mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-13 06:42:56 +00:00
c7cb17e892
HSYNC is bit 8, and VSYNC is bit 9. Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com> Reviewed-by: Jernej Skrabec <jernej.skrabec@siol.net>
384 lines
9.3 KiB
C
384 lines
9.3 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Allwinner DW HDMI bridge
|
|
*
|
|
* (C) Copyright 2017 Jernej Skrabec <jernej.skrabec@siol.net>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <display.h>
|
|
#include <dm.h>
|
|
#include <dw_hdmi.h>
|
|
#include <edid.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch/clock.h>
|
|
#include <asm/arch/lcdc.h>
|
|
|
|
struct sunxi_dw_hdmi_priv {
|
|
struct dw_hdmi hdmi;
|
|
int mux;
|
|
};
|
|
|
|
struct sunxi_hdmi_phy {
|
|
u32 pol;
|
|
u32 res1[3];
|
|
u32 read_en;
|
|
u32 unscramble;
|
|
u32 res2[2];
|
|
u32 ctrl;
|
|
u32 unk1;
|
|
u32 unk2;
|
|
u32 pll;
|
|
u32 clk;
|
|
u32 unk3;
|
|
u32 status;
|
|
};
|
|
|
|
#define HDMI_PHY_OFFS 0x10000
|
|
|
|
static int sunxi_dw_hdmi_get_divider(uint clock)
|
|
{
|
|
/*
|
|
* Due to missing documentaion of HDMI PHY, we know correct
|
|
* settings only for following four PHY dividers. Select one
|
|
* based on clock speed.
|
|
*/
|
|
if (clock <= 27000000)
|
|
return 11;
|
|
else if (clock <= 74250000)
|
|
return 4;
|
|
else if (clock <= 148500000)
|
|
return 2;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
static void sunxi_dw_hdmi_phy_init(void)
|
|
{
|
|
struct sunxi_hdmi_phy * const phy =
|
|
(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
|
|
unsigned long tmo;
|
|
u32 tmp;
|
|
|
|
/*
|
|
* HDMI PHY settings are taken as-is from Allwinner BSP code.
|
|
* There is no documentation.
|
|
*/
|
|
writel(0, &phy->ctrl);
|
|
setbits_le32(&phy->ctrl, BIT(0));
|
|
udelay(5);
|
|
setbits_le32(&phy->ctrl, BIT(16));
|
|
setbits_le32(&phy->ctrl, BIT(1));
|
|
udelay(10);
|
|
setbits_le32(&phy->ctrl, BIT(2));
|
|
udelay(5);
|
|
setbits_le32(&phy->ctrl, BIT(3));
|
|
udelay(40);
|
|
setbits_le32(&phy->ctrl, BIT(19));
|
|
udelay(100);
|
|
setbits_le32(&phy->ctrl, BIT(18));
|
|
setbits_le32(&phy->ctrl, 7 << 4);
|
|
|
|
/* Note that Allwinner code doesn't fail in case of timeout */
|
|
tmo = timer_get_us() + 2000;
|
|
while ((readl(&phy->status) & 0x80) == 0) {
|
|
if (timer_get_us() > tmo) {
|
|
printf("Warning: HDMI PHY init timeout!\n");
|
|
break;
|
|
}
|
|
}
|
|
|
|
setbits_le32(&phy->ctrl, 0xf << 8);
|
|
setbits_le32(&phy->ctrl, BIT(7));
|
|
|
|
writel(0x39dc5040, &phy->pll);
|
|
writel(0x80084343, &phy->clk);
|
|
udelay(10000);
|
|
writel(1, &phy->unk3);
|
|
setbits_le32(&phy->pll, BIT(25));
|
|
udelay(100000);
|
|
tmp = (readl(&phy->status) & 0x1f800) >> 11;
|
|
setbits_le32(&phy->pll, BIT(31) | BIT(30));
|
|
setbits_le32(&phy->pll, tmp);
|
|
writel(0x01FF0F7F, &phy->ctrl);
|
|
writel(0x80639000, &phy->unk1);
|
|
writel(0x0F81C405, &phy->unk2);
|
|
|
|
/* enable read access to HDMI controller */
|
|
writel(0x54524545, &phy->read_en);
|
|
/* descramble register offsets */
|
|
writel(0x42494E47, &phy->unscramble);
|
|
}
|
|
|
|
static int sunxi_dw_hdmi_get_plug_in_status(void)
