mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-12-15 07:43:07 +00:00
e3e01a6f94
The Renesas RZ/G2L SMARC Evaluation Board Kit consists of the RZ/G2L System-on-Module (SOM) based on the R9A07G044L2 SoC, and a common SMARC carrier board. This patch is based on the corresponding Linux v6.5 device tree (commit 52e12027d50affbf60c6c9c64db8017391b0c22e). Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
353 lines
7.8 KiB
Text
353 lines
7.8 KiB
Text
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
|
|
/*
|
|
* Device Tree Source for the RZ/{G2L,V2L} SMARC SOM common parts
|
|
*
|
|
* Copyright (C) 2021 Renesas Electronics Corp.
|
|
*/
|
|
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/interrupt-controller/irqc-rzg2l.h>
|
|
#include <dt-bindings/pinctrl/rzg2l-pinctrl.h>
|
|
|
|
/* SW1[2] should be at position 2/OFF to enable 64 GB eMMC */
|
|
#define EMMC 1
|
|
|
|
/*
|
|
* To enable uSD card on CN3,
|
|
* SW1[2] should be at position 3/ON.
|
|
* Disable eMMC by setting "#define EMMC 0" above.
|
|
*/
|
|
#define SDHI (!EMMC)
|
|
|
|
/ {
|
|
aliases {
|
|
ethernet0 = ð0;
|
|
ethernet1 = ð1;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
|
|
};
|
|
|
|
memory@48000000 {
|
|
device_type = "memory";
|
|
/* first 128MB is reserved for secure area. */
|
|
reg = <0x0 0x48000000 0x0 0x78000000>;
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.8V";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_1p1v: regulator-vdd-core {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-1.1V";
|
|
regulator-min-microvolt = <1100000>;
|
|
regulator-max-microvolt = <1100000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
vccq_sdhi0: regulator-vccq-sdhi0 {
|
|
compatible = "regulator-gpio";
|
|
|
|
regulator-name = "SDHI0 VccQ";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
states = <3300000 1>, <1800000 0>;
|
|
regulator-boot-on;
|
|
gpios = <&pinctrl RZG2L_GPIO(39, 0) GPIO_ACTIVE_HIGH>;
|
|
regulator-always-on;
|
|
};
|
|
};
|
|
|
|
&adc {
|
|
pinctrl-0 = <&adc_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
/delete-node/ channel@6;
|
|
/delete-node/ channel@7;
|
|
};
|
|
|
|
ð0 {
|
|
pinctrl-0 = <ð0_pins>;
|
|
pinctrl-names = "default";
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
|
|
phy0: ethernet-phy@7 {
|
|
compatible = "ethernet-phy-id0022.1640",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
reg = <7>;
|
|
interrupt-parent = <&irqc>;
|
|
interrupts = <RZG2L_IRQ2 IRQ_TYPE_LEVEL_LOW>;
|
|
rxc-skew-psec = <2400>;
|
|
txc-skew-psec = <2400>;
|
|
rxdv-skew-psec = <0>;
|
|
txdv-skew-psec = <0>;
|
|
rxd0-skew-psec = <0>;
|
|
rxd1-skew-psec = <0>;
|
|
rxd2-skew-psec = <0>;
|
|
rxd3-skew-psec = <0>;
|
|
txd0-skew-psec = <0>;
|
|
txd1-skew-psec = <0>;
|
|
txd2-skew-psec = <0>;
|
|
txd3-skew-psec = <0>;
|
|
};
|
|
};
|
|
|
|
ð1 {
|
|
pinctrl-0 = <ð1_pins>;
|
|
pinctrl-names = "default";
|
|
phy-handle = <&phy1>;
|
|
phy-mode = "rgmii-id";
|
|
status = "okay";
|
|
|
|
phy1: ethernet-phy@7 {
|
|
compatible = "ethernet-phy-id0022.1640",
|
|
"ethernet-phy-ieee802.3-c22";
|
|
reg = <7>;
