mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
0421c9809a
The SARADC driver was merged after the following commit :
commit d35812368a
("regmap: change regmap_init_mem() to take ofnode instead udevice")
Thus breaking build, this patch fixes the regmap_init_mem accordingly.
Signed-off-by: Neil Armstrong <narmstrong@baylibre.com>
723 lines
22 KiB
C
723 lines
22 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
|
|
* Copyright (C) 2018 BayLibre, SAS
|
|
* Author: Neil Armstrong <narmstrong@baylibre.com>
|
|
*
|
|
* Amlogic Meson Successive Approximation Register (SAR) A/D Converter
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <adc.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <regmap.h>
|
|
#include <errno.h>
|
|
#include <asm/io.h>
|
|
#include <linux/math64.h>
|
|
#include <linux/bitfield.h>
|
|
|
|
#define MESON_SAR_ADC_REG0 0x00
|
|
#define MESON_SAR_ADC_REG0_PANEL_DETECT BIT(31)
|
|
#define MESON_SAR_ADC_REG0_BUSY_MASK GENMASK(30, 28)
|
|
#define MESON_SAR_ADC_REG0_DELTA_BUSY BIT(30)
|
|
#define MESON_SAR_ADC_REG0_AVG_BUSY BIT(29)
|
|
#define MESON_SAR_ADC_REG0_SAMPLE_BUSY BIT(28)
|
|
#define MESON_SAR_ADC_REG0_FIFO_FULL BIT(27)
|
|
#define MESON_SAR_ADC_REG0_FIFO_EMPTY BIT(26)
|
|
#define MESON_SAR_ADC_REG0_FIFO_COUNT_MASK GENMASK(25, 21)
|
|
#define MESON_SAR_ADC_REG0_ADC_BIAS_CTRL_MASK GENMASK(20, 19)
|
|
#define MESON_SAR_ADC_REG0_CURR_CHAN_ID_MASK GENMASK(18, 16)
|
|
#define MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL BIT(15)
|
|
#define MESON_SAR_ADC_REG0_SAMPLING_STOP BIT(14)
|
|
#define MESON_SAR_ADC_REG0_CHAN_DELTA_EN_MASK GENMASK(13, 12)
|
|
#define MESON_SAR_ADC_REG0_DETECT_IRQ_POL BIT(10)
|
|
#define MESON_SAR_ADC_REG0_DETECT_IRQ_EN BIT(9)
|
|
#define MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK GENMASK(8, 4)
|
|
#define MESON_SAR_ADC_REG0_FIFO_IRQ_EN BIT(3)
|
|
#define MESON_SAR_ADC_REG0_SAMPLING_START BIT(2)
|
|
#define MESON_SAR_ADC_REG0_CONTINUOUS_EN BIT(1)
|
|
#define MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE BIT(0)
|
|
|
|
#define MESON_SAR_ADC_CHAN_LIST 0x04
|
|
#define MESON_SAR_ADC_CHAN_LIST_MAX_INDEX_MASK GENMASK(26, 24)
|
|
#define MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(_chan) \
|
|
(GENMASK(2, 0) << ((_chan) * 3))
|
|
|
|
#define MESON_SAR_ADC_AVG_CNTL 0x08
|
|
#define MESON_SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(_chan) \
|
|
(16 + ((_chan) * 2))
|
|
#define MESON_SAR_ADC_AVG_CNTL_AVG_MODE_MASK(_chan) \
|
|
(GENMASK(17, 16) << ((_chan) * 2))
|
|
#define MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(_chan) \
|
|
(0 + ((_chan) * 2))
|
|
#define MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(_chan) \
|
|
(GENMASK(1, 0) << ((_chan) * 2))
|
|
|
|
#define MESON_SAR_ADC_REG3 0x0c
|
|
#define MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY BIT(31)
|
|
#define MESON_SAR_ADC_REG3_CLK_EN BIT(30)
|
|
#define MESON_SAR_ADC_REG3_BL30_INITIALIZED BIT(28)
|
|
#define MESON_SAR_ADC_REG3_CTRL_CONT_RING_COUNTER_EN BIT(27)
|
|
#define MESON_SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE BIT(26)
