mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-30 15:03:18 +00:00
1cefed1e39
We only include <linux/mtd/rawnand.h> in <nand.h> for the forward declaration of struct nand_chip, so do that directly. Then, include <linux/mtd/rawnand.h> where required directly. Signed-off-by: Tom Rini <trini@konsulko.com>
49 lines
1.1 KiB
C
49 lines
1.1 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright 2008 Extreme Engineering Solutions, Inc.
|
|
*
|
|
* This driver support NAND devices which have address lines
|
|
* connected as ALE and CLE inputs.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <nand.h>
|
|
#include <linux/mtd/rawnand.h>
|
|
#include <asm/io.h>
|
|
|
|
/*
|
|
* Hardware specific access to control-lines
|
|
*/
|
|
static void nand_addr_hwcontrol(struct mtd_info *mtd, int cmd, uint ctrl)
|
|
{
|
|
struct nand_chip *this = mtd_to_nand(mtd);
|
|
ulong IO_ADDR_W;
|
|
|
|
if (ctrl & NAND_CTRL_CHANGE) {
|
|
IO_ADDR_W = (ulong)this->IO_ADDR_W;
|
|
|
|
IO_ADDR_W &= ~(CONFIG_SYS_NAND_ACTL_CLE |
|
|
CONFIG_SYS_NAND_ACTL_ALE |
|
|
CONFIG_SYS_NAND_ACTL_NCE);
|
|
if (ctrl & NAND_CLE)
|
|
IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_CLE;
|
|
if (ctrl & NAND_ALE)
|
|
IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_ALE;
|
|
if (ctrl & NAND_NCE)
|
|
IO_ADDR_W |= CONFIG_SYS_NAND_ACTL_NCE;
|
|
|
|
this->IO_ADDR_W = (void *)IO_ADDR_W;
|
|
}
|
|
|
|
if (cmd != NAND_CMD_NONE)
|
|
writeb(cmd, this->IO_ADDR_W);
|
|
}
|
|
|
|
int board_nand_init(struct nand_chip *nand)
|
|
{
|
|
nand->ecc.mode = NAND_ECC_SOFT;
|
|
nand->cmd_ctrl = nand_addr_hwcontrol;
|
|
nand->chip_delay = CONFIG_SYS_NAND_ACTL_DELAY;
|
|
|
|
return 0;
|
|
}
|