u-boot/drivers/power/Makefile
Jelle van der Waa 0d8382ae70 sunxi: power: add support for sy8106a driver
SY8106A is a PMIC which is used on the Allwinner
H3 Orange Pi Pc and Plus board. The VOUT1_SEL register is
implemented to set the default V-CPU voltage to 1200 mV.

This driver is required to ensure the SY8106A V-CPU
voltage is set to 1200 mV after a software reset. On cold
boot the default SY8106A output voltage is selected to be
1200 mV by a pair of resistors on the Orange Pi PC and Plus.

Signed-off-by: Jelle van der Waa <jelle@vdwaa.nl>
Tested-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Acked-by: Siarhei Siamashka <siarhei.siamashka@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
2016-02-23 20:50:07 +01:00

24 lines
808 B
Makefile

#
# Copyright (c) 2009 Wind River Systems, Inc.
# Tom Rix <Tom.Rix at windriver.com>
#
# SPDX-License-Identifier: GPL-2.0+
#
obj-$(CONFIG_AS3722_POWER) += as3722.o
obj-$(CONFIG_AXP152_POWER) += axp152.o
obj-$(CONFIG_AXP209_POWER) += axp209.o
obj-$(CONFIG_AXP221_POWER) += axp221.o
obj-$(CONFIG_AXP818_POWER) += axp818.o
obj-$(CONFIG_EXYNOS_TMU) += exynos-tmu.o
obj-$(CONFIG_FTPMU010_POWER) += ftpmu010.o
obj-$(CONFIG_SY8106A_POWER) += sy8106a.o
obj-$(CONFIG_TPS6586X_POWER) += tps6586x.o
obj-$(CONFIG_TWL4030_POWER) += twl4030.o
obj-$(CONFIG_TWL6030_POWER) += twl6030.o
obj-$(CONFIG_PALMAS_POWER) += palmas.o
obj-$(CONFIG_POWER) += power_core.o
obj-$(CONFIG_DIALOG_POWER) += power_dialog.o
obj-$(CONFIG_POWER_FSL) += power_fsl.o
obj-$(CONFIG_POWER_I2C) += power_i2c.o
obj-$(CONFIG_POWER_SPI) += power_spi.o