mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-05 11:00:15 +00:00
b2a6dfe4f8
We do not have to define CONFIG_MPC5xxx in board config headers (and start.S) because it is defined in arch/powerpc/cpu/mpc5xxx/config.mk. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
743 lines
23 KiB
C
743 lines
23 KiB
C
/*
|
|
* (C) Copyright 2003-2005
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* (C) Copyright 2004-2006
|
|
* Martin Krause, TQ-Systems GmbH, martin.krause@tqs.de
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
*/
|
|
|
|
#define CONFIG_MPC5200 1 /* This is an MPC5200 CPU */
|
|
#define CONFIG_TQM5200 1 /* ... on TQM5200 module */
|
|
#undef CONFIG_TQM5200_REV100 /* define for revision 100 modules */
|
|
|
|
/*
|
|
* Valid values for CONFIG_SYS_TEXT_BASE are:
|
|
* 0xFC000000 boot low (standard configuration with room for
|
|
* max 64 MByte Flash ROM)
|
|
* 0xFFF00000 boot high (for a backup copy of U-Boot)
|
|
* 0x00100000 boot from RAM (for testing only)
|
|
*/
|
|
#ifndef CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_TEXT_BASE 0xFC000000
|
|
#endif
|
|
|
|
/* On a Cameron or on a FO300 board or ... */
|
|
#if !defined(CONFIG_CAM5200) && !defined(CONFIG_CHARON) \
|
|
&& !defined(CONFIG_FO300)
|
|
#define CONFIG_STK52XX 1 /* ... on a STK52XX board */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* ... running at 33.000000MHz */
|
|
|
|
#define CONFIG_HIGH_BATS 1 /* High BATs supported */
|
|
|
|
/*
|
|
* Serial console configuration
|
|
*/
|
|
#define CONFIG_PSC_CONSOLE 1 /* console is on PSC1 */
|
|
#define CONFIG_BAUDRATE 115200 /* ... at 115200 bps */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200, 230400 }
|
|
#define CONFIG_BOOTCOUNT_LIMIT 1
|
|
|
|
#ifdef CONFIG_FO300
|
|
#define CONFIG_SYS_DEVICE_NULLDEV 1 /* enable null device */
|
|
#define CONFIG_SILENT_CONSOLE 1 /* enable silent startup */
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1 /* used to detect S1 switch position */
|
|
#define CONFIG_USB_BIN_FIXUP 1 /* for a buggy USB device */
|
|
#if 0
|
|
#define FO300_SILENT_CONSOLE_WHEN_S1_CLOSED 1 /* silent console on PSC1 when S1 */
|
|
/* switch is closed */
|
|
#endif
|
|
|
|
#undef FO300_SILENT_CONSOLE_WHEN_S1_CLOSED /* silent console on PSC1 when S1 */
|
|
/* switch is open */
|
|
#endif /* CONFIG_FO300 */
|
|
|
|
#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
|
|
#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
|
|
#define CONFIG_PS2MULT /* .. on PS/2 Multiplexer */
|
|
#define CONFIG_PS2SERIAL 6 /* .. on PSC6 */
|
|
#define CONFIG_PS2MULT_DELAY (CONFIG_SYS_HZ/2) /* Initial delay */
|
|
#define CONFIG_BOARD_EARLY_INIT_R
|
|
#endif /* CONFIG_STK52XX */
|
|
|
|
/*
|
|
* PCI Mapping:
|
|
* 0x40000000 - 0x4fffffff - PCI Memory
|
|
* 0x50000000 - 0x50ffffff - PCI IO Space
|
|
*/
|
|
#if defined(CONFIG_CHARON) || defined(CONFIG_STK52XX)
|
|
#define CONFIG_PCI 1
|
|
#define CONFIG_PCI_PNP 1
|
|
/* #define CONFIG_PCI_SCAN_SHOW 1 */
|
|
|
|
#define CONFIG_PCI_MEM_BUS 0x40000000
|
|
#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
|
|
#define CONFIG_PCI_MEM_SIZE 0x10000000
|
|
|
|