|
|
{
|
|
struct sunxi_hdmi_phy * const phy =
|
|
(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
|
|
|
|
return !!(readl(&phy->status) & (1 << 19));
|
|
}
|
|
|
|
static int sunxi_dw_hdmi_wait_for_hpd(void)
|
|
{
|
|
ulong start;
|
|
|
|
start = get_timer(0);
|
|
do {
|
|
if (sunxi_dw_hdmi_get_plug_in_status())
|
|
return 0;
|
|
udelay(100);
|
|
} while (get_timer(start) < 300);
|
|
|
|
return -1;
|
|
}
|
|
|
|
static void sunxi_dw_hdmi_phy_set(uint clock)
|
|
{
|
|
struct sunxi_hdmi_phy * const phy =
|
|
(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
|
|
int div = sunxi_dw_hdmi_get_divider(clock);
|
|
u32 tmp;
|
|
|
|
/*
|
|
* Unfortunately, we don't know much about those magic
|
|
* numbers. They are taken from Allwinner BSP driver.
|
|
*/
|
|
switch (div) {
|
|
case 1:
|
|
writel(0x30dc5fc0, &phy->pll);
|
|
writel(0x800863C0, &phy->clk);
|
|
mdelay(10);
|
|
writel(0x00000001, &phy->unk3);
|
|
setbits_le32(&phy->pll, BIT(25));
|
|
mdelay(200);
|
|
tmp = (readl(&phy->status) & 0x1f800) >> 11;
|
|
setbits_le32(&phy->pll, BIT(31) | BIT(30));
|
|
if (tmp < 0x3d)
|
|
setbits_le32(&phy->pll, tmp + 2);
|
|
else
|
|
setbits_le32(&phy->pll, 0x3f);
|
|
mdelay(100);
|
|
writel(0x01FFFF7F, &phy->ctrl);
|
|
writel(0x8063b000, &phy->unk1);
|
|
writel(0x0F8246B5, &phy->unk2);
|
|
break;
|
|
case 2:
|
|
writel(0x39dc5040, &phy->pll);
|
|
writel(0x80084381, &phy->clk);
|
|
mdelay(10);
|
|
writel(0x00000001, &phy->unk3);
|
|
setbits_le32(&phy->pll, BIT(25));
|
|
mdelay(100);
|
|
tmp = (readl(&phy->status) & 0x1f800) >> 11;
|
|
setbits_le32(&phy->pll, BIT(31) | BIT(30));
|
|
setbits_le32(&phy->pll, tmp);
|
|
writel(0x01FFFF7F, &phy->ctrl);
|
|
writel(0x8063a800, &phy->unk1);
|
|
writel(0x0F81C485, &phy->unk2);
|
|
break;
|
|
case 4:
|
|
writel(0x39dc5040, &phy->pll);
|
|
writel(0x80084343, &phy->clk);
|
|
mdelay(10);
|
|
writel(0x00000001, &phy->unk3);
|
|
setbits_le32(&phy->pll, BIT(25));
|
|
mdelay(100);
|
|
tmp = (readl(&phy->status) & 0x1f800) >> 11;
|
|
setbits_le32(&phy->pll, BIT(31) | BIT(30));
|
|
setbits_le32(&phy->pll, tmp);
|
|
writel(0x01FFFF7F, &phy->ctrl);
|
|
writel(0x8063b000, &phy->unk1);
|
|
writel(0x0F81C405, &phy->unk2);
|
|
break;
|
|
case 11:
|
|
writel(0x39dc5040, &phy->pll);
|
|
writel(0x8008430a, &phy->clk);
|
|
mdelay(10);
|
|
writel(0x00000001, &phy->unk3);
|
|
setbits_le32(&phy->pll, BIT(25));
|
|
mdelay(100);
|
|
tmp = (readl(&phy->status) & 0x1f800) >> 11;
|
|
setbits_le32(&phy->pll, BIT(31) | BIT(30));
|
|
setbits_le32(&phy->pll, tmp);
|
|
writel(0x01FFFF7F, &phy->ctrl);
|
|
writel(0x8063b000, &phy->unk1);
|
|
writel(0x0F81C405, &phy->unk2);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void sunxi_dw_hdmi_pll_set(uint clk_khz)
|
|
{
|
|
int value, n, m, div = 0, diff;
|
|
int best_n = 0, best_m = 0, best_diff = 0x0FFFFFFF;
|
|
|
|
div = sunxi_dw_hdmi_get_divider(clk_khz * 1000);
|
|
|
|
/*
|
|
* Find the lowest divider resulting in a matching clock. If there
|
|
* is no match, pick the closest lower clock, as monitors tend to
|
|
* not sync to higher frequencies.
