u-boot/board/timll/devkit8000/devkit8000.c
Simon Schwarz 3f6a4922d4 devkit8000: Add nand-spl support for new SPL
Add NAND SPL support to the devkit8000 config

Signed-off-by: Simon Schwarz <simonschwarzcor@gmail.com>
Signed-off-by: Sandeep Paulraj <s-paulraj@ti.com>
2011-09-30 22:00:54 +02:00

140 lines
3.6 KiB
C

/*
* (C) Copyright 2004-2008
* Texas Instruments, <www.ti.com>
*
* Author :
* Sunil Kumar <sunilsaini05@gmail.com>
* Shashi Ranjan <shashiranjanmca05@gmail.com>
*
* (C) Copyright 2009
* Frederik Kriewitz <frederik@kriewitz.eu>
*
* Derived from Beagle Board and 3430 SDP code by
* Richard Woodruff <r-woodruff2@ti.com>
* Syed Mohammed Khasim <khasim@ti.com>
*
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <twl4030.h>
#include <asm/io.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/arch/mux.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/mem.h>
#include <asm/mach-types.h>
#include "devkit8000.h"
#ifdef CONFIG_DRIVER_DM9000
#include <net.h>
#include <netdev.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
/*
* Routine: board_init
* Description: Early hardware init.
*/
int board_init(void)
{
gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
/* board id for Linux */
gd->bd->bi_arch_number = MACH_TYPE_DEVKIT8000;
/* boot param addr */
gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
return 0;
}
/*
* Routine: misc_init_r
* Description: Configure board specific parts
*/
int misc_init_r(void)
{
struct ctrl_id *id_base = (struct ctrl_id *)OMAP34XX_ID_L4_IO_BASE;
#ifdef CONFIG_DRIVER_DM9000
uchar enetaddr[6];
u32 die_id_0;
#endif
twl4030_power_init();
#ifdef CONFIG_TWL4030_LED
twl4030_led_init(TWL4030_LED_LEDEN_LEDAON | TWL4030_LED_LEDEN_LEDBON);
#endif
#ifdef CONFIG_DRIVER_DM9000
/* Configure GPMC registers for DM9000 */
writel(NET_GPMC_CONFIG1, &gpmc_cfg->cs[6].config1);
writel(NET_GPMC_CONFIG2, &gpmc_cfg->cs[6].config2);
writel(NET_GPMC_CONFIG3, &gpmc_cfg->cs[6].config3);
writel(NET_GPMC_CONFIG4, &gpmc_cfg->cs[6].config4);
writel(NET_GPMC_CONFIG5, &gpmc_cfg->cs[6].config5);
writel(NET_GPMC_CONFIG6, &gpmc_cfg->cs[6].config6);
writel(NET_GPMC_CONFIG7, &gpmc_cfg->cs[6].config7);
/* Use OMAP DIE_ID as MAC address */
if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
printf("ethaddr not set, using Die ID\n");
die_id_0 = readl(&id_base->die_id_0);
enetaddr[0] = 0x02; /* locally administered */
enetaddr[1] = readl(&id_base->die_id_1) & 0xff;
enetaddr[2] = (die_id_0 & 0xff000000) >> 24;
enetaddr[3] = (die_id_0 & 0x00ff0000) >> 16;
enetaddr[4] = (die_id_0 & 0x0000ff00) >> 8;
enetaddr[5] = (die_id_0 & 0x000000ff);
eth_setenv_enetaddr("ethaddr", enetaddr);
}
#endif
dieid_num_r();
return 0;
}
/*
* Routine: set_muxconf_regs
* Description: Setting up the configuration Mux registers specific to the
* hardware. Many pins need to be moved from protect to primary
* mode.
*/
void set_muxconf_regs(void)
{
MUX_DEVKIT8000();
}
#ifdef CONFIG_GENERIC_MMC
int board_mmc_init(bd_t *bis)
{
omap_mmc_init(0);
return 0;
}
#endif
#if defined(CONFIG_DRIVER_DM9000) & !defined(CONFIG_SPL_BUILD)
/*
* Routine: board_eth_init
* Description: Setting up the Ethernet hardware.
*/
int board_eth_init(bd_t *bis)
{
return dm9000_initialize(bis);
}
#endif