|
|
#define MESON_SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK GENMASK(25, 23)
|
|
#define MESON_SAR_ADC_REG3_DETECT_EN BIT(22)
|
|
#define MESON_SAR_ADC_REG3_ADC_EN BIT(21)
|
|
#define MESON_SAR_ADC_REG3_PANEL_DETECT_COUNT_MASK GENMASK(20, 18)
|
|
#define MESON_SAR_ADC_REG3_PANEL_DETECT_FILTER_TB_MASK GENMASK(17, 16)
|
|
#define MESON_SAR_ADC_REG3_ADC_CLK_DIV_SHIFT 10
|
|
#define MESON_SAR_ADC_REG3_ADC_CLK_DIV_WIDTH 5
|
|
#define MESON_SAR_ADC_REG3_BLOCK_DLY_SEL_MASK GENMASK(9, 8)
|
|
#define MESON_SAR_ADC_REG3_BLOCK_DLY_MASK GENMASK(7, 0)
|
|
|
|
#define MESON_SAR_ADC_DELAY 0x10
|
|
#define MESON_SAR_ADC_DELAY_INPUT_DLY_SEL_MASK GENMASK(25, 24)
|
|
#define MESON_SAR_ADC_DELAY_BL30_BUSY BIT(15)
|
|
#define MESON_SAR_ADC_DELAY_KERNEL_BUSY BIT(14)
|
|
#define MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK GENMASK(23, 16)
|
|
#define MESON_SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK GENMASK(9, 8)
|
|
#define MESON_SAR_ADC_DELAY_SAMPLE_DLY_CNT_MASK GENMASK(7, 0)
|
|
|
|
#define MESON_SAR_ADC_LAST_RD 0x14
|
|
#define MESON_SAR_ADC_LAST_RD_LAST_CHANNEL1_MASK GENMASK(23, 16)
|
|
#define MESON_SAR_ADC_LAST_RD_LAST_CHANNEL0_MASK GENMASK(9, 0)
|
|
|
|
#define MESON_SAR_ADC_FIFO_RD 0x18
|
|
#define MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK GENMASK(14, 12)
|
|
#define MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK GENMASK(11, 0)
|
|
|
|
#define MESON_SAR_ADC_AUX_SW 0x1c
|
|
#define MESON_SAR_ADC_AUX_SW_MUX_SEL_CHAN_SHIFT(_chan) \
|
|
(8 + (((_chan) - 2) * 3))
|
|
#define MESON_SAR_ADC_AUX_SW_VREF_P_MUX BIT(6)
|
|
#define MESON_SAR_ADC_AUX_SW_VREF_N_MUX BIT(5)
|
|
#define MESON_SAR_ADC_AUX_SW_MODE_SEL BIT(4)
|
|
#define MESON_SAR_ADC_AUX_SW_YP_DRIVE_SW BIT(3)
|
|
#define MESON_SAR_ADC_AUX_SW_XP_DRIVE_SW BIT(2)
|
|
#define MESON_SAR_ADC_AUX_SW_YM_DRIVE_SW BIT(1)
|
|
#define MESON_SAR_ADC_AUX_SW_XM_DRIVE_SW BIT(0)
|
|
|
|
#define MESON_SAR_ADC_CHAN_10_SW 0x20
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK GENMASK(25, 23)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_VREF_P_MUX BIT(22)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_VREF_N_MUX BIT(21)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_MODE_SEL BIT(20)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_YP_DRIVE_SW BIT(19)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_XP_DRIVE_SW BIT(18)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_YM_DRIVE_SW BIT(17)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN1_XM_DRIVE_SW BIT(16)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_MUX_SEL_MASK GENMASK(9, 7)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_VREF_P_MUX BIT(6)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_VREF_N_MUX BIT(5)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_MODE_SEL BIT(4)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_YP_DRIVE_SW BIT(3)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_XP_DRIVE_SW BIT(2)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_YM_DRIVE_SW BIT(1)
|
|
#define MESON_SAR_ADC_CHAN_10_SW_CHAN0_XM_DRIVE_SW BIT(0)
