mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-10 23:24:38 +00:00
8b9cba0295
SPL on Engicam i.Core M6 boards enabled DM, so it would require some malloc() pool before relocation in order to load U-Boot proper properly. So, enable SPL malloc() pool of 0x2000 size similarly like what we have used for icore mmc defconfigs. Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Shyam Saini <shyam.saini@amarulasolutions.com> Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
54 lines
1.3 KiB
Text
54 lines
1.3 KiB
Text
CONFIG_ARM=y
|
|
CONFIG_ARCH_MX6=y
|
|
CONFIG_SYS_TEXT_BASE=0x17800000
|
|
CONFIG_SPL_GPIO_SUPPORT=y
|
|
CONFIG_SPL_LIBCOMMON_SUPPORT=y
|
|
CONFIG_SPL_LIBGENERIC_SUPPORT=y
|
|
CONFIG_SYS_MALLOC_F_LEN=0x2000
|
|
CONFIG_TARGET_MX6Q_ENGICAM=y
|
|
CONFIG_SPL_SERIAL_SUPPORT=y
|
|
CONFIG_SPL=y
|
|
# CONFIG_CMD_BMODE is not set
|
|
CONFIG_NR_DRAM_BANKS=1
|
|
CONFIG_FIT=y
|
|
CONFIG_FIT_SIGNATURE=y
|
|
CONFIG_FIT_VERBOSE=y
|
|
CONFIG_IMAGE_FORMAT_LEGACY=y
|
|
CONFIG_SYS_EXTRA_OPTIONS="IMX_CONFIG=arch/arm/mach-imx/spl_sd.cfg"
|
|
CONFIG_BOOTDELAY=3
|
|
CONFIG_BOUNCE_BUFFER=y
|
|
CONFIG_SPL_DMA_SUPPORT=y
|
|
CONFIG_SPL_WATCHDOG_SUPPORT=y
|
|
CONFIG_HUSH_PARSER=y
|
|
CONFIG_SYS_PROMPT="icorem6qdl> "
|
|
CONFIG_CMD_MEMTEST=y
|
|
CONFIG_CMD_GPIO=y
|
|
CONFIG_CMD_I2C=y
|
|
CONFIG_CMD_MMC=y
|
|
CONFIG_CMD_MII=y
|
|
CONFIG_CMD_PING=y
|
|
CONFIG_CMD_CACHE=y
|
|
CONFIG_CMD_EXT4=y
|
|
CONFIG_CMD_EXT4_WRITE=y
|
|
CONFIG_CMD_FAT=y
|
|
CONFIG_CMD_FS_GENERIC=y
|
|
CONFIG_CMD_MTDPARTS=y
|
|
CONFIG_MTDIDS_DEFAULT="nand0=gpmi-nand"
|
|
CONFIG_MTDPARTS_DEFAULT="mtdparts=gpmi-nand:2m(spl),2m(uboot),1m(env),8m(kernel),1m(dtb),-(rootfs)"
|
|
CONFIG_CMD_UBI=y
|
|
CONFIG_DEFAULT_DEVICE_TREE="imx6dl-icore"
|
|
CONFIG_ENV_IS_IN_NAND=y
|
|
CONFIG_SYS_I2C_MXC=y
|
|
CONFIG_FSL_ESDHC=y
|
|
CONFIG_NAND=y
|
|
CONFIG_NAND_MXS=y
|
|
CONFIG_PHYLIB=y
|
|
CONFIG_PHY_SMSC=y
|
|
CONFIG_FEC_MXC=y
|
|
CONFIG_MII=y
|
|
CONFIG_PINCTRL=y
|
|
CONFIG_PINCTRL_IMX6=y
|
|
CONFIG_MXC_UART=y
|
|
CONFIG_IMX_THERMAL=y
|
|
CONFIG_VIDEO=y
|
|
CONFIG_VIDEO_IPUV3=y
|