#define CONFIG_PCI_IO_BUS 0x50000000
|
|
#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
|
|
#define CONFIG_PCI_IO_SIZE 0x01000000
|
|
|
|
#define CONFIG_EEPRO100 1
|
|
#define CONFIG_SYS_RX_ETH_BUFFER 8 /* use 8 rx buffer on eepro100 */
|
|
#define CONFIG_NS8382X 1
|
|
#endif /* CONFIG_STK52XX */
|
|
|
|
/*
|
|
* Video console
|
|
*/
|
|
#ifndef CONFIG_TQM5200S /* No graphics controller on TQM5200S */
|
|
#define CONFIG_VIDEO
|
|
#define CONFIG_VIDEO_SM501
|
|
#define CONFIG_VIDEO_SM501_32BPP
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VIDEO_LOGO
|
|
|
|
#ifndef CONFIG_FO300
|
|
#define CONFIG_CONSOLE_EXTRA_INFO
|
|
#else
|
|
#define CONFIG_VIDEO_BMP_LOGO
|
|
#endif
|
|
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
|
#define CONFIG_SPLASH_SCREEN
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV
|
|
#endif /* #ifndef CONFIG_TQM5200S */
|
|
|
|
|
|
/* Partitions */
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_ISO_PARTITION
|
|
|
|
/* USB */
|
|
#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
|
|
defined(CONFIG_STK52XX)
|
|
#define CONFIG_USB_OHCI_NEW
|
|
#define CONFIG_SYS_OHCI_BE_CONTROLLER
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_USB
|
|
|
|
#undef CONFIG_SYS_USB_OHCI_BOARD_INIT
|
|
#define CONFIG_SYS_USB_OHCI_CPU_INIT
|
|
#define CONFIG_SYS_USB_OHCI_REGS_BASE MPC5XXX_USB
|
|
#define CONFIG_SYS_USB_OHCI_SLOT_NAME "mpc5200"
|
|
#define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 15
|
|
|
|
#endif
|
|
|
|
#ifndef CONFIG_CAM5200
|
|
/* POST support */
|
|
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
|
|
CONFIG_SYS_POST_CPU | \
|
|
CONFIG_SYS_POST_I2C)
|
|
#endif
|
|
|
|
#ifdef CONFIG_POST
|
|
/* preserve space for the post_word at end of on-chip SRAM */
|
|
#define MPC5XXX_SRAM_POST_SIZE MPC5XXX_SRAM_SIZE-4
|
|
#endif
|
|
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#include <config_cmd_default.h>
|
|
|
|
#define CONFIG_CMD_ASKENV
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_DHCP
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_I2C
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_MII
|
|
#define CONFIG_CMD_NFS
|
|
#define CONFIG_CMD_PING
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_SNTP
|
|
#define CONFIG_CMD_BSP
|
|
|
|
#ifdef CONFIG_VIDEO
|
|
#define CONFIG_CMD_BMP
|
|
#endif
|
|
|
|
#ifdef CONFIG_PCI
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_PCIAUTO_SKIP_HOST_BRIDGE 1
|
|
#endif
|
|
|
|
#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
|
|
defined(CONFIG_MINIFAP) || defined(CONFIG_STK52XX)
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_FAT
|
|
#define CONFIG_CMD_EXT2
|
|
#endif
|
|
|
|
#if defined(CONFIG_CHARON) || defined(CONFIG_FO300) || \
|
|
defined(CONFIG_STK52XX)
|
|
#define CONFIG_CFG_USB
|
|
#define CONFIG_CFG_FAT
|
|
#endif
|
|
|
|
#ifdef CONFIG_POST
|
|
#define CONFIG_CMD_DIAG
|
|
#endif
|
|
|
|
|
|
#define CONFIG_TIMESTAMP /* display image timestamps */
|
|
|
|
#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
|
|
# define CONFIG_SYS_LOWBOOT 1 /* Boot low */
|
|
#endif
|
|
|
|
/*
|
|
* Autobooting
|
|
*/
|
|
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
