mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-14 08:57:58 +00:00
8e0f8efe2a
This patchs adds the ethernet & MDIO driver for the MIPS Octeon II / III SoC platform. Please note that these drivers are based on the 2013 U-Boot version from Marvell and make use of the platform supported helper functions for the ethernet functionality, including stuff like SFP handling. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Joe Hershberger <joe.hershberger@ni.com>
1060 lines
29 KiB
C
1060 lines
29 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* Copyright (C) 2018-2022 Marvell International Ltd.
|
|
*/
|
|
|
|
#include <dm.h>
|
|
#include <dm/device_compat.h>
|
|
#include <env.h>
|
|
#include <net.h>
|
|
#include <netdev.h>
|
|
#include <malloc.h>
|
|
#include <miiphy.h>
|
|
#include <misc.h>
|
|
#include <asm/io.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <mach/cvmx-regs.h>
|
|
#include <mach/cvmx-csr.h>
|
|
#include <mach/cvmx-bootmem.h>
|
|
#include <mach/octeon-model.h>
|
|
#include <mach/cvmx-fuse.h>
|
|
#include <mach/octeon-feature.h>
|
|
#include <mach/octeon_fdt.h>
|
|
#include <mach/cvmx-qlm.h>
|
|
#include <mach/octeon_eth.h>
|
|
#include <mach/octeon_qlm.h>
|
|
#include <mach/cvmx-pcie.h>
|
|
#include <mach/cvmx-coremask.h>
|
|
|
|
#include <mach/cvmx-agl-defs.h>
|
|
#include <mach/cvmx-asxx-defs.h>
|
|
#include <mach/cvmx-bgxx-defs.h>
|
|
#include <mach/cvmx-dbg-defs.h>
|
|
#include <mach/cvmx-gmxx-defs.h>
|
|
#include <mach/cvmx-gserx-defs.h>
|
|
#include <mach/cvmx-ipd-defs.h>
|
|
#include <mach/cvmx-l2c-defs.h>
|
|
#include <mach/cvmx-npi-defs.h>
|
|
#include <mach/cvmx-pcsx-defs.h>
|
|
#include <mach/cvmx-pexp-defs.h>
|
|
#include <mach/cvmx-pki-defs.h>
|
|
#include <mach/cvmx-pko-defs.h>
|
|
#include <mach/cvmx-smix-defs.h>
|
|
#include <mach/cvmx-sriox-defs.h>
|
|
#include <mach/cvmx-xcv-defs.h>
|
|
#include <mach/cvmx-pcsxx-defs.h>
|
|
|
|
#include <mach/cvmx-helper.h>
|
|
#include <mach/cvmx-helper-board.h>
|
|
#include <mach/cvmx-helper-fdt.h>
|
|
#include <mach/cvmx-helper-bgx.h>
|
|
#include <mach/cvmx-helper-cfg.h>
|
|
|
|
#include <mach/cvmx-hwpko.h>
|
|
#include <mach/cvmx-pko.h>
|
|
#include <mach/cvmx-pki.h>
|
|
#include <mach/cvmx-config.h>
|
|
#include <mach/cvmx-mdio.h>
|
|
|
|
/** Maximum receive packet size (hardware default is 1536) */
|
|
#define CONFIG_OCTEON_NETWORK_MRU 1536
|
|
|
|
#define OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX "__tmp"
|
|
|
|
/**
|
|
* Enables RX packet debugging if octeon_debug_rx_packets is set in the
|
|
* environment.
|
|
*/
|
|
#define DEBUG_RX_PACKET
|
|
|
|
/**
|
|
* Enables TX packet debugging if octeon_debug_tx_packets is set in the
|
|
* environment.
|
|
*/
|
|
#define DEBUG_TX_PACKET
|
|
|
|
/* Global flag indicating common hw has been set up */
|
|
static int octeon_global_hw_inited;
|
|
|
|
#if defined(DEBUG_RX_PACKET) || defined(DEBUG_TX_PACKET)
|
|
static int packet_rx_debug;
|
|
static int packet_tx_debug;
|
|
#endif
|
|
|
|
/* Make sure that we have enough buffers to keep prefetching blocks happy.
|
|
* Absolute minimum is probably about 200.
|
|
*/
|
|
#define NUM_PACKET_BUFFERS 1000
|
|
|
|
#define PKO_SHUTDOWN_TIMEOUT_VAL 100
|
|
|
|
/* Define the offsets from the base CSR */
|
|
#define GMX_PRT_CFG 0x10
|
|
|
|
#define GMX_RX_FRM_MAX 0x30
|
|
#define GMX_RX_JABBER 0x38
|
|
|
|
#define GMX_RX_ADR_CTL 0x100
|
|
#define GMX_RX_ADR_CAM_EN 0x108
|
|
#define GMX_RX_ADR_CAM0 0x180
|
|
#define GMX_RX_ADR_CAM1 0x188
|
|
#define GMX_RX_ADR_CAM2 0x190
|
|
#define GMX_RX_ADR_CAM3 0x198
|
|
#define GMX_RX_ADR_CAM4 0x1a0
|
|
#define GMX_RX_ADR_CAM5 0x1a8
|
|
#define GMX_TX_OVR_BP 0x4c8
|
|
|
|
/**
|
|
* Set the hardware MAC address for a device
|
|
*
|
|
* @param interface interface of port to set
|
|
* @param index index of port to set MAC address for
|
|
* @param addr Address structure to change it too.