|
|
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW 0x24
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_SW_EN BIT(26)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK GENMASK(25, 23)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_VREF_P_MUX BIT(22)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_VREF_N_MUX BIT(21)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MODE_SEL BIT(20)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_YP_DRIVE_SW BIT(19)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_XP_DRIVE_SW BIT(18)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_YM_DRIVE_SW BIT(17)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_XM_DRIVE_SW BIT(16)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK GENMASK(9, 7)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_VREF_P_MUX BIT(6)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_VREF_N_MUX BIT(5)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MODE_SEL BIT(4)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_YP_DRIVE_SW BIT(3)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_XP_DRIVE_SW BIT(2)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_YM_DRIVE_SW BIT(1)
|
|
#define MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_XM_DRIVE_SW BIT(0)
|
|
|
|
#define MESON_SAR_ADC_DELTA_10 0x28
|
|
#define MESON_SAR_ADC_DELTA_10_TEMP_SEL BIT(27)
|
|
#define MESON_SAR_ADC_DELTA_10_TS_REVE1 BIT(26)
|
|
#define MESON_SAR_ADC_DELTA_10_CHAN1_DELTA_VALUE_MASK GENMASK(25, 16)
|
|
#define MESON_SAR_ADC_DELTA_10_TS_REVE0 BIT(15)
|
|
#define MESON_SAR_ADC_DELTA_10_TS_C_SHIFT 11
|
|
#define MESON_SAR_ADC_DELTA_10_TS_C_MASK GENMASK(14, 11)
|
|
#define MESON_SAR_ADC_DELTA_10_TS_VBG_EN BIT(10)
|
|
#define MESON_SAR_ADC_DELTA_10_CHAN0_DELTA_VALUE_MASK GENMASK(9, 0)
|
|
|
|
/*
|
|
* NOTE: registers from here are undocumented (the vendor Linux kernel driver
|
|
* and u-boot source served as reference). These only seem to be relevant on
|
|
* GXBB and newer.
|
|
*/
|
|
#define MESON_SAR_ADC_REG11 0x2c
|
|
#define MESON_SAR_ADC_REG11_BANDGAP_EN BIT(13)
|
|
|
|
#define MESON_SAR_ADC_REG13 0x34
|
|
#define MESON_SAR_ADC_REG13_12BIT_CALIBRATION_MASK GENMASK(13, 8)
|
|
|
|
#define MESON_SAR_ADC_MAX_FIFO_SIZE 32
|
|
#define MESON_SAR_ADC_TIMEOUT 100 /* ms */
|
|
|
|
#define NUM_CHANNELS 8
|
|
|
|
#define MILLION 1000000
|
|
|
|
struct meson_saradc_data {
|
|
int num_bits;
|
|
};
|
|
|
|
struct meson_saradc_priv {
|
|
const struct meson_saradc_data *data;
|
|
struct regmap *regmap;
|
|
struct clk core_clk;
|
|
struct clk adc_clk;
|
|
bool initialized;
|
|
int active_channel;
|
|
int calibbias;
|
|
int calibscale;
|
|
};
|
|
|
|
static unsigned int
|
|
meson_saradc_get_fifo_count(struct meson_saradc_priv *priv)
|
|
{
|
|
u32 regval;
|
|
|
|
regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
|
|
|
|
return FIELD_GET(MESON_SAR_ADC_REG0_FIFO_COUNT_MASK, regval);
|
|
}
|
|
|
|
static int meson_saradc_lock(struct meson_saradc_priv *priv)
|
|
{
|
|
uint val, timeout = 10000;
|
|
|
|
/* prevent BL30 from using the SAR ADC while we are using it */
