mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-09 04:43:29 +00:00
f232950f82
Remove platform CONFIG_SYS_HZ definition for configs a-z*. Signed-off-by: Rob Herring <rob.herring@calxeda.com>
434 lines
17 KiB
C
434 lines
17 KiB
C
/*
|
|
* (C) Copyright 2006
|
|
* Stefan Roese, DENX Software Engineering, sr@denx.de.
|
|
*
|
|
* Based on original work by
|
|
* Roel Loeffen, (C) Copyright 2006 Prodrive B.V.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/************************************************************************
|
|
* p3mx.h - configuration for Prodrive P3M750 & P3M7448 boards
|
|
*
|
|
* The defines:
|
|
* CONFIG_P3M750 or
|
|
* CONFIG_P3M7448
|
|
* are written into include/config.h by the "make xxx_config" command
|
|
***********************************************************************/
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* High Level Configuration Options
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_P3Mx /* used for both board versions */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xfff00000
|
|
|
|
#if defined (CONFIG_P3M750)
|
|
#define CONFIG_750FX /* 750GL/GX/FX */
|
|
#define CONFIG_HIGH_BATS /* High BATs supported */
|
|
#define CONFIG_SYS_BOARD_NAME "P3M750"
|
|
#define CONFIG_SYS_BUS_CLK 100000000
|
|
#define CONFIG_SYS_TCLK 100000000
|
|
#elif defined (CONFIG_P3M7448)
|
|
#define CONFIG_74xx
|
|
#define CONFIG_SYS_BOARD_NAME "P3M7448"
|
|
#define CONFIG_SYS_BUS_CLK 133333333
|
|
#define CONFIG_SYS_TCLK 133333333
|
|
#endif
|
|
#define CONFIG_SYS_GT_DUAL_CPU /* also for JTAG even with one cpu */
|
|
|
|
/* which initialization functions to call for this board */
|
|
#define CONFIG_SYS_BOARD_ASM_INIT 1
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_early_init_f */
|
|
#define CONFIG_MISC_INIT_R 1 /* Call misc_init_r() */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Base addresses -- Note these are effective addresses where the
|
|
* actual resources get mapped (not physical addresses)
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#ifdef CONFIG_P3M750
|
|
#define CONFIG_SYS_SDRAM1_BASE 0x10000000 /* each 256 MByte */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#if defined (CONFIG_P3M750)
|
|
#define CONFIG_SYS_FLASH_BASE 0xff800000 /* start of flash banks */
|
|
#define CONFIG_SYS_BOOT_SIZE _8M /* boot flash */
|
|
#elif defined (CONFIG_P3M7448)
|
|
#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of flash banks */
|
|
#define CONFIG_SYS_BOOT_SIZE _16M /* boot flash */
|
|
#endif
|
|
#define CONFIG_SYS_BOOT_SPACE CONFIG_SYS_FLASH_BASE /* BOOT_CS0 flash 0 */
|
|
#define CONFIG_SYS_MONITOR_BASE 0xfff00000
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
|
|
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
|
|
#define CONFIG_SYS_MISC_REGION_BASE 0xf0000000
|
|
|
|
#define CONFIG_SYS_DFL_GT_REGS 0xf1000000 /* boot time GT_REGS */
|
|
#define CONFIG_SYS_GT_REGS 0xf1000000 /* GT Registers are mapped here */
|
|
#define CONFIG_SYS_INT_SRAM_BASE 0x42000000 /* GT offers 256k internal SRAM */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Initial RAM & stack pointer (placed in internal SRAM)
|
|
*----------------------------------------------------------------------*/
|
|
/*
|
|
* When locking data in cache you should point the CONFIG_SYS_INIT_RAM_ADDRESS
|
|
* To an unused memory region. The stack will remain in cache until RAM
|
|
* is initialized
|
|
*/
|
|
#undef CONFIG_SYS_INIT_RAM_LOCK
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x42000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Serial Port
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_MPSC /* MV64460 Serial */
|
|
#define CONFIG_MPSC_PORT 0
|
|
#define CONFIG_BAUDRATE 115200 /* console baudrate */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Ethernet
|
|