|
|
interrupt-parent = <&irqc>;
|
|
interrupts = <RZG2L_IRQ3 IRQ_TYPE_LEVEL_LOW>;
|
|
rxc-skew-psec = <2400>;
|
|
txc-skew-psec = <2400>;
|
|
rxdv-skew-psec = <0>;
|
|
txdv-skew-psec = <0>;
|
|
rxd0-skew-psec = <0>;
|
|
rxd1-skew-psec = <0>;
|
|
rxd2-skew-psec = <0>;
|
|
rxd3-skew-psec = <0>;
|
|
txd0-skew-psec = <0>;
|
|
txd1-skew-psec = <0>;
|
|
txd2-skew-psec = <0>;
|
|
txd3-skew-psec = <0>;
|
|
};
|
|
};
|
|
|
|
&extal_clk {
|
|
clock-frequency = <24000000>;
|
|
};
|
|
|
|
&gpu {
|
|
mali-supply = <®_1p1v>;
|
|
};
|
|
|
|
&ostm1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&ostm2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&pinctrl {
|
|
adc_pins: adc {
|
|
pinmux = <RZG2L_PORT_PINMUX(9, 0, 2)>; /* ADC_TRG */
|
|
};
|
|
|
|
eth0_pins: eth0 {
|
|
pinmux = <RZG2L_PORT_PINMUX(28, 1, 1)>, /* ET0_LINKSTA */
|
|
<RZG2L_PORT_PINMUX(27, 1, 1)>, /* ET0_MDC */
|
|
<RZG2L_PORT_PINMUX(28, 0, 1)>, /* ET0_MDIO */
|
|
<RZG2L_PORT_PINMUX(20, 0, 1)>, /* ET0_TXC */
|
|
<RZG2L_PORT_PINMUX(20, 1, 1)>, /* ET0_TX_CTL */
|
|
<RZG2L_PORT_PINMUX(20, 2, 1)>, /* ET0_TXD0 */
|
|
<RZG2L_PORT_PINMUX(21, 0, 1)>, /* ET0_TXD1 */
|
|
<RZG2L_PORT_PINMUX(21, 1, 1)>, /* ET0_TXD2 */
|
|
<RZG2L_PORT_PINMUX(22, 0, 1)>, /* ET0_TXD3 */
|
|
<RZG2L_PORT_PINMUX(24, 0, 1)>, /* ET0_RXC */
|
|
<RZG2L_PORT_PINMUX(24, 1, 1)>, /* ET0_RX_CTL */
|
|
<RZG2L_PORT_PINMUX(25, 0, 1)>, /* ET0_RXD0 */
|
|
<RZG2L_PORT_PINMUX(25, 1, 1)>, /* ET0_RXD1 */
|
|
<RZG2L_PORT_PINMUX(26, 0, 1)>, /* ET0_RXD2 */
|
|
<RZG2L_PORT_PINMUX(26, 1, 1)>, /* ET0_RXD3 */
|
|
<RZG2L_PORT_PINMUX(1, 0, 1)>; /* IRQ2 */
|
|
};
|
|
|
|
eth1_pins: eth1 {
|
|
pinmux = <RZG2L_PORT_PINMUX(37, 2, 1)>, /* ET1_LINKSTA */
|
|
<RZG2L_PORT_PINMUX(37, 0, 1)>, /* ET1_MDC */
|
|
<RZG2L_PORT_PINMUX(37, 1, 1)>, /* ET1_MDIO */
|
|
<RZG2L_PORT_PINMUX(29, 0, 1)>, /* ET1_TXC */
|
|
<RZG2L_PORT_PINMUX(29, 1, 1)>, /* ET1_TX_CTL */
|
|
<RZG2L_PORT_PINMUX(30, 0, 1)>, /* ET1_TXD0 */
|
|
<RZG2L_PORT_PINMUX(30, 1, 1)>, /* ET1_TXD1 */
|
|
<RZG2L_PORT_PINMUX(31, 0, 1)>, /* ET1_TXD2 */
|
|
<RZG2L_PORT_PINMUX(31, 1, 1)>, /* ET1_TXD3 */
|
|
<RZG2L_PORT_PINMUX(33, 1, 1)>, /* ET1_RXC */
|
|
<RZG2L_PORT_PINMUX(34, 0, 1)>, /* ET1_RX_CTL */
|
|
<RZG2L_PORT_PINMUX(34, 1, 1)>, /* ET1_RXD0 */
|
|
<RZG2L_PORT_PINMUX(35, 0, 1)>, /* ET1_RXD1 */
|
|
<RZG2L_PORT_PINMUX(35, 1, 1)>, /* ET1_RXD2 */
|
|
<RZG2L_PORT_PINMUX(36, 0, 1)>, /* ET1_RXD3 */
|
|
<RZG2L_PORT_PINMUX(1, 1, 1)>; /* IRQ3 */
|
|
};
|
|
|
|
gpio-sd0-pwr-en-hog {
|
|
gpio-hog;
|
|
gpios = <RZG2L_GPIO(4, 1) GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "gpio_sd0_pwr_en";
|
|
};
|
|
|
|
qspi0_pins: qspi0 {
|
|
qspi0-data {
|
|
pins = "QSPI0_IO0", "QSPI0_IO1", "QSPI0_IO2", "QSPI0_IO3";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
qspi0-ctrl {
|
|
pins = "QSPI0_SPCLK", "QSPI0_SSL", "QSPI_RESET#";
|
|
power-source = <1800>;
|
|
};
|
|
};
|
|
|
|
/*
|
|
* SD0 device selection is XOR between GPIO_SD0_DEV_SEL and SW1[2]
|
|
* The below switch logic can be used to select the device between
|
|
* eMMC and microSD, after setting GPIO_SD0_DEV_SEL to high in DT.
