mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-12 07:57:21 +00:00
6b66d2ee47
If UHS speed modes are enabled, a compatible SD card switches down to 1.8V during enumeration. If after this a software reboot/crash takes place and on-chip ROM tries to enumerate the SD card, the difference in IO voltages (host @ 3.3V and card @ 1.8V) may end up damaging the card. The fix for this is to have support for power cycling the card in hardware (with a PORz/soft-reset line causing a power cycle of the card). Because the beaglebone X15 (rev A,B and C), am57xx-evms and am57xx-idks don't have this capability, disable voltage switching for these boards. The major effect of this is that the maximum supported speed mode is now high speed(50 MHz) down from SDR104(200 MHz). Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
476 lines
10 KiB
Text
476 lines
10 KiB
Text
/*
|
|
* Copyright (C) 2015-2016 Texas Instruments Incorporated - http://www.ti.com/
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
#include "am57xx-industrial-grade.dtsi"
|
|
|
|
/ {
|
|
aliases {
|
|
rtc0 = &tps659038_rtc;
|
|
rtc1 = &rtc;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = &uart3;
|
|
};
|
|
|
|
vmain: fixedregulator-vmain {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "VMAIN";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
v3_3d: fixedregulator-v3_3d {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "V3_3D";
|
|
vin-supply = <&smps9_reg>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
vtt_fixed: fixedregulator-vtt {
|
|
/* TPS51200 */
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "vtt_fixed";
|
|
vin-supply = <&v3_3d>;
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
leds-iio {
|
|
status = "disabled";
|
|
compatible = "gpio-leds";
|
|
led-out0 {
|
|
label = "out0";
|
|
gpios = <&tpic2810 0 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-out1 {
|
|
label = "out1";
|
|
gpios = <&tpic2810 1 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-out2 {
|
|
label = "out2";
|
|
gpios = <&tpic2810 2 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-out3 {
|
|
label = "out3";
|
|
gpios = <&tpic2810 3 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-out4 {
|
|
label = "out4";
|
|
gpios = <&tpic2810 4 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-out5 {
|
|
label = "out5";
|
|
gpios = <&tpic2810 5 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-out6 {
|
|
label = "out6";
|
|
gpios = <&tpic2810 6 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
|
|
led-out7 {
|
|
label = "out7";
|
|
gpios = <&tpic2810 7 GPIO_ACTIVE_HIGH>;
|
|
default-state = "off";
|
|
};
|
|
};
|
|
};
|
|
|
|
&dra7_pmx_core {
|
|
dcan1_pins_default: dcan1_pins_default {
|
|
pinctrl-single,pins = <
|
|
DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
|
|
DRA7XX_CORE_IOPAD(0x37d4, PIN_INPUT_PULLUP | MUX_MODE0) /* dcan1_rx */
|
|
>;
|
|
};
|
|
|
|
dcan1_pins_sleep: dcan1_pins_sleep {
|
|
pinctrl-single,pins = <
|
|
DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
|
|
DRA7XX_CORE_IOPAD(0x37d4, MUX_MODE15 | PULL_UP) /* dcan1_rx.off */
|
|
>;
|
|
};
|
|
};
|
|
|
|
&i2c1 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
|
|
tps659038: tps659038@58 {
|
|
compatible = "ti,tps659038";
|
|
reg = <0x58>;
|
|
interrupts-extended = <&gpio6 16 IRQ_TYPE_LEVEL_HIGH
|
|
&dra7_pmx_core 0x418>;
|
|
#interrupt-cells = <2>;
|
|
interrupt-controller;
|
|
ti,system-power-controller;