*----------------------------------------------------------------------*/
|
|
/* Change the default ethernet port, use this define (options: 0, 1, 2) */
|
|
#define CONFIG_SYS_ETH_PORT ETH_0
|
|
#define MV_ETH_DEVS 2
|
|
#define CONFIG_PHY_RESET 1 /* reset phy upon startup */
|
|
#define CONFIG_PHY_GIGE 1 /* Include GbE speed/duplex detection */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH related
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_FLASH_CFI /* The flash is CFI compatible */
|
|
#define CONFIG_FLASH_CFI_DRIVER /* Use common CFI driver */
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max number of sectors on one chip */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1 /* use buffered writes (20x faster) */
|
|
#define CONFIG_SYS_FLASH_PROTECTION 1 /* use hardware flash protection */
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO /* print 'E' for empty sector on flinfo */
|
|
|
|
#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
|
|
#if defined (CONFIG_P3M750)
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000 /* one sector (1 device) */
|
|
#elif defined (CONFIG_P3M7448)
|
|
#define CONFIG_ENV_SECT_SIZE 0x40000 /* two sectors (2 devices parallel */
|
|
#endif
|
|
#define CONFIG_ENV_SIZE 0x2000 /* Total Size of Environment Sector */
|
|
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* DDR SDRAM
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_MV64460_ECC
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* I2C speed default */
|
|
|
|
/* I2C RTC */
|
|
#define CONFIG_RTC_M41T11 1
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
#define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* play along with linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI stuff
|
|
*----------------------------------------------------------------------*/
|
|
#define PCI_HOST_ADAPTER 0 /* configure ar pci adapter */
|
|
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
|
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
|
|
|
#undef CONFIG_PCI /* include pci support */
|
|
#ifdef CONFIG_PCI
|
|
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* select pci host function */
|
|
#define CONFIG_PCI_PNP /* do pci plug-and-play */
|
|
#define CONFIG_PCI_SCAN_SHOW /* show devices on bus */
|
|
#endif /* CONFIG_PCI */
|
|
|
|
/* PCI MEMORY MAP section */
|
|
#define CONFIG_SYS_PCI0_MEM_BASE 0x80000000
|
|
#define CONFIG_SYS_PCI0_MEM_SIZE _128M
|
|
#define CONFIG_SYS_PCI1_MEM_BASE 0x88000000
|
|
#define CONFIG_SYS_PCI1_MEM_SIZE _128M
|
|
|
|
#define CONFIG_SYS_PCI0_0_MEM_SPACE (CONFIG_SYS_PCI0_MEM_BASE)
|
|
#define CONFIG_SYS_PCI1_0_MEM_SPACE (CONFIG_SYS_PCI1_MEM_BASE)
|
|
|
|
/* PCI I/O MAP section */
|
|
#define CONFIG_SYS_PCI0_IO_BASE 0xfa000000
|
|
#define CONFIG_SYS_PCI0_IO_SIZE _16M
|
|
#define CONFIG_SYS_PCI1_IO_BASE 0xfb000000
|
|
#define CONFIG_SYS_PCI1_IO_SIZE _16M
|
|
|
|
#define CONFIG_SYS_PCI0_IO_SPACE (CONFIG_SYS_PCI0_IO_BASE)
|
|
#define CONFIG_SYS_PCI0_IO_SPACE_PCI 0x00000000
|
|
#define CONFIG_SYS_PCI1_IO_SPACE (CONFIG_SYS_PCI1_IO_BASE)
|
|
#define CONFIG_SYS_PCI1_IO_SPACE_PCI 0x00000000
|
|
|
|
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS (CONFIG_SYS_PCI0_IO_BASE)
|
|
#define CONFIG_SYS_PCI_IDSEL 0x30
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
#define CONFIG_EXTRA_ENV_SETTINGS_COMMON \
|
|
"netdev=eth0\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
|
|
"flash_nfs=run nfsargs addip addtty;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"flash_self=run ramargs addip addtty;" \
|
|
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;" \
|
|
"bootm\0" \
|
|
"rootpath=/opt/eldk/ppc_6xx\0" \
|
|
"u-boot=p3mx/u-boot/u-boot.bin\0" \
|
|
"load=tftp 100000 ${u-boot}\0" \
|
|
"update=protect off fff00000 fff3ffff;era fff00000 fff3ffff;" \
|
|
