mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-17 02:08:38 +00:00
337e92e79c
Currently the default initialisation frequency is 50MHz. Although this does appear to be suitable for some LPDDR4 RAM chips, training at this low frequency has been seen to cause Column errors, leading to Capacity check errors on others. Here we force RAM initialisation to happen at 400MHz before ramping up to the final value running value of 800MHz after everything has been successfully configured. Link: https://lore.kernel.org/u-boot/Yo4v3jUeHXTovjOH@google.com/ Suggested-by: YouMin Chen <cym@rock-chips.com> Signed-off-by: Lee Jones <lee@kernel.org> Tested-by: Xavier Drudis Ferran <xdrudis@tinet.cat> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Michal Suchánek <msuchanek@suse.de>
3194 lines
91 KiB
C
3194 lines
91 KiB
C
// SPDX-License-Identifier: GPL-2.0+ OR BSD-3-Clause
|
|
/*
|
|
* (C) Copyright 2016-2017 Rockchip Inc.
|
|
*
|
|
* Adapted from coreboot.
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <clk.h>
|
|
#include <dm.h>
|
|
#include <dt-structs.h>
|
|
#include <init.h>
|
|
#include <log.h>
|
|
#include <ram.h>
|
|
#include <regmap.h>
|
|
#include <syscon.h>
|
|
#include <asm/io.h>
|
|
#include <asm/arch-rockchip/clock.h>
|
|
#include <asm/arch-rockchip/cru.h>
|
|
#include <asm/arch-rockchip/grf_rk3399.h>
|
|
#include <asm/arch-rockchip/pmu_rk3399.h>
|
|
#include <asm/arch-rockchip/hardware.h>
|
|
#include <asm/arch-rockchip/sdram.h>
|
|
#include <asm/arch-rockchip/sdram_rk3399.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/err.h>
|
|
#include <time.h>
|
|
|
|
#define PRESET_SGRF_HOLD(n) ((0x1 << (6 + 16)) | ((n) << 6))
|
|
#define PRESET_GPIO0_HOLD(n) ((0x1 << (7 + 16)) | ((n) << 7))
|
|
#define PRESET_GPIO1_HOLD(n) ((0x1 << (8 + 16)) | ((n) << 8))
|
|
|
|
#define PHY_DRV_ODT_HI_Z 0x0
|
|
#define PHY_DRV_ODT_240 0x1
|
|
#define PHY_DRV_ODT_120 0x8
|
|
#define PHY_DRV_ODT_80 0x9
|
|
#define PHY_DRV_ODT_60 0xc
|
|
#define PHY_DRV_ODT_48 0xd
|
|
#define PHY_DRV_ODT_40 0xe
|
|
#define PHY_DRV_ODT_34_3 0xf
|
|
|
|
#define PHY_BOOSTP_EN 0x1
|
|
#define PHY_BOOSTN_EN 0x1
|
|
#define PHY_SLEWP_EN 0x1
|
|
#define PHY_SLEWN_EN 0x1
|
|
#define PHY_RX_CM_INPUT 0x1
|
|
#define CS0_MR22_VAL 0
|
|
#define CS1_MR22_VAL 3
|
|
|
|
/* LPDDR3 DRAM DS */
|
|
#define LPDDR3_DS_34 0x1
|
|
#define LPDDR3_DS_40 0x2
|
|
#define LPDDR3_DS_48 0x3
|
|
|
|
#define CRU_SFTRST_DDR_CTRL(ch, n) ((0x1 << (8 + 16 + (ch) * 4)) | \
|
|
((n) << (8 + (ch) * 4)))
|
|
#define CRU_SFTRST_DDR_PHY(ch, n) ((0x1 << (9 + 16 + (ch) * 4)) | \
|
|
((n) << (9 + (ch) * 4)))
|
|
struct chan_info {
|
|
struct rk3399_ddr_pctl_regs *pctl;
|
|
struct rk3399_ddr_pi_regs *pi;
|
|
struct rk3399_ddr_publ_regs *publ;
|
|
struct msch_regs *msch;
