc_clk)
|
|
sclk = host->get_mmc_clk(host, freq);
|
|
else if (host->bus_hz)
|
|
sclk = host->bus_hz;
|
|
else {
|
|
debug("%s: Didn't get source clock value.\n", __func__);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (sclk == freq)
|
|
div = 0; /* bypass mode */
|
|
else
|
|
div = DIV_ROUND_UP(sclk, 2 * freq);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, 0);
|
|
dwmci_writel(host, DWMCI_CLKSRC, 0);
|
|
|
|
dwmci_writel(host, DWMCI_CLKDIV, div);
|
|
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
|
|
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
|
|
|
|
do {
|
|
status = dwmci_readl(host, DWMCI_CMD);
|
|
if (timeout-- < 0) {
|
|
debug("%s: Timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (status & DWMCI_CMD_START);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, DWMCI_CLKEN_ENABLE |
|
|
DWMCI_CLKEN_LOW_PWR);
|
|
|
|
dwmci_writel(host, DWMCI_CMD, DWMCI_CMD_PRV_DAT_WAIT |
|
|
DWMCI_CMD_UPD_CLK | DWMCI_CMD_START);
|
|
|
|
timeout = 10000;
|
|
do {
|
|
status = dwmci_readl(host, DWMCI_CMD);
|
|
if (timeout-- < 0) {
|
|
debug("%s: Timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
} while (status & DWMCI_CMD_START);
|
|
|
|
host->clock = freq;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
static int dwmci_set_ios(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
#else
|
|
static int dwmci_set_ios(struct mmc *mmc)
|
|
{
|
|
#endif
|
|
struct dwmci_host *host = (struct dwmci_host *)mmc->priv;
|
|
u32 ctype, regs;
|
|
|
|
debug("Buswidth = %d, clock: %d\n", mmc->bus_width, mmc->clock);
|
|
|
|
dwmci_setup_bus(host, mmc->clock);
|
|
switch (mmc->bus_width) {
|
|
case 8:
|
|
ctype = DWMCI_CTYPE_8BIT;
|
|
break;
|
|
case 4:
|
|
ctype = DWMCI_CTYPE_4BIT;
|
|
break;
|
|
default:
|
|
ctype = DWMCI_CTYPE_1BIT;
|
|
break;
|
|
}
|
|
|
|
dwmci_writel(host, DWMCI_CTYPE, ctype);
|
|
|
|
regs = dwmci_readl(host, DWMCI_UHS_REG);
|
|
if (mmc->ddr_mode)
|
|
regs |= DWMCI_DDR_MODE;
|
|
else
|
|
regs &= ~DWMCI_DDR_MODE;
|
|
|
|
dwmci_writel(host, DWMCI_UHS_REG, regs);
|
|
|
|
if (host->clksel)
|
|
host->clksel(host);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int dwmci_init(struct mmc *mmc)
|
|
{
|
|
struct dwmci_host *host = mmc->priv;
|
|
|
|
if (host->board_init)
|
|
host->board_init(host);
|
|
|
|
dwmci_writel(host, DWMCI_PWREN, 1);
|
|
|
|
if (!dwmci_wait_reset(host, DWMCI_RESET_ALL)) {
|
|
debug("%s[%d] Fail-reset!!\n", __func__, __LINE__);
|
|
return -EIO;
|
|
}
|
|
|
|
/* Enumerate at 400KHz */
|
|
dwmci_setup_bus(host, mmc->cfg->f_min);
|
|
|
|
dwmci_writel(host, DWMCI_RINTSTS, 0xFFFFFFFF);
|
|
dwmci_writel(host, DWMCI_INTMASK, 0);
|
|
|
|
dwmci_writel(host, DWMCI_TMOUT, 0xFFFFFFFF);
|
|
|
|
dwmci_writel(host, DWMCI_IDINTEN, 0);
|
|
dwmci_writel(host, DWMCI_BMOD, 1);
|
|
|
|
if (!host->fifoth_val) {
|
|
uint32_t fifo_size;
|
|
|
|
fifo_size = dwmci_readl(host, DWMCI_FIFOTH);
|
|
fifo_size = ((fifo_size & RX_WMARK_MASK) >> RX_WMARK_SHIFT) + 1;
|
|
host->fifoth_val = MSIZE(0x2) | RX_WMARK(fifo_size / 2 - 1) |
|
|
TX_WMARK(fifo_size / 2);
|
|
}
|
|
dwmci_writel(host, DWMCI_FIFOTH, host->fifoth_val);
|
|
|
|
dwmci_writel(host, DWMCI_CLKENA, 0);
|
|
dwmci_writel(host, DWMCI_CLKSRC, 0);
|
|
|
|
if (!host->fifo_mode)
|
|
dwmci_writel(host, DWMCI_IDINTEN, DWMCI_IDINTEN_MASK);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_DM_MMC
|
|
int dwmci_probe(struct udevice *dev)
|
|
{
|
|
struct mmc *mmc = mmc_get_mmc_dev(dev);
|
|
|
|
return dwmci_init(mmc);
|
|
}
|
|
|
|
const struct dm_mmc_ops dm_dwmci_ops = {
|
|
.send_cmd = dwmci_send_cmd,
|
|
.set_ios = dwmci_set_ios,
|
|
};
|
|
|
|
#else
|
|
static const struct mmc_ops dwmci_ops = {
|
|
.send_cmd = dwmci_send_cmd,
|
|
.set_ios = dwmci_set_ios,
|
|
.init = dwmci_init,
|
|
};
|
|
#endif
|
|
|
|
void dwmci_setup_cfg(struct mmc_config *cfg, struct dwmci_host *host,
|
|
u32 max_clk, u32 min_clk)
|
|
{
|
|
cfg->name = host->name;
|
|
#ifndef CONFIG_DM_MMC
|
|
cfg->ops = &dwmci_ops;
|
|
#endif
|
|
cfg->f_min = min_clk;
|
|
cfg->f_max = max_clk;
|
|
|
|
cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34 | MMC_VDD_165_195;
|
|
|
|
cfg->host_caps = host->caps;
|
|
|
|
if (host->buswidth == 8) {
|
|
cfg->host_caps |= MMC_MODE_8BIT;
|
|
cfg->host_caps &= ~MMC_MODE_4BIT;
|
|
} else {
|
|
cfg->host_caps |= MMC_MODE_4BIT;
|
|
cfg->host_caps &= ~MMC_MODE_8BIT;
|
|
}
|
|
cfg->host_caps |= MMC_MODE_HS | MMC_MODE_HS_52MHz;
|
|
|
|
cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
|
|
}
|
|
|
|
#ifdef CONFIG_BLK
|
|
int dwmci_bind(struct udevice *dev, struct mmc *mmc, struct mmc_config *cfg)
|
|
{
|
|
return mmc_bind(dev, mmc, cfg);
|
|
}
|
|
#else
|
|
int add_dwmci(struct dwmci_host *host, u32 max_clk, u32 min_clk)
|
|
{
|
|
dwmci_setup_cfg(&host->cfg, host, max_clk, min_clk);
|
|
|
|
host->mmc = mmc_create(&host->cfg, host);
|
|
if (host->mmc == NULL)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|