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
|
|
MESON_SAR_ADC_DELAY_KERNEL_BUSY,
|
|
MESON_SAR_ADC_DELAY_KERNEL_BUSY);
|
|
|
|
/*
|
|
* wait until BL30 releases it's lock (so we can use the SAR ADC)
|
|
*/
|
|
do {
|
|
udelay(1);
|
|
regmap_read(priv->regmap, MESON_SAR_ADC_DELAY, &val);
|
|
} while (val & MESON_SAR_ADC_DELAY_BL30_BUSY && timeout--);
|
|
|
|
if (timeout < 0) {
|
|
printf("Timeout while waiting for BL30 unlock\n");
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void meson_saradc_unlock(struct meson_saradc_priv *priv)
|
|
{
|
|
/* allow BL30 to use the SAR ADC again */
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
|
|
MESON_SAR_ADC_DELAY_KERNEL_BUSY, 0);
|
|
}
|
|
|
|
static void meson_saradc_clear_fifo(struct meson_saradc_priv *priv)
|
|
{
|
|
unsigned int count, tmp;
|
|
|
|
for (count = 0; count < MESON_SAR_ADC_MAX_FIFO_SIZE; count++) {
|
|
if (!meson_saradc_get_fifo_count(priv))
|
|
break;
|
|
|
|
regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, &tmp);
|
|
}
|
|
}
|
|
|
|
static int meson_saradc_calib_val(struct meson_saradc_priv *priv, int val)
|
|
{
|
|
int tmp;
|
|
|
|
/* use val_calib = scale * val_raw + offset calibration function */
|
|
tmp = div_s64((s64)val * priv->calibscale, MILLION) + priv->calibbias;
|
|
|
|
return clamp(tmp, 0, (1 << priv->data->num_bits) - 1);
|
|
}
|
|
|
|
static int meson_saradc_wait_busy_clear(struct meson_saradc_priv *priv)
|
|
{
|
|
uint regval, timeout = 10000;
|
|
|
|
/*
|
|
* NOTE: we need a small delay before reading the status, otherwise
|
|
* the sample engine may not have started internally (which would
|
|
* seem to us that sampling is already finished).
|
|
*/
|
|
do {
|
|
udelay(1);
|
|
regmap_read(priv->regmap, MESON_SAR_ADC_REG0, ®val);
|
|
} while (FIELD_GET(MESON_SAR_ADC_REG0_BUSY_MASK, regval) && timeout--);
|
|
|
|
if (timeout < 0)
|
|
return -ETIMEDOUT;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_saradc_read_raw_sample(struct meson_saradc_priv *priv,
|
|
unsigned int channel, uint *val)
|
|
{
|
|
uint regval, fifo_chan, fifo_val, count;
|
|
int ret;
|
|
|
|
ret = meson_saradc_wait_busy_clear(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
count = meson_saradc_get_fifo_count(priv);
|
|
if (count != 1) {
|
|
printf("ADC FIFO has %d element(s) instead of one\n", count);
|
|
return -EINVAL;
|
|
}
|
|
|
|
regmap_read(priv->regmap, MESON_SAR_ADC_FIFO_RD, ®val);
|
|
fifo_chan = FIELD_GET(MESON_SAR_ADC_FIFO_RD_CHAN_ID_MASK, regval);
|
|
if (fifo_chan != channel) {
|
|
printf("ADC FIFO entry belongs to channel %d instead of %d\n",
|
|
fifo_chan, channel);
|
|
return -EINVAL;
|
|
}
|
|
|
|
fifo_val = FIELD_GET(MESON_SAR_ADC_FIFO_RD_SAMPLE_VALUE_MASK, regval);
|
|
fifo_val &= GENMASK(priv->data->num_bits - 1, 0);
|
|
*val = meson_saradc_calib_val(priv, fifo_val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void meson_saradc_start_sample_engine(struct meson_saradc_priv *priv)
|
|
{
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_FIFO_IRQ_EN,
|
|
MESON_SAR_ADC_REG0_FIFO_IRQ_EN);
|
|