|
|
|
|
#define CONFIG_PREBOOT "echo;" \
|
|
"echo Type \\\"run flash_nfs\\\" to mount root filesystem over NFS;" \
|
|
"echo"
|
|
|
|
#undef CONFIG_BOOTARGS
|
|
|
|
#if defined(CONFIG_TQM5200_B) && !defined(CONFIG_SYS_LOWBOOT)
|
|
# define ENV_UPDT \
|
|
"update=protect off FFF00000 +${filesize};" \
|
|
"erase FFF00000 +${filesize};" \
|
|
"cp.b 200000 FFF00000 ${filesize};" \
|
|
"protect on FFF00000 +${filesize}\0"
|
|
#else /* default lowboot configuration */
|
|
# define ENV_UPDT \
|
|
"update=protect off FC000000 +${filesize};" \
|
|
"erase FC000000 +${filesize};" \
|
|
"cp.b 200000 FC000000 ${filesize};" \
|
|
"protect on FC000000 +${filesize}\0"
|
|
#endif
|
|
|
|
#if defined(CONFIG_TQM5200)
|
|
#define CUSTOM_ENV_SETTINGS \
|
|
"hostname=tqm5200\0" \
|
|
"bootfile=/tftpboot/tqm5200/uImage\0" \
|
|
"fdt_file=/tftpboot/tqm5200/tqm5200.dtb\0" \
|
|
"u-boot=/tftpboot/tqm5200/u-boot.bin\0"
|
|
#elif defined(CONFIG_CAM5200)
|
|
#define CUSTOM_ENV_SETTINGS \
|
|
"bootfile=cam5200/uImage\0" \
|
|
"u-boot=cam5200/u-boot.bin\0" \
|
|
"setup=tftp 200000 cam5200/setup.img; source 200000\0"
|
|
#endif
|
|
|
|
#if defined(CONFIG_TQM5200_B)
|
|
#define ENV_FLASH_LAYOUT \
|
|
"fdt_addr=FC100000\0" \
|
|
"kernel_addr=FC140000\0" \
|
|
"ramdisk_addr=FC600000\0"
|
|
#elif defined(CONFIG_CHARON)
|
|
#define ENV_FLASH_LAYOUT \
|
|
"fdt_addr=FDFC0000\0" \
|
|
"kernel_addr=FC0A0000\0" \
|
|
"ramdisk_addr=FC200000\0"
|
|
#else /* !CONFIG_TQM5200_B */
|
|
#define ENV_FLASH_LAYOUT \
|
|
"fdt_addr=FC0A0000\0" \
|
|
"kernel_addr=FC0C0000\0" \
|
|
"ramdisk_addr=FC300000\0"
|
|
#endif
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=eth0\0" \
|
|
"console=ttyPSC0\0" \
|
|
ENV_FLASH_LAYOUT \
|
|
"kernel_addr_r=400000\0" \
|
|
"fdt_addr_r=600000\0" \
|
|
"rootpath=/opt/eldk/ppc_6xx\0" \
|
|
"ramargs=setenv bootargs root=/dev/ram rw\0" \
|
|
"nfsargs=setenv bootargs root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath}\0" \
|
|
"addip=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}" \
|
|
":${hostname}:${netdev}:off panic=1\0" \
|
|
"addcons=setenv bootargs ${bootargs} " \
|
|
"console=${console},${baudrate}\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"flash_self_old=sete console ttyS0; " \
|
|
"run ramargs addip addcons addmtd; " \
|
|
"bootm ${kernel_addr} ${ramdisk_addr}\0" \
|
|
"flash_self=run ramargs addip addcons;" \
|
|
"bootm ${kernel_addr} ${ramdisk_addr} ${fdt_addr}\0" \
|
|
"flash_nfs_old=sete console ttyS0; run nfsargs addip addcons;" \
|
|
"bootm ${kernel_addr}\0" \
|
|
"flash_nfs=run nfsargs addip addcons;" \
|
|
"bootm ${kernel_addr} - ${fdt_addr}\0" \
|
|
"net_nfs_old=tftp ${kernel_addr_r} ${bootfile};" \
|
|
"sete console ttyS0; run nfsargs addip addcons;bootm\0" \
|
|
"net_nfs=tftp ${kernel_addr_r} ${bootfile}; " \
|
|
"tftp ${fdt_addr_r} ${fdt_file}; " \
|
|
"run nfsargs addip addcons addmtd; " \
|
|
"bootm ${kernel_addr_r} - ${fdt_addr_r}\0" \
|
|
CUSTOM_ENV_SETTINGS \
|
|
"load=tftp 200000 ${u-boot}\0" \
|
|
ENV_UPDT \
|
|
""
|
|
|
|
#define CONFIG_BOOTCOMMAND "run net_nfs"
|
|
|
|
/*
|
|
* IPB Bus clocking configuration.