|
|
* @return Zero on success
|
|
*/
|
|
static int cvm_oct_set_mac_address(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
cvmx_gmxx_prtx_cfg_t gmx_cfg;
|
|
cvmx_helper_interface_mode_t mode;
|
|
cvmx_gmxx_rxx_adr_ctl_t control;
|
|
u8 *ptr = (uint8_t *)pdata->enetaddr;
|
|
int interface = priv->interface;
|
|
int index = priv->index;
|
|
u64 mac = 0;
|
|
u64 gmx_reg;
|
|
int xipd_port;
|
|
int i;
|
|
|
|
for (i = 0; i < 6; i++)
|
|
mac = (mac << 8) | (u64)(ptr[i]);
|
|
|
|
debug("%s(%s (%pM))\n", __func__, dev->name, ptr);
|
|
mode = cvmx_helper_interface_get_mode(interface);
|
|
|
|
/* It's rather expensive to change the MAC address for BGX so we only
|
|
* do this if it has changed or not been set previously.
|
|
*/
|
|
if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
|
|
xipd_port = cvmx_helper_get_ipd_port(interface, index);
|
|
if (priv->last_bgx_mac != mac || !priv->bgx_mac_set) {
|
|
cvmx_helper_bgx_set_mac(xipd_port, 1, 2, mac);
|
|
priv->last_bgx_mac = mac;
|
|
priv->bgx_mac_set = 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
if (mode == CVMX_HELPER_INTERFACE_MODE_AGL) {
|
|
gmx_reg = CVMX_AGL_GMX_RXX_INT_REG(0);
|
|
} else {
|
|
gmx_reg = CVMX_GMXX_RXX_INT_REG(index, interface);
|
|
csr_wr(CVMX_GMXX_SMACX(index, interface), mac);
|
|
}
|
|
|
|
/* Disable interface */
|
|
gmx_cfg.u64 = csr_rd(gmx_reg + GMX_PRT_CFG);
|
|
csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64 & ~1ull);
|
|
debug("%s: gmx reg: 0x%llx\n", __func__, gmx_reg);
|
|
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM0, ptr[0]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM1, ptr[1]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM2, ptr[2]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM3, ptr[3]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM4, ptr[4]);
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM5, ptr[5]);
|
|
|
|
control.u64 = 0;
|
|
control.s.bcst = 1; /* Allow broadcast MAC addresses */
|
|
control.s.mcst = 1; /* Force reject multicast packets */
|
|
control.s.cam_mode = 1; /* Filter packets based on the CAM */
|
|
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CTL, control.u64);
|
|
|
|
csr_wr(gmx_reg + GMX_RX_ADR_CAM_EN, 1);
|
|
|
|
/* Return interface to previous enable state */
|
|
csr_wr(gmx_reg + GMX_PRT_CFG, gmx_cfg.u64);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void cvm_oct_fill_hw_memory(u64 pool, u64 size, u64 elements)
|
|
{
|
|
static int alloc_count;
|
|
char tmp_name[64];
|
|
int ret;
|
|
|
|
debug("%s: pool: 0x%llx, size: 0xx%llx, count: 0x%llx\n",
|
|
__func__, pool, size, elements);
|
|
sprintf(tmp_name, "%s_fpa_alloc_%d",
|
|
OCTEON_BOOTLOADER_NAMED_BLOCK_TMP_PREFIX, alloc_count++);
|
|
ret = cvmx_fpa_setup_pool(pool, tmp_name, NULL, size, elements);
|
|
}
|
|
|
|
/**
|
|
* Configure common hardware for all interfaces
|
|
*/
|
|
static void cvm_oct_configure_common_hw(void)
|
|
{
|
|
int mru = env_get_ulong("octeon_mru", 0, CONFIG_OCTEON_NETWORK_MRU);
|
|
int packet_pool_size = CVMX_FPA_PACKET_POOL_SIZE;
|
|
|
|
if (mru > packet_pool_size)
|
|
packet_pool_size = (mru + CVMX_CACHE_LINE_SIZE - 1) &
|
|
~(CVMX_CACHE_LINE_SIZE - 1);
|
|
|
|
/* Setup the FPA */
|
|
cvmx_fpa_enable();
|
|
|
|
cvm_oct_fill_hw_memory(CVMX_FPA_WQE_POOL, CVMX_FPA_WQE_POOL_SIZE,
|
|
NUM_PACKET_BUFFERS);
|
|
#if CVMX_FPA_OUTPUT_BUFFER_POOL != CVMX_FPA_PACKET_POOL
|
|
if (!octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE)) {
|
|
cvm_oct_fill_hw_memory(CVMX_FPA_OUTPUT_BUFFER_POOL,
|
|
CVMX_FPA_OUTPUT_BUFFER_POOL_SIZE, 128);
|
|
}
|
|
#endif
|
|
cvm_oct_fill_hw_memory(CVMX_FPA_PACKET_POOL, packet_pool_size,
|
|
NUM_PACKET_BUFFERS);
|
|
|
|
cvmx_helper_initialize_packet_io_global();
|
|
cvmx_helper_initialize_packet_io_local();
|
|
|
|
/* The MRU defaults to 1536 bytes by the hardware. Setting
|
|
* CONFIG_OCTEON_NETWORK_MRU allows this to be overridden.
