mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-27 15:12:21 +00:00
a3c1e0e067
This complements commit 068789773d which did the conversion for
mpc85xx.
Signed-off-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Mario Six <mario.six@gdsys.cc>
299 lines
7.9 KiB
C
299 lines
7.9 KiB
C
/* SPDX-License-Identifier: GPL-2.0+ */
|
|
/*
|
|
* (C) Copyright 2013
|
|
* Heiko Schocher, DENX Software Engineering, hs@denx.de.
|
|
*
|
|
* Based on:
|
|
* Copyright (c) 2011 IDS GmbH, Germany
|
|
* Sergej Stepanov <ste@ids.de>
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/*
|
|
* High Level Configuration Options
|
|
*/
|
|
#define CONFIG_BOOT_RETRY_TIME 900
|
|
#define CONFIG_BOOT_RETRY_MIN 30
|
|
#define CONFIG_RESET_TO_RETRY
|
|
|
|
#define CONFIG_SYS_SICRH 0x00000000
|
|
#define CONFIG_SYS_SICRL (SICRL_LBC | SICRL_SPI_D)
|
|
|
|
#define CONFIG_HWCONFIG
|
|
|
|
/*
|
|
* Definitions for initial stack pointer and data area (in DCACHE )
|
|
*/
|
|
#define CONFIG_SYS_INIT_RAM_LOCK
|
|
#define CONFIG_SYS_INIT_RAM_ADDR 0xFD000000
|
|
#define CONFIG_SYS_INIT_RAM_SIZE 0x1000 /* End of used area in DPRAM */
|
|
#define CONFIG_SYS_GBL_DATA_SIZE 0x100
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE \
|
|
- CONFIG_SYS_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
|
|
|
|
/*
|
|
* Internal Definitions
|
|
*/
|
|
/*
|
|
* DDR Setup
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
|
|
/*
|
|
* Manually set up DDR parameters,
|
|
* as this board has not the SPD connected to I2C.
|
|
*/
|
|
#define CONFIG_SYS_DDR_SIZE 256 /* MB */
|
|
#define CONFIG_SYS_DDR_CONFIG (CSCONFIG_EN |\
|
|
0x00010000 |\
|
|
CSCONFIG_ROW_BIT_13 |\
|
|
CSCONFIG_COL_BIT_10)
|
|
|
|
#define CONFIG_SYS_DDR_CONFIG_256 (CONFIG_SYS_DDR_CONFIG | \
|
|
CSCONFIG_BANK_BIT_3)
|
|
|
|
#define CONFIG_SYS_DDR_TIMING_3 (1 << 16) /* ext refrec */
|
|
#define CONFIG_SYS_DDR_TIMING_0 ((3 << TIMING_CFG0_RWT_SHIFT) |\
|
|
(3 << TIMING_CFG0_WRT_SHIFT) |\
|
|
(3 << TIMING_CFG0_RRT_SHIFT) |\
|
|
(3 << TIMING_CFG0_WWT_SHIFT) |\
|
|
(6 << TIMING_CFG0_ACT_PD_EXIT_SHIFT) |\
|
|
(2 << TIMING_CFG0_PRE_PD_EXIT_SHIFT) |\
|
|
(8 << TIMING_CFG0_ODT_PD_EXIT_SHIFT) | \
|
|
(2 << TIMING_CFG0_MRS_CYC_SHIFT))
|
|
#define CONFIG_SYS_DDR_TIMING_1 ((4 << TIMING_CFG1_PRETOACT_SHIFT) |\
|
|
(12 << TIMING_CFG1_ACTTOPRE_SHIFT) |\
|
|
(4 << TIMING_CFG1_ACTTORW_SHIFT) |\
|
|
(7 << TIMING_CFG1_CASLAT_SHIFT) |\
|
|
(4 << TIMING_CFG1_REFREC_SHIFT) |\
|
|
(4 << TIMING_CFG1_WRREC_SHIFT) |\
|
|
(2 << TIMING_CFG1_ACTTOACT_SHIFT) |\
|
|
(2 << TIMING_CFG1_WRTORD_SHIFT))
|
|
#define CONFIG_SYS_DDR_TIMING_2 ((1 << TIMING_CFG2_ADD_LAT_SHIFT) |\
|
|
(5 << TIMING_CFG2_CPO_SHIFT) |\
|
|
(4 << TIMING_CFG2_WR_LAT_DELAY_SHIFT) |\
|
|
(2 << TIMING_CFG2_RD_TO_PRE_SHIFT) |\
|
|
(0 << TIMING_CFG2_WR_DATA_DELAY_SHIFT) |\
|
|
(1 << TIMING_CFG2_CKE_PLS_SHIFT) |\
|
|
(6 << TIMING_CFG2_FOUR_ACT_SHIFT))
|
|
|
|
#define CONFIG_SYS_DDR_INTERVAL ((0x800 << SDRAM_INTERVAL_REFINT_SHIFT) |\
|
|
(0x800 << SDRAM_INTERVAL_BSTOPRE_SHIFT))
|
|
|
|
