mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 16:39:35 +00:00
780f13a9e1
The U-Boot Design Principles[1] clearly say: Initialize devices only when they are needed within U-Boot, i.e. don't initialize the Ethernet interface(s) unless U-Boot performs a download over Ethernet; don't initialize any IDE or USB devices unless U-Boot actually tries to load files from these, etc. (and don't forget to shut down these devices after using them - otherwise nasty things may happen when you try to boot your OS). So, do not initialize and read the sensors on startup. Signed-off-by: Heiko Schocher <hs@denx.de> cc: Wolfgang Denk <wd@denx.de> cc: Holger Brunck <holger.brunck@keymile.com>
83 lines
1.9 KiB
C
83 lines
1.9 KiB
C
/*
|
|
* (C) Copyright 2008
|
|
* Ricado Ribalda-Universidad Autonoma de Madrid, ricardo.ribalda@uam.es
|
|
* This work has been supported by: QTechnology http://qtec.com/
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <i2c.h>
|
|
#include <dtt.h>
|
|
|
|
#define ADT7460_ADDRESS 0x2c
|
|
#define ADT7460_INVALID 128
|
|
#define ADT7460_CONFIG 0x40
|
|
#define ADT7460_REM1_TEMP 0x25
|
|
#define ADT7460_LOCAL_TEMP 0x26
|
|
#define ADT7460_REM2_TEMP 0x27
|
|
|
|
int dtt_read(int sensor, int reg)
|
|
{
|
|
u8 dir = reg;
|
|
u8 data;
|
|
|
|
if (i2c_read(ADT7460_ADDRESS, dir, 1, &data, 1) == -1)
|
|
return -1;
|
|
if (data == ADT7460_INVALID)
|
|
return -1;
|
|
|
|
return data;
|
|
}
|
|
|
|
int dtt_write(int sensor, int reg, int val)
|
|
{
|
|
u8 dir = reg;
|
|
u8 data = val;
|
|
|
|
if (i2c_write(ADT7460_ADDRESS, dir, 1, &data, 1) == -1)
|
|
return -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dtt_init_one(int sensor)
|
|
{
|
|
printf("ADT7460 at I2C address 0x%2x\n", ADT7460_ADDRESS);
|
|
|
|
if (dtt_write(0, ADT7460_CONFIG, 1) == -1) {
|
|
puts("Error initialiting ADT7460\n");
|
|
return -1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
int dtt_get_temp(int sensor)
|
|
{
|
|
int aux;
|
|
u8 table[] =
|
|
{ ADT7460_REM1_TEMP, ADT7460_LOCAL_TEMP, ADT7460_REM2_TEMP };
|
|
|
|
if (sensor > 2) {
|
|
puts("DTT sensor does not exist\n");
|
|
return -1;
|
|
}
|
|
|
|
aux = dtt_read(0, table[sensor]);
|
|
if (aux == -1) {
|
|
puts("DTT temperature read failed\n");
|
|
return -1;
|
|
}
|
|
|
|
return aux;
|
|
}
|