|
|
};
|
|
|
|
struct dram_info {
|
|
#if defined(CONFIG_TPL_BUILD) || \
|
|
(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
|
|
u32 pwrup_srefresh_exit[2];
|
|
struct chan_info chan[2];
|
|
struct clk ddr_clk;
|
|
struct rockchip_cru *cru;
|
|
struct rk3399_grf_regs *grf;
|
|
struct rk3399_pmu_regs *pmu;
|
|
struct rk3399_pmucru *pmucru;
|
|
struct rk3399_pmusgrf_regs *pmusgrf;
|
|
struct rk3399_ddr_cic_regs *cic;
|
|
const struct sdram_rk3399_ops *ops;
|
|
#endif
|
|
struct ram_info info;
|
|
struct rk3399_pmugrf_regs *pmugrf;
|
|
};
|
|
|
|
struct sdram_rk3399_ops {
|
|
int (*data_training_first)(struct dram_info *dram, u32 channel, u8 rank,
|
|
struct rk3399_sdram_params *sdram);
|
|
int (*set_rate_index)(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params, u32 ctl_fn);
|
|
void (*modify_param)(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params);
|
|
struct rk3399_sdram_params *
|
|
(*get_phy_index_params)(u32 phy_fn,
|
|
struct rk3399_sdram_params *params);
|
|
};
|
|
|
|
#if defined(CONFIG_TPL_BUILD) || \
|
|
(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
|
|
|
|
struct rockchip_dmc_plat {
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
struct dtd_rockchip_rk3399_dmc dtplat;
|
|
#else
|
|
struct rk3399_sdram_params sdram_params;
|
|
#endif
|
|
struct regmap *map;
|
|
};
|
|
|
|
struct io_setting {
|
|
u32 mhz;
|
|
u32 mr5;
|
|
/* dram side */
|
|
u32 dq_odt;
|
|
u32 ca_odt;
|
|
u32 pdds;
|
|
u32 dq_vref;
|
|
u32 ca_vref;
|
|
/* phy side */
|
|
u32 rd_odt;
|
|
u32 wr_dq_drv;
|
|
u32 wr_ca_drv;
|
|
u32 wr_ckcs_drv;
|
|
u32 rd_odt_en;
|
|
u32 rd_vref;
|
|
} lpddr4_io_setting[] = {
|
|
{
|
|
50 * MHz,
|
|
0,
|
|
/* dram side */
|
|
0, /* dq_odt; */
|
|
0, /* ca_odt; */
|
|
6, /* pdds; */
|
|
0x72, /* dq_vref; */
|
|
0x72, /* ca_vref; */
|
|
/* phy side */
|
|
PHY_DRV_ODT_HI_Z, /* rd_odt; */
|
|
PHY_DRV_ODT_40, /* wr_dq_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ca_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ckcs_drv; */
|
|
0, /* rd_odt_en;*/
|
|
41, /* rd_vref; (unit %, range 3.3% - 48.7%) */
|
|
},
|
|
{
|
|
600 * MHz,
|
|
0,
|
|
/* dram side */
|
|
1, /* dq_odt; */
|
|
0, /* ca_odt; */
|
|
6, /* pdds; */
|
|
0x72, /* dq_vref; */
|
|
0x72, /* ca_vref; */
|
|
/* phy side */
|
|
PHY_DRV_ODT_HI_Z, /* rd_odt; */
|
|
PHY_DRV_ODT_48, /* wr_dq_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ca_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ckcs_drv; */
|
|
0, /* rd_odt_en; */
|
|
32, /* rd_vref; (unit %, range 3.3% - 48.7%) */
|
|
},
|
|
{
|
|
933 * MHz,
|
|
0,
|
|
/* dram side */
|
|
1, /* dq_odt; */
|
|
0, /* ca_odt; */
|
|
3, /* pdds; */
|
|
0x72, /* dq_vref; */
|
|
0x72, /* ca_vref; */
|
|
/* phy side */
|
|
PHY_DRV_ODT_80, /* rd_odt; */