|
|
*/
|
|
if (octeon_has_feature(OCTEON_FEATURE_PKI)) {
|
|
struct cvmx_pki_global_config gbl_cfg;
|
|
int i;
|
|
|
|
cvmx_pki_read_global_config(0, &gbl_cfg);
|
|
for (i = 0; i < CVMX_PKI_NUM_FRAME_CHECK; i++)
|
|
gbl_cfg.frm_len[i].maxlen = mru;
|
|
cvmx_pki_write_global_config(0, &gbl_cfg);
|
|
}
|
|
|
|
/* Set POW get work timeout to maximum value */
|
|
if (octeon_has_feature(OCTEON_FEATURE_CN68XX_WQE) ||
|
|
octeon_has_feature(OCTEON_FEATURE_CN78XX_WQE))
|
|
csr_wr(CVMX_SSO_NW_TIM, 0x3ff);
|
|
else
|
|
csr_wr(CVMX_POW_NW_TIM, 0x3ff);
|
|
}
|
|
|
|
/**
|
|
* Enables Ethernet devices to allow packets to be transmitted and received.
|
|
* For example, this is activated when the DHCP command is issued.
|
|
*
|
|
* @param dev Ethernet device to initialize
|
|
* @param bis board data structure, not used.
|
|
*
|
|
* @return 1 for success
|
|
*/
|
|
int octeon_eth_init(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
|
|
debug("%s(), dev_ptr: %p, dev: %s, port: %d\n", __func__, dev,
|
|
dev->name, priv->port);
|
|
|
|
if (priv->initted_flag) {
|
|
debug("%s already initialized\n", dev->name);
|
|
return 1;
|
|
}
|
|
|
|
if (!octeon_global_hw_inited) {
|
|
debug("Initializing common hardware\n");
|
|
cvm_oct_configure_common_hw();
|
|
}
|
|
|
|
/* Ignore backpressure on RGMII ports */
|
|
if (!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
csr_wr(priv->gmx_base + GMX_TX_OVR_BP, 0xf << 8 | 0xf);
|
|
|
|
debug("%s: Setting MAC address\n", __func__);
|
|
cvm_oct_set_mac_address(dev);
|
|
|
|
if (!octeon_global_hw_inited) {
|
|
debug("Enabling packet input\n");
|
|
cvmx_helper_ipd_and_packet_input_enable();
|
|
octeon_global_hw_inited = 1;
|
|
|
|
/* Connect, configure and start the PHY, if the device is
|
|
* connected to one. If not, then it's most likely an SPF
|
|
* enabled port, which does not have such PHY setup here.
|
|
*/
|
|
if (priv->mdio_dev) {
|
|
priv->phy_dev = dm_eth_phy_connect(dev);
|
|
phy_config(priv->phy_dev);
|
|
phy_startup(priv->phy_dev);
|
|
}
|
|
}
|
|
priv->enabled = 0;
|
|
priv->initted_flag = 1;
|
|
|
|
debug("%s exiting successfully\n", __func__);
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* Initializes the specified interface and port
|
|
*
|
|
* @param interface interface to initialize
|
|
* @param index port index on interface
|
|
* @param port ipd port number
|
|
* @param if_mode interface mode
|
|
*
|
|
* @return 0 for success, -1 if out of memory, 1 if port is invalid
|
|
*/
|
|
static int octeon_eth_initialize(struct udevice *dev, int interface,
|
|
int index, int port,
|
|
cvmx_helper_interface_mode_t if_mode)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
int eth;
|
|
|
|
eth = cvmx_helper_get_port_fdt_node_offset(interface, index);
|
|
if (eth <= 0) {
|
|
debug("ERROR: No fdt node for interface %d, index %d\n",
|
|
interface, index);
|
|
return 1;
|
|
}
|
|
|
|
oct_eth_info->is_c45 = (if_mode == CVMX_HELPER_INTERFACE_MODE_XAUI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_RXAUI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_XFI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_XLAUI) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR) ||
|
|
(if_mode == CVMX_HELPER_INTERFACE_MODE_10G_KR);
|
|
oct_eth_info->port = port;
|
|
oct_eth_info->index = index;
|
|
oct_eth_info->interface = interface;
|
|
oct_eth_info->initted_flag = 0;
|
|
/* This is guaranteed to force the link state to be printed out */
|
|
oct_eth_info->link_state = 0xffffffffffffffffULL;
|
|
debug("Setting up port: %d, int: %d, index: %d, device: octeth%d\n",
|
|
oct_eth_info->port, oct_eth_info->interface, oct_eth_info->index,
|
|
dev_seq(dev));
|
|
if (if_mode == CVMX_HELPER_INTERFACE_MODE_AGL) {
|
|
oct_eth_info->gmx_base = CVMX_AGL_GMX_RXX_INT_REG(0);
|
|
} else {
|
|
if (!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
oct_eth_info->gmx_base =
|
|
CVMX_GMXX_RXX_INT_REG(index, interface);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Converts a BGX address to the node, interface and port number
|
|
*
|
|
* @param bgx_addr Address of CSR register
|
|
*
|
|
* @return node, interface and port number, will be -1 for invalid address.
