u-boot/arch/powerpc/dts/kmcent2-u-boot.dtsi
Niel Fourie 37bfd9cb50 PowerPC: keymile: Add support for kmcent2 board
Add basic support for the Hitachi Power Grids kmcent2 board, based
on the NXP QorIQ T1040 SoC.

Signed-off-by: Valentin Longchamp <valentin.longchamp@hitachi-powergrids.com>
Signed-off-by: Rainer Boschung <rainer.boschung@hitachi-powergrids.com>
Signed-off-by: Niel Fourie <lusus@denx.de>
Cc: Holger Brunck <holger.brunck@hitachi-powergrids.com>
Cc: Heiko Schocher <hs@denx.de>
Reviewed-by: Stefan Roese <sr@denx.de>
[Fixed blank line at EOF errors]
Signed-off-by: Priyanka Jain <priyanka.jain@nxp.com>
2021-02-08 14:01:18 +05:30

97 lines
1.7 KiB
Text

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* (C) Copyright 2021 Niel Fourie <lusus@denx.de>
*/
#include <config.h>
/ {
aliases {
spi0 = "/soc@ffe000000/spi@110000";
i2c0 = "/soc@ffe000000/i2c@118000";
i2c1 = "/soc@ffe000000/i2c@118000/mux@70/i2c@0";
i2c2 = "/soc@ffe000000/i2c@118000/mux@70/i2c@1";
i2c3 = "/soc@ffe000000/i2c@118000/mux@70/i2c@7";
i2c4 = "/soc@ffe000000/i2c@118100";
/delete-property/ pci1;
/delete-property/ pci2;
/delete-property/ pci3;
};
chosen {
stdout-path = "/soc@ffe000000/serial@11c500";
};
soc@ffe000000 {
u-boot,dm-pre-reloc;
spi@110000 {
/* This documents where km_fpgacfg should be appear */
fpga@0 {
compatible = "keymile,fpga-conf";
reg = <0>;
spi-max-frequency = <25000000>;
};
};
sdhc@114000 {
status = "okay";
};
i2c@118000 {
u-boot,dm-pre-reloc;
mux@70 {
i2c@1 { /* IVM bus */
reg = <1>;
#address-cells = <1>;
#size-cells = <0>;
};
};
};
serial@11c500 {
u-boot,dm-pre-reloc;
clock-frequency = <200000000>;
};
fman@400000 {
ethernet@e0000 {
phy-connection-type = "sgmii";
};
ethernet@e2000 {
phy-connection-type = "sgmii";
};
ethernet@e8000 {
phy-connection-type = "rgmii-id";
};
};
};
pcie@ffe240000 {
compatible = "fsl,pcie-t104x";
law_trgt_if = <0>;
};
binman {
filename = "u-boot-with-dtb.bin";
skip-at-start = <CONFIG_SYS_TEXT_BASE>;
sort-by-offset;
pad-byte = <0xff>;
size = <CONFIG_SYS_MONITOR_LEN>;
u-boot-with-ucode-ptr {
offset = <CONFIG_SYS_TEXT_BASE>;
optional-ucode;
};
u-boot-dtb-with-ucode {
align = <256>;
};
powerpc-mpc85xx-bootpg-resetvec {
offset = <(CONFIG_RESET_VECTOR_ADDRESS - 0xffc)>;
};
};
};