mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 17:07:38 +00:00
911d6f6932
After power-on, both LAPIC and I/O APIC appear with the same APIC ID zero, which creates an ID conflict. When generating MP table, U-Boot reports zero as the LAPIC ID in the processor entry, and zero as the I/O APIC ID in the I/O APIC as well as the I/O interrupt assignment entries. Such MP table confuses Linux kernel and finally a kernel panic is seen during boot: BUG: unable to handle kernel paging request at ffff9000 IP: [<c101d462>] native_io_apic_write+0x22/0x30 *pdpt = 00000000014fb001 *pde = 00000000014ff067 *pte = 0000000000000000 Oops: 0002 [#1] Modules linked in: Pid: 1, comm: swapper Tainted: G W 3.8.7 #3 intel galileo/galileo EIP: 0060:[<c101d462>] EFLAGS: 00010086 CPU: 0 EIP is at native_io_apic_write+0x22/0x30 ... Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
366 lines
10 KiB
C
366 lines
10 KiB
C
/*
|
|
* Copyright (C) 2015, Bin Meng <bmeng.cn@gmail.com>
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mmc.h>
|
|
#include <asm/io.h>
|
|
#include <asm/ioapic.h>
|
|
#include <asm/mrccache.h>
|
|
#include <asm/mtrr.h>
|
|
#include <asm/pci.h>
|
|
#include <asm/post.h>
|
|
#include <asm/arch/device.h>
|
|
#include <asm/arch/msg_port.h>
|
|
#include <asm/arch/quark.h>
|
|
|
|
static struct pci_device_id mmc_supported[] = {
|
|
{ PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_QRK_SDIO },
|
|
{},
|
|
};
|
|
|
|
static void quark_setup_mtrr(void)
|
|
{
|
|
u32 base, mask;
|
|
int i;
|
|
|
|
disable_caches();
|
|
|
|
/* mark the VGA RAM area as uncacheable */
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_A0000,
|
|
MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_B0000,
|
|
MTRR_FIX_TYPE(MTRR_TYPE_UNCACHEABLE));
|
|
|
|
/* mark other fixed range areas as cacheable */
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_00000,
|
|
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_64K_40000,
|
|
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_80000,
|
|
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_FIX_16K_90000,
|
|
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
|
|
for (i = MTRR_FIX_4K_C0000; i <= MTRR_FIX_4K_FC000; i++)
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, i,
|
|
MTRR_FIX_TYPE(MTRR_TYPE_WRBACK));
|
|
|
|
/* variable range MTRR#0: ROM area */
|
|
mask = ~(CONFIG_SYS_MONITOR_LEN - 1);
|
|
base = CONFIG_SYS_TEXT_BASE & mask;
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ROM),
|
|
base | MTRR_TYPE_WRBACK);
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ROM),
|
|
mask | MTRR_PHYS_MASK_VALID);
|
|
|
|
/* variable range MTRR#1: eSRAM area */
|
|
mask = ~(ESRAM_SIZE - 1);
|
|
base = CONFIG_ESRAM_BASE & mask;
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYBASE(MTRR_VAR_ESRAM),
|
|
base | MTRR_TYPE_WRBACK);
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_VAR_PHYMASK(MTRR_VAR_ESRAM),
|
|
mask | MTRR_PHYS_MASK_VALID);
|
|
|
|
/* enable both variable and fixed range MTRRs */
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, MTRR_DEF_TYPE,
|
|
MTRR_DEF_TYPE_EN | MTRR_DEF_TYPE_FIX_EN);
|
|
|
|
enable_caches();
|
|
}
|
|
|
|
