mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 00:47:26 +00:00
b160fac9f7
ODROID-N2 is a single board computer manufactured by Hardkernel Co. Ltd with the following specifications: - Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC - 4GB DDR4 SDRAM - Gigabit Ethernet - HDMI 2.1 4K/60Hz display - 40-pin GPIO header - 4 x USB 3.0 Host, 1 x USB OTG - eMMC, microSD - Infrared receiver The board directory is W400, the name of the Amlogic Reference Design of Amlogic G12B with Gigabit boards, which will be used for similar boards. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Tested-by: Mark Kettenis <kettenis@openbsd.org>
130 lines
4.3 KiB
Text
130 lines
4.3 KiB
Text
U-Boot for Amlogic W400
|
|
=======================
|
|
|
|
U200 is a reference board manufactured by Amlogic with the following
|
|
specifications:
|
|
|
|
- Amlogic S922X ARM Cortex-A53 dual-core + Cortex-A73 quad-core SoC
|
|
- 2GB DDR4 SDRAM
|
|
- 10/100 Ethernet (Internal PHY)
|
|
- 1 x USB 3.0 Host
|
|
- eMMC
|
|
- SDcard
|
|
- Infrared receiver
|
|
- SDIO WiFi Module
|
|
- MIPI DSI Connector
|
|
- Audio HAT Connector
|
|
- PCI-E M.2 Connector
|
|
|
|
Schematics are available from Amlogic on demand.
|
|
|
|
Currently the u-boot port supports the following devices:
|
|
- serial
|
|
- Ethernet
|
|
- Regulators
|
|
- Clock controller
|
|
|
|
u-boot compilation
|
|
==================
|
|
|
|
> export ARCH=arm
|
|
> export CROSS_COMPILE=aarch64-none-elf-
|
|
> make w400_defconfig
|
|
> make
|
|
|
|
Image creation
|
|
==============
|
|
|
|
Amlogic doesn't provide sources for the firmware and for tools needed
|
|
to create the bootloader image, so it is necessary to obtain them from
|
|
the git tree published by the board vendor:
|
|
|
|
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
|
> wget https://releases.linaro.org/archive/13.11/components/toolchain/binaries/gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
|
> tar xvfJ gcc-linaro-aarch64-none-elf-4.8-2013.11_linux.tar.xz
|
|
> tar xvfJ gcc-linaro-arm-none-eabi-4.8-2013.11_linux.tar.xz
|
|
> export PATH=$PWD/gcc-linaro-aarch64-none-elf-4.8-2013.11_linux/bin:$PWD/gcc-linaro-arm-none-eabi-4.8-2013.11_linux/bin:$PATH
|
|
> git clone https://github.com/BayLibre/u-boot.git -b buildroot-openlinux-20180418 amlogic-u-boot
|
|
> cd amlogic-u-boot
|
|
> make g12b_w400_v1_defconfig
|
|
> make
|
|
> export UBOOTDIR=$PWD
|
|
|
|
Download the latest Amlogic Buildroot package, and extract it :
|
|
> wget http://openlinux2.amlogic.com:8000/ARM/filesystem/Linux_BSP/buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz
|
|
> tar xfz buildroot_openlinux_kernel_4.9_fbdev_20180706.tar.gz buildroot_openlinux_kernel_4.9_fbdev_20180706/bootloader
