u-boot/board/ge/mx53ppd/mx53ppd.c
Pali Rohár bdfb6d70bb version: Move version_string[] from version.h to version_string.h
More C files do not use compile time timestamp macros and do not have to be
recompiled every time when SOURCE_DATE_EPOCH changes.

This patch moves version_string[] from version.h to version_string.h and
updates other C files which only needs version_string[] string to include
version_string.h instead of version.h. After applying this patch these
files are not recompiled every time when SOURCE_DATE_EPOCH changes.

Signed-off-by: Pali Rohár <pali@kernel.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
2021-09-17 12:10:44 -04:00

267 lines
5.4 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2017 General Electric Company
*
* Based on board/freescale/mx53loco/mx53loco.c:
*
* Copyright (C) 2011 Freescale Semiconductor, Inc.
* Jason Liu <r64343@freescale.com>
*/
#include <common.h>
#include <init.h>
#include <asm/global_data.h>
#include <asm/io.h>
#include <asm/arch/imx-regs.h>
#include <asm/arch/sys_proto.h>
#include <asm/arch/crm_regs.h>
#include <asm/arch/clock.h>
#include <asm/arch/iomux-mx53.h>
#include <asm/arch/clock.h>
#include <env.h>
#include <linux/errno.h>
#include <linux/libfdt.h>
#include <asm/mach-imx/mxc_i2c.h>
#include <asm/mach-imx/mx5_video.h>
#include <netdev.h>
#include <i2c.h>
#include <mmc.h>
#include <fsl_esdhc_imx.h>
#include <asm/gpio.h>
#include <power/pmic.h>
#include <dialog_pmic.h>
#include <fsl_pmic.h>
#include <linux/fb.h>
#include <ipu_pixfmt.h>
#include <version_string.h>
#include <watchdog.h>
#include "ppd_gpio.h"
#include <stdlib.h>
#include "../../ge/common/ge_rtc.h"
#include "../../ge/common/vpd_reader.h"
DECLARE_GLOBAL_DATA_PTR;
static u32 mx53_dram_size[2];
phys_size_t get_effective_memsize(void)
{
/*
* WARNING: We must override get_effective_memsize() function here
* to report only the size of the first DRAM bank. This is to make
* U-Boot relocator place U-Boot into valid memory, that is, at the
* end of the first DRAM bank. If we did not override this function
* like so, U-Boot would be placed at the address of the first DRAM
* bank + total DRAM size - sizeof(uboot), which in the setup where
* each DRAM bank contains 512MiB of DRAM would result in placing
* U-Boot into invalid memory area close to the end of the first
* DRAM bank.
*/
return mx53_dram_size[0];
}
int dram_init(void)
{
mx53_dram_size[0] = get_ram_size((void *)PHYS_SDRAM_1, 1 << 30);
mx53_dram_size[1] = get_ram_size((void *)PHYS_SDRAM_2, 1 << 30);
gd->ram_size = mx53_dram_size[0] + mx53_dram_size[1];
return 0;
}
int dram_init_banksize(void)
{
gd->bd->bi_dram[0].start = PHYS_SDRAM_1;
gd->bd->bi_dram[0].size = mx53_dram_size[0];
gd->bd->bi_dram[1].start = PHYS_SDRAM_2;
gd->bd->bi_dram[1].size = mx53_dram_size[1];
return 0;
}
#ifdef CONFIG_REVISION_TAG
u32 get_board_rev(void)
{
return get_cpu_rev() & ~(0xF << 8);
}
#endif
#ifdef CONFIG_USB_EHCI_MX5
int board_ehci_hcd_init(int port)
{
/* request VBUS power enable pin, GPIO7_8 */
