Mirrors/u-boot
2
0
Fork 0
mirror of https://github.com/AsahiLinux/u-boot synced 2024-11-27 07:01:24 +00:00
Code Issues Projects Releases Packages Wiki Activity
u-boot/arch/arm/dts/exynos4210-trats.dts
Jaehoon Chung 9c2e2cab9a ARM: dts: exynos4: change the nodes relevant to mmc/sd 
Change the nodes relevant to mmc/sd for using DM.
compatible are also changed to each SoCs.

Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
2017-06-05 11:06:42 +09:00

255 lines
6 KiB
Text
Raw Blame History

/*
* Samsung's Exynos4210 based Trats board device tree source
*
* Copyright (c) 2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* SPDX-License-Identifier: GPL-2.0+
*/
/dts-v1/;
#include "exynos4210.dtsi"
/ {
model = "Samsung Trats based on Exynos4210";
compatible = "samsung,trats", "samsung,exynos4210";
config {
samsung,dsim-device-name = "s6e8ax0";
};
aliases {
serial0 = "/serial@13800000";
console = "/serial@13820000";
i2c8 = &i2c_fg;
};
fimd@11c00000 {
compatible = "samsung,exynos-fimd";
reg = <0x11c00000 0xa4>;
samsung,vl-freq = <60>;
samsung,vl-col = <720>;
samsung,vl-row = <1280>;
samsung,vl-width = <720>;
samsung,vl-height = <1280>;
samsung,vl-clkp = <0>;
samsung,vl-oep = <0>;
samsung,vl-hsp = <1>;
samsung,vl-vsp = <1>;
samsung,vl-dp = <1>;
samsung,vl-bpix = <4>;
samsung,vl-hspw = <5>;
samsung,vl-hbpd = <10>;
samsung,vl-hfpd = <10>;
samsung,vl-vspw = <2>;
samsung,vl-vbpd = <1>;
samsung,vl-vfpd = <13>;
samsung,vl-cmd-allow-len = <0xf>;
samsung,winid = <3>;
samsung,power-on-delay = <30>;
samsung,interface-mode = <1>;
samsung,mipi-enabled = <1>;
samsung,dp-enabled;
samsung,dual-lcd-enabled;
samsung,logo-on = <1>;
samsung,resolution = <0>;
samsung,rgb-mode = <0>;
};
mipidsi@11c80000 {
compatible = "samsung,exynos-mipi-dsi";
reg = <0x11c80000 0x5c>;
samsung,dsim-config-e-interface = <1>;
samsung,dsim-config-e-virtual-ch = <0>;
samsung,dsim-config-e-pixel-format = <7>;
samsung,dsim-config-e-burst-mode = <1>;
samsung,dsim-config-e-no-data-lane = <3>;
samsung,dsim-config-e-byte-clk = <0>;
samsung,dsim-config-hfp = <1>;
samsung,dsim-config-p = <3>;
samsung,dsim-config-m = <120>;
samsung,dsim-config-s = <1>;
samsung,dsim-config-pll-stable-time = <500>;
samsung,dsim-config-esc-clk = <20000000>;
samsung,dsim-config-stop-holding-cnt = <0x7ff>;
samsung,dsim-config-bta-timeout = <0xff>;
samsung,dsim-config-rx-timeout = <0xffff>;
samsung,dsim-device-id = <0xffffffff>;
samsung,dsim-device-bus-id = <0>;
samsung,dsim-device-reverse-panel = <1>;
};
i2c_fg: fuel-gauge {
compatible = "i2c-gpio";
gpios = <&gpy4 1 0>, /* sda */
<&gpy4 0 0>; /* scl */
i2c-gpio,delay-us = <2>; /* ~100 kHz */
status = "okay";
};
};
&i2c_5 {
clock-frequency = <100000>;
status = "okay";
max8997-pmic@66 {
compatible = "maxim,max8997";
reg = <0x66 0 0>;
voltage-regulators {
valive_reg: LDO2 {
regulator-name = "VALIVE_1.1V_C210";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vusb_reg: LDO3 {
regulator-name = "VUSB_1.1V_C210";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
};
vmipi_reg: LDO4 {
regulator-name = "VMIPI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vpda_reg: LDO6 {
regulator-name = "VCC_1.8V_PDA";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
vcam_reg: LDO7 {
regulator-name = "CAM_ISP_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vusbdac_reg: LDO8 {
regulator-name = "VUSB+VDAC_3.3V_C210";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vccpda_reg: LDO9 {
regulator-name = "VCC_2.8V_PDA";
regulator-min-microvolt = <2800000>;
regulator-max-microvolt = <2800000>;
regulator-always-on;
};
vpll_reg: LDO10 {
regulator-name = "VPLL_1.1V_C210";
regulator-min-microvolt = <1100000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
vtcam_reg: LDO12 {
regulator-name = "VT_CAM_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vcclcd_reg: LDO13 {
regulator-name = "VCC_3.3V_LCD";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
vlcd_reg: LDO15 {
regulator-name = "VLCD_2.2V";
regulator-min-microvolt = <2200000>;
regulator-max-microvolt = <2200000>;
};
camsensor_reg: LDO16 {
regulator-name = "CAM_SENSOR_IO_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
};
vddq_reg: LDO21 {
regulator-name = "VDDQ_M1M2_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
varm_breg: BUCK1 {
/*
* HACK: The real name is VARM_1.2V_C210,
* but exynos-cpufreq does not support
* DT-based regulator lookup yet.
*/
regulator-name = "vdd_arm";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1350000>;
regulator-always-on;
};
vint_breg: BUCK2 {
regulator-name = "VINT_1.1V_C210";
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1100000>;
regulator-always-on;
};
camisp_breg: BUCK4 {
regulator-name = "CAM_ISP_CORE_1.2V";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
};
vmem_breg: BUCK5 {
regulator-name = "VMEM_1.2V_C210";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
vccsub_breg: BUCK7 {
regulator-name = "VCC_SUB_2.0V";
regulator-min-microvolt = <2000000>;
regulator-max-microvolt = <2000000>;
regulator-always-on;
};
safe1_sreg: ESAFEOUT1 {
regulator-name = "SAFEOUT1";
};
safe2_sreg: ESAFEOUT2 {
regulator-name = "SAFEOUT2";
regulator-boot-on;
};
};
};
};
&sdhci0 {
samsung,bus-width = <8>;
samsung,timing = <1 3 3>;
pwr-gpios = <&gpk0 2 0>;
status = "okay";
};
&sdhci2 {
samsung,bus-width = <4>;
samsung,timing = <1 2 3>;
cd-gpios = <&gpx3 4 0>;
status = "okay";
};
Reference in a new issue View git blame Copy permalink