u-boot/cpu/mpc8260/cpu_init.c
Heiko Schocher 07e82cb2e2 [PATCH] TQM8272: dont change the bits given from the HRCW
for the SIUMCR and BCR Register.
                 Fix the calculation for the EEprom Size

Signed-off-by: Heiko Schocher <hs@denx.de>
2007-03-21 08:45:17 +01:00

292 lines
7.4 KiB
C
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

/*
* (C) Copyright 2000-2002
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <mpc8260.h>
#include <asm/cpm_8260.h>
#include <ioports.h>
DECLARE_GLOBAL_DATA_PTR;
#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
extern unsigned long board_get_cpu_clk_f (void);
#endif
static void config_8260_ioports (volatile immap_t * immr)
{
int portnum;
for (portnum = 0; portnum < 4; portnum++) {
uint pmsk = 0,
ppar = 0,
psor = 0,
pdir = 0,
podr = 0,
pdat = 0;
iop_conf_t *iopc = (iop_conf_t *) & iop_conf_tab[portnum][0];
iop_conf_t *eiopc = iopc + 32;
uint msk = 1;
/*
* NOTE:
* index 0 refers to pin 31,
* index 31 refers to pin 0
*/
while (iopc < eiopc) {
if (iopc->conf) {
pmsk |= msk;
if (iopc->ppar)
ppar |= msk;
if (iopc->psor)
psor |= msk;
if (iopc->pdir)
pdir |= msk;
if (iopc->podr)
podr |= msk;
if (iopc->pdat)
pdat |= msk;
}
msk <<= 1;
iopc++;
}
if (pmsk != 0) {
volatile ioport_t *iop = ioport_addr (immr, portnum);
uint tpmsk = ~pmsk;
/*
* the (somewhat confused) paragraph at the
* bottom of page 35-5 warns that there might
* be "unknown behaviour" when programming
* PSORx and PDIRx, if PPARx = 1, so I
* decided this meant I had to disable the
* dedicated function first, and enable it
* last.
*/
iop->ppar &= tpmsk;
iop->psor = (iop->psor & tpmsk) | psor;
iop->podr = (iop->podr & tpmsk) | podr;
iop->pdat = (iop->pdat & tpmsk) | pdat;
iop->pdir = (iop->pdir & tpmsk) | pdir;
iop->ppar |= ppar;
}
}
}
#define SET_VAL_MASK(a, b, mask) ((a & mask) | (b & ~mask))
/*
* Breath some life into the CPU...
*
* Set up the memory map,
* initialize a bunch of registers,
* initialize the UPM's
*/
void cpu_init_f (volatile immap_t * immr)
{
#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
uint sccr;
#endif
#if defined(CONFIG_BOARD_GET_CPU_CLK_F)
unsigned long cpu_clk;
#endif
volatile memctl8260_t *memctl = &immr->im_memctl;
extern void m8260_cpm_reset (void);
/* Pointer is writable since we allocated a register for it */
gd = (gd_t *) (CFG_INIT_RAM_ADDR + CFG_GBL_DATA_OFFSET);
/* Clear initial global data */
memset ((void *) gd, 0, sizeof (gd_t));
/* RSR - Reset Status Register - clear all status (5-4) */
gd->reset_status = immr->im_clkrst.car_rsr;
immr->im_clkrst.car_rsr = RSR_ALLBITS;
/* RMR - Reset Mode Register - contains checkstop reset enable (5-5) */
immr->im_clkrst.car_rmr = CFG_RMR;
/* BCR - Bus Configuration Register (4-25) */
#if defined(CFG_BCR_60x) && (CFG_BCR_SINGLE)
if (immr->im_siu_conf.sc_bcr & BCR_EBM) {
immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_60x, 0x80000010);
} else {
immr->im_siu_conf.sc_bcr = SET_VAL_MASK(immr->im_siu_conf.sc_bcr, CFG_BCR_SINGLE, 0x80000010);
}
#else
immr->im_siu_conf.sc_bcr = CFG_BCR;
#endif
/* SIUMCR - contains debug pin configuration (4-31) */
#if defined(CFG_SIUMCR_LOW) && (CFG_SIUMCR_HIGH)
cpu_clk = board_get_cpu_clk_f ();
if (cpu_clk >= 100000000) {
immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_HIGH, 0x9f3cc000);
} else {
immr->im_siu_conf.sc_siumcr = SET_VAL_MASK(immr->im_siu_conf.sc_siumcr, CFG_SIUMCR_LOW, 0x9f3cc000);