|
|
*/
|
|
#define CONFIG_SYS_IPBCLK_EQUALS_XLBCLK /* define for 133MHz speed */
|
|
|
|
#if defined(CONFIG_SYS_IPBCLK_EQUALS_XLBCLK) && !defined(CONFIG_CAM5200)
|
|
/*
|
|
* PCI Bus clocking configuration
|
|
*
|
|
* Actually a PCI Clock of 66 MHz is only set (in cpu_init.c) if
|
|
* CONFIG_SYS_IPBCLK_EQUALS_XLBCLK is defined. This is because a PCI Clock of
|
|
* 66 MHz yet hasn't been tested with a IPB Bus Clock of 66 MHz.
|
|
*/
|
|
#define CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2 /* define for 66MHz speed */
|
|
#endif
|
|
|
|
/*
|
|
* I2C configuration
|
|
*/
|
|
#define CONFIG_HARD_I2C 1 /* I2C with hardware support */
|
|
#ifdef CONFIG_TQM5200_REV100
|
|
#define CONFIG_SYS_I2C_MODULE 1 /* Select I2C module #1 for rev. 100 board */
|
|
#else
|
|
#define CONFIG_SYS_I2C_MODULE 2 /* Select I2C module #2 for all other revs */
|
|
#endif
|
|
|
|
/*
|
|
* I2C clock frequency
|
|
*
|
|
* Please notice, that the resulting clock frequency could differ from the
|
|
* configured value. This is because the I2C clock is derived from system
|
|
* clock over a frequency divider with only a few divider values. U-boot
|
|
* calculates the best approximation for CONFIG_SYS_I2C_SPEED. However the calculated
|
|
* approximation allways lies below the configured value, never above.
|
|
*/
|
|
#define CONFIG_SYS_I2C_SPEED 100000 /* 100 kHz */
|
|
#define CONFIG_SYS_I2C_SLAVE 0x7F
|
|
|
|
/*
|
|
* EEPROM configuration for onboard EEPROM M24C32 (M24C64 should work
|
|
* also). For other EEPROMs configuration should be verified. On Mini-FAP the
|
|
* EEPROM (24C64) is on the same I2C address (but on other I2C bus), so the
|
|
* same configuration could be used.