|
|
*/
|
|
static struct cvmx_xiface __cvmx_bgx_reg_addr_to_xiface(u64 bgx_addr)
|
|
{
|
|
struct cvmx_xiface xi = { -1, -1 };
|
|
|
|
xi.node = cvmx_csr_addr_to_node(bgx_addr);
|
|
bgx_addr = cvmx_csr_addr_strip_node(bgx_addr);
|
|
if ((bgx_addr & 0xFFFFFFFFF0000000) != 0x00011800E0000000) {
|
|
debug("%s: Invalid BGX address 0x%llx\n", __func__,
|
|
(unsigned long long)bgx_addr);
|
|
xi.node = -1;
|
|
return xi;
|
|
}
|
|
xi.interface = (bgx_addr >> 24) & 0x0F;
|
|
|
|
return xi;
|
|
}
|
|
|
|
static int octeon_nic_probe(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *info = dev_get_priv(dev);
|
|
struct ofnode_phandle_args phandle;
|
|
struct cvmx_xiface xi;
|
|
ofnode node, mdio_node;
|
|
int ipd_port;
|
|
int intf;
|
|
int ret;
|
|
|
|
/* The empty stub is to keep cvmx_user_app_init() happy. */
|
|
cvmx_npi_max_pknds = 1;
|
|
__cvmx_helper_init_port_valid();
|
|
|
|
xi = __cvmx_bgx_reg_addr_to_xiface(dev_read_addr(dev));
|
|
intf = xi.interface;
|
|
debug("%s: Found BGX node %d, interface %d\n", __func__, xi.node, intf);
|
|
|
|
ipd_port = cvmx_helper_get_ipd_port(intf, xi.node);
|
|
ret = octeon_eth_initialize(dev, intf, xi.node, ipd_port,
|
|
cvmx_helper_interface_get_mode(intf));
|
|
|
|
/* Move to subnode, as this includes the "phy-handle" */
|
|
node = dev_read_first_subnode(dev);
|
|
|
|
/* Check if an SPF module is conneted, then no MDIO is probed */
|
|
ret = ofnode_parse_phandle_with_args(node, "sfp-slot", NULL, 0, 0,
|
|
&phandle);
|
|
if (!ret) {
|
|
dev_dbg(dev, "sfp-slot found, not probing for MDIO\n");
|
|
return 0;
|
|
}
|
|
|
|
/* Continue with MDIO probing */
|
|
ret = ofnode_parse_phandle_with_args(node, "phy-handle", NULL, 0, 0,
|
|
&phandle);
|
|
if (ret) {
|
|
dev_err(dev, "phy-handle not found in subnode\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
/* Get MDIO node */
|
|
mdio_node = ofnode_get_parent(phandle.node);
|
|
ret = uclass_get_device_by_ofnode(UCLASS_MDIO, mdio_node,
|
|
&info->mdio_dev);
|
|
if (ret) {
|
|
dev_err(dev, "mdio_dev not found\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Sets the hardware MAC address of the Ethernet device
|
|
*
|
|
* @param dev - Ethernet device
|
|
*
|
|
* @return 0 for success
|
|
*/
|
|
int octeon_eth_write_hwaddr(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
struct eth_pdata *pdata = dev_get_plat(dev);
|
|
|
|
/* Skip if the interface isn't yet enabled */
|
|
if (!oct_eth_info->enabled) {
|
|
debug("%s: Interface not enabled, not setting MAC address\n",
|
|
__func__);
|
|
return 0;
|
|
}
|
|
debug("%s: Setting %s address to %02x:%02x:%02x:%02x:%02x:%02x\n",
|
|
__func__, dev->name, pdata->enetaddr[0], pdata->enetaddr[1],
|
|
pdata->enetaddr[2], pdata->enetaddr[3], pdata->enetaddr[4],
|
|
pdata->enetaddr[5]);
|
|
return cvm_oct_set_mac_address(dev);
|
|
}
|
|
|
|
/**
|
|
* Enables and disables the XCV RGMII interface
|
|
*
|
|
* @param interface Interface number
|
|
* @param index Port index (should be 0 for RGMII)
|
|
* @param enable True to enable it, false to disable it
|
|
*/
|
|
static void octeon_bgx_xcv_rgmii_enable(int interface, int index, bool enable)
|
|
{
|
|
union cvmx_xcv_reset xcv_reset;
|
|
|
|
debug("%s(%d, %d, %sable)\n", __func__, interface, index,
|
|
enable ? "en" : "dis");
|
|
xcv_reset.u64 = csr_rd(CVMX_XCV_RESET);
|
|
xcv_reset.s.rx_pkt_rst_n = enable ? 1 : 0;
|
|
csr_wr(CVMX_XCV_RESET, xcv_reset.u64);
|
|
}
|
|
|
|
/**
|
|
* Enables a SGMII interface
|
|
*
|
|
* @param dev - Ethernet device to initialize
|
|
*/
|
|
void octeon_eth_sgmii_enable(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info;
|
|
cvmx_gmxx_prtx_cfg_t gmx_cfg;
|
|
int index, interface;
|
|
cvmx_helper_interface_mode_t if_mode;
|
|
|
|
oct_eth_info = dev_get_priv(dev);
|
|
interface = oct_eth_info->interface;
|
|
index = oct_eth_info->index;
|
|
|
|
debug("%s(%s) (%d.%d)\n", __func__, dev->name, interface, index);
|
|
if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
|
|
cvmx_bgxx_cmrx_config_t cmr_config;
|
|
|
|
cmr_config.u64 =
