u-boot/arch/arm/mach-aspeed/ast2600/board_common.c
Simon Glass 401d1c4f5d common: Drop asm/global_data.h from common header
Move this out of the common header and include it only where needed.  In
a number of cases this requires adding "struct udevice;" to avoid adding
another large header or in other cases replacing / adding missing header
files that had been pulled in, very indirectly.   Finally, we have a few
cases where we did not need to include <asm/global_data.h> at all, so
remove that include.

Signed-off-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Rini <trini@konsulko.com>
2021-02-02 15:33:42 -05:00

106 lines
2.2 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright (c) Aspeed Technology Inc.
*/
#include <common.h>
#include <dm.h>
#include <ram.h>
#include <timer.h>
#include <asm/io.h>
#include <asm/arch/timer.h>
#include <linux/bitops.h>
#include <linux/err.h>
#include <dm/uclass.h>
#include <asm/arch/scu_ast2600.h>
#include <asm/global_data.h>
DECLARE_GLOBAL_DATA_PTR;
/* Memory Control registers */
#define MCR_BASE 0x1e6e0000
#define MCR_CONF (MCR_BASE + 0x004)
/* bit fields of MCR_CONF */
#define MCR_CONF_ECC_EN BIT(7)
#define MCR_CONF_VGA_MEMSZ_MASK GENMASK(3, 2)
#define MCR_CONF_VGA_MEMSZ_SHIFT 2
#define MCR_CONF_MEMSZ_MASK GENMASK(1, 0)
#define MCR_CONF_MEMSZ_SHIFT 0
int dram_init(void)
{
int ret;
struct udevice *dev;
struct ram_info ram;
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
if (ret) {
debug("cannot get DRAM driver\n");
return ret;
}
ret = ram_get_info(dev, &ram);
if (ret) {
debug("cannot get DRAM information\n");
return ret;
}
gd->ram_size = ram.size;
return 0;
}
int board_init(void)
{
int i = 0, rc;
struct udevice *dev;
gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
while (1) {
rc = uclass_get_device(UCLASS_MISC, i++, &dev);
if (rc)
break;
}
return 0;
}
void board_add_ram_info(int use_default)
{
int rc;
uint32_t conf;
uint32_t ecc, act_size, vga_rsvd;
struct udevice *scu_dev;
struct ast2600_scu *scu;
rc = uclass_get_device_by_driver(UCLASS_CLK,
DM_DRIVER_GET(aspeed_ast2600_scu), &scu_dev);
if (rc) {
debug("%s: cannot find SCU device, rc=%d\n", __func__, rc);
return;
}
scu = devfdt_get_addr_ptr(scu_dev);
if (IS_ERR_OR_NULL(scu)) {
debug("%s: cannot get SCU address pointer\n", __func__);
return;
}
conf = readl(MCR_CONF);
ecc = conf & MCR_CONF_ECC_EN;
act_size = 0x100 << ((conf & MCR_CONF_MEMSZ_MASK) >> MCR_CONF_MEMSZ_SHIFT);
vga_rsvd = 0x8 << ((conf & MCR_CONF_VGA_MEMSZ_MASK) >> MCR_CONF_VGA_MEMSZ_SHIFT);
/* no VGA reservation if efuse VGA disable bit is set */
if (readl(scu->efuse) & SCU_EFUSE_DIS_VGA)
vga_rsvd = 0;
printf(" (capacity:%d MiB, VGA:%d MiB), ECC %s", act_size,
vga_rsvd, (ecc) ? "on" : "off");
}
void enable_caches(void)
{
/* get rid of the warning message */
}