u-boot/board/xilinx/zynq
Stefan Roese 06985289d4 watchdog: Implement generic watchdog_reset() version
This patch tries to implement a generic watchdog_reset() function that
can be used by all boards that want to service the watchdog device in
U-Boot. This watchdog servicing is enabled via CONFIG_WATCHDOG.

Without this approach, new boards or platforms needed to implement a
board specific version of this functionality, mostly copy'ing the same
code over and over again into their board or platforms code base.

With this new generic function, the scattered other functions are now
removed to be replaced by the generic one. The new version also enables
the configuration of the watchdog timeout via the DT "timeout-sec"
property (if enabled via CONFIG_OF_CONTROL).

This patch also adds a new flag to the GD flags, to flag that the
watchdog is ready to use and adds the pointer to the watchdog device
to the GD. This enables us to remove the global "watchdog_dev"
variable, which was prone to cause problems because of its potentially
very early use in watchdog_reset(), even before the BSS is cleared.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Heiko Schocher <hs@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: "Marek Behún" <marek.behun@nic.cz>
Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Cc: Maxim Sloyko <maxims@google.com>
Cc: Erik van Luijk <evanluijk@interact.nl>
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Weijie Gao <weijie.gao@mediatek.com>
Cc: Simon Glass <sjg@chromium.org>
Cc: "Álvaro Fernández Rojas" <noltari@gmail.com>
Cc: Philippe Reynes <philippe.reynes@softathome.com>
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Michal Simek <michal.simek@xilinx.com>
Tested-by: Michal Simek <michal.simek@xilinx.com> (on zcu100)
2019-04-26 09:16:32 +02:00
..
zynq-cc108 SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-dlc20-rev1.0 arm: zynq: Add support for DLC20 board 2018-10-16 14:58:45 +02:00
zynq-microzed SPDX: Convert a few files that were missed before 2018-05-10 20:38:35 -04:00
zynq-zc702 SPDX: Convert a few files that were missed before 2018-05-10 20:38:35 -04:00
zynq-zc706 SPDX: Convert a few files that were missed before 2018-05-10 20:38:35 -04:00
zynq-zc770-xm010 SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-zc770-xm011 SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-zc770-xm011-x16 SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-zc770-xm012 SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-zc770-xm013 SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-zed SPDX: Convert a few files that were missed before 2018-05-10 20:38:35 -04:00
zynq-zybo SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-zybo-z7 arm: zynq: add support for the zybo z7 board 2018-08-06 08:44:35 +02:00
.gitignore ARM: zynq: add default ps7_init_gpl.c/h for Zed, MicroZed, ZC70x 2015-05-25 10:52:36 +02:00
board.c watchdog: Implement generic watchdog_reset() version 2019-04-26 09:16:32 +02:00
bootimg.c xilinx: zynq: Add support to secure images 2018-07-19 10:49:54 +02:00
cmds.c ARM: zynq: Check zynq aes & rsa command parameters count 2019-04-16 11:51:34 +02:00
Kconfig xilinx: zynq: Add support to secure images 2018-07-19 10:49:54 +02:00
MAINTAINERS MAINTAINERS: Fix Zynq/ZynqMP and Microblaze fragments 2018-03-23 09:36:15 +01:00
Makefile xilinx: Move zynq_board_read_rom_ethaddr to shared location 2019-02-14 14:31:09 +01:00
xil_io.h SPDX: Convert all of our single license tags to Linux Kernel style 2018-05-07 09:34:12 -04:00
zynq-cse-nand ARM: zynq: Wire SPL configuration for cse nor/nand targets 2018-11-29 10:31:02 +01:00
zynq-cse-nor ARM: zynq: Wire SPL configuration for cse nor/nand targets 2018-11-29 10:31:02 +01:00
zynq-cse-qspi-single arm: zynq: Add mini u-boot configuration for zynq 2017-11-28 16:08:47 +01:00