mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 19:10:13 +00:00
8c89443e13
The malloc space is to small to boot, the current uboot 2013.10-rcX, This will fix the startup problems by increasing the mallog space to 4MiB. Signed-off-by: Jens Scharsig (BuS Elektronik) <esw@bus-elektronik.de>
293 lines
9.1 KiB
C
293 lines
9.1 KiB
C
/*
|
|
* Configuation settings for the BuS EB+CPU5283 boards (aka EB+MCF-EV123)
|
|
*
|
|
* (C) Copyright 2005-2009 BuS Elektronik GmbH & Co.KG <esw@bus-elektonik.de>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef _CONFIG_EB_CPU5282_H_
|
|
#define _CONFIG_EB_CPU5282_H_
|
|
|
|
#undef CONFIG_SYS_HALT_BEFOR_RAM_JUMP
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* High Level Configuration Options (easy to change) *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_MCF52x2 /* define processor family */
|
|
#define CONFIG_M5282 /* define processor type */
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
|
|
#define CONFIG_MCFUART
|
|
#define CONFIG_SYS_UART_PORT (0)
|
|
#define CONFIG_BAUDRATE 115200
|
|
|
|
#undef CONFIG_MONITOR_IS_IN_RAM /* starts uboot direct */
|
|
|
|
#define CONFIG_BOOTCOMMAND "printenv"
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Options *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_BOOT_RETRY_TIME -1
|
|
#define CONFIG_RESET_TO_RETRY
|
|
#define CONFIG_SPLASH_SCREEN
|
|
|
|
#define CONFIG_HW_WATCHDOG
|
|
|
|
#define CONFIG_STATUS_LED
|
|
#define CONFIG_BOARD_SPECIFIC_LED
|
|
#define STATUS_LED_ACTIVE 0
|
|
#define STATUS_LED_BIT 0x0008 /* Timer7 GPIO */
|
|
#define STATUS_LED_BOOT 0
|
|
#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
|
|
#define STATUS_LED_STATE STATUS_LED_OFF
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Configuration for environment *
|
|
* Environment is in the second sector of the first 256k of flash *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_ENV_ADDR 0xFF040000
|
|
#define CONFIG_ENV_SECT_SIZE 0x00020000
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMDLINE_EDITING
|
|
#include <config_cmd_default.h>
|
|
|
|
#undef CONFIG_CMD_LOADB
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_LED
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NET
|
|
|
|
#define CONFIG_MCFTMR
|
|
|
|
#define CONFIG_BOOTDELAY 5
|
|
#define CONFIG_SYS_PROMPT "\nEB+CPU5282> "
|
|
#define CONFIG_SYS_LONGHELP 1
|
|
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x20000
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x100000
|
|
#define CONFIG_SYS_MEMTEST_END 0x400000
|
|
/*#define CONFIG_SYS_DRAM_TEST 1 */
|
|
#undef CONFIG_SYS_DRAM_TEST
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Clock and PLL Configuration *
|
|
*----------------------------------------------------------------------*/
|
|
#define CONFIG_SYS_CLK 80000000 /* 8MHz * 8 */
|
|
|
|
/* PLL Configuration: Ext Clock * 8 (see table 9-4 of MCF user manual) */
|
|
|
|
#define CONFIG_SYS_MFD 0x02 /* PLL Multiplication Factor Devider */
|
|
#define CONFIG_SYS_RFD 0x00 /* PLL Reduce Frecuency Devider */
|
|
|
|
/*----------------------------------------------------------------------*
|
|
* Network *
|
|
*----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_MCFFEC
|
|
#define CONFIG_MII 1
|
|
#define CONFIG_MII_INIT 1
|
|
#define CONFIG_SYS_DISCOVER_PHY
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 8
|
|
#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN
|
|
|
|
#define CONFIG_SYS_FEC0_PINMUX 0
|
|
#define CONFIG_SYS_FEC0_MIIBASE CONFIG_SYS_FEC0_IOBASE
|
|
#define MCFFEC_TOUT_LOOP 50000
|
|
|
|
#define CONFIG_OVERWRITE_ETHADDR_ONCE
|
|
|
|
/*-------------------------------------------------------------------------
|
|
* Low Level Configuration Settings
|
|
* (address mappings, register initial values, etc.)
|
|
* You should know what you are doing if you make changes here.
|
|
*-----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_MBAR 0x40000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in DPRAM)
|
|
*-----------------------------------------------------------------------*/
|
|
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0x20000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x10000
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE0 0x00000000
|
|
#define CONFIG_SYS_SDRAM_SIZE0 16 /* SDRAM size in MB */
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_SDRAM_BASE0
|
|
#define CONFIG_SYS_SDRAM_SIZE CONFIG_SYS_SDRAM_SIZE0
|
|
|
|
#define CONFIG_SYS_MONITOR_LEN 0x20000
|
|
#define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024)
|
|
#define CONFIG_SYS_BOOTPARAMS_LEN 64*1024
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization ??