|
|
ti,palmas-override-powerhold;
|
|
|
|
tps659038_pmic {
|
|
compatible = "ti,tps659038-pmic";
|
|
|
|
smps12-in-supply = <&vmain>;
|
|
smps3-in-supply = <&vmain>;
|
|
smps45-in-supply = <&vmain>;
|
|
smps6-in-supply = <&vmain>;
|
|
smps7-in-supply = <&vmain>;
|
|
smps8-in-supply = <&vmain>;
|
|
smps9-in-supply = <&vmain>;
|
|
ldo1-in-supply = <&vmain>;
|
|
ldo2-in-supply = <&vmain>;
|
|
ldo3-in-supply = <&vmain>;
|
|
ldo4-in-supply = <&vmain>;
|
|
ldo9-in-supply = <&vmain>;
|
|
ldoln-in-supply = <&vmain>;
|
|
ldousb-in-supply = <&vmain>;
|
|
ldortc-in-supply = <&vmain>;
|
|
|
|
regulators {
|
|
smps12_reg: smps12 {
|
|
/* VDD_MPU */
|
|
regulator-name = "smps12";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps3_reg: smps3 {
|
|
/* VDD_DDR EMIF1 EMIF2 */
|
|
regulator-name = "smps3";
|
|
regulator-min-microvolt = <1350000>;
|
|
regulator-max-microvolt = <1350000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps45_reg: smps45 {
|
|
/* VDD_DSPEVE on AM572 */
|
|
/* VDD_IVA + VDD_DSP on AM571 */
|
|
regulator-name = "smps45";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps6_reg: smps6 {
|
|
/* VDD_GPU */
|
|
regulator-name = "smps6";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1250000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps7_reg: smps7 {
|
|
/* VDD_CORE */
|
|
regulator-name = "smps7";
|
|
regulator-min-microvolt = <850000>;
|
|
regulator-max-microvolt = <1150000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
smps8_reg: smps8 {
|
|
/* 5728 - VDD_IVAHD */
|
|
/* 5718 - N.C. test point */
|
|
regulator-name = "smps8";
|
|
};
|
|
|
|
smps9_reg: smps9 {
|
|
/* VDD_3_3D */
|
|
regulator-name = "smps9";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo1_reg: ldo1 {
|
|
/* VDDSHV8 - VSDMMC */
|
|
/* NOTE: on rev 1.3a, data supply */
|
|
regulator-name = "ldo1";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
ldo2_reg: ldo2 {
|
|
/* VDDSH18V */
|
|
regulator-name = "ldo2";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo3_reg: ldo3 {
|
|
/* R1.3a 572x V1_8PHY_LDO3: USB, SATA */
|
|
regulator-name = "ldo3";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldo4_reg: ldo4 {
|
|
/* R1.3a 572x V1_8PHY_LDO4: PCIE, HDMI*/
|
|
regulator-name = "ldo4";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
/* LDO5-8 unused */
|
|
|
|
ldo9_reg: ldo9 {
|
|
/* VDD_RTC */
|
|
regulator-name = "ldo9";
|
|
regulator-min-microvolt = <840000>;
|
|
regulator-max-microvolt = <1160000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldoln_reg: ldoln {
|
|
/* VDDA_1V8_PLL */
|
|
regulator-name = "ldoln";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldousb_reg: ldousb {
|
|
/* VDDA_3V_USB: VDDA_USBHS33 */
|
|
regulator-name = "ldousb";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
ldortc_reg: ldortc {
|
|
/* VDDA_RTC */
|
|
regulator-name = "ldortc";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-always-on;
|
|
regulator-boot-on;
|
|
};
|
|
|
|
regen1: regen1 {
|
|
/* VDD_3V3_ON */
|
|
regulator-name = "regen1";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
regen2: regen2 {
|
|
/* Needed for PMIC internal resource */
|
|
regulator-name = "regen2";
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
};
|
|
|
|
tps659038_rtc: tps659038_rtc {
|
|
compatible = "ti,palmas-rtc";
|
|
interrupt-parent = <&tps659038>;
|
|
interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
};
|
|
|
|
