u-boot/arch/arm/cpu/armv7
Stefan Agner 3fd9579085 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL
i.MX 6UL and 6ULL have different boot device capabilities and
use therefor use a different boot device selection table than
other i.MX 6 devices. Particularly, the value which has been
used so far (b0001) is assigned to QSPI boot for these two
devices.

There is no common reserved value for all i.MX 6devices. Use
b0010 for i.MX 6UL and 6ULL via compile time ifdef.

Reported-by: Joël Esponde <joel.esponde@honeywell.com>
Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
Tested-by: Joël Esponde <joel.esponde@honeywell.com>
2017-07-12 09:42:33 +02:00
..
bcm235xx treewide: replace #include <asm/errno.h> with <linux/errno.h> 2016-09-23 17:55:42 -04:00
bcm281xx treewide: replace #include <asm/errno.h> with <linux/errno.h> 2016-09-23 17:55:42 -04:00
bcmcygnus arm: bcmcygnus: Add bcmcygnus u-architecture 2014-08-30 07:46:40 -04:00
bcmnsp arm: bcmnsp: Add bcmnsp u-architecture 2014-08-30 07:46:40 -04:00
iproc-common arm: iproc: Initial commit of iproc architecture code 2014-08-30 07:46:40 -04:00
kona-common board: arm:: Add support for Broadcom BCM23550 2016-06-13 08:56:02 -04:00
ls102xa dm: scsi: Document and rename the scsi_scan() parameter 2017-07-11 10:08:19 -06:00
mx5 arm: Re-sync ARCH_MX5 / MX51 / MX53 CONFIG options 2017-04-30 10:29:38 -04:00
mx6 imx: mx6ull: fix USB bmode for i.MX 6UL and 6ULL 2017-07-12 09:42:33 +02:00
mx7 pico-imx7d: Add initial support 2017-05-31 09:58:40 +02:00
mx7ulp imx: mx7ulp: Fix SPLL/APLL clock rate calculation issue 2017-04-12 18:45:10 +02:00
s5p-common exynos: pwm: Add a driver for the exynos5 PWM 2016-05-25 13:25:18 +09:00
stv0991 stv0991: configure clock & pad muxing for qspi 2015-07-03 13:50:53 +05:30
sunxi sunxi: psci: Move entry address setting to separate function 2017-06-12 15:41:02 +05:30
vf610 ARM: vf610: move to standard arch/board approach 2017-03-19 17:30:11 +01:00
arch_timer.c arm: armv7: add us timer for bootstage 2016-12-09 08:39:10 -05:00
cache_v7.c ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
cache_v7_asm.S arm: Migrate SYS_THUMB_BUILD to Kconfig, introduce SPL_SYS_THUMB_BUILD 2017-03-18 20:28:01 -04:00
config.mk ARM: move -march=* and -mtune= options to arch/arm/Makefile 2015-03-27 16:55:22 +01:00
cp15.c ARM: Introduce erratum workaround for 454179 2015-03-13 09:28:48 -04:00
cpu.c arm: Turn of d-cache before i-cache 2015-09-02 21:28:25 -06:00
Kconfig ARM: armv7: move ARMV7_PSCI_NR_CPUS to Kconfig 2016-09-07 08:48:54 -04:00
lowlevel_init.S armv7: Mark the default lowlevel_init function as weak 2017-06-05 11:02:23 -04:00
Makefile armv7: Mark the default lowlevel_init function as weak 2017-06-05 11:02:23 -04:00
nonsec_virt.S ARM: rename CONFIG_TIMER_CLK_FREQ to COUNTER_FREQUENCY 2017-04-05 15:03:17 +05:30
psci-common.c ARM: Rework and correct barrier definitions 2016-08-05 07:23:57 -04:00
psci.S armv7: psci: cpu_off: flush D-Cache before disable D-Cache 2016-11-29 08:15:31 -05:00
smccc-call.S ARM: adjust arm-smccc code for use in U-Boot 2017-04-18 10:29:17 -04:00
start.S Add ARM errata workaround 852421 and 852423 for Cortex-A17 2017-05-08 11:57:36 -04:00
syslib.c ARM: OMAP: hide custom bit manipulation function sr32() 2014-04-17 14:39:54 -04:00
virt-dt.c ARMv8/PSCI: Fixup the device tree for PSCI 2016-07-19 11:34:07 -07:00
virt-v7.c ARM: non-sec: flush code cacheline aligned 2016-08-12 09:22:15 -04:00