|
|
* SW1[2] should be at position 2/OFF to enable 64 GB eMMC
|
|
* SW1[2] should be at position 3/ON to enable uSD card CN3
|
|
*/
|
|
sd0-dev-sel-hog {
|
|
gpio-hog;
|
|
gpios = <RZG2L_GPIO(41, 1) GPIO_ACTIVE_HIGH>;
|
|
output-high;
|
|
line-name = "sd0_dev_sel";
|
|
};
|
|
|
|
sdhi0_emmc_pins: sd0emmc {
|
|
sd0_emmc_data {
|
|
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3",
|
|
"SD0_DATA4", "SD0_DATA5", "SD0_DATA6", "SD0_DATA7";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sd0_emmc_ctrl {
|
|
pins = "SD0_CLK", "SD0_CMD";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sd0_emmc_rst {
|
|
pins = "SD0_RST#";
|
|
power-source = <1800>;
|
|
};
|
|
};
|
|
|
|
sdhi0_pins: sd0 {
|
|
sd0_data {
|
|
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
|
|
power-source = <3300>;
|
|
};
|
|
|
|
sd0_ctrl {
|
|
pins = "SD0_CLK", "SD0_CMD";
|
|
power-source = <3300>;
|
|
};
|
|
|
|
sd0_mux {
|
|
pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
|
|
};
|
|
};
|
|
|
|
sdhi0_pins_uhs: sd0_uhs {
|
|
sd0_data_uhs {
|
|
pins = "SD0_DATA0", "SD0_DATA1", "SD0_DATA2", "SD0_DATA3";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sd0_ctrl_uhs {
|
|
pins = "SD0_CLK", "SD0_CMD";
|
|
power-source = <1800>;
|
|
};
|
|
|
|
sd0_mux_uhs {
|
|
pinmux = <RZG2L_PORT_PINMUX(47, 0, 2)>; /* SD0_CD */
|
|
};
|
|
};
|
|
};
|
|
|
|
&sbc {
|
|
pinctrl-0 = <&qspi0_pins>;
|
|
pinctrl-names = "default";
|
|
status = "okay";
|
|
|
|
flash@0 {
|
|
compatible = "micron,mt25qu512a", "jedec,spi-nor";
|
|
reg = <0>;
|
|
m25p,fast-read;
|
|
spi-max-frequency = <50000000>;
|
|
spi-rx-bus-width = <4>;
|
|
|
|
partitions {
|
|
compatible = "fixed-partitions";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
boot@0 {
|
|
reg = <0x00000000 0x2000000>;
|
|
read-only;
|
|
};
|
|
user@2000000 {
|
|
reg = <0x2000000 0x2000000>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
#if SDHI
|
|
&sdhi0 {
|
|
pinctrl-0 = <&sdhi0_pins>;
|
|
pinctrl-1 = <&sdhi0_pins_uhs>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <&vccq_sdhi0>;
|
|
bus-width = <4>;
|
|
sd-uhs-sdr50;
|
|
sd-uhs-sdr104;
|
|
status = "okay";
|
|
};
|
|
#endif
|
|
|
|
#if EMMC
|
|
&sdhi0 {
|
|
pinctrl-0 = <&sdhi0_emmc_pins>;
|
|
pinctrl-1 = <&sdhi0_emmc_pins>;
|
|
pinctrl-names = "default", "state_uhs";
|
|
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
bus-width = <8>;
|
|
mmc-hs200-1_8v;
|
|
non-removable;
|
|
fixed-emmc-driver-type = <1>;
|
|
status = "okay";
|
|
};
|
|
#endif
|
|
|
|
&wdt0 {
|
|
status = "okay";
|
|
timeout-sec = <60>;
|
|
};
|
|
|
|
&wdt1 {
|
|
status = "okay";
|
|
timeout-sec = <60>;
|
|
};
|