|
|
*/
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* 1010000x */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 5 /* =32 Bytes per write */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 20
|
|
|
|
/*
|
|
* HW-Monitor configuration on Mini-FAP
|
|
*/
|
|
#if defined (CONFIG_MINIFAP)
|
|
#define CONFIG_SYS_I2C_HWMON_ADDR 0x2C
|
|
#endif
|
|
|
|
/* List of I2C addresses to be verified by POST */
|
|
#if defined (CONFIG_MINIFAP)
|
|
#undef CONFIG_SYS_POST_I2C_ADDRS
|
|
#define CONFIG_SYS_POST_I2C_ADDRS {CONFIG_SYS_I2C_EEPROM_ADDR, \
|
|
CONFIG_SYS_I2C_HWMON_ADDR, \
|
|
CONFIG_SYS_I2C_SLAVE}
|
|
#endif
|
|
|
|
/*
|
|
* Flash configuration
|
|
*/
|
|
#define CONFIG_SYS_FLASH_BASE 0xFC000000
|
|
|
|
#if defined(CONFIG_CAM5200) && defined(CONFIG_CAM5200_NIOSFLASH)
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 2 /* max num of flash banks
|
|
(= chip selects) */
|
|
#define CONFIG_SYS_FLASH_WORD_SIZE unsigned int /* main flash device with */
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Timeout for Flash Erase (in ms) */
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
|
|
|
|
#define CONFIG_SYS_FLASH_ADDR0 0x555
|
|
#define CONFIG_SYS_FLASH_ADDR1 0x2AA
|
|
#define CONFIG_SYS_FLASH_2ND_16BIT_DEV 1 /* NIOS flash is a 16bit device */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
#else
|
|
/* use CFI flash driver */
|
|
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
|
|
#define CONFIG_FLASH_CFI_DRIVER 1 /* Use the common driver */
|
|
#define CONFIG_FLASH_CFI_MTD /* with MTD support */
|
|
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_BOOTCS_START }
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
|
|
(= chip selects) */
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 512 /* max num of sects on one chip */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
#define CONFIG_SYS_FLASH_SIZE 0x04000000 /* 64 MByte */
|
|
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE 1
|
|
|
|
#if defined (CONFIG_CAM5200)
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00040000)
|
|
#elif defined(CONFIG_TQM5200_B)
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00080000)
|
|
#else
|
|
# define CONFIG_ENV_ADDR (CONFIG_SYS_FLASH_BASE + 0x00060000)
|
|
#endif
|
|
|
|
/* Dynamic MTD partition support */
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
|
|
#define MTDIDS_DEFAULT "nor0=fc000000.flash"
|
|
|
|
#if defined(CONFIG_STK52XX)
|
|
# if defined(CONFIG_TQM5200_B)
|
|
# if defined(CONFIG_SYS_LOWBOOT)
|
|
# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:1m(firmware)," \
|
|
"256k(dtb)," \
|
|
"2304k(kernel)," \
|
|
"2560k(small-fs)," \
|
|
"2m(initrd)," \
|
|
"8m(misc)," \
|
|
"16m(big-fs)"
|
|
# else /* highboot */
|
|
# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:2560k(kernel),"\
|
|
"3584k(small-fs)," \
|
|
"2m(initrd)," \
|
|
"8m(misc)," \
|
|
"15m(big-fs)," \
|
|
"1m(firmware)"
|
|
# endif /* CONFIG_SYS_LOWBOOT */
|
|
# else /* !CONFIG_TQM5200_B */
|
|
# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\
|
|
"128k(dtb)," \
|
|
"2304k(kernel)," \
|
|
"2m(initrd)," \
|
|
"4m(small-fs)," \
|
|
"8m(misc)," \
|
|
"15m(big-fs)"
|
|
# endif /* CONFIG_TQM5200_B */
|
|
#elif defined (CONFIG_CAM5200)
|
|
# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:768k(firmware),"\
|
|
"1792k(kernel)," \
|
|
"5632k(rootfs)," \
|
|
"24m(home)"
|
|
#elif defined (CONFIG_CHARON)
|
|
# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\
|
|
"1408k(kernel)," \
|
|
"2m(initrd)," \
|
|
"4m(small-fs)," \
|
|
"24320k(big-fs)," \