#define CONFIG_SYS_SDRAM_CFG (SDRAM_CFG_SREN |\
|
|
SDRAM_CFG_2T_EN | SDRAM_CFG_HSE |\
|
|
SDRAM_CFG_DBW_32 |\
|
|
SDRAM_CFG_SDRAM_TYPE_DDR2)
|
|
|
|
#define CONFIG_SYS_SDRAM_CFG2 0x00401000
|
|
#define CONFIG_SYS_DDR_MODE ((0x0448 << SDRAM_MODE_ESD_SHIFT) |\
|
|
(0x0242 << SDRAM_MODE_SD_SHIFT))
|
|
#define CONFIG_SYS_DDR_MODE_2 0x00000000
|
|
#define CONFIG_SYS_DDR_CLK_CNTL DDR_SDRAM_CLK_CNTL_CLK_ADJUST_075
|
|
#define CONFIG_SYS_DDRCDR_VALUE (DDRCDR_EN |\
|
|
DDRCDR_PZ_NOMZ |\
|
|
DDRCDR_NZ_NOMZ |\
|
|
DDRCDR_ODT |\
|
|
DDRCDR_M_ODR |\
|
|
DDRCDR_Q_DRN)
|
|
|
|
/*
|
|
* on-board devices
|
|
*/
|
|
#define CONFIG_TSEC1
|
|
#define CONFIG_TSEC2
|
|
|
|
/*
|
|
* NOR FLASH setup
|
|
*/
|
|
#define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_8BIT
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 50
|
|
|
|
#define CONFIG_SYS_FLASH_BASE 0xFF800000
|
|
#define CONFIG_SYS_FLASH_SIZE 8
|
|
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 128
|
|
|
|
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000
|
|
#define CONFIG_SYS_FLASH_WRITE_TOUT 500
|
|
|
|
/*
|
|
* NAND FLASH setup
|
|
*/
|
|
#define CONFIG_SYS_NAND_BASE 0xE1000000
|
|
#define CONFIG_SYS_MAX_NAND_DEVICE 1
|
|
#define CONFIG_SYS_NAND_MAX_CHIPS 1
|
|
#define CONFIG_NAND_FSL_ELBC
|
|
#define CONFIG_SYS_NAND_PAGE_SIZE (2048)
|
|
#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10)
|
|
#define NAND_CACHE_PAGES 64
|
|
|
|
|
|
/*
|
|
* MRAM setup
|
|
*/
|
|
#define CONFIG_SYS_MRAM_BASE 0xE2000000
|
|
#define CONFIG_SYS_MRAM_SIZE 0x20000 /* 128 Kb */
|
|
|
|
#define CONFIG_SYS_OR_TIMING_MRAM
|
|
|
|
|
|
/*
|
|
* CPLD setup
|
|
*/
|
|
#define CONFIG_SYS_CPLD_BASE 0xE3000000
|
|
#define CONFIG_SYS_CPLD_SIZE 0x8000
|
|
|
|
#define CONFIG_SYS_OR_TIMING_MRAM
|
|
|
|
|
|
/*
|
|
* HW-Watchdog
|
|
*/
|
|
#define CONFIG_WATCHDOG 1
|
|
#define CONFIG_SYS_WATCHDOG_VALUE 0xFFFF
|
|
|
|
/*
|
|
* I2C setup
|
|
*/
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_FSL
|
|
#define CONFIG_SYS_FSL_I2C_SPEED 400000
|
|
#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F
|
|
#define CONFIG_SYS_FSL_I2C_OFFSET 0x3100
|
|
#define CONFIG_RTC_PCF8563
|
|
#define CONFIG_SYS_I2C_RTC_ADDR 0x51
|
|
|
|
/*
|
|
* Ethernet setup
|
|
*/
|
|
#ifdef CONFIG_TSEC1
|
|
#define CONFIG_HAS_ETH0
|
|
#define CONFIG_TSEC1_NAME "TSEC0"
|
|
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
|
|
#define TSEC1_PHY_ADDR 0x1
|
|
#define TSEC1_FLAGS TSEC_GIGABIT
|
|
#define TSEC1_PHYIDX 0
|
|
#endif
|
|
|
|
#ifdef CONFIG_TSEC2
|
|
#define CONFIG_HAS_ETH1
|
|
#define CONFIG_TSEC2_NAME "TSEC1"
|
|
#define CONFIG_SYS_TSEC2_OFFSET 0x25000
|
|
#define TSEC2_PHY_ADDR 0x3
|
|
#define TSEC2_FLAGS TSEC_GIGABIT
|
|
#define TSEC2_PHYIDX 0
|
|
#endif
|
|
#define CONFIG_ETHPRIME "TSEC1"
|
|
|
|
/*
|
|
* Serial Port
|
|
*/
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
|
|
#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x4500)
|
|
#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x4600)
|
|
#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0))
|
