u-boot/include/asm-blackfin/blackfin_local.h
Mike Frysinger 40599239e7 Blackfin: cache core/system clock values
Calculating the clocks requires a bit of calls to gcc math functions, so
cache the values after the first run since they'll most likely never
change once U-Boot is up and running.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
2009-02-02 12:24:42 -05:00

217 lines
5.1 KiB
C

/*
* U-boot - blackfin_local.h
*
* Copyright (c) 2005-2007 Analog Devices Inc.
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
* MA 02110-1301 USA
*/
#ifndef __BLACKFIN_LOCAL_H__
#define __BLACKFIN_LOCAL_H__
#define LO(con32) ((con32) & 0xFFFF)
#define lo(con32) ((con32) & 0xFFFF)
#define HI(con32) (((con32) >> 16) & 0xFFFF)
#define hi(con32) (((con32) >> 16) & 0xFFFF)
#define OFFSET_(x) (x & 0x0000FFFF)
#define MK_BMSK_(x) (1 << x)
/* Ideally this should be USEC not MSEC, but the USEC multiplication
* likes to overflow 32bit quantities which is all our assembler
* currently supports ;(
*/
#define USEC_PER_MSEC 1000
#define MSEC_PER_SEC 1000
#define BFIN_SCLK (100000000)
#define SCLK_TO_MSEC(sclk) ((MSEC_PER_SEC * ((sclk) / USEC_PER_MSEC)) / (BFIN_SCLK / USEC_PER_MSEC))
#define MSEC_TO_SCLK(msec) ((((BFIN_SCLK / USEC_PER_MSEC) * (msec)) / MSEC_PER_SEC) * USEC_PER_MSEC)
#include <asm/linkage.h>
#ifndef __ASSEMBLY__
# ifdef SHARED_RESOURCES
# include <asm/shared_resources.h>
# endif
# include <linux/types.h>
extern u_long get_vco(void);
extern u_long get_cclk(void);
extern u_long get_sclk(void);
# define bfin_revid() (*pCHIPID >> 28)
extern void blackfin_icache_flush_range(const void *, const void *);
extern void blackfin_dcache_flush_range(const void *, const void *);
extern void blackfin_dcache_flush_invalidate_range(const void *, const void *);
/* Use DMA to move data from on chip to external memory. While this is
* required for only L1 instruction (it is not directly readable by the
* core via data loads), it isn't a huge performance issue for other
* regions (it's probably even faster than core load/stores). However,
* the DMA engine does not have access to the L1 scratchpad, and we
* cannot use DMA inside of the MMR space.
*/
# define addr_bfin_on_chip_mem(addr) \
(((unsigned long)(addr) >= 0xef000000 && (unsigned long)addr < SYSMMR_BASE) && \
!((unsigned long)(addr) >= L1_SRAM_SCRATCH && \
(unsigned long)(addr) < L1_SRAM_SCRATCH_END))
# include <asm/system.h>
#if ANOMALY_05000198
# define NOP_PAD_ANOMALY_05000198 "nop;"
#else
# define NOP_PAD_ANOMALY_05000198
#endif
#define bfin_read8(addr) ({ \
uint8_t __v; \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"%0 = b[%1] (z);" \
: "=d" (__v) \
: "a" (addr) \
); \
__v; })
#define bfin_read16(addr) ({ \
uint16_t __v; \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"%0 = w[%1] (z);" \
: "=d" (__v) \
: "a" (addr) \
); \
__v; })
#define bfin_read32(addr) ({ \
uint32_t __v; \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"%0 = [%1];" \
: "=d" (__v) \
: "a" (addr) \
); \
__v; })
#define bfin_readPTR(addr) bfin_read32(addr)
#define bfin_write8(addr, val) \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"b[%0] = %1;" \
: \
: "a" (addr), "d" (val) \
: "memory" \
)
#define bfin_write16(addr, val) \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"w[%0] = %1;" \
: \
: "a" (addr), "d" (val) \
: "memory" \
)
#define bfin_write32(addr, val) \
__asm__ __volatile__( \
NOP_PAD_ANOMALY_05000198 \
"[%0] = %1;" \
: \
: "a" (addr), "d" (val) \
: "memory" \
)
#define bfin_writePTR(addr, val) bfin_write32(addr, val)
/* SSYNC implementation for C file */
static inline void SSYNC(void)
{
int _tmp;
if (ANOMALY_05000312)
__asm__ __volatile__(
"cli %0;"
"nop;"
"nop;"
"ssync;"
"sti %0;"
: "=d" (_tmp)
);
else if (ANOMALY_05000244)
__asm__ __volatile__(
"nop;"
"nop;"
"nop;"
"ssync;"
);
else
__asm__ __volatile__("ssync;");
}
/* CSYNC implementation for C file */
static inline void CSYNC(void)
{
int _tmp;
if (ANOMALY_05000312)
__asm__ __volatile__(
"cli %0;"
"nop;"
"nop;"
"csync;"
"sti %0;"
: "=d" (_tmp)
);
else if (ANOMALY_05000244)
__asm__ __volatile__(
"nop;"
"nop;"
"nop;"
"csync;"
);
else
__asm__ __volatile__("csync;");
}
#else /* __ASSEMBLY__ */
/* SSYNC & CSYNC implementations for assembly files */
#define ssync(x) SSYNC(x)
#define csync(x) CSYNC(x)
#if ANOMALY_05000312
#define SSYNC(scratch) cli scratch; nop; nop; SSYNC; sti scratch;
#define CSYNC(scratch) cli scratch; nop; nop; CSYNC; sti scratch;
#elif ANOMALY_05000244
#define SSYNC(scratch) nop; nop; nop; SSYNC;
#define CSYNC(scratch) nop; nop; nop; CSYNC;
#else
#define SSYNC(scratch) SSYNC;
#define CSYNC(scratch) CSYNC;
#endif /* ANOMALY_05000312 & ANOMALY_05000244 handling */
#endif /* __ASSEMBLY__ */
#endif