|
|
"256k(dts)"
|
|
#elif defined (CONFIG_FO300)
|
|
# define MTDPARTS_DEFAULT "mtdparts=fc000000.flash:640k(firmware),"\
|
|
"1408k(kernel)," \
|
|
"2m(initrd)," \
|
|
"4m(small-fs)," \
|
|
"8m(misc)," \
|
|
"16m(big-fs)"
|
|
#else
|
|
# error "Unknown Carrier Board"
|
|
#endif /* CONFIG_STK52XX */
|
|
|
|
/*
|
|
* Environment settings
|
|
*/
|
|
#define CONFIG_ENV_IS_IN_FLASH 1
|
|
#define CONFIG_ENV_SIZE 0x4000 /* 16 k - keep small for fast booting */
|
|
#if defined(CONFIG_TQM5200_B) || defined (CONFIG_CAM5200)
|
|
#define CONFIG_ENV_SECT_SIZE 0x40000
|
|
#else
|
|
#define CONFIG_ENV_SECT_SIZE 0x20000
|
|
#endif /* CONFIG_TQM5200_B */
|
|
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR + CONFIG_ENV_SECT_SIZE)
|
|
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
|
|
|
|
/*
|
|
* Memory map
|
|
*/
|
|
#define CONFIG_SYS_MBAR 0xF0000000
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
|
|
|
|
/* Use ON-Chip SRAM until RAM will be available */
|
|
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
|
|
#ifdef CONFIG_POST
|
|
/* preserve space for the post_word at end of on-chip SRAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_POST_SIZE
|
|
#else
|
|
#define CONFIG_SYS_INIT_RAM_SIZE MPC5XXX_SRAM_SIZE
|
|
#endif
|
|
|
|
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
|
|
# define CONFIG_SYS_RAMBOOT 1
|
|
#endif
|
|
|
|
#if defined (CONFIG_CAM5200)
|
|
# define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
|
|
#elif defined(CONFIG_TQM5200_B)
|
|
# define CONFIG_SYS_MONITOR_LEN (512 << 10) /* Reserve 512 kB for Monitor */
|
|
#else
|
|
# define CONFIG_SYS_MONITOR_LEN (384 << 10) /* Reserve 384 kB for Monitor */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_MALLOC_LEN (1024 << 10) /* Reserve 1024 kB for malloc() */
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
|
|
/*
|
|
* Ethernet configuration
|
|
*/
|
|
#define CONFIG_MPC5xxx_FEC 1
|
|
#define CONFIG_MPC5xxx_FEC_MII100
|
|
/*
|
|
* Define CONFIG_MPC5xxx_FEC_MII10 to force FEC at 10Mb
|
|
*/
|
|
/* #define CONFIG_MPC5xxx_FEC_MII10 */
|
|
#define CONFIG_PHY_ADDR 0x00
|
|
|
|
/*
|
|
* GPIO configuration
|
|
*
|
|
* use CS1: Bit 0 (mask: 0x80000000):
|
|
* 1 -> Pin gpio_wkup_6 as second SDRAM chip select (mem_cs1).
|
|
* use ALT CAN position: Bits 2-3 (mask: 0x30000000):
|
|
* 00 -> No Alternatives, CAN1/2 on PSC2 according to PSC2 setting.
|
|
* SPI on PSC3 according to PSC3 setting. Use for CAM5200.
|
|
* 01 -> CAN1 on I2C1, CAN2 on Tmr0/1.
|
|
* Use for REV200 STK52XX boards and FO300 boards. Do not use
|
|
* with REV100 modules (because, there I2C1 is used as I2C bus).
|
|
* use ATA: Bits 6-7 (mask 0x03000000):
|
|
* 00 -> No ATA chip selects, csb_4/5 used as normal chip selects.
|
|
* Use for CAM5200 board.
|
|
* 01 -> ATA cs0/1 on csb_4/5. Use for the remaining boards.
|
|
* use PSC6: Bits 9-11 (mask 0x00700000):
|
|
* 000 -> use PSC6_0 to PSC6_3 as GPIO, PSC6 could not be used as
|
|
* UART, CODEC or IrDA.
|
|
* GPIO on PSC6_3 is used in post_hotkeys_pressed() to
|
|
* enable extended POST tests.
|
|
* Use for MINI-FAP and TQM5200_IB boards.
|
|
* 101 -> use PSC6 as UART. Pins PSC6_0 to PSC6_3 are used.
|
|
* Extended POST test is not available.
|
|
* Use for STK52xx, FO300 and CAM5200 boards.
|
|
* WARNING: When the extended POST is enabled, these bits will
|
|
* be overridden by this code as GPIOs!
|
|
* use PCI_DIS: Bit 16 (mask 0x00008000):
|
|
* 1 -> disable PCI controller (on CAM5200 board).
|
|
* use USB: Bits 18-19 (mask 0x00003000):
|
|
* 10 -> two UARTs (on FO300 and CAM5200).
