u-boot/board/keymile/kmp204x/qrio.c
Valentin Longchamp 87ea2c0ff3 kmp204x: introduce QRIO GPIO functions
The QRIO GPIO functions can be of general interest. They are thus added
to a qrio.c and their prototype are available from kmp204x.h. The QRIO
prst function are also included in this file, as well as the functions
required for the I2C deblocking support (open-drain).

Signed-off-by: Valentin Longchamp <valentin.longchamp@keymile.com>
[York Sun: Remove extra blank line in board/keymile/kmp204x/qrio.c]
Signed-off-by: York Sun <yorksun@freescale.com>
2014-02-03 08:38:49 -08:00

146 lines
2.7 KiB
C

/*
* (C) Copyright 2013 Keymile AG
* Valentin Longchamp <valentin.longchamp@keymile.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include "../common/common.h"
#include "kmp204x.h"
/* QRIO GPIO register offsets */
#define DIRECT_OFF 0x18
#define GPRT_OFF 0x1c
int qrio_get_gpio(u8 port_off, u8 gpio_nr)
{
u32 gprt;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
gprt = in_be32(qrio_base + port_off + GPRT_OFF);
return (gprt >> gpio_nr) & 1U;
}
void qrio_set_gpio(u8 port_off, u8 gpio_nr, bool value)
{
u32 gprt, mask;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
mask = 1U << gpio_nr;
gprt = in_be32(qrio_base + port_off + GPRT_OFF);
if (value)
gprt |= mask;
else
gprt &= ~mask;
out_be32(qrio_base + port_off + GPRT_OFF, gprt);
}
void qrio_gpio_direction_output(u8 port_off, u8 gpio_nr, bool value)
{
u32 direct, mask;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
mask = 1U << gpio_nr;
direct = in_be32(qrio_base + port_off + DIRECT_OFF);
direct |= mask;
out_be32(qrio_base + port_off + DIRECT_OFF, direct);
qrio_set_gpio(port_off, gpio_nr, value);
}
void qrio_gpio_direction_input(u8 port_off, u8 gpio_nr)
{
u32 direct, mask;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
mask = 1U << gpio_nr;
direct = in_be32(qrio_base + port_off + DIRECT_OFF);
direct &= ~mask;
out_be32(qrio_base + port_off + DIRECT_OFF, direct);
}
void qrio_set_opendrain_gpio(u8 port_off, u8 gpio_nr, u8 val)
{
u32 direct, mask;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
mask = 1U << gpio_nr;
direct = in_be32(qrio_base + port_off + DIRECT_OFF);
if (val == 0)
/* set to output -> GPIO drives low */
direct |= mask;
else
/* set to input -> GPIO floating */
direct &= ~mask;
out_be32(qrio_base + port_off + DIRECT_OFF, direct);
}
#define WDMASK_OFF 0x16
static void qrio_wdmask(u8 bit, bool wden)
{
u16 wdmask;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
wdmask = in_be16(qrio_base + WDMASK_OFF);
if (wden)
wdmask |= (1 << bit);
else
wdmask &= ~(1 << bit);
out_be16(qrio_base + WDMASK_OFF, wdmask);
}
#define PRST_OFF 0x1a
void qrio_prst(u8 bit, bool en, bool wden)
{
u16 prst;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
qrio_wdmask(bit, wden);
prst = in_be16(qrio_base + PRST_OFF);
if (en)
prst &= ~(1 << bit);
else
prst |= (1 << bit);
out_be16(qrio_base + PRST_OFF, prst);
}
#define PRSTCFG_OFF 0x1c
void qrio_prstcfg(u8 bit, u8 mode)
{
u32 prstcfg;
u8 i;
void __iomem *qrio_base = (void *)CONFIG_SYS_QRIO_BASE;
prstcfg = in_be32(qrio_base + PRSTCFG_OFF);
for (i = 0; i < 2; i++) {
if (mode & (1<<i))
set_bit(2*bit+i, &prstcfg);
else
clear_bit(2*bit+i, &prstcfg);
}
out_be32(qrio_base + PRSTCFG_OFF, prstcfg);
}