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE,
|
|
MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE);
|
|
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_SAMPLING_START,
|
|
MESON_SAR_ADC_REG0_SAMPLING_START);
|
|
}
|
|
|
|
static void meson_saradc_stop_sample_engine(struct meson_saradc_priv *priv)
|
|
{
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_FIFO_IRQ_EN, 0);
|
|
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_SAMPLING_STOP,
|
|
MESON_SAR_ADC_REG0_SAMPLING_STOP);
|
|
|
|
/* wait until all modules are stopped */
|
|
meson_saradc_wait_busy_clear(priv);
|
|
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_SAMPLE_ENGINE_ENABLE, 0);
|
|
}
|
|
|
|
enum meson_saradc_avg_mode {
|
|
NO_AVERAGING = 0x0,
|
|
MEAN_AVERAGING = 0x1,
|
|
MEDIAN_AVERAGING = 0x2,
|
|
};
|
|
|
|
enum meson_saradc_num_samples {
|
|
ONE_SAMPLE = 0x0,
|
|
TWO_SAMPLES = 0x1,
|
|
FOUR_SAMPLES = 0x2,
|
|
EIGHT_SAMPLES = 0x3,
|
|
};
|
|
|
|
static void meson_saradc_set_averaging(struct meson_saradc_priv *priv,
|
|
unsigned int channel,
|
|
enum meson_saradc_avg_mode mode,
|
|
enum meson_saradc_num_samples samples)
|
|
{
|
|
int val;
|
|
|
|
val = samples << MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_SHIFT(channel);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_AVG_CNTL,
|
|
MESON_SAR_ADC_AVG_CNTL_NUM_SAMPLES_MASK(channel),
|
|
val);
|
|
|
|
val = mode << MESON_SAR_ADC_AVG_CNTL_AVG_MODE_SHIFT(channel);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_AVG_CNTL,
|
|
MESON_SAR_ADC_AVG_CNTL_AVG_MODE_MASK(channel), val);
|
|
}
|
|
|
|
static void meson_saradc_enable_channel(struct meson_saradc_priv *priv,
|
|
unsigned int channel)
|
|
{
|
|
uint regval;
|
|
|
|
/*
|
|
* the SAR ADC engine allows sampling multiple channels at the same
|
|
* time. to keep it simple we're only working with one *internal*
|
|
* channel, which starts counting at index 0 (which means: count = 1).
|
|
*/
|
|
regval = FIELD_PREP(MESON_SAR_ADC_CHAN_LIST_MAX_INDEX_MASK, 0);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_LIST,
|
|
MESON_SAR_ADC_CHAN_LIST_MAX_INDEX_MASK, regval);
|
|
|
|
/* map channel index 0 to the channel which we want to read */
|
|
regval = FIELD_PREP(MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(0), channel);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_LIST,
|
|
MESON_SAR_ADC_CHAN_LIST_ENTRY_MASK(0), regval);
|
|
|
|
regval = FIELD_PREP(MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK,
|
|
channel);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DETECT_IDLE_SW,
|
|
MESON_SAR_ADC_DETECT_IDLE_SW_DETECT_MUX_MASK,
|
|
regval);
|
|
|
|
regval = FIELD_PREP(MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK,
|
|
channel);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DETECT_IDLE_SW,
|
|
MESON_SAR_ADC_DETECT_IDLE_SW_IDLE_MUX_SEL_MASK,
|
|
regval);
|
|
|
|
if (channel == 6)
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELTA_10,
|
|
MESON_SAR_ADC_DELTA_10_TEMP_SEL, 0);
|
|
}
|
|
|
|
static int meson_saradc_get_sample(struct meson_saradc_priv *priv,
|
|
int chan, uint *val)
|
|