|
|
* use PSC3: Bits 20-23 (mask: 0x00000f00):
|
|
* 0000 -> All PSC3 pins are GPIOs.
|
|
* 1100 -> UART/SPI (on FO300 board).
|
|
* 0100 -> UART (on CAM5200 board).
|
|
* use PSC2: Bits 25:27 (mask: 0x00000030):
|
|
* 000 -> All PSC2 pins are GPIOs.
|
|
* 100 -> UART (on CAM5200 board).
|
|
* 001 -> CAN1/2 on PSC2 pins.
|
|
* Use for REV100 STK52xx boards
|
|
* 01x -> Use AC97 (on FO300 board).
|
|
* use PSC1: Bits 29-31 (mask: 0x00000007):
|
|
* 100 -> UART (on all boards).
|
|
*/
|
|
#if !defined(CONFIG_SYS_GPS_PORT_CONFIG)
|
|
#if defined (CONFIG_MINIFAP)
|
|
# define CONFIG_SYS_GPS_PORT_CONFIG 0x91000004
|
|
#elif defined (CONFIG_STK52XX)
|
|
# if defined (CONFIG_STK52XX_REV100)
|
|
# define CONFIG_SYS_GPS_PORT_CONFIG 0x81500014
|
|
# else /* STK52xx REV200 and above */
|
|
# if defined (CONFIG_TQM5200_REV100)
|
|
# error TQM5200 REV100 not supported on STK52XX REV200 or above
|
|
# else/* TQM5200 REV200 and above */
|
|
# define CONFIG_SYS_GPS_PORT_CONFIG 0x91500404
|
|
# endif
|
|
# endif
|
|
#elif defined (CONFIG_FO300)
|
|
# define CONFIG_SYS_GPS_PORT_CONFIG 0x91502c24
|
|
#elif defined (CONFIG_CAM5200)
|
|
# define CONFIG_SYS_GPS_PORT_CONFIG 0x8050A444
|
|
#else /* TMQ5200 Inbetriebnahme-Board */
|
|
# define CONFIG_SYS_GPS_PORT_CONFIG 0x81000004
|
|
#endif
|
|
#endif
|
|
|
|
/*
|
|
* RTC configuration
|
|
*/
|
|
#if defined (CONFIG_STK52XX) && !defined (CONFIG_STK52XX_REV100)
|
|
# define CONFIG_RTC_M41T11 1
|
|
# define CONFIG_SYS_I2C_RTC_ADDR 0x68
|
|
# define CONFIG_SYS_M41T11_BASE_YEAR 1900 /* because Linux uses the same base
|
|
year */
|
|
#else
|
|
# define CONFIG_RTC_MPC5200 1 /* use internal MPC5200 RTC */
|
|
#endif
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
|
|
#define CONFIG_CMDLINE_EDITING 1 /* add command line history */
|
|
#define CONFIG_SYS_HUSH_PARSER 1 /* use "hush" command parser */
|
|
|
|
#define CONFIG_SYS_CACHELINE_SIZE 32 /* For MPC5xxx CPUs */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CACHELINE_SHIFT 5 /* log base 2 of the above value */
|
|
#endif
|
|
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
/* Enable an alternate, more extensive memory test */
|
|
#define CONFIG_SYS_ALT_MEMTEST
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x00f00000 /* 1 ... 15 MB in DRAM */
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */
|
|
|
|
/*
|
|
* Enable loopw command.
|
|
*/
|
|
#define CONFIG_LOOPW
|
|
|
|
/*
|
|
* Various low-level settings
|
|
*/
|
|
#define CONFIG_SYS_HID0_INIT HID0_ICE | HID0_ICFI
|
|
#define CONFIG_SYS_HID0_FINAL HID0_ICE
|
|
|
|
#define CONFIG_SYS_BOOTCS_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_BOOTCS_SIZE CONFIG_SYS_FLASH_SIZE
|
|
#ifdef CONFIG_SYS_PCICLK_EQUALS_IPBCLK_DIV2
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x0008DF30 /* for pci_clk = 66 MHz */
|
|
#else
|
|
#define CONFIG_SYS_BOOTCS_CFG 0x0004DF30 /* for pci_clk = 33 MHz */
|
|
#endif
|
|
#define CONFIG_SYS_CS0_START CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_CS0_SIZE CONFIG_SYS_FLASH_SIZE
|
|
|
|
#define CONFIG_LAST_STAGE_INIT
|
|
|
|
/*
|
|
* SRAM - Do not map below 2 GB in address space, because this area is used
|
|
* for SDRAM autosizing.