imx_iomux_v3_setup_pad(MX53_PAD_PATA_DA_2__GPIO7_8);
gpio_direction_output(IMX_GPIO_NR(7, 8), 1);
return 0;
}
#endif
static int clock_1GHz(void)
{
int ret;
u32 ref_clk = MXC_HCLK;
/*
* After increasing voltage to 1.25V, we can switch
* CPU clock to 1GHz and DDR to 400MHz safely
*/
ret = mxc_set_clock(ref_clk, 1000, MXC_ARM_CLK);
if (ret) {
printf("CPU: Switch CPU clock to 1GHZ failed\n");
return -1;
}
ret = mxc_set_clock(ref_clk, 400, MXC_PERIPH_CLK);
ret |= mxc_set_clock(ref_clk, 400, MXC_DDR_CLK);
if (ret) {
printf("CPU: Switch DDR clock to 400MHz failed\n");
return -1;
}
return 0;
}
void ppd_gpio_init(void)
{
int i;
imx_iomux_v3_setup_multiple_pads(ppd_pads, ARRAY_SIZE(ppd_pads));
for (i = 0; i < ARRAY_SIZE(ppd_gpios); ++i) {
gpio_request(ppd_gpios[i].gpio, "request");
gpio_direction_output(ppd_gpios[i].gpio, ppd_gpios[i].value);
}
}
int board_early_init_f(void)
{
ppd_gpio_init();
return 0;
}
/*
* Do not overwrite the console
* Use always serial for U-Boot console
*/
int overwrite_console(void)
{
return 1;
}
#define VPD_TYPE_INVALID 0x00
#define VPD_BLOCK_NETWORK 0x20
#define VPD_BLOCK_HWID 0x44
#define VPD_PRODUCT_PPD 4
#define VPD_HAS_MAC1 0x1
#define VPD_MAC_ADDRESS_LENGTH 6
struct vpd_cache {
u8 product_id;
u8 has;
unsigned char mac1[VPD_MAC_ADDRESS_LENGTH];
};
/*
* Extracts MAC and product information from the VPD.
*/
static int vpd_callback(struct vpd_cache *userdata, u8 id, u8 version,
u8 type, size_t size, u8 const *data)
{
struct vpd_cache *vpd = userdata;
if (id == VPD_BLOCK_HWID && version == 1 && type != VPD_TYPE_INVALID &&
size >= 1) {
vpd->product_id = data[0];
} else if (id == VPD_BLOCK_NETWORK && version == 1 &&
type != VPD_TYPE_INVALID) {
if (size >= 6) {
vpd->has |= VPD_HAS_MAC1;
memcpy(vpd->mac1, data, VPD_MAC_ADDRESS_LENGTH);
}
}
return 0;
}
static void process_vpd(struct vpd_cache *vpd)
{
int fec_index = -1;
if (vpd->product_id == VPD_PRODUCT_PPD)
fec_index = 0;
if (fec_index >= 0 && (vpd->has & VPD_HAS_MAC1))
eth_env_set_enetaddr("ethaddr", vpd->mac1);
}
int board_init(void)
{
gd->bd->bi_boot_params = PHYS_SDRAM_1 + 0x100;
mxc_set_sata_internal_clock();
return 0;
}
int misc_init_r(void)
{
const char *cause;
/* We care about WDOG only, treating everything else as
* a power-on-reset.
*/
if (get_imx_reset_cause() & 0x0010)
cause = "WDOG";
else
cause = "POR";
env_set("bootcause", cause);
return 0;
}
int board_late_init(void)
{
int res;
struct vpd_cache vpd;
memset(&vpd, 0, sizeof(vpd));
res = read_i2c_vpd(&vpd, vpd_callback);
if (!res)
process_vpd(&vpd);
else
printf("Can't read VPD");
res = clock_1GHz();
if (res != 0)
return res;
print_cpuinfo();
check_time();
return 0;
}
int checkboard(void)
{
puts("Board: GE PPD\n");
return 0;
}
#ifdef CONFIG_OF_BOARD_SETUP
int ft_board_setup(void *blob, struct bd_info *bd)
{
char *rtc_status = env_get("rtc_status");
fdt_setprop(blob, 0, "ge,boot-ver", version_string,
strlen(version_string) + 1);
fdt_setprop(blob, 0, "ge,rtc-status", rtc_status,
strlen(rtc_status) + 1);
return 0;
}
#endif