mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-18 02:38:56 +00:00
2f8a6db5d8
In order to finish moving this symbol to Kconfig for all platforms, we need to do a few more things. First, for all platforms that define this to a function, introduce CONFIG_DYNAMIC_SYS_CLK_FREQ, similar to CONFIG_DYNAMIC_DDR_CLK_FREQ and populate clock_legacy.h. This entails also switching all users from CONFIG_SYS_CLK_FREQ to get_board_sys_clk() and updating a few preprocessor tests. With that done, all platforms that define a value here can be converted to Kconfig, and a fall-back of zero is sufficiently safe to use (and what is used today in cases where code may or may not have this available). Make sure that code which calls this function includes <clock_legacy.h> to get the prototype. Signed-off-by: Tom Rini <trini@konsulko.com> |
||
|---|---|---|
| .. | ||
| ddr.c | ||
| ddr.h | ||
| eth.c | ||
| Kconfig | ||
| ls1043aqds.c | ||
| ls1043aqds_pbi.cfg | ||
| ls1043aqds_qixis.h | ||
| ls1043aqds_rcw_nand.cfg | ||
| ls1043aqds_rcw_sd_ifc.cfg | ||
| ls1043aqds_rcw_sd_qspi.cfg | ||
| MAINTAINERS | ||
| Makefile | ||
| README | ||
Overview
--------
The LS1043A Development System (QDS) is a high-performance computing,
evaluation, and development platform that supports the QorIQ LS1043A
LayerScape Architecture processor. The LS1043AQDS provides SW development
platform for the Freescale LS1043A processor series, with a complete
debugging environment.
LS1043A SoC Overview
--------------------
Please refer arch/arm/cpu/armv8/fsl-layerscape/doc/README.soc for LS1043A
SoC overview.
LS1043AQDS board Overview
-----------------------
- SERDES Connections, 4 lanes supporting:
- PCI Express - 3.0
- SGMII, SGMII 2.5
- QSGMII
- SATA 3.0
- 10GBase-R
- DDR Controller
- 2GB 40bits (8-bits ECC) DDR4 SDRAM. Support rates of up to 1600MT/s
-IFC/Local Bus
- One in-socket 128 MB NOR flash 16-bit data bus
- One 512 MB NAND flash with ECC support
- PromJet Port
- FPGA connection
- USB 3.0
- Three high speed USB 3.0 ports
- First USB 3.0 port configured as Host with Type-A connector
- The other two USB 3.0 ports configured as OTG with micro-AB connector
- SDHC port connects directly to an adapter card slot, featuring:
- Optional clock feedback paths, and optional high-speed voltage translation assistance
- SD slots for SD, SDHC (1x, 4x, 8x), and/or MMC
- eMMC memory devices
- DSPI: Onboard support for three SPI flash memory devices
- 4 I2C controllers
- One SATA onboard connectors
- UART
- Two 4-pin serial ports at up to 115.2 Kbit/s
- Two DB9 D-Type connectors supporting one Serial port each
- ARM JTAG support
Memory map from core's view
----------------------------
Start Address End Address Description Size
0x00_0000_0000 0x00_000F_FFFF Secure Boot ROM 1MB
0x00_0100_0000 0x00_0FFF_FFFF CCSRBAR 240MB
0x00_1000_0000 0x00_1000_FFFF OCRAM0 64KB
0x00_1001_0000 0x00_1001_FFFF OCRAM1 64KB
0x00_2000_0000 0x00_20FF_FFFF DCSR 16MB
0x00_6000_0000 0x00_67FF_FFFF IFC - NOR Flash 128MB
0x00_7E80_0000 0x00_7E80_FFFF IFC - NAND Flash 64KB
0x00_7FB0_0000 0x00_7FB0_0FFF IFC - FPGA 4KB
0x00_8000_0000 0x00_FFFF_FFFF DRAM1 2GB
Booting Options
---------------
a) Promjet Boot
b) NOR boot
c) NAND boot
d) SD boot
e) QSPI boot