static void quark_setup_bars(void)
|
|
{
|
|
/* GPIO - D31:F0:R44h */
|
|
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GBA,
|
|
CONFIG_GPIO_BASE | IO_BAR_EN);
|
|
|
|
/* ACPI PM1 Block - D31:F0:R48h */
|
|
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_PM1BLK,
|
|
CONFIG_ACPI_PM1_BASE | IO_BAR_EN);
|
|
|
|
/* GPE0 - D31:F0:R4Ch */
|
|
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_GPE0BLK,
|
|
CONFIG_ACPI_GPE0_BASE | IO_BAR_EN);
|
|
|
|
/* WDT - D31:F0:R84h */
|
|
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_WDTBA,
|
|
CONFIG_WDT_BASE | IO_BAR_EN);
|
|
|
|
/* RCBA - D31:F0:RF0h */
|
|
qrk_pci_write_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA,
|
|
CONFIG_RCBA_BASE | MEM_BAR_EN);
|
|
|
|
/* ACPI P Block - Msg Port 04:R70h */
|
|
msg_port_write(MSG_PORT_RMU, PBLK_BA,
|
|
CONFIG_ACPI_PBLK_BASE | IO_BAR_EN);
|
|
|
|
/* SPI DMA - Msg Port 04:R7Ah */
|
|
msg_port_write(MSG_PORT_RMU, SPI_DMA_BA,
|
|
CONFIG_SPI_DMA_BASE | IO_BAR_EN);
|
|
|
|
/* PCIe ECAM */
|
|
msg_port_write(MSG_PORT_MEM_ARBITER, AEC_CTRL,
|
|
CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
|
|
msg_port_write(MSG_PORT_HOST_BRIDGE, HEC_REG,
|
|
CONFIG_PCIE_ECAM_BASE | MEM_BAR_EN);
|
|
}
|
|
|
|
static void quark_pcie_early_init(void)
|
|
{
|
|
/*
|
|
* Step1: Assert PCIe signal PERST#
|
|
*
|
|
* The CPU interface to the PERST# signal is platform dependent.
|
|
* Call the board-specific codes to perform this task.
|
|
*/
|
|
board_assert_perst();
|
|
|
|
/* Step2: PHY common lane reset */
|
|
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_PHY_LANE_RST);
|
|
/* wait 1 ms for PHY common lane reset */
|
|
mdelay(1);
|
|
|
|
/* Step3: PHY sideband interface reset and controller main reset */
|
|
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG,
|
|
PCIE_PHY_SB_RST | PCIE_CTLR_MAIN_RST);
|
|
/* wait 80ms for PLL to lock */
|
|
mdelay(80);
|
|
|
|
/* Step4: Controller sideband interface reset */
|
|
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_SB_RST);
|
|
/* wait 20ms for controller sideband interface reset */
|
|
mdelay(20);
|
|
|
|
/* Step5: De-assert PERST# */
|
|
board_deassert_perst();
|
|
|
|
/* Step6: Controller primary interface reset */
|
|
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, PCIE_CFG, PCIE_CTLR_PRI_RST);
|
|
|
|
/* Mixer Load Lane 0 */
|
|
msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L0,
|
|
(1 << 6) | (1 << 7));
|
|
|
|
/* Mixer Load Lane 1 */
|
|
msg_port_io_clrbits(MSG_PORT_PCIE_AFE, PCIE_RXPICTRL0_L1,
|
|
(1 << 6) | (1 << 7));
|
|
}
|
|
|
|
static void quark_usb_early_init(void)
|
|
{
|
|
/* The sequence below comes from Quark firmware writer guide */
|
|
|
|
msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_GLOBAL_PORT,
|
|
1 << 1, (1 << 6) | (1 << 7));
|
|
|
|
msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_COMPBG,
|
|
(1 << 8) | (1 << 9), (1 << 7) | (1 << 10));
|
|
|
|
msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
|
|
|
|
msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL1, 1 << 1);
|
|
|
|
msg_port_alt_clrsetbits(MSG_PORT_USB_AFE, USB2_PLL1,
|
|
(1 << 3) | (1 << 4) | (1 << 5), 1 << 6);
|
|
|
|
