u-boot/cpu/arm1136/mx31/timer.c
Ingo van Lil 3eb90bad65 Generic udelay() with watchdog support
According to the PPC reference implementation the udelay() function is
responsible for resetting the watchdog timer as frequently as needed.
Most other architectures do not meet that requirement, so long-running
operations might result in a watchdog reset.

This patch adds a generic udelay() function which takes care of
resetting the watchdog before calling an architecture-specific
__udelay().

Signed-off-by: Ingo van Lil <inguin@gmx.de>
2009-12-05 01:08:53 +01:00

170 lines
4.3 KiB
C

/*
* (C) Copyright 2007
* Sascha Hauer, Pengutronix
*
* See file CREDITS for list of people who contributed to this
* project.
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation; either version 2 of
* the License, or (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
* MA 02111-1307 USA
*/
#include <common.h>
#include <asm/arch/mx31-regs.h>
#include <div64.h>
#define TIMER_BASE 0x53f90000 /* General purpose timer 1 */
/* General purpose timers registers */
#define GPTCR __REG(TIMER_BASE) /* Control register */
#define GPTPR __REG(TIMER_BASE + 0x4) /* Prescaler register */
#define GPTSR __REG(TIMER_BASE + 0x8) /* Status register */
#define GPTCNT __REG(TIMER_BASE + 0x24) /* Counter register */
/* General purpose timers bitfields */
#define GPTCR_SWR (1 << 15) /* Software reset */
#define GPTCR_FRR (1 << 9) /* Freerun / restart */
#define GPTCR_CLKSOURCE_32 (4 << 6) /* Clock source */
#define GPTCR_TEN 1 /* Timer enable */
static ulong timestamp;
static ulong lastinc;
/* "time" is measured in 1 / CONFIG_SYS_HZ seconds, "tick" is internal timer period */
#ifdef CONFIG_MX31_TIMER_HIGH_PRECISION
/* ~0.4% error - measured with stop-watch on 100s boot-delay */
static inline unsigned long long tick_to_time(unsigned long long tick)
{
tick *= CONFIG_SYS_HZ;
do_div(tick, CONFIG_MX31_CLK32);
return tick;
}
static inline unsigned long long time_to_tick(unsigned long long time)
{
time *= CONFIG_MX31_CLK32;
do_div(time, CONFIG_SYS_HZ);
return time;
}
static inline unsigned long long us_to_tick(unsigned long long us)
{
us = us * CONFIG_MX31_CLK32 + 999999;
do_div(us, 1000000);
return us;
}
#else
/* ~2% error */
#define TICK_PER_TIME ((CONFIG_MX31_CLK32 + CONFIG_SYS_HZ / 2) / CONFIG_SYS_HZ)
#define US_PER_TICK (1000000 / CONFIG_MX31_CLK32)
static inline unsigned long long tick_to_time(unsigned long long tick)
{
do_div(tick, TICK_PER_TIME);
return tick;
}
static inline unsigned long long time_to_tick(unsigned long long time)
{
return time * TICK_PER_TIME;
}
static inline unsigned long long us_to_tick(unsigned long long us)
{
us += US_PER_TICK - 1;
do_div(us, US_PER_TICK);
return us;
}
#endif
/* The 32768Hz 32-bit timer overruns in 131072 seconds */
int timer_init (void)
{
int i;
/* setup GP Timer 1 */
GPTCR = GPTCR_SWR;
for (i = 0; i < 100; i++)
GPTCR = 0; /* We have no udelay by now */
GPTPR = 0; /* 32Khz */
/* Freerun Mode, PERCLK1 input */
GPTCR |= GPTCR_CLKSOURCE_32 | GPTCR_TEN;
return 0;
}
void reset_timer_masked (void)
{
/* reset time */
lastinc = GPTCNT; /* capture current incrementer value time */
timestamp = 0; /* start "advancing" time stamp from 0 */
}
void reset_timer(void)
{
reset_timer_masked();
}
unsigned long long get_ticks (void)
{
ulong now = GPTCNT; /* current tick value */
if (now >= lastinc) /* normal mode (non roll) */
/* move stamp forward with absolut diff ticks */
timestamp += (now - lastinc);
else /* we have rollover of incrementer */
timestamp += (0xFFFFFFFF - lastinc) + now;
lastinc = now;
return timestamp;
}
ulong get_timer_masked (void)
{
/*
* get_ticks() returns a long long (64 bit), it wraps in
* 2^64 / CONFIG_MX31_CLK32 = 2^64 / 2^15 = 2^49 ~ 5 * 10^14 (s) ~
* 5 * 10^9 days... and get_ticks() * CONFIG_SYS_HZ wraps in
* 5 * 10^6 days - long enough.
*/
return tick_to_time(get_ticks());
}
ulong get_timer (ulong base)
{
return get_timer_masked () - base;
}
void set_timer (ulong t)
{
timestamp = time_to_tick(t);
}
/* delay x useconds AND perserve advance timstamp value */
void __udelay (unsigned long usec)
{
unsigned long long tmp;
ulong tmo;
tmo = us_to_tick(usec);
tmp = get_ticks() + tmo; /* get current timestamp */
while (get_ticks() < tmp) /* loop till event */
/*NOP*/;
}
void reset_cpu (ulong addr)
{
__REG16(WDOG_BASE) = 4;
}