{
|
|
int ret;
|
|
|
|
ret = meson_saradc_lock(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
/* clear the FIFO to make sure we're not reading old values */
|
|
meson_saradc_clear_fifo(priv);
|
|
|
|
meson_saradc_set_averaging(priv, chan, MEAN_AVERAGING, EIGHT_SAMPLES);
|
|
|
|
meson_saradc_enable_channel(priv, chan);
|
|
|
|
meson_saradc_start_sample_engine(priv);
|
|
ret = meson_saradc_read_raw_sample(priv, chan, val);
|
|
meson_saradc_stop_sample_engine(priv);
|
|
|
|
meson_saradc_unlock(priv);
|
|
|
|
if (ret) {
|
|
printf("failed to read sample for channel %d: %d\n",
|
|
chan, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_saradc_channel_data(struct udevice *dev, int channel,
|
|
unsigned int *data)
|
|
{
|
|
struct meson_saradc_priv *priv = dev_get_priv(dev);
|
|
|
|
if (channel != priv->active_channel) {
|
|
pr_err("Requested channel is not active!");
|
|
return -EINVAL;
|
|
}
|
|
|
|
return meson_saradc_get_sample(priv, channel, data);
|
|
}
|
|
|
|
enum meson_saradc_chan7_mux_sel {
|
|
CHAN7_MUX_VSS = 0x0,
|
|
CHAN7_MUX_VDD_DIV4 = 0x1,
|
|
CHAN7_MUX_VDD_DIV2 = 0x2,
|
|
CHAN7_MUX_VDD_MUL3_DIV4 = 0x3,
|
|
CHAN7_MUX_VDD = 0x4,
|
|
CHAN7_MUX_CH7_INPUT = 0x7,
|
|
};
|
|
|
|
static void meson_saradc_set_chan7_mux(struct meson_saradc_priv *priv,
|
|
enum meson_saradc_chan7_mux_sel sel)
|
|
{
|
|
u32 regval;
|
|
|
|
regval = FIELD_PREP(MESON_SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK, sel);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
|
|
MESON_SAR_ADC_REG3_CTRL_CHAN7_MUX_SEL_MASK, regval);
|
|
|
|
udelay(20);
|
|
}
|
|
|
|
static int meson_saradc_calib(struct meson_saradc_priv *priv)
|
|
{
|
|
uint nominal0, nominal1, value0, value1;
|
|
int ret;
|
|
|
|
/* use points 25% and 75% for calibration */
|
|
nominal0 = (1 << priv->data->num_bits) / 4;
|
|
nominal1 = (1 << priv->data->num_bits) * 3 / 4;
|
|
|
|
meson_saradc_set_chan7_mux(priv, CHAN7_MUX_VDD_DIV4);
|
|
udelay(20);
|
|
ret = meson_saradc_get_sample(priv, 7, &value0);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
meson_saradc_set_chan7_mux(priv, CHAN7_MUX_VDD_MUL3_DIV4);
|
|
udelay(20);
|
|
ret = meson_saradc_get_sample(priv, 7, &value1);
|
|
if (ret < 0)
|
|
goto out;
|
|
|
|
if (value1 <= value0) {
|
|
ret = -EINVAL;
|
|
goto out;
|
|
}
|
|
|
|
priv->calibscale = div_s64((nominal1 - nominal0) * (s64)MILLION,
|
|
value1 - value0);
|
|
priv->calibbias = nominal0 - div_s64((s64)value0 * priv->calibscale,
|
|
MILLION);
|
|
ret = 0;
|
|
out:
|
|
meson_saradc_set_chan7_mux(priv, CHAN7_MUX_CH7_INPUT);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int meson_saradc_init(struct meson_saradc_priv *priv)
|
|
{
|
|
uint regval;
|
|
int ret, i;
|
|
|
|
priv->calibscale = MILLION;
|
|
|
|
/*
|
|
* make sure we start at CH7 input since the other muxes are only used
|
|
* for internal calibration.
|
|
*/
|
|
meson_saradc_set_chan7_mux(priv, CHAN7_MUX_CH7_INPUT);
|
|
|
|
/*
|
|
* leave sampling delay and the input clocks as configured by
|
|
* BL30 to make sure BL30 gets the values it expects when
|
|
* reading the temperature sensor.