|
|
*/
|
|
for (m = 1; m <= 16; m++) {
|
|
n = (m * div * clk_khz) / 24000;
|
|
|
|
if ((n >= 1) && (n <= 128)) {
|
|
value = (24000 * n) / m / div;
|
|
diff = clk_khz - value;
|
|
if (diff < best_diff) {
|
|
best_diff = diff;
|
|
best_m = m;
|
|
best_n = n;
|
|
}
|
|
}
|
|
}
|
|
|
|
clock_set_pll3_factors(best_m, best_n);
|
|
debug("dotclock: %dkHz = %dkHz: (24MHz * %d) / %d / %d\n",
|
|
clk_khz, (clock_get_pll3() / 1000) / div,
|
|
best_n, best_m, div);
|
|
}
|
|
|
|
static void sunxi_dw_hdmi_lcdc_init(int mux, const struct display_timing *edid,
|
|
int bpp)
|
|
{
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
int div = sunxi_dw_hdmi_get_divider(edid->pixelclock.typ);
|
|
struct sunxi_lcdc_reg *lcdc;
|
|
|
|
if (mux == 0) {
|
|
lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD0_BASE;
|
|
|
|
/* Reset off */
|
|
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD0);
|
|
|
|
/* Clock on */
|
|
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD0);
|
|
writel(CCM_LCD0_CTRL_GATE | CCM_LCD0_CTRL_M(div),
|
|
&ccm->lcd0_clk_cfg);
|
|
} else {
|
|
lcdc = (struct sunxi_lcdc_reg *)SUNXI_LCD1_BASE;
|
|
|
|
/* Reset off */
|
|
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_LCD1);
|
|
|
|
/* Clock on */
|
|
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_LCD1);
|
|
writel(CCM_LCD1_CTRL_GATE | CCM_LCD1_CTRL_M(div),
|
|
&ccm->lcd1_clk_cfg);
|
|
}
|
|
|
|
lcdc_init(lcdc);
|
|
lcdc_tcon1_mode_set(lcdc, edid, false, false);
|
|
lcdc_enable(lcdc, bpp);
|
|
}
|
|
|
|
static int sunxi_dw_hdmi_phy_cfg(struct dw_hdmi *hdmi, uint mpixelclock)
|
|
{
|
|
sunxi_dw_hdmi_pll_set(mpixelclock/1000);
|
|
sunxi_dw_hdmi_phy_set(mpixelclock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_dw_hdmi_read_edid(struct udevice *dev, u8 *buf, int buf_size)
|
|
{
|
|
struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
|
|
|
|
return dw_hdmi_read_edid(&priv->hdmi, buf, buf_size);
|
|
}
|
|
|
|
static int sunxi_dw_hdmi_enable(struct udevice *dev, int panel_bpp,
|
|
const struct display_timing *edid)
|
|
{
|
|
struct sunxi_hdmi_phy * const phy =
|
|
(struct sunxi_hdmi_phy *)(SUNXI_HDMI_BASE + HDMI_PHY_OFFS);
|
|
struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = dw_hdmi_enable(&priv->hdmi, edid);
|
|
if (ret)
|
|
return ret;
|
|
|
|
sunxi_dw_hdmi_lcdc_init(priv->mux, edid, panel_bpp);
|
|
|
|
if (edid->flags & DISPLAY_FLAGS_VSYNC_LOW)
|
|
setbits_le32(&phy->pol, 0x200);
|
|
|
|
if (edid->flags & DISPLAY_FLAGS_HSYNC_LOW)
|
|
setbits_le32(&phy->pol, 0x100);
|
|
|
|
setbits_le32(&phy->ctrl, 0xf << 12);
|
|
|
|
/*
|
|
* This is last hdmi access before boot, so scramble addresses
|
|
* again or othwerwise BSP driver won't work. Dummy read is
|
|
* needed or otherwise last write doesn't get written correctly.
