Stefano Babic d81b27a245 MX35: add support for woodburn board ... The woodburn board is based on the MX35 SOC. Support for both external (NOR) and internal (SD Card) boot mode are added. It uses the generic SPL framework to implement the internal boot mode. The following peripherals are supported: - Ethernet (FEC) - SD Card - NAND (512 MB) - NOR Flash In the internal boot mode, a simple imximage header is generated to set the address in internal RAM where the SOC must copy the SPL code. The initial setup is then demanded to the SPL itself. Signed-off-by: Stefano Babic <sbabic@denx.de>		2012-10-26 16:27:59 +02:00
..
asm-offsets.c	mx35: Define MAX and AIPS registers	2012-10-15 11:54:14 -07:00
generic.c	MX35: Add soc_boot_mode and soc_boot_device to MX35	2012-10-26 16:27:58 +02:00
iomux.c	mx35 iomux: Remove unused macro	2012-09-01 14:58:27 +02:00
Makefile	MX35: add support for woodburn board	2012-10-26 16:27:59 +02:00
mx35_sdram.c	MX35: add support for woodburn board	2012-10-26 16:27:59 +02:00
timer.c	mx35 timer: Switch to 32-kHz source	2012-09-06 11:05:24 +02:00