|
|
*/
|
|
regmap_read(priv->regmap, MESON_SAR_ADC_REG3, ®val);
|
|
if (regval & MESON_SAR_ADC_REG3_BL30_INITIALIZED)
|
|
return 0;
|
|
|
|
meson_saradc_stop_sample_engine(priv);
|
|
|
|
/* update the channel 6 MUX to select the temperature sensor */
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL,
|
|
MESON_SAR_ADC_REG0_ADC_TEMP_SEN_SEL);
|
|
|
|
/* disable all channels by default */
|
|
regmap_write(priv->regmap, MESON_SAR_ADC_CHAN_LIST, 0x0);
|
|
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
|
|
MESON_SAR_ADC_REG3_CTRL_SAMPLING_CLOCK_PHASE, 0);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
|
|
MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY,
|
|
MESON_SAR_ADC_REG3_CNTL_USE_SC_DLY);
|
|
|
|
/* delay between two samples = (10+1) * 1uS */
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
|
|
MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK,
|
|
FIELD_PREP(MESON_SAR_ADC_DELAY_SAMPLE_DLY_CNT_MASK,
|
|
10));
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
|
|
MESON_SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK,
|
|
FIELD_PREP(MESON_SAR_ADC_DELAY_SAMPLE_DLY_SEL_MASK,
|
|
0));
|
|
|
|
/* delay between two samples = (10+1) * 1uS */
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
|
|
MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK,
|
|
FIELD_PREP(MESON_SAR_ADC_DELAY_INPUT_DLY_CNT_MASK,
|
|
10));
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_DELAY,
|
|
MESON_SAR_ADC_DELAY_INPUT_DLY_SEL_MASK,
|
|
FIELD_PREP(MESON_SAR_ADC_DELAY_INPUT_DLY_SEL_MASK,
|
|
1));
|
|
|
|
/*
|
|
* set up the input channel muxes in MESON_SAR_ADC_CHAN_10_SW
|
|
* (0 = SAR_ADC_CH0, 1 = SAR_ADC_CH1)
|
|
*/
|
|
regval = FIELD_PREP(MESON_SAR_ADC_CHAN_10_SW_CHAN0_MUX_SEL_MASK, 0);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
|
|
MESON_SAR_ADC_CHAN_10_SW_CHAN0_MUX_SEL_MASK,
|
|
regval);
|
|
regval = FIELD_PREP(MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK, 1);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_CHAN_10_SW,
|
|
MESON_SAR_ADC_CHAN_10_SW_CHAN1_MUX_SEL_MASK,
|
|
regval);
|
|
|
|
/*
|
|
* set up the input channel muxes in MESON_SAR_ADC_AUX_SW
|
|
* (2 = SAR_ADC_CH2, 3 = SAR_ADC_CH3, ...) and enable
|
|
* MESON_SAR_ADC_AUX_SW_YP_DRIVE_SW and
|
|
* MESON_SAR_ADC_AUX_SW_XP_DRIVE_SW like the vendor driver.