|
|
*/
|
|
#define CONFIG_SYS_CS2_START 0xE5000000
|
|
#define CONFIG_SYS_CS2_SIZE 0x100000 /* 1 MByte */
|
|
#define CONFIG_SYS_CS2_CFG 0x0004D930
|
|
|
|
/*
|
|
* Grafic controller - Do not map below 2 GB in address space, because this
|
|
* area is used for SDRAM autosizing.
|
|
*/
|
|
#define SM501_FB_BASE 0xE0000000
|
|
#define CONFIG_SYS_CS1_START (SM501_FB_BASE)
|
|
#define CONFIG_SYS_CS1_SIZE 0x4000000 /* 64 MByte */
|
|
#define CONFIG_SYS_CS1_CFG 0x8F48FF70
|
|
#define SM501_MMIO_BASE CONFIG_SYS_CS1_START + 0x03E00000
|
|
|
|
#define CONFIG_SYS_CS_BURST 0x00000000
|
|
#define CONFIG_SYS_CS_DEADCYCLE 0x33333311 /* 1 dead cycle for flash and SM501 */
|
|
|
|
#if defined(CONFIG_CAM5200)
|
|
#define CONFIG_SYS_CS4_START 0xB0000000
|
|
#define CONFIG_SYS_CS4_SIZE 0x00010000
|
|
#define CONFIG_SYS_CS4_CFG 0x01019C10
|
|
|
|
#define CONFIG_SYS_CS5_START 0xD0000000
|
|
#define CONFIG_SYS_CS5_SIZE 0x01208000
|
|
#define CONFIG_SYS_CS5_CFG 0x1414BF10
|
|
#endif
|
|
|
|
#define CONFIG_SYS_RESET_ADDRESS 0xff000000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* USB stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_USB_CLOCK 0x0001BBBB
|
|
#define CONFIG_USB_CONFIG 0x00001000
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* IDE/ATA stuff Supports IDE harddisk
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
|
|
#undef CONFIG_IDE_8xx_PCCARD /* Use IDE with PC Card Adapter */
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* Direct IDE not supported */
|
|
#undef CONFIG_IDE_LED /* LED for ide not supported */
|
|
|
|
#define CONFIG_IDE_RESET /* reset for ide supported */
|
|
#define CONFIG_IDE_PREINIT
|
|
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE bus */
|
|
#define CONFIG_SYS_IDE_MAXDEVICE 2 /* max. 2 drives per IDE bus */
|
|
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR MPC5XXX_ATA
|
|
|
|
/* Offset for data I/O */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET (0x0060)
|
|
|
|
/* Offset for normal register accesses */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET (CONFIG_SYS_ATA_DATA_OFFSET)
|
|
|
|
/* Offset for alternate registers */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET (0x005C)
|
|
|
|
/* Interval between registers */
|
|
#define CONFIG_SYS_ATA_STRIDE 4
|
|
|
|
/* Support ATAPI devices */
|
|
#define CONFIG_ATAPI 1
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Open firmware flat tree support
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define CONFIG_OF_LIBFDT 1
|
|
#define CONFIG_OF_BOARD_SETUP 1
|
|
|
|
#define OF_CPU "PowerPC,5200@0"
|
|
#define OF_SOC "soc5200@f0000000"
|
|
#define OF_TBCLK (bd->bi_busfreq / 4)
|
|
#define OF_STDOUT_PATH "/soc5200@f0000000/serial@2000"
|
|
|
|
#endif /* __CONFIG_H */
|