mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 00:21:06 +00:00
ae6b03fefc
The P3060QDS is a Freescale reference board for the six-core P3060 SOC. P3060QDS Board Overview: Memory subsystem: - 2G Bytes unbuffered DDR3 SDRAM SO-DIMM(64bit bus) - 128M Bytes NOR flash single-chip memory - 16M Bytes SPI flash - 8K Bytes AT24C64 I2C EEPROM for RCW Ethernet: - Eight Ethernet controllers (4x1G + 4x1G/2.5G) - Three VSC8641 PHYs on board (2xRGMII + 1xMII) - Suport multiple Vitesse VSC8234 SGMII Cards in Slot1/2/3 PCIe: Two PCI Express 2.0 controllers/ports USB: Two USB2.0, USB1(TYPE-A) and USB2(TYPE-AB) on board I2C: Four I2C controllers UART: Supports two dUARTs up to 115200 bps for console RapidIO: Two RapidIO, sRIO1 and sRIO2 Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: York Sun <yorksun@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
162 lines
4.3 KiB
C
162 lines
4.3 KiB
C
/*
|
|
* Copyright 2010-2011 Freescale Semiconductor, Inc.
|
|
*
|
|
* See file CREDITS for list of people who contributed to this
|
|
* project.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation; either version 2 of
|
|
* the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
|
|
* MA 02111-1307 USA
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <asm/io.h>
|
|
|
|
#include "ics307_clk.h"
|
|
|
|
#if defined(CONFIG_FSL_NGPIXIS)
|
|
#include "ngpixis.h"
|
|
#define fpga_reg pixis
|
|
#elif defined(CONFIG_FSL_QIXIS)
|
|
#include "qixis.h"
|
|
#define fpga_reg ((struct qixis *)QIXIS_BASE)
|
|
#else
|
|
#include "pixis.h"
|
|
#define fpga_reg pixis
|
|
#endif
|
|
|
|
/* define for SYS CLK or CLK1Frequency */
|
|
#define TTL 1
|
|
#define CLK2 0
|
|
#define CRYSTAL 0
|
|
#define MAX_VDW (511 + 8)
|
|
#define MAX_RDW (127 + 2)
|
|
#define MIN_VDW (4 + 8)
|
|
#define MIN_RDW (1 + 2)
|
|
#define NUM_OD_SETTING 8
|
|
/*
|
|
* These defines cover the industrial temperature range part,
|
|
* for commercial, change below to 400000 and 55000, respectively
|
|
*/
|
|
#define MAX_VCO 360000
|
|
#define MIN_VCO 60000
|
|
|
|
/* decode S[0-2] to Output Divider (OD) */
|
|
static u8 ics307_s_to_od[] = {
|
|
10, 2, 8, 4, 5, 7, 3, 6
|
|
};
|
|
|
|
/*
|
|
* Find one solution to generate required frequency for SYSCLK
|
|
* out_freq: KHz, required frequency to the SYSCLK
|
|
* the result will be retuned with component RDW, VDW, OD, TTL,
|
|
* CLK2 and crystal
|
|
*/
|
|
unsigned long ics307_sysclk_calculator(unsigned long out_freq)
|
|
{
|
|
const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ;
|
|
unsigned long vdw, rdw, odp, s_vdw = 0, s_rdw = 0, s_odp = 0, od;
|
|
unsigned long tmp_out, diff, result = 0;
|
|
int found = 0;
|
|
|
|
for (odp = 0; odp < NUM_OD_SETTING; odp++) {
|
|
od = ics307_s_to_od[odp];
|
|
if (od * out_freq < MIN_VCO || od * out_freq > MAX_VCO)
|
|
continue;
|
|
for (rdw = MIN_RDW; rdw <= MAX_RDW; rdw++) {
|
|
/* Calculate the VDW */
|
|
vdw = out_freq * 1000 * od * rdw / (input_freq * 2);
|
|
if (vdw > MAX_VDW)
|
|
vdw = MAX_VDW;
|
|
if (vdw < MIN_VDW)
|
|
continue;
|
|
/* Calculate the temp out frequency */
|
|
tmp_out = input_freq * 2 * vdw / (rdw * od * 1000);
|
|
diff = MAX(out_freq, tmp_out) - MIN(out_freq, tmp_out);
|
|
/*
|
|
* calculate the percent, the precision is 1/1000
|
|
* If greater than 1/1000, continue
|
|
* otherwise, we think the solution is we required
|
|
*/
|
|
if (diff * 1000 / out_freq > 1)
|
|
continue;
|
|
else {
|
|
s_vdw = vdw;
|
|
s_rdw = rdw;
|
|
s_odp = odp;
|
|
found = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (found)
|
|
result = (s_rdw - 2) | (s_vdw - 8) << 7 | s_odp << 16 |
|
|
CLK2 << 19 | TTL << 21 | CRYSTAL << 22;
|
|
|
|
debug("ICS307-02: RDW: %ld, VDW: %ld, OD: %d\n", s_rdw - 2, s_vdw - 8,
|
|
ics307_s_to_od[s_odp]);
|
|
return result;
|
|
}
|
|
|
|
/*
|
|
* Calculate frequency being generated by ICS307-02 clock chip based upon
|
|
* the control bytes being programmed into it.
|
|
*/
|
|
static unsigned long ics307_clk_freq(u8 cw0, u8 cw1, u8 cw2)
|
|
{
|
|
const unsigned long input_freq = CONFIG_ICS307_REFCLK_HZ;
|
|
unsigned long vdw = ((cw1 << 1) & 0x1FE) + ((cw2 >> 7) & 1);
|
|
unsigned long rdw = cw2 & 0x7F;
|
|
unsigned long od = ics307_s_to_od[cw0 & 0x7];
|
|
unsigned long freq;
|
|
|
|
/*
|
|
* CLK1 Freq = Input Frequency * 2 * (VDW + 8) / ((RDW + 2) * OD)
|
|
*
|
|
* cw0: C1 C0 TTL F1 F0 S2 S1 S0
|
|
* cw1: V8 V7 V6 V5 V4 V3 V2 V1
|
|
* cw2: V0 R6 R5 R4 R3 R2 R1 R0
|
|
*
|
|
* R6:R0 = Reference Divider Word (RDW)
|
|
* V8:V0 = VCO Divider Word (VDW)
|
|
* S2:S0 = Output Divider Select (OD)
|
|
* F1:F0 = Function of CLK2 Output
|
|
* TTL = duty cycle
|
|
* C1:C0 = internal load capacitance for cyrstal
|
|
*
|
|
*/
|
|
|
|
freq = input_freq * 2 * (vdw + 8) / ((rdw + 2) * od);
|
|
|
|
debug("ICS307: CW[0-2]: %02X %02X %02X => %lu Hz\n", cw0, cw1, cw2,
|
|
freq);
|
|
return freq;
|
|
}
|
|
|
|
unsigned long get_board_sys_clk(void)
|
|
{
|
|
return ics307_clk_freq(
|
|
in_8(&fpga_reg->sclk[0]),
|
|
in_8(&fpga_reg->sclk[1]),
|
|
in_8(&fpga_reg->sclk[2]));
|
|
}
|
|
|
|
unsigned long get_board_ddr_clk(void)
|
|
{
|
|
return ics307_clk_freq(
|
|
in_8(&fpga_reg->dclk[0]),
|
|
in_8(&fpga_reg->dclk[1]),
|
|
in_8(&fpga_reg->dclk[2]));
|
|
}
|