|
|
|
#define CONFIG_HAS_FSL_DR_USB
|
|
#define CONFIG_SYS_SCCR_USBDRCM 3
|
|
|
|
/*
|
|
* U-Boot environment setup
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
|
|
/*
|
|
* The reserved memory
|
|
*/
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (768 * 1024)
|
|
#define CONFIG_SYS_MALLOC_LEN (8 * 1024 * 1024)
|
|
|
|
/*
|
|
* Environment Configuration
|
|
*/
|
|
|
|
#define CONFIG_NETDEV eth1
|
|
#define CONFIG_HOSTNAME "ids8313"
|
|
#define CONFIG_ROOTPATH "/opt/eldk-4.2/ppc_6xx"
|
|
#define CONFIG_BOOTFILE "ids8313/uImage"
|
|
#define CONFIG_UBOOTPATH "ids8313/u-boot.bin"
|
|
#define CONFIG_FDTFILE "ids8313/ids8313.dtb"
|
|
#define CONFIG_LOADADDR 0x400000
|
|
#define CONFIG_ENV_FLAGS_LIST_STATIC "ethaddr:mo,eth1addr:mo"
|
|
|
|
/* Initial Memory map for Linux*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (256 << 20)
|
|
|
|
/*
|
|
* Miscellaneous configurable options
|
|
*/
|
|
#define CONFIG_SYS_CBSIZE 1024
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x00001000
|
|
#define CONFIG_SYS_MEMTEST_END 0x00C00000
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x100000
|
|
#define CONFIG_LOADS_ECHO
|
|
#define CONFIG_TIMESTAMP
|
|
#define CONFIG_BOOTCOMMAND "run boot_cramfs"
|
|
#undef CONFIG_SYS_LOADS_BAUD_CHANGE
|
|
|
|
#define CONFIG_JFFS2_NAND
|
|
#define CONFIG_JFFS2_DEV "0"
|
|
|
|
/* mtdparts command line support */
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"netdev=" __stringify(CONFIG_NETDEV) "\0" \
|
|
"ethprime=TSEC1\0" \
|
|
"uboot=" __stringify(CONFIG_UBOOTPATH) "\0" \
|
|
"tftpflash=tftpboot ${loadaddr} ${uboot}; " \
|
|
"protect off " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +${filesize}; " \
|
|
"erase " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +${filesize}; " \
|
|
"cp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" ${filesize}; " \
|
|
"protect on " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" +${filesize}; " \
|
|
"cmp.b ${loadaddr} " __stringify(CONFIG_SYS_TEXT_BASE) \
|
|
" ${filesize}\0" \
|
|
"console=ttyS0\0" \
|
|
"fdtaddr=0x780000\0" \
|
|
"kernel_addr=ff800000\0" \
|
|
"fdtfile=" __stringify(CONFIG_FDTFILE) "\0" \
|
|
"setbootargs=setenv bootargs " \
|
|
"root=${rootdev} rw console=${console}," \
|
|
"${baudrate} ${othbootargs}\0" \
|
|
"setipargs=setenv bootargs root=${rootdev} rw " \
|
|
"nfsroot=${serverip}:${rootpath} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:" \
|
|
"${netmask}:${hostname}:${netdev}:off " \
|
|
"console=${console},${baudrate} ${othbootargs}\0" \
|
|
"addmtd=setenv bootargs ${bootargs} ${mtdparts}\0" \
|
|
"mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
|
|
"mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
|
|
"\0"
|
|
|
|
#define CONFIG_NFSBOOTCOMMAND \
|
|
"setenv rootdev /dev/nfs;" \
|
|
"run setipargs;run addmtd;" \
|
|
"tftp ${loadaddr} ${bootfile};" \
|
|
"tftp ${fdtaddr} ${fdtfile};" \
|
|
"fdt addr ${fdtaddr};" \
|
|
"bootm ${loadaddr} - ${fdtaddr}"
|
|
|
|
/* UBI Support */
|
|
|
|
#endif /* __CONFIG_H */
|