u-boot/doc/README.mpc85xx-sd-spi-boot
Fabio Estevam 45156edb16 README.mpc85xx-sd-spi-boot: Suggest the NXP boot format github repo
As explained in the text at the bottom of the page
https://source.codeaurora.org/external/qoriq/qoriq-yocto-sdk/boot-format:

"QUIC repositories on this site will not receive any updates after
March 31, 2022, and will be deleted on March 31, 2023."

Point to the NXP boot format github repo instead.

Signed-off-by: Fabio Estevam <festevam@denx.de>
Reviewed-by: Pali Rohár <pali@kernel.org>
2023-03-22 12:51:02 -04:00

75 lines
2.4 KiB
Text

----------------------------------------
Booting from On-Chip ROM (eSDHC or eSPI)
----------------------------------------
boot_format is a tool to write SD bootable images to a filesystem and build
SD/SPI images to a binary file for writing later.
When booting from an SD card/MMC, boot_format puts the configuration file and
the RAM-based U-Boot image on the card.
When booting from an EEPROM, boot_format generates a binary image that is used
to boot from this EEPROM.
Where to get boot_format:
========================
you can browse it online at:
https://github.com/nxp-qoriq-yocto-sdk/boot-format
Building
========
Run the following to build this project
$ make
Execution
=========
boot_format runs under a regular Linux machine and requires a super user mode
to run. Execute boot_format as follows.
For building SD images by writing directly to a file system on SD media:
$ boot_format $config u-boot.bin -sd $device
Where $config is the included config.dat file for your platform and $device
is the target block device for the SD media on your computer.
For build binary images directly a local file:
$ boot_format $config u-boot.bin -spi $file
Where $file is the target file. Also keep in mind the u-boot.bin file needs
to be the u-boot built for your particular platform and target media.
Example: To generate a u-boot.bin for a P1022DS booting from SD, run the
following in the u-boot repository:
$ make P1022DS_SDCARD
Configuration Files
===================
Below are the configuration files to be used with a particular platform. Keep
in mind that some of these config files are tied to the platforms DDR speed.
Please see the SoC reference manual for more documentation.
P1022DS config_sram_p1022ds.dat
P2020DS config_sram_p2020ds.dat
P1020RDB config_ddr2_1g_p1020rdb_533M.dat
P1020RDB config_ddr2_1g_p1020rdb_667M.dat
P2020RDB config_ddr2_1g_p2020rdb_800M.dat
P2020RDB config_ddr2_1g_p2020rdb_667M.dat
P2020RDB config_ddr3_1gb_64bit_p2020rdb_pc.dat
P1020RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1011RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1010RDB config_ddr3_1gb_p1010rdb_800M.dat
P1021RDB config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1022DS config_ddr3_2gb_p1022ds.dat
P1024RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
P1025RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
P1016RDB config_ddr3_1gb_p1_p2_rdb_pc_667M.dat
P1020UTM config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
P1020MBG config_ddr3_1gb_p1_p2_rdb_pc_800M.dat
MPC8536DS config_ddr2_512m_mpc8536ds_667M.dat