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
|
|
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_CS0_BASE
|
|
#define CONFIG_SYS_INT_FLASH_BASE 0xF0000000
|
|
#define CONFIG_SYS_INT_FLASH_ENABLE 0x21
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 10000000
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
#define CONFIG_SYS_FLASH_SIZE 16*1024*1024
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_16BIT
|
|
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Cache Configuration
|
|
*/
|
|
#define CONFIG_SYS_CACHELINE_SIZE 16
|
|
|
|
#define ICACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 8)
|
|
#define DCACHE_STATUS (CONFIG_SYS_INIT_RAM_ADDR + \
|
|
CONFIG_SYS_INIT_RAM_SIZE - 4)
|
|
#define CONFIG_SYS_ICACHE_INV (CF_CACR_CINV + CF_CACR_DCM)
|
|
#define CONFIG_SYS_CACHE_ACR0 (CONFIG_SYS_SDRAM_BASE | \
|
|
CF_ADDRMASK(CONFIG_SYS_SDRAM_SIZE) | \
|
|
CF_ACR_EN | CF_ACR_SM_ALL)
|
|
#define CONFIG_SYS_CACHE_ICACR (CF_CACR_CENB | CF_CACR_DISD | \
|
|
CF_CACR_CEIB | CF_CACR_DBWE | \
|
|
CF_CACR_EUSP)
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Memory bank definitions
|
|
*/
|
|
|
|
#define CONFIG_SYS_CS0_BASE 0xFF000000
|
|
#define CONFIG_SYS_CS0_CTRL 0x00001980
|
|
#define CONFIG_SYS_CS0_MASK 0x00FF0001
|
|
|
|
#define CONFIG_SYS_CS2_BASE 0xE0000000
|
|
#define CONFIG_SYS_CS2_CTRL 0x00001980
|
|
#define CONFIG_SYS_CS2_MASK 0x000F0001
|
|
|
|
#define CONFIG_SYS_CS3_BASE 0xE0100000
|
|
#define CONFIG_SYS_CS3_CTRL 0x00001980
|
|
#define CONFIG_SYS_CS3_MASK 0x000F0001
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Port configuration
|
|
*/
|
|
#define CONFIG_SYS_PACNT 0x0000000 /* Port A D[31:24] */
|
|
#define CONFIG_SYS_PADDR 0x0000000
|
|
#define CONFIG_SYS_PADAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PBCNT 0x0000000 /* Port B D[23:16] */
|
|
#define CONFIG_SYS_PBDDR 0x0000000
|
|
#define CONFIG_SYS_PBDAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PCCNT 0x0000000 /* Port C D[15:08] */
|
|
#define CONFIG_SYS_PCDDR 0x0000000
|
|
#define CONFIG_SYS_PCDAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PDCNT 0x0000000 /* Port D D[07:00] */
|
|
#define CONFIG_SYS_PCDDR 0x0000000
|
|
#define CONFIG_SYS_PCDAT 0x0000000
|
|
|
|
#define CONFIG_SYS_PASPAR 0x0F0F
|
|
#define CONFIG_SYS_PEHLPAR 0xC0
|
|
#define CONFIG_SYS_PUAPAR 0x0F
|
|
#define CONFIG_SYS_DDRUA 0x05
|
|
#define CONFIG_SYS_PJPAR 0xFF
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* I2C
|
|
*/
|
|
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x00000300
|
|
#define CONFIG_SYS_IMMR CONFIG_SYS_MBAR
|
|
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 100000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0
|
|
|
|
#ifdef CONFIG_CMD_DATE
|
|
#define CONFIG_RTC_DS1338
|
|
#define CONFIG_I2C_RTC_ADDR 0x68
|
|
#endif
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* VIDEO configuration
|
|
*/
|
|
|
|
#define CONFIG_VIDEO
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_VCXK 1
|
|
|
|
#define CONFIG_SYS_VCXK_DEFAULT_LINEALIGN 2
|
|
#define CONFIG_SYS_VCXK_DOUBLEBUFFERED 1
|
|
#define CONFIG_SYS_VCXK_BASE CONFIG_SYS_CS2_BASE
|
|
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PORT MCFGPTB_GPTPORT
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_DDR MCFGPTB_GPTDDR
|
|
#define CONFIG_SYS_VCXK_ACKNOWLEDGE_PIN 0x0001
|
|
|
|
#define CONFIG_SYS_VCXK_ENABLE_PORT MCFGPTB_GPTPORT
|
|
#define CONFIG_SYS_VCXK_ENABLE_DDR MCFGPTB_GPTDDR
|
|
#define CONFIG_SYS_VCXK_ENABLE_PIN 0x0002
|
|
|
|
#define CONFIG_SYS_VCXK_REQUEST_PORT MCFGPTB_GPTPORT
|
|
#define CONFIG_SYS_VCXK_REQUEST_DDR MCFGPTB_GPTDDR
|
|
#define CONFIG_SYS_VCXK_REQUEST_PIN 0x0004
|
|
|
|
#define CONFIG_SYS_VCXK_INVERT_PORT MCFGPIO_PORTE
|
|
#define CONFIG_SYS_VCXK_INVERT_DDR MCFGPIO_DDRE
|
|
#define CONFIG_SYS_VCXK_INVERT_PIN MCFGPIO_PORT2
|
|
|
|
#endif /* CONFIG_VIDEO */
|
|
#endif /* _CONFIG_M5282EVB_H */
|
|
/*---------------------------------------------------------------------*/
|