|
|
*/
|
|
regval = 0;
|
|
for (i = 2; i <= 7; i++)
|
|
regval |= i << MESON_SAR_ADC_AUX_SW_MUX_SEL_CHAN_SHIFT(i);
|
|
regval |= MESON_SAR_ADC_AUX_SW_YP_DRIVE_SW;
|
|
regval |= MESON_SAR_ADC_AUX_SW_XP_DRIVE_SW;
|
|
regmap_write(priv->regmap, MESON_SAR_ADC_AUX_SW, regval);
|
|
|
|
ret = meson_saradc_lock(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_enable(&priv->core_clk);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
regval = FIELD_PREP(MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, 1);
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG0,
|
|
MESON_SAR_ADC_REG0_FIFO_CNT_IRQ_MASK, regval);
|
|
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG11,
|
|
MESON_SAR_ADC_REG11_BANDGAP_EN,
|
|
MESON_SAR_ADC_REG11_BANDGAP_EN);
|
|
|
|
regmap_update_bits(priv->regmap, MESON_SAR_ADC_REG3,
|
|
MESON_SAR_ADC_REG3_ADC_EN,
|
|
MESON_SAR_ADC_REG3_ADC_EN);
|
|
|
|
udelay(5);
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_enable(&priv->adc_clk);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
meson_saradc_unlock(priv);
|
|
|
|
ret = meson_saradc_calib(priv);
|
|
if (ret) {
|
|
printf("calibration failed\n");
|
|
return -EIO;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_saradc_start_channel(struct udevice *dev, int channel)
|
|
{
|
|
struct meson_saradc_priv *priv = dev_get_priv(dev);
|
|
|
|
if (channel < 0 || channel >= NUM_CHANNELS) {
|
|
printf("Requested channel is invalid!");
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!priv->initialized) {
|
|
int ret;
|
|
|
|
ret = meson_saradc_init(priv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
priv->initialized = true;
|
|
}
|
|
|
|
priv->active_channel = channel;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_saradc_stop(struct udevice *dev)
|
|
{
|
|
struct meson_saradc_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->active_channel = -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int meson_saradc_probe(struct udevice *dev)
|
|
{
|
|
struct meson_saradc_priv *priv = dev_get_priv(dev);
|
|
int ret;
|
|
|
|
ret = regmap_init_mem(dev_ofnode(dev), &priv->regmap);
|
|
if (ret)
|
|
return ret;
|
|
|
|
#if CONFIG_IS_ENABLED(CLK)
|
|
ret = clk_get_by_name(dev, "core", &priv->core_clk);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = clk_get_by_name(dev, "adc_clk", &priv->adc_clk);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
priv->active_channel = -1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
int meson_saradc_ofdata_to_platdata(struct udevice *dev)
|
|
{
|
|
struct adc_uclass_platdata *uc_pdata = dev_get_uclass_platdata(dev);
|
|
struct meson_saradc_priv *priv = dev_get_priv(dev);
|
|
|
|
priv->data = (struct meson_saradc_data *)dev_get_driver_data(dev);
|
|
|
|
uc_pdata->data_mask = GENMASK(priv->data->num_bits - 1, 0);
|
|
uc_pdata->data_format = ADC_DATA_FORMAT_BIN;
|
|
uc_pdata->data_timeout_us = MESON_SAR_ADC_TIMEOUT * 1000;
|
|
uc_pdata->channel_mask = GENMASK(NUM_CHANNELS - 1, 0);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct adc_ops meson_saradc_ops = {
|
|
.start_channel = meson_saradc_start_channel,
|
|
.channel_data = meson_saradc_channel_data,
|
|
.stop = meson_saradc_stop,
|
|
};
|
|
|
|
static const struct meson_saradc_data gxbb_saradc_data = {
|
|
.num_bits = 10,
|
|
};
|
|
|
|
static const struct meson_saradc_data gxl_saradc_data = {
|
|
.num_bits = 12,
|
|
};
|
|
|
|
static const struct udevice_id meson_saradc_ids[] = {
|
|
{ .compatible = "amlogic,meson-gxbb-saradc",
|
|
.data = (ulong)&gxbb_saradc_data },
|
|
{ .compatible = "amlogic,meson-gxl-saradc",
|
|
.data = (ulong)&gxl_saradc_data },
|
|
{ .compatible = "amlogic,meson-gxm-saradc",
|
|
.data = (ulong)&gxl_saradc_data },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(meson_saradc) = {
|
|
.name = "meson_saradc",
|
|
.id = UCLASS_ADC,
|
|
.of_match = meson_saradc_ids,
|
|
.ops = &meson_saradc_ops,
|
|
.probe = meson_saradc_probe,
|
|
.ofdata_to_platdata = meson_saradc_ofdata_to_platdata,
|
|
.priv_auto_alloc_size = sizeof(struct meson_saradc_priv),
|
|
};
|