|
|
> export BRDIR=$PWD/buildroot_openlinux_kernel_4.9_fbdev_20180706
|
|
> export FIPDIR=$BRDIR/bootloader/uboot-repo/fip
|
|
|
|
Go back to mainline U-Boot source tree then :
|
|
> mkdir fip
|
|
|
|
> wget https://github.com/BayLibre/u-boot/releases/download/v2017.11-libretech-cc/blx_fix_g12a.sh -O fip/blx_fix.sh
|
|
> cp $UBOOTDIR/build/scp_task/bl301.bin fip/
|
|
> cp $UBOOTDIR/build/board/amlogic/g12b_w400_v1/firmware/acs.bin fip/
|
|
> cp $BRDIR/bootloader/uboot-repo/bl2/bin/g12b/bl2.bin fip/
|
|
> cp $BRDIR/bootloader/uboot-repo/bl30/bin/g12b/bl30.bin fip/
|
|
> cp $BRDIR/bootloader/uboot-repo/bl31_1.3/bin/g12b/bl31.img fip/
|
|
> cp $FIPDIR/g12b/ddr3_1d.fw fip/
|
|
> cp $FIPDIR/g12b/ddr4_1d.fw fip/
|
|
> cp $FIPDIR/g12b/ddr4_2d.fw fip/
|
|
> cp $FIPDIR/g12b/diag_lpddr4.fw fip/
|
|
> cp $FIPDIR/g12b/lpddr4_1d.fw fip/
|
|
> cp $FIPDIR/g12b/lpddr4_2d.fw fip/
|
|
> cp $FIPDIR/g12b/piei.fw fip/
|
|
> cp $FIPDIR/g12b/aml_ddr.fw fip/
|
|
> cp u-boot.bin fip/bl33.bin
|
|
|
|
> sh fip/blx_fix.sh \
|
|
fip/bl30.bin \
|
|
fip/zero_tmp \
|
|
fip/bl30_zero.bin \
|
|
fip/bl301.bin \
|
|
fip/bl301_zero.bin \
|
|
fip/bl30_new.bin \
|
|
bl30
|
|
|
|
> sh fip/blx_fix.sh \
|
|
fip/bl2.bin \
|
|
fip/zero_tmp \
|
|
fip/bl2_zero.bin \
|
|
fip/acs.bin \
|
|
fip/bl21_zero.bin \
|
|
fip/bl2_new.bin \
|
|
bl2
|
|
|
|
> $FIPDIR/g12b/aml_encrypt_g12b --bl30sig --input fip/bl30_new.bin \
|
|
--output fip/bl30_new.bin.g12a.enc \
|
|
--level v3
|
|
> $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl30_new.bin.g12a.enc \
|
|
--output fip/bl30_new.bin.enc \
|
|
--level v3 --type bl30
|
|
> $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl31.img \
|
|
--output fip/bl31.img.enc \
|
|
--level v3 --type bl31
|
|
> $FIPDIR/g12b/aml_encrypt_g12b --bl3sig --input fip/bl33.bin --compress lz4 \
|
|
--output fip/bl33.bin.enc \
|
|
--level v3 --type bl33
|
|
> $FIPDIR/g12b/aml_encrypt_g12b --bl2sig --input fip/bl2_new.bin \
|
|
--output fip/bl2.n.bin.sig
|
|
> $FIPDIR/g12b/aml_encrypt_g12b --bootmk \
|
|
--output fip/u-boot.bin \
|
|
--bl2 fip/bl2.n.bin.sig \
|
|
--bl30 fip/bl30_new.bin.enc \
|
|
--bl31 fip/bl31.img.enc \
|
|
--bl33 fip/bl33.bin.enc \
|
|
--ddrfw1 fip/ddr4_1d.fw \
|
|
--ddrfw2 fip/ddr4_2d.fw \
|
|
--ddrfw3 fip/ddr3_1d.fw \
|
|
--ddrfw4 fip/piei.fw \
|
|
--ddrfw5 fip/lpddr4_1d.fw \
|
|
--ddrfw6 fip/lpddr4_2d.fw \
|
|
--ddrfw7 fip/diag_lpddr4.fw \
|
|
--ddrfw8 fip/aml_ddr.fw \
|
|
--level v3
|
|
|
|
and then write the image to SD with:
|
|
|
|
> DEV=/dev/your_sd_device
|
|
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=512 skip=1 seek=1
|
|
> dd if=fip/u-boot.bin.sd.bin of=$DEV conv=fsync,notrunc bs=1 count=444
|