|
|
csr_rd(CVMX_BGXX_CMRX_CONFIG(index, interface));
|
|
cmr_config.s.enable = 1;
|
|
cmr_config.s.data_pkt_tx_en = 1;
|
|
cmr_config.s.data_pkt_rx_en = 1;
|
|
csr_wr(CVMX_BGXX_CMRX_CONFIG(index, interface), cmr_config.u64);
|
|
mdelay(100);
|
|
if (cvmx_helper_bgx_is_rgmii(interface, index))
|
|
octeon_bgx_xcv_rgmii_enable(interface, index, true);
|
|
} else {
|
|
if_mode = cvmx_helper_interface_get_mode(interface);
|
|
/* Normal operating mode. */
|
|
|
|
if (if_mode == CVMX_HELPER_INTERFACE_MODE_SGMII ||
|
|
if_mode == CVMX_HELPER_INTERFACE_MODE_QSGMII) {
|
|
cvmx_pcsx_miscx_ctl_reg_t pcsx_miscx_ctl_reg;
|
|
|
|
debug(" if mode: (Q)SGMII\n");
|
|
pcsx_miscx_ctl_reg.u64 = csr_rd(CVMX_PCSX_MISCX_CTL_REG(index, interface));
|
|
pcsx_miscx_ctl_reg.s.gmxeno = 0;
|
|
csr_wr(CVMX_PCSX_MISCX_CTL_REG(index, interface),
|
|
pcsx_miscx_ctl_reg.u64);
|
|
} else if (if_mode != CVMX_HELPER_INTERFACE_MODE_AGL) {
|
|
cvmx_pcsxx_misc_ctl_reg_t pcsxx_misc_ctl_reg;
|
|
|
|
debug(" if mode: AGM\n");
|
|
pcsxx_misc_ctl_reg.u64 =
|
|
csr_rd(CVMX_PCSXX_MISC_CTL_REG(interface));
|
|
pcsxx_misc_ctl_reg.s.gmxeno = 0;
|
|
csr_wr(CVMX_PCSXX_MISC_CTL_REG(interface),
|
|
pcsxx_misc_ctl_reg.u64);
|
|
}
|
|
|
|
gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
|
|
gmx_cfg.s.en = 1;
|
|
csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64);
|
|
gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Enables an Ethernet interface
|
|
*
|
|
* @param dev - Ethernet device to enable
|
|
*/
|
|
void octeon_eth_enable(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info;
|
|
u64 tmp;
|
|
int interface;
|
|
cvmx_helper_interface_mode_t if_mode;
|
|
|
|
oct_eth_info = dev_get_priv(dev);
|
|
interface = oct_eth_info->interface;
|
|
if_mode = cvmx_helper_interface_get_mode(interface);
|
|
|
|
switch (if_mode) {
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
debug(" rgmii/gmii mode\n");
|
|
tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(interface));
|
|
tmp |= (1ull << (oct_eth_info->port & 0x3));
|
|
csr_wr(CVMX_ASXX_RX_PRT_EN(interface), tmp);
|
|
tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(interface));
|
|
tmp |= (1ull << (oct_eth_info->port & 0x3));
|
|
csr_wr(CVMX_ASXX_TX_PRT_EN(interface), tmp);
|
|
octeon_eth_write_hwaddr(dev);
|
|
break;
|
|
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_RXAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XLAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XFI:
|
|
case CVMX_HELPER_INTERFACE_MODE_10G_KR:
|
|
case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
|
|
case CVMX_HELPER_INTERFACE_MODE_MIXED:
|
|
case CVMX_HELPER_INTERFACE_MODE_AGL:
|
|
debug(" SGMII/XAUI/etc.\n");
|
|
octeon_eth_sgmii_enable(dev);
|
|
octeon_eth_write_hwaddr(dev);
|
|
break;
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
void octeon_phy_port_check(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
struct phy_device *phydev = oct_eth_info->phydev;
|
|
|
|
if (oct_eth_info->phy_port_check)
|
|
oct_eth_info->phy_port_check(phydev);
|
|
}
|
|
|
|
/**
|
|
* Configure the RGMII port for the negotiated speed
|
|
*
|
|
* @param dev Linux device for the RGMII port
|
|
*/
|
|
static void cvm_oct_configure_rgmii_speed(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
int port = priv->port;
|
|
cvmx_helper_link_info_t link_state = cvmx_helper_link_get(port);
|
|
|
|
/* If the port is down some PHYs we need to check modules, etc. */
|
|
if (!link_state.s.link_up)
|
|
octeon_phy_port_check(dev);
|
|
|
|
if (link_state.u64 != priv->link_state) {
|
|
cvmx_helper_interface_mode_t mode;
|
|
|
|
octeon_phy_port_check(dev);
|
|
|
|
debug("%s(%s): Link state changed\n", __func__, dev->name);
|
|
printf("%s: ", dev->name);
|
|
if (!link_state.s.link_up) {
|
|
puts("Down ");
|
|
} else {
|
|
printf("Up %d Mbps ", link_state.s.speed);
|
|
if (link_state.s.full_duplex)
|
|
puts("Full duplex ");
|
|
else
|
|
puts("Half duplex ");
|
|
}
|
|
mode = cvmx_helper_interface_get_mode(priv->interface);
|
|