|
|
*/
|
|
(void)readb(SUNXI_HDMI_BASE);
|
|
writel(0, &phy->unscramble);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sunxi_dw_hdmi_probe(struct udevice *dev)
|
|
{
|
|
struct display_plat *uc_plat = dev_get_uclass_platdata(dev);
|
|
struct sunxi_dw_hdmi_priv *priv = dev_get_priv(dev);
|
|
struct sunxi_ccm_reg * const ccm =
|
|
(struct sunxi_ccm_reg *)SUNXI_CCM_BASE;
|
|
int ret;
|
|
|
|
/* Set pll3 to 297 MHz */
|
|
clock_set_pll3(297000000);
|
|
|
|
/* Set hdmi parent to pll3 */
|
|
clrsetbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_PLL_MASK,
|
|
CCM_HDMI_CTRL_PLL3);
|
|
|
|
/* Set ahb gating to pass */
|
|
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI);
|
|
setbits_le32(&ccm->ahb_reset1_cfg, 1 << AHB_RESET_OFFSET_HDMI2);
|
|
setbits_le32(&ccm->ahb_gate1, 1 << AHB_GATE_OFFSET_HDMI);
|
|
setbits_le32(&ccm->hdmi_slow_clk_cfg, CCM_HDMI_SLOW_CTRL_DDC_GATE);
|
|
|
|
/* Clock on */
|
|
setbits_le32(&ccm->hdmi_clk_cfg, CCM_HDMI_CTRL_GATE);
|
|
|
|
sunxi_dw_hdmi_phy_init();
|
|
|
|
ret = sunxi_dw_hdmi_wait_for_hpd();
|
|
if (ret < 0) {
|
|
debug("hdmi can not get hpd signal\n");
|
|
return -1;
|
|
}
|
|
|
|
priv->hdmi.ioaddr = SUNXI_HDMI_BASE;
|
|
priv->hdmi.i2c_clk_high = 0xd8;
|
|
priv->hdmi.i2c_clk_low = 0xfe;
|
|
priv->hdmi.reg_io_width = 1;
|
|
priv->hdmi.phy_set = sunxi_dw_hdmi_phy_cfg;
|
|
priv->mux = uc_plat->source_id;
|
|
|
|
dw_hdmi_init(&priv->hdmi);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct dm_display_ops sunxi_dw_hdmi_ops = {
|
|
.read_edid = sunxi_dw_hdmi_read_edid,
|
|
.enable = sunxi_dw_hdmi_enable,
|
|
};
|
|
|
|
U_BOOT_DRIVER(sunxi_dw_hdmi) = {
|
|
.name = "sunxi_dw_hdmi",
|
|
.id = UCLASS_DISPLAY,
|
|
.ops = &sunxi_dw_hdmi_ops,
|
|
.probe = sunxi_dw_hdmi_probe,
|
|
.priv_auto_alloc_size = sizeof(struct sunxi_dw_hdmi_priv),
|
|
};
|
|
|
|
U_BOOT_DEVICE(sunxi_dw_hdmi) = {
|
|
.name = "sunxi_dw_hdmi"
|
|
};
|