"cp.b 100000 fff00000 40000;" \
|
|
"setenv filesize;saveenv\0" \
|
|
"upd=run load update\0" \
|
|
"serverip=11.0.0.152\0"
|
|
|
|
#if defined (CONFIG_P3M750)
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_EXTRA_ENV_SETTINGS_COMMON \
|
|
"hostname=p3m750\0" \
|
|
"bootfile=/tftpboot/p3mx/vxWorks.st\0" \
|
|
"kernel_addr=fc000000\0" \
|
|
"ramdisk_addr=fc180000\0" \
|
|
"vxfile=p3m750/vxWorks\0" \
|
|
"vxuser=ddg\0" \
|
|
"vxpass=ddg\0" \
|
|
"vxtarget=target\0" \
|
|
"vxflags=0x8\0" \
|
|
"vxargs=setenv bootargs mgi(0,0)host:${vxfile} h=${serverip} " \
|
|
"e=${ipaddr} u=${vxuser} pw=${vxpass} tn=${vxtarget} " \
|
|
"f=${vxflags}\0"
|
|
#elif defined (CONFIG_P3M7448)
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
CONFIG_EXTRA_ENV_SETTINGS_COMMON \
|
|
"hostname=p3m7448\0"
|
|
#endif
|
|
|
|
#if defined (CONFIG_P3M750)
|
|
#define CONFIG_BOOTCOMMAND "tftp;run vxargs;bootvx"
|
|
#elif defined (CONFIG_P3M7448)
|
|
#define CONFIG_BOOTCOMMAND " "
|
|
#endif
|
|
|
|
#define CONFIG_BOOTDELAY 3 /* autoboot after 5 seconds */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_SUBNETMASK
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DIAG
|
|
#define CONFIG_CMD_ELF
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NET
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_CACHE
|
|
#define CONFIG_CMD_SDRAM
|
|
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Miscellaneous configurable options
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_HUSH_PARSER
|
|
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x08000000 /* default load address */
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
|
#define CONFIG_LOOPW 1 /* enable loopw command */
|
|
#define CONFIG_MX_CYCLIC 1 /* enable mdc/mwc commands */
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check for keypress on bootdelay==0 */
|
|
#define CONFIG_VERSION_VARIABLE 1 /* include version env variable */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Marvell MV64460 config settings
|
|
*----------------------------------------------------------------------*/
|
|
/* Reset values for Port behavior (8bit/ 32bit, etc.) only corrected device width */
|
|
#if defined (CONFIG_P3M750)
|
|
#define CONFIG_SYS_BOOT_PAR 0x8FDFF87F /* 16 bit flash, disable burst*/
|
|
#elif defined (CONFIG_P3M7448)
|
|
#define CONFIG_SYS_BOOT_PAR 0x8FEFFFFF /* 32 bit flash, burst enabled */
|
|
#endif
|
|
|
|
/*
|
|
* MPP[0] Serial Port 0 TxD TxD OUT Connected to P14 (buffered)
|
|
* MPP[1] Serial Port 0 RxD RxD IN Connected to P14 (buffered)
|
|
* MPP[2] NC
|
|
* MPP[3] Serial Port 1 TxD TxD OUT Connected to P14 (buffered)
|
|
* MPP[4] PCI Monarch# GPIO IN Connected to P12
|
|
* MPP[5] Serial Port 1 RxD RxD IN Connected to P14 (buffered)
|
|
* MPP[6] PMC Carrier Interrupt 0 Int IN Connected to P14
|
|
* MPP[7] PMC Carrier Interrupt 1 Int IN Connected to P14
|
|
* MPP[8] Reserved Do not use
|
|
* MPP[9] Reserved Do not use
|
|
* MPP[10] Reserved Do not use
|
|
* MPP[11] Reserved Do not use
|
|
* MPP[12] Phy 0 Interrupt Int IN
|
|
* MPP[13] Phy 1 Interrupt Int IN
|
|
* MPP[14] NC
|
|
* MPP[15] NC
|
|
* MPP[16] PCI Interrupt C Int IN Connected to P11
|
|
* MPP[17] PCI Interrupt D Int IN Connected to P11
|
|
* MPP[18] Watchdog NMI# GPIO IN Connected to MPP[24]
|
|
* MPP[19] Watchdog Expired# WDE OUT Connected to rst logic
|
|
* MPP[20] Watchdog Status WD_STS IN Read back of rst by watchdog
|
|
* MPP[21] NC
|
|
* MPP[22] GP LED Green GPIO OUT
|
|
* MPP[23] GP LED Red GPIO OUT
|
|
* MPP[24] Watchdog NMI# Int OUT
|
|
* MPP[25] NC
|
|
* MPP[26] NC
|
|
* MPP[27] PCI Interrupt A Int IN Connected to P11
|
|
* MPP[28] NC
|
|
* MPP[29] PCI Interrupt B Int IN Connected to P11
|
|
* MPP[30] Module reset GPIO OUT Board reset
|
|
* MPP[31] PCI EReady GPIO IN Connected to P12
|
|
*/
|
|