printf("(port %2d) (%s)\n", port,
|
|
cvmx_helper_interface_mode_to_string(mode));
|
|
debug("%s: Setting link state\n", __func__);
|
|
cvmx_helper_link_set(priv->port, link_state);
|
|
priv->link_state = link_state.u64;
|
|
}
|
|
}
|
|
|
|
#if defined(DEBUG_TX_PACKET) || defined(DEBUG_RX_PACKET)
|
|
static void print_mac(const char *label, const uint8_t *mac_addr)
|
|
{
|
|
printf("%s: %02x:%02x:%02x:%02x:%02x:%02x", label, mac_addr[0],
|
|
mac_addr[1], mac_addr[2], mac_addr[3], mac_addr[4], mac_addr[5]);
|
|
}
|
|
|
|
static void print_ip(const void *packet)
|
|
{
|
|
u8 *p = (uint8_t *)packet;
|
|
u16 length;
|
|
u8 hdr_len;
|
|
|
|
puts("IP Header:\n");
|
|
if ((p[0] & 0xF0) != 0x40) {
|
|
printf("Invalid IP version %d\n", *p >> 4);
|
|
return;
|
|
}
|
|
hdr_len = *p & 0x0F;
|
|
if (hdr_len < 5)
|
|
printf("Invalid IP header length %d\n", hdr_len);
|
|
printf(" Version: 4, Header length: %d\n", hdr_len);
|
|
length = (p[2] << 8) | p[3];
|
|
printf(" TOS: 0x%02x, length: %d\n", p[1], length);
|
|
printf(" ID: %d, %s%s%s fragment offset: %d\n", (p[4] << 8) | p[5],
|
|
p[6] & 0x80 ? "congested, " : "", p[6] & 0x40 ? "DF, " : "",
|
|
p[6] & 0x20 ? "MF, " : "", ((p[6] & 0x1F) << 8) | p[7]);
|
|
printf(" TTL: %d, Protocol: %d, Header Checksum: 0x%x\n", p[8], p[9],
|
|
(p[10] << 8) | p[11]);
|
|
printf(" Source IP: %d.%d.%d.%d\n Destination IP: %d.%d.%d.%d\n",
|
|
p[12], p[13], p[14], p[15], p[16], p[17], p[18], p[19]);
|
|
if (p[9] == 17 || p[9] == 6)
|
|
printf(" Source port: %u, Destination port: %u\n",
|
|
(p[20] << 8) | p[21], (p[22] << 8) | p[23]);
|
|
puts("\n");
|
|
}
|
|
|
|
/**
|
|
* Prints out a packet for debugging purposes
|
|
*
|
|
* @param[in] packet - pointer to packet data
|
|
* @param length - length of packet in bytes
|
|
*/
|
|
static void print_packet(const void *packet, int length)
|
|
{
|
|
int i, j;
|
|
const unsigned char *up = packet;
|
|
u16 type = (up[12] << 8 | up[13]);
|
|
int start = 14;
|
|
|
|
print_mac("DMAC", &up[0]);
|
|
puts(" ");
|
|
print_mac("SMAC", &up[6]);
|
|
printf(" TYPE: %04x\n", type);
|
|
|
|
if (type == 0x0800)
|
|
print_ip(&up[start]);
|
|
|
|
for (i = start; (i + 16) < length; i += 16) {
|
|
printf("%04x ", i);
|
|
for (j = 0; j < 16; ++j)
|
|
printf("%02x ", up[i + j]);
|
|
|
|
printf(" ");
|
|
for (j = 0; j < 16; ++j)
|
|
printf("%c",
|
|
((up[i + j] >= ' ') && (up[i + j] <= '~')) ?
|
|
up[i + j] :
|
|
'.');
|
|
printf("\n");
|
|
}
|
|
printf("%04x ", i);
|
|
for (j = 0; i + j < length; ++j)
|
|
printf("%02x ", up[i + j]);
|
|
|
|
for (; j < 16; ++j)
|
|
printf(" ");
|
|
|
|
printf(" ");
|
|
for (j = 0; i + j < length; ++j)
|
|
printf("%c", ((up[i + j] >= ' ') && (up[i + j] <= '~')) ?
|
|
up[i + j] :
|
|
'.');
|
|
|
|
printf("\n");
|
|
}
|
|
#endif
|
|
|
|
/**
|
|
* String representation of error codes.
|
|
*/
|
|
static const char * const rx_error_codes[] = {
|
|
"OK",
|
|
"partial",
|
|
"jabber",
|
|
"overrun",
|
|
"oversize",
|
|
"alignment",
|
|
"fragment",
|
|
"fcs",
|
|
"undersize",
|
|
"extend",
|
|
"length mismatch",
|
|
"rgmii rx",
|
|
"skip error",
|
|
"nibble error (studder)",
|
|
"(undefined)",
|
|
"(undefined)",
|
|
"SPI 4.2 FCS",
|
|
"skip",
|
|
"L2 malformed",
|
|
};
|
|
|
|
/**
|
|
* Called to receive a packet
|
|
*
|
|
* @param dev - device to receive on
|
|
*
|
|
* @return - length of packet
|
|
*
|
|
* This function is used to poll packets. In turn it calls NetReceive
|
|
* to process the packets.
|
|
*/
|
|
static int nic_recv(struct udevice *dev, int flags, uchar **packetp)
|
|
{
|
|
cvmx_wqe_t *work = cvmx_pow_work_request_sync(CVMX_POW_WAIT);
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
cvmx_buf_ptr_t buf_ptr;
|
|
void *packet_data;
|
|
int length;
|
|
int error_code;
|
|
|
|
if (!oct_eth_info->enabled) {
|
|
oct_eth_info->enabled = 1;
|
|
debug("%s: Enabling interface %s\n", __func__, dev->name);
|
|
octeon_eth_enable(dev);
|
|
}
|
|
|
|
if (!work) {
|
|
/*
|
|
* Somtimes the link is not up yet. Return here in this
|
|
* case, this function will be called again later.