msg_port_alt_clrbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 29);
|
|
|
|
msg_port_alt_setbits(MSG_PORT_USB_AFE, USB2_PLL2, 1 << 24);
|
|
}
|
|
|
|
static void quark_thermal_early_init(void)
|
|
{
|
|
/* The sequence below comes from Quark firmware writer guide */
|
|
|
|
/* thermal sensor mode config */
|
|
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
|
|
(1 << 3) | (1 << 4) | (1 << 5), 1 << 5);
|
|
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG1,
|
|
(1 << 8) | (1 << 9) | (1 << 10) | (1 << 11) |
|
|
(1 << 12), 1 << 9);
|
|
msg_port_alt_setbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 14);
|
|
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 17);
|
|
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG1, 1 << 18);
|
|
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG2, 0xffff, 0x011f);
|
|
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff, 0x17);
|
|
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG3,
|
|
(1 << 8) | (1 << 9), 1 << 8);
|
|
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG3, 0xff000000);
|
|
msg_port_alt_clrsetbits(MSG_PORT_SOC_UNIT, TS_CFG4,
|
|
0x7ff800, 0xc8 << 11);
|
|
|
|
/* thermal monitor catastrophic trip set point (105 celsius) */
|
|
msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff, 155);
|
|
|
|
/* thermal monitor catastrophic trip clear point (0 celsius) */
|
|
msg_port_clrsetbits(MSG_PORT_RMU, TS_TRIP, 0xff0000, 50 << 16);
|
|
|
|
/* take thermal sensor out of reset */
|
|
msg_port_alt_clrbits(MSG_PORT_SOC_UNIT, TS_CFG4, 1 << 0);
|
|
|
|
/* enable thermal monitor */
|
|
msg_port_setbits(MSG_PORT_RMU, TS_MODE, 1 << 15);
|
|
|
|
/* lock all thermal configuration */
|
|
msg_port_setbits(MSG_PORT_RMU, RMU_CTRL, (1 << 5) | (1 << 6));
|
|
}
|
|
|
|
static void quark_enable_legacy_seg(void)
|
|
{
|
|
msg_port_setbits(MSG_PORT_HOST_BRIDGE, HMISC2,
|
|
HMISC2_SEGE | HMISC2_SEGF | HMISC2_SEGAB);
|
|
}
|
|
|
|
int arch_cpu_init(void)
|
|
{
|
|
int ret;
|
|
|
|
post_code(POST_CPU_INIT);
|
|
|
|
ret = x86_cpu_init_f();
|
|
if (ret)
|
|
return ret;
|
|
|
|
/*
|
|
* Quark SoC does not support MSR MTRRs. Fixed and variable range MTRRs
|
|
* are accessed indirectly via the message port and not the traditional
|
|
* MSR mechanism. Only UC, WT and WB cache types are supported.
|
|
*/
|
|
quark_setup_mtrr();
|
|
|
|
/*
|
|
* Quark SoC has some non-standard BARs (excluding PCI standard BARs)
|
|
* which need be initialized with suggested values
|
|
*/
|
|
quark_setup_bars();
|
|
|
|
/* Initialize USB2 PHY */
|
|
quark_usb_early_init();
|
|
|
|
/* Initialize thermal sensor */
|
|
quark_thermal_early_init();
|
|
|
|
/* Turn on legacy segments (A/B/E/F) decode to system RAM */
|
|
quark_enable_legacy_seg();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int arch_cpu_init_dm(void)
|
|
{
|
|
/*
|
|
* Initialize PCIe controller
|
|
*
|
|
* Quark SoC holds the PCIe controller in reset following a power on.
|
|
* U-Boot needs to release the PCIe controller from reset. The PCIe
|
|
* controller (D23:F0/F1) will not be visible in PCI configuration
|
|
* space and any access to its PCI configuration registers will cause
|
|
* system hang while it is held in reset.