tps659038_pwr_button: tps659038_pwr_button {
|
|
compatible = "ti,palmas-pwrbutton";
|
|
interrupt-parent = <&tps659038>;
|
|
interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
|
|
wakeup-source;
|
|
ti,palmas-long-press-seconds = <12>;
|
|
};
|
|
|
|
tps659038_gpio: tps659038_gpio {
|
|
compatible = "ti,palmas-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
|
|
extcon_usb2: tps659038_usb {
|
|
compatible = "ti,palmas-usb-vid";
|
|
ti,enable-vbus-detection;
|
|
ti,enable-id-detection;
|
|
/* ID & VBUS GPIOs provided in board dts */
|
|
};
|
|
};
|
|
|
|
tpic2810: tpic2810@60 {
|
|
compatible = "ti,tpic2810";
|
|
reg = <0x60>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
};
|
|
};
|
|
|
|
&mcspi3 {
|
|
status = "okay";
|
|
ti,pindir-d0-out-d1-in;
|
|
|
|
sn65hvs882: sn65hvs882@0 {
|
|
compatible = "pisosr-gpio";
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
|
|
reg = <0>;
|
|
spi-max-frequency = <1000000>;
|
|
spi-cpol;
|
|
};
|
|
};
|
|
|
|
&uart3 {
|
|
status = "okay";
|
|
interrupts-extended = <&crossbar_mpu GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH
|
|
&dra7_pmx_core 0x248>;
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
ext-clk-src;
|
|
};
|
|
|
|
&mac {
|
|
status = "okay";
|
|
dual_emac;
|
|
};
|
|
|
|
&cpsw_emac0 {
|
|
phy_id = <&davinci_mdio>, <0>;
|
|
phy-mode = "rgmii";
|
|
dual_emac_res_vlan = <1>;
|
|
};
|
|
|
|
&cpsw_emac1 {
|
|
phy_id = <&davinci_mdio>, <1>;
|
|
phy-mode = "rgmii";
|
|
dual_emac_res_vlan = <2>;
|
|
};
|
|
|
|
&usb2_phy1 {
|
|
phy-supply = <&ldousb_reg>;
|
|
};
|
|
|
|
&usb2_phy2 {
|
|
phy-supply = <&ldousb_reg>;
|
|
};
|
|
|
|
&usb1 {
|
|
dr_mode = "host";
|
|
};
|
|
|
|
&usb2 {
|
|
dr_mode = "peripheral";
|
|
};
|
|
|
|
&mmc1 {
|
|
status = "okay";
|
|
vmmc-supply = <&v3_3d>;
|
|
vqmmc-supply = <&ldo1_reg>;
|
|
bus-width = <4>;
|
|
cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>; /* gpio 219 */
|
|
no-1-8-v;
|
|
};
|
|
|
|
&mmc2 {
|
|
status = "okay";
|
|
vmmc-supply = <&v3_3d>;
|
|
bus-width = <8>;
|
|
ti,non-removable;
|
|
max-frequency = <96000000>;
|
|
no-1-8-v;
|
|
/delete-property/ mmc-hs200-1_8v;
|
|
};
|
|
|
|
&dcan1 {
|
|
status = "okay";
|
|
pinctrl-names = "default", "sleep", "active";
|
|
pinctrl-0 = <&dcan1_pins_sleep>;
|
|
pinctrl-1 = <&dcan1_pins_sleep>;
|
|
pinctrl-2 = <&dcan1_pins_default>;
|
|
};
|
|
|
|
&qspi {
|
|
status = "okay";
|
|
|
|
spi-max-frequency = <76800000>;
|
|
m25p80@0 {
|
|
compatible = "s25fl256s1", "jedec,spi-nor";
|
|
spi-max-frequency = <76800000>;
|
|
reg = <0>;
|
|
spi-tx-bus-width = <1>;
|
|
spi-rx-bus-width = <4>;
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
/* MTD partition table.
|
|
* The ROM checks the first four physical blocks
|
|
* for a valid file to boot and the flash here is
|
|
* 64KiB block size.
|
|
*/
|
|
partition@0 {
|
|
label = "QSPI.SPL";
|
|
reg = <0x00000000 0x000040000>;
|
|
};
|
|
partition@1 {
|
|
label = "QSPI.u-boot";
|
|
reg = <0x00040000 0x00100000>;
|
|
};
|
|
partition@2 {
|
|
label = "QSPI.u-boot-spl-os";
|
|
reg = <0x00140000 0x00080000>;
|
|
};
|
|
partition@3 {
|
|
label = "QSPI.u-boot-env";
|
|
reg = <0x001c0000 0x00010000>;
|
|
};
|
|
partition@4 {
|
|
label = "QSPI.u-boot-env.backup1";
|
|
reg = <0x001d0000 0x0010000>;
|
|
};
|
|
partition@5 {
|
|
label = "QSPI.kernel";
|
|
reg = <0x001e0000 0x0800000>;
|
|
};
|
|
partition@6 {
|
|
label = "QSPI.file-system";
|
|
reg = <0x009e0000 0x01620000>;
|
|
};
|
|
};
|
|
};
|