}
#else
immr->im_siu_conf.sc_siumcr = CFG_SIUMCR;
#endif
config_8260_ioports (immr);
/* initialize time counter status and control register (4-40) */
immr->im_sit.sit_tmcntsc = CFG_TMCNTSC;
/* initialize the PIT (4-42) */
immr->im_sit.sit_piscr = CFG_PISCR;
#if !defined(CONFIG_COGENT) /* done in start.S for the cogent */
/* System clock control register (9-8) */
sccr = immr->im_clkrst.car_sccr &
(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK);
immr->im_clkrst.car_sccr = sccr |
(CFG_SCCR & ~(SCCR_PCI_MODE | SCCR_PCI_MODCK | SCCR_PCIDF_MSK) );
#endif /* !CONFIG_COGENT */
/*
* Memory Controller:
*/
/* Map banks 0 and 1 to the FLASH banks 0 and 1 at preliminary
* addresses - these have to be modified later when FLASH size
* has been determined
*/
#if defined(CFG_OR0_REMAP)
memctl->memc_or0 = CFG_OR0_REMAP;
#endif
#if defined(CFG_OR1_REMAP)
memctl->memc_or1 = CFG_OR1_REMAP;
#endif
/* now restrict to preliminary range */
/* the PS came from the HRCW, don´t change it */
memctl->memc_br0 = SET_VAL_MASK(memctl->memc_br0 , CFG_BR0_PRELIM, BRx_PS_MSK);
memctl->memc_or0 = CFG_OR0_PRELIM;
#if defined(CFG_BR1_PRELIM) && defined(CFG_OR1_PRELIM)
memctl->memc_or1 = CFG_OR1_PRELIM;
memctl->memc_br1 = CFG_BR1_PRELIM;
#endif
#if defined(CFG_BR2_PRELIM) && defined(CFG_OR2_PRELIM)
memctl->memc_or2 = CFG_OR2_PRELIM;
memctl->memc_br2 = CFG_BR2_PRELIM;
#endif
#if defined(CFG_BR3_PRELIM) && defined(CFG_OR3_PRELIM)
memctl->memc_or3 = CFG_OR3_PRELIM;
memctl->memc_br3 = CFG_BR3_PRELIM;
#endif
#if defined(CFG_BR4_PRELIM) && defined(CFG_OR4_PRELIM)
memctl->memc_or4 = CFG_OR4_PRELIM;
memctl->memc_br4 = CFG_BR4_PRELIM;
#endif
#if defined(CFG_BR5_PRELIM) && defined(CFG_OR5_PRELIM)
memctl->memc_or5 = CFG_OR5_PRELIM;
memctl->memc_br5 = CFG_BR5_PRELIM;
#endif
#if defined(CFG_BR6_PRELIM) && defined(CFG_OR6_PRELIM)
memctl->memc_or6 = CFG_OR6_PRELIM;
memctl->memc_br6 = CFG_BR6_PRELIM;
#endif
#if defined(CFG_BR7_PRELIM) && defined(CFG_OR7_PRELIM)
memctl->memc_or7 = CFG_OR7_PRELIM;
memctl->memc_br7 = CFG_BR7_PRELIM;
#endif
#if defined(CFG_BR8_PRELIM) && defined(CFG_OR8_PRELIM)
memctl->memc_or8 = CFG_OR8_PRELIM;
memctl->memc_br8 = CFG_BR8_PRELIM;
#endif
#if defined(CFG_BR9_PRELIM) && defined(CFG_OR9_PRELIM)
memctl->memc_or9 = CFG_OR9_PRELIM;
memctl->memc_br9 = CFG_BR9_PRELIM;
#endif
#if defined(CFG_BR10_PRELIM) && defined(CFG_OR10_PRELIM)
memctl->memc_or10 = CFG_OR10_PRELIM;
memctl->memc_br10 = CFG_BR10_PRELIM;
#endif
#if defined(CFG_BR11_PRELIM) && defined(CFG_OR11_PRELIM)
memctl->memc_or11 = CFG_OR11_PRELIM;
memctl->memc_br11 = CFG_BR11_PRELIM;
#endif
m8260_cpm_reset ();
}
/*
* initialize higher level parts of CPU like time base and timers
*/
int cpu_init_r (void)
{
volatile immap_t *immr = (immap_t *) gd->bd->bi_immr_base;
immr->im_cpm.cp_rccr = CFG_RCCR;
return (0);
}
/*
* print out the reason for the reset
*/
int prt_8260_rsr (void)
{
static struct {
ulong mask;
char *desc;
} bits[] = {
{
RSR_JTRS, "JTAG"}, {
RSR_CSRS, "Check Stop"}, {
RSR_SWRS, "Software Watchdog"}, {
RSR_BMRS, "Bus Monitor"}, {
RSR_ESRS, "External Soft"}, {
RSR_EHRS, "External Hard"}
};
static int n = sizeof bits / sizeof bits[0];
ulong rsr = gd->reset_status;
int i;
char *sep;
puts (CPU_ID_STR " Reset Status:");
sep = " ";
for (i = 0; i < n; i++)
if (rsr & bits[i].mask) {
printf ("%s%s", sep, bits[i].desc);
sep = ", ";
}
puts ("\n\n");
return (0);
}