|
|
*/
|
|
return 0;
|
|
}
|
|
|
|
error_code = cvmx_wqe_get_rcv_err(work);
|
|
if (error_code) {
|
|
/* Work has error, so drop */
|
|
cvmx_helper_free_packet_data(work);
|
|
cvmx_wqe_free(work);
|
|
if (error_code < ARRAY_SIZE(rx_error_codes) &&
|
|
!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
printf("Receive error (code %d: %s), dropping\n",
|
|
error_code, rx_error_codes[error_code]);
|
|
else
|
|
printf("Receive error (code %d (unknown), dropping\n",
|
|
error_code);
|
|
return 0;
|
|
}
|
|
if (cvmx_wqe_get_bufs(work) != 1) {
|
|
/* can only support single-buffer packets */
|
|
printf("Abnormal packet received in %u bufs, dropping\n",
|
|
cvmx_wqe_get_bufs(work));
|
|
length = cvmx_wqe_get_len(work);
|
|
buf_ptr = cvmx_wqe_get_packet_ptr(work);
|
|
packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr);
|
|
print_packet(packet_data, length);
|
|
cvmx_helper_free_packet_data(work);
|
|
cvmx_wqe_free(work);
|
|
return 0;
|
|
}
|
|
|
|
buf_ptr = cvmx_wqe_get_packet_ptr(work);
|
|
packet_data = cvmx_phys_to_ptr(buf_ptr.s.addr);
|
|
length = cvmx_wqe_get_len(work);
|
|
|
|
oct_eth_info->packets_received++;
|
|
debug("############# got work: %p, len: %d, packet_ptr: %p\n", work,
|
|
length, packet_data);
|
|
#if defined(DEBUG_RX_PACKET)
|
|
if (packet_rx_debug) {
|
|
printf("\nRX packet: interface: %d, index: %d\n",
|
|
oct_eth_info->interface, oct_eth_info->index);
|
|
print_packet(packet_data, length);
|
|
}
|
|
#endif
|
|
*packetp = (uchar *)packet_data;
|
|
|
|
/* Save work for free_pkt() */
|
|
oct_eth_info->work = work;
|
|
|
|
/* Free WQE and packet data */
|
|
return length;
|
|
}
|
|
|
|
static int nic_free_pkt(struct udevice *dev, uchar *pkt, int pkt_len)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
cvmx_wqe_t *work = oct_eth_info->work;
|
|
|
|
if (!work)
|
|
return 0;
|
|
|
|
cvmx_helper_free_packet_data(work);
|
|
cvmx_wqe_free(work);
|
|
oct_eth_info->work = NULL;
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* Packet transmit
|
|
*
|
|
* @param skb Packet to send
|
|
* @param dev Device info structure
|
|
* @return Always returns zero
|
|
*/
|
|
static int cvm_oct_xmit(struct udevice *dev, void *packet, int len)
|
|
{
|
|
struct octeon_eth_info *priv = dev_get_priv(dev);
|
|
int queue = cvmx_pko_get_base_queue(priv->port);
|
|
cvmx_pko_command_word0_t pko_command;
|
|
cvmx_buf_ptr_t hw_buffer;
|
|
int rv;
|
|
|
|
debug("%s: addr: %p, len: %d\n", __func__, packet, len);
|
|
|
|
hw_buffer.u64 = 0;
|
|
hw_buffer.s.addr = cvmx_ptr_to_phys(packet);
|
|
hw_buffer.s.pool = CVMX_FPA_PACKET_POOL;
|
|
hw_buffer.s.size = len;
|
|
hw_buffer.s.back = 0;
|
|
|
|
/* Build the PKO command */
|
|
pko_command.u64 = 0;
|
|
pko_command.s.subone0 = 1;
|
|
pko_command.s.dontfree = 0;
|
|
pko_command.s.segs = 1;
|
|
pko_command.s.total_bytes = len;
|
|
/* Send the packet to the output queue */
|
|
|
|
debug("%s: port: %d, queue: %d\n", __func__, priv->port, queue);
|
|
cvmx_pko_send_packet_prepare(priv->port, queue, 0);
|
|
rv = cvmx_pko_send_packet_finish(priv->port, queue, pko_command,
|
|
hw_buffer, 0);
|
|
if (rv)
|
|
printf("Failed to send the packet rv=%d\n", rv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int nic_xmit(struct udevice *dev, void *pkt, int pkt_len)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
void *fpa_buf = cvmx_fpa_alloc(CVMX_FPA_PACKET_POOL);
|
|
|
|
if (!oct_eth_info->enabled) {
|
|
oct_eth_info->enabled = 1;
|
|
octeon_eth_enable(dev);
|
|
}
|
|
|
|
/* We need to copy this to a FPA buffer, then give that to TX */
|
|
|
|
if (oct_eth_info->packets_sent == 0 &&
|
|
!octeon_has_feature(OCTEON_FEATURE_BGX))
|
|
cvm_oct_configure_rgmii_speed(dev);
|
|
|
|
if (!fpa_buf) {
|
|
printf("ERROR allocating buffer for packet!\n");
|
|
return -1;
|
|
}
|
|
|
|
memcpy(fpa_buf, pkt, pkt_len);
|
|
#ifdef DEBUG_TX_PACKET
|
|
if (packet_tx_debug) {
|
|
printf("\nTX packet: interface: %d, index: %d\n",
|
|
oct_eth_info->interface, oct_eth_info->index);
|
|
print_packet(pkt, pkt_len);
|
|
}
|
|
#endif
|
|
cvm_oct_xmit(dev, fpa_buf, pkt_len);
|
|
oct_eth_info->packets_sent++;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int nic_open(struct udevice *dev)
|
|
{
|
|
octeon_eth_init(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void octeon_eth_halt_bgx(struct udevice *dev,
|
|
cvmx_helper_interface_mode_t mode)
|
|
{
|
|
union cvmx_bgxx_cmrx_config cmr_config;
|
|
union cvmx_bgxx_cmr_rx_adrx_cam cmr_cam;
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
int index = oct_eth_info->index;
|
|
int xiface = oct_eth_info->interface;
|
|
struct cvmx_xiface xi = cvmx_helper_xiface_to_node_interface(xiface);
|
|
|
|
debug("%s(%s(%d.%d), %d)\n", __func__, dev->name, xiface, index, mode);
|
|
|
|
/* For RGMII we need to properly shut down the XCV interface */
|
|
if (cvmx_helper_bgx_is_rgmii(xiface, index)) {
|
|
debug(" Shut down XCV RGMII\n");
|
|
octeon_bgx_xcv_rgmii_enable(xi.interface, index, false);
|
|
} else {
|
|
cmr_config.u64 = csr_rd_node(xi.node,
|
|
CVMX_BGXX_CMRX_CONFIG(index, xi.interface));
|
|
cmr_config.s.data_pkt_tx_en = 0;
|
|
cmr_config.s.data_pkt_rx_en = 0;
|
|
csr_wr_node(xi.node, CVMX_BGXX_CMRX_CONFIG(index, xi.interface),
|
|
cmr_config.u64);
|
|
|
|
cmr_cam.u64 = csr_rd_node(xi.node,
|
|
CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface));
|
|
cmr_cam.s.en = 0;
|
|
csr_wr_node(xi.node,
|
|
CVMX_BGXX_CMR_RX_ADRX_CAM(index * 8, xi.interface),
|
|
cmr_cam.u64);
|
|
oct_eth_info->last_bgx_mac = 0;
|
|
oct_eth_info->bgx_mac_set = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* Halts the specified Ethernet interface preventing it from receiving any more
|
|
* packets.