#define CONFIG_SYS_MPP_CONTROL_0 0x00303022
|
|
#define CONFIG_SYS_MPP_CONTROL_1 0x00000000
|
|
#define CONFIG_SYS_MPP_CONTROL_2 0x00004000
|
|
#define CONFIG_SYS_MPP_CONTROL_3 0x00000004
|
|
#define CONFIG_SYS_GPP_LEVEL_CONTROL 0x280730D0
|
|
|
|
/*----------------------------------------------------------------------
|
|
* Initial BAT mappings
|
|
*/
|
|
|
|
/* NOTES:
|
|
* 1) GUARDED and WRITE_THRU not allowed in IBATS
|
|
* 2) CACHEINHIBIT and WRITETHROUGH not allowed together in same BAT
|
|
*/
|
|
/* SDRAM */
|
|
#define CONFIG_SYS_IBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT0U (CONFIG_SYS_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT0L (CONFIG_SYS_SDRAM_BASE | BATL_PP_RW | BATL_GUARDEDSTORAGE | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_DBAT0U CONFIG_SYS_IBAT0U
|
|
|
|
/* init ram */
|
|
#define CONFIG_SYS_IBAT1L (CONFIG_SYS_INIT_RAM_ADDR | BATL_PP_RW | BATL_MEMCOHERENCE)
|
|
#define CONFIG_SYS_IBAT1U (CONFIG_SYS_INIT_RAM_ADDR | BATU_BL_256K | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT1L CONFIG_SYS_IBAT1L
|
|
#define CONFIG_SYS_DBAT1U CONFIG_SYS_IBAT1U
|
|
|
|
/* PCI0, PCI1 in one BAT */
|
|
#define CONFIG_SYS_IBAT2L BATL_NO_ACCESS
|
|
#define CONFIG_SYS_IBAT2U CONFIG_SYS_DBAT2U
|
|
#define CONFIG_SYS_DBAT2L (CONFIG_SYS_PCI0_MEM_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT2U (CONFIG_SYS_PCI0_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
|
|
/* GT regs, bootrom, all the devices, PCI I/O */
|
|
#define CONFIG_SYS_IBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW)
|
|
#define CONFIG_SYS_IBAT3U (CONFIG_SYS_MISC_REGION_BASE | BATU_VS | BATU_VP | BATU_BL_256M)
|
|
#define CONFIG_SYS_DBAT3L (CONFIG_SYS_MISC_REGION_BASE | BATL_CACHEINHIBIT | BATL_PP_RW | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT3U CONFIG_SYS_IBAT3U
|
|
|
|
#define CONFIG_SYS_IBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT4U (CONFIG_SYS_SDRAM1_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT4L (CONFIG_SYS_SDRAM1_BASE | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT4U CONFIG_SYS_IBAT4U
|
|
|
|
/* set rest out of range for Linux !!!!!!!!!!! */
|
|
|
|
/* IBAT5 and DBAT5 */
|
|
#define CONFIG_SYS_IBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT5U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT5L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT5U CONFIG_SYS_IBAT5U
|
|
|
|
/* IBAT6 and DBAT6 */
|
|
#define CONFIG_SYS_IBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT6U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT6L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT6U CONFIG_SYS_IBAT6U
|
|
|
|
/* IBAT7 and DBAT7 */
|
|
#define CONFIG_SYS_IBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT)
|
|
#define CONFIG_SYS_IBAT7U (0x20000000 | BATU_BL_256M | BATU_VS | BATU_VP)
|
|
#define CONFIG_SYS_DBAT7L (0x20000000 | BATL_PP_RW | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
|
|
#define CONFIG_SYS_DBAT7U CONFIG_SYS_IBAT7U
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8<<20) /* Initial Memory map for Linux */
|
|
#define CONFIG_SYS_VXWORKS_MAC_PTR 0x42010000 /* use some memory in SRAM that's not used!!! */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For all MPC74xx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* L2CR setup -- make sure this is right for your board!
|
|
* look in include/mpc74xx.h for the defines used here
|
|
*/
|
|
#define CONFIG_SYS_L2
|
|
|
|
#if defined (CONFIG_750CX) || defined (CONFIG_750FX)
|
|
#define L2_INIT 0
|
|
#else
|
|
#define L2_INIT (L2CR_L2SIZ_2M | L2CR_L2CLK_3 | L2CR_L2RAM_BURST | \
|
|
L2CR_L2OH_5 | L2CR_L2CTL | L2CR_L2WT)
|
|
#endif
|
|
|
|
#define L2_ENABLE (L2_INIT | L2CR_L2E)
|
|
|
|
#ifndef __ASSEMBLY__
|
|
#include <../board/Marvell/include/core.h>
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|