u-boot/drivers/net/fm/memac_phy.c
Tom Rini 83d290c56f SPDX: Convert all of our single license tags to Linux Kernel style
When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini <trini@konsulko.com>
2018-05-07 09:34:12 -04:00

169 lines
4.5 KiB
C

// SPDX-License-Identifier: GPL-2.0+
/*
* Copyright 2012 Freescale Semiconductor, Inc.
* Andy Fleming <afleming@gmail.com>
* Roy Zang <tie-fei.zang@freescale.com>
* Some part is taken from tsec.c
*/
#include <common.h>
#include <miiphy.h>
#include <phy.h>
#include <asm/io.h>
#include <fsl_memac.h>
#include <fm_eth.h>
#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN
#define memac_out_32(a, v) out_le32(a, v)
#define memac_clrbits_32(a, v) clrbits_le32(a, v)
#define memac_setbits_32(a, v) setbits_le32(a, v)
#else
#define memac_out_32(a, v) out_be32(a, v)
#define memac_clrbits_32(a, v) clrbits_be32(a, v)
#define memac_setbits_32(a, v) setbits_be32(a, v)
#endif
static u32 memac_in_32(u32 *reg)
{
#ifdef CONFIG_SYS_MEMAC_LITTLE_ENDIAN
return in_le32(reg);
#else
return in_be32(reg);
#endif
}
/*
* Write value to the PHY for this device to the register at regnum, waiting
* until the write is done before it returns. All PHY configuration has to be
* done through the TSEC1 MIIM regs
*/
int memac_mdio_write(struct mii_dev *bus, int port_addr, int dev_addr,
int regnum, u16 value)
{
u32 mdio_ctl;
struct memac_mdio_controller *regs = bus->priv;
u32 c45 = 1; /* Default to 10G interface */
if (dev_addr == MDIO_DEVAD_NONE) {
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
memac_clrbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
} else
memac_setbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
/* Wait till the bus is free */
while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Set the port and dev addr */
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
memac_out_32(&regs->mdio_ctl, mdio_ctl);
/* Set the register address */
if (c45)
memac_out_32(&regs->mdio_addr, regnum & 0xffff);
/* Wait till the bus is free */
while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Write the value to the register */
memac_out_32(&regs->mdio_data, MDIO_DATA(value));
/* Wait till the MDIO write is complete */
while ((memac_in_32(&regs->mdio_data)) & MDIO_DATA_BSY)
;
return 0;
}
/*
* Reads from register regnum in the PHY for device dev, returning the value.
* Clears miimcom first. All PHY configuration has to be done through the
* TSEC1 MIIM regs
*/
int memac_mdio_read(struct mii_dev *bus, int port_addr, int dev_addr,
int regnum)
{
u32 mdio_ctl;
struct memac_mdio_controller *regs = bus->priv;
u32 c45 = 1;
if (dev_addr == MDIO_DEVAD_NONE) {
if (!strcmp(bus->name, DEFAULT_FM_TGEC_MDIO_NAME))
return 0xffff;
c45 = 0; /* clause 22 */
dev_addr = regnum & 0x1f;
memac_clrbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
} else
memac_setbits_32(&regs->mdio_stat, MDIO_STAT_ENC);
/* Wait till the bus is free */
while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Set the Port and Device Addrs */
mdio_ctl = MDIO_CTL_PORT_ADDR(port_addr) | MDIO_CTL_DEV_ADDR(dev_addr);
memac_out_32(&regs->mdio_ctl, mdio_ctl);
/* Set the register address */
if (c45)
memac_out_32(&regs->mdio_addr, regnum & 0xffff);
/* Wait till the bus is free */
while ((memac_in_32(&regs->mdio_stat)) & MDIO_STAT_BSY)
;
/* Initiate the read */
mdio_ctl |= MDIO_CTL_READ;
memac_out_32(&regs->mdio_ctl, mdio_ctl);
/* Wait till the MDIO write is complete */
while ((memac_in_32(&regs->mdio_data)) & MDIO_DATA_BSY)
;
/* Return all Fs if nothing was there */
if (memac_in_32(&regs->mdio_stat) & MDIO_STAT_RD_ER)
return 0xffff;
return memac_in_32(&regs->mdio_data) & 0xffff;
}
int memac_mdio_reset(struct mii_dev *bus)
{
return 0;
}
int fm_memac_mdio_init(bd_t *bis, struct memac_mdio_info *info)
{
struct mii_dev *bus = mdio_alloc();
if (!bus) {
printf("Failed to allocate FM TGEC MDIO bus\n");
return -1;
}
bus->read = memac_mdio_read;
bus->write = memac_mdio_write;
bus->reset = memac_mdio_reset;
strcpy(bus->name, info->name);
bus->priv = info->regs;
/*
* On some platforms like B4860, default value of MDIO_CLK_DIV bits
* in mdio_stat(mdio_cfg) register generates MDIO clock too high
* (much higher than 2.5MHz), violating the IEEE specs.
* On other platforms like T1040, default value of MDIO_CLK_DIV bits
* is zero, so MDIO clock is disabled.
* So, for proper functioning of MDIO, MDIO_CLK_DIV bits needs to
* be properly initialized.
* NEG bit default should be '1' as per FMAN-v3 RM, but on platform
* like T2080QDS, this bit default is '0', which leads to MDIO failure
* on XAUI PHY, so set this bit definitely.
*/
memac_setbits_32(
&((struct memac_mdio_controller *)info->regs)->mdio_stat,
MDIO_STAT_CLKDIV(258) | MDIO_STAT_NEG);
return mdio_register(bus);
}