|
|
*
|
|
* @param dev - Ethernet device to shut down.
|
|
*/
|
|
void octeon_eth_halt(struct udevice *dev)
|
|
{
|
|
struct octeon_eth_info *oct_eth_info = dev_get_priv(dev);
|
|
int index = oct_eth_info->index;
|
|
int interface = oct_eth_info->interface;
|
|
cvmx_helper_interface_mode_t mode;
|
|
union cvmx_gmxx_rxx_adr_ctl adr_ctl;
|
|
cvmx_gmxx_prtx_cfg_t gmx_cfg;
|
|
u64 tmp;
|
|
|
|
debug("%s(%s): Halting\n", __func__, dev->name);
|
|
|
|
oct_eth_info->enabled = 0;
|
|
|
|
mode = cvmx_helper_interface_get_mode(oct_eth_info->interface);
|
|
if (octeon_has_feature(OCTEON_FEATURE_BGX)) {
|
|
octeon_eth_halt_bgx(dev, mode);
|
|
return;
|
|
}
|
|
|
|
/* Stop SCC */
|
|
/* Disable reception on this port at the GMX block */
|
|
switch (mode) {
|
|
case CVMX_HELPER_INTERFACE_MODE_RGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_GMII:
|
|
debug(" RGMII/GMII\n");
|
|
tmp = csr_rd(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface));
|
|
tmp &= ~(1ull << index);
|
|
/* Disable the RGMII RX ports */
|
|
csr_wr(CVMX_ASXX_RX_PRT_EN(oct_eth_info->interface), tmp);
|
|
tmp = csr_rd(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface));
|
|
tmp &= ~(1ull << index);
|
|
/* Disable the RGMII TX ports */
|
|
csr_wr(CVMX_ASXX_TX_PRT_EN(oct_eth_info->interface), tmp);
|
|
/* No break! */
|
|
case CVMX_HELPER_INTERFACE_MODE_SGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_QSGMII:
|
|
case CVMX_HELPER_INTERFACE_MODE_XAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_RXAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XLAUI:
|
|
case CVMX_HELPER_INTERFACE_MODE_XFI:
|
|
case CVMX_HELPER_INTERFACE_MODE_10G_KR:
|
|
case CVMX_HELPER_INTERFACE_MODE_40G_KR4:
|
|
case CVMX_HELPER_INTERFACE_MODE_MIXED:
|
|
case CVMX_HELPER_INTERFACE_MODE_AGL:
|
|
/* Disable MAC filtering */
|
|
gmx_cfg.u64 = csr_rd(oct_eth_info->gmx_base + GMX_PRT_CFG);
|
|
csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG,
|
|
gmx_cfg.u64 & ~1ull);
|
|
adr_ctl.u64 = 0;
|
|
adr_ctl.s.bcst = 1; /* Reject broadcast */
|
|
csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CTL, adr_ctl.u64);
|
|
csr_wr(oct_eth_info->gmx_base + GMX_RX_ADR_CAM_EN, 0);
|
|
csr_wr(oct_eth_info->gmx_base + GMX_PRT_CFG, gmx_cfg.u64);
|
|
break;
|
|
default:
|
|
printf("%s: Unknown mode %d for interface 0x%x:%d\n", __func__,
|
|
mode, interface, index);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void nic_stop(struct udevice *dev)
|
|
{
|
|
octeon_eth_halt(dev);
|
|
}
|
|
|
|
int nic_write_hwaddr(struct udevice *dev)
|
|
{
|
|
cvm_oct_set_mac_address(dev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct eth_ops octeon_nic_ops = {
|
|
.start = nic_open,
|
|
.stop = nic_stop,
|
|
.send = nic_xmit,
|
|
.recv = nic_recv,
|
|
.free_pkt = nic_free_pkt,
|
|
.write_hwaddr = nic_write_hwaddr,
|
|
};
|
|
|
|
static const struct udevice_id octeon_nic_ids[] = {
|
|
{ .compatible = "cavium,octeon-7890-bgx" },
|
|
{}
|
|
};
|
|
|
|
U_BOOT_DRIVER(octeon_nic) = {
|
|
.name = "octeon_nic",
|
|
.id = UCLASS_ETH,
|
|
.probe = octeon_nic_probe,
|
|
.of_match = octeon_nic_ids,
|
|
.ops = &octeon_nic_ops,
|
|
.priv_auto = sizeof(struct octeon_eth_info),
|
|
};
|