|
|
*/
|
|
quark_pcie_early_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int print_cpuinfo(void)
|
|
{
|
|
post_code(POST_CPU_INFO);
|
|
return default_print_cpuinfo();
|
|
}
|
|
|
|
void reset_cpu(ulong addr)
|
|
{
|
|
/* cold reset */
|
|
x86_full_reset();
|
|
}
|
|
|
|
static void quark_pcie_init(void)
|
|
{
|
|
u32 val;
|
|
|
|
/* PCIe upstream non-posted & posted request size */
|
|
qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_CCFG,
|
|
CCFG_UPRS | CCFG_UNRS);
|
|
qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_CCFG,
|
|
CCFG_UPRS | CCFG_UNRS);
|
|
|
|
/* PCIe packet fast transmit mode (IPF) */
|
|
qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MPC2, MPC2_IPF);
|
|
qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MPC2, MPC2_IPF);
|
|
|
|
/* PCIe message bus idle counter (SBIC) */
|
|
qrk_pci_read_config_dword(QUARK_PCIE0, PCIE_RP_MBC, &val);
|
|
val |= MBC_SBIC;
|
|
qrk_pci_write_config_dword(QUARK_PCIE0, PCIE_RP_MBC, val);
|
|
qrk_pci_read_config_dword(QUARK_PCIE1, PCIE_RP_MBC, &val);
|
|
val |= MBC_SBIC;
|
|
qrk_pci_write_config_dword(QUARK_PCIE1, PCIE_RP_MBC, val);
|
|
}
|
|
|
|
static void quark_usb_init(void)
|
|
{
|
|
u32 bar;
|
|
|
|
/* Change USB EHCI packet buffer OUT/IN threshold */
|
|
qrk_pci_read_config_dword(QUARK_USB_EHCI, PCI_BASE_ADDRESS_0, &bar);
|
|
writel((0x7f << 16) | 0x7f, bar + EHCI_INSNREG01);
|
|
|
|
/* Disable USB device interrupts */
|
|
qrk_pci_read_config_dword(QUARK_USB_DEVICE, PCI_BASE_ADDRESS_0, &bar);
|
|
writel(0x7f, bar + USBD_INT_MASK);
|
|
writel((0xf << 16) | 0xf, bar + USBD_EP_INT_MASK);
|
|
writel((0xf << 16) | 0xf, bar + USBD_EP_INT_STS);
|
|
}
|
|
|
|
int arch_early_init_r(void)
|
|
{
|
|
quark_pcie_init();
|
|
|
|
quark_usb_init();
|
|
|
|
return 0;
|
|
}
|
|
|
|
int cpu_mmc_init(bd_t *bis)
|
|
{
|
|
return pci_mmc_init("Quark SDHCI", mmc_supported);
|
|
}
|
|
|
|
int arch_misc_init(void)
|
|
{
|
|
#ifdef CONFIG_ENABLE_MRC_CACHE
|
|
/*
|
|
* We intend not to check any return value here, as even MRC cache
|
|
* is not saved successfully, it is not a severe error that will
|
|
* prevent system from continuing to boot.
|
|
*/
|
|
mrccache_save();
|
|
#endif
|
|
|
|
/* Assign a unique I/O APIC ID */
|
|
io_apic_set_id(1);
|
|
|
|
return 0;
|
|
}
|
|
|
|
void board_final_cleanup(void)
|
|
{
|
|
struct quark_rcba *rcba;
|
|
u32 base, val;
|
|
|
|
qrk_pci_read_config_dword(QUARK_LEGACY_BRIDGE, LB_RCBA, &base);
|
|
base &= ~MEM_BAR_EN;
|
|
rcba = (struct quark_rcba *)base;
|
|
|
|
/* Initialize 'Component ID' to zero */
|
|
val = readl(&rcba->esd);
|
|
val &= ~0xff0000;
|
|
writel(val, &rcba->esd);
|
|
|
|
/* Lock HMBOUND for security */
|
|
msg_port_setbits(MSG_PORT_HOST_BRIDGE, HM_BOUND, HM_BOUND_LOCK);
|
|
|
|
return;
|
|
}
|