|
|
PHY_DRV_ODT_40, /* wr_dq_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ca_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ckcs_drv; */
|
|
1, /* rd_odt_en; */
|
|
20, /* rd_vref; (unit %, range 3.3% - 48.7%) */
|
|
},
|
|
{
|
|
1066 * MHz,
|
|
0,
|
|
/* dram side */
|
|
6, /* dq_odt; */
|
|
0, /* ca_odt; */
|
|
3, /* pdds; */
|
|
0x10, /* dq_vref; */
|
|
0x72, /* ca_vref; */
|
|
/* phy side */
|
|
PHY_DRV_ODT_80, /* rd_odt; */
|
|
PHY_DRV_ODT_60, /* wr_dq_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ca_drv; */
|
|
PHY_DRV_ODT_40, /* wr_ckcs_drv; */
|
|
1, /* rd_odt_en; */
|
|
20, /* rd_vref; (unit %, range 3.3% - 48.7%) */
|
|
},
|
|
};
|
|
|
|
static struct io_setting *
|
|
lpddr4_get_io_settings(const struct rk3399_sdram_params *params, u32 mr5)
|
|
{
|
|
struct io_setting *io = NULL;
|
|
u32 n;
|
|
|
|
for (n = 0; n < ARRAY_SIZE(lpddr4_io_setting); n++) {
|
|
io = &lpddr4_io_setting[n];
|
|
|
|
if (io->mr5 != 0) {
|
|
if (io->mhz >= params->base.ddr_freq &&
|
|
io->mr5 == mr5)
|
|
break;
|
|
} else {
|
|
if (io->mhz >= params->base.ddr_freq)
|
|
break;
|
|
}
|
|
}
|
|
|
|
return io;
|
|
}
|
|
|
|
static void *get_denali_ctl(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, bool reg)
|
|
{
|
|
return reg ? &chan->pctl->denali_ctl : ¶ms->pctl_regs.denali_ctl;
|
|
}
|
|
|
|
static void *get_denali_phy(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, bool reg)
|
|
{
|
|
return reg ? &chan->publ->denali_phy : ¶ms->phy_regs.denali_phy;
|
|
}
|
|
|
|
static void *get_ddrc0_con(struct dram_info *dram, u8 channel)
|
|
{
|
|
return (channel == 0) ? &dram->grf->ddrc0_con0 : &dram->grf->ddrc1_con0;
|
|
}
|
|
|
|
static void rkclk_ddr_reset(struct rockchip_cru *cru, u32 channel, u32 ctl,
|
|
u32 phy)
|
|
{
|
|
channel &= 0x1;
|
|
ctl &= 0x1;
|
|
phy &= 0x1;
|
|
writel(CRU_SFTRST_DDR_CTRL(channel, ctl) |
|
|
CRU_SFTRST_DDR_PHY(channel, phy),
|
|
&cru->softrst_con[4]);
|
|
}
|
|
|
|
static void phy_pctrl_reset(struct rockchip_cru *cru, u32 channel)
|
|
{
|
|
rkclk_ddr_reset(cru, channel, 1, 1);
|
|
udelay(10);
|
|
|
|
rkclk_ddr_reset(cru, channel, 1, 0);
|
|
udelay(10);
|
|
|
|
rkclk_ddr_reset(cru, channel, 0, 0);
|
|
udelay(10);
|
|
}
|
|
|
|
static void phy_dll_bypass_set(struct rk3399_ddr_publ_regs *ddr_publ_regs,
|
|
u32 freq)
|
|
{
|
|
u32 *denali_phy = ddr_publ_regs->denali_phy;
|
|
|
|
/* From IP spec, only freq small than 125 can enter dll bypass mode */
|
|
if (freq <= 125) {
|
|
/* phy_sw_master_mode_X PHY_86/214/342/470 4bits offset_8 */
|
|
setbits_le32(&denali_phy[86], (0x3 << 2) << 8);
|
|
setbits_le32(&denali_phy[214], (0x3 << 2) << 8);
|
|
setbits_le32(&denali_phy[342], (0x3 << 2) << 8);
|
|
setbits_le32(&denali_phy[470], (0x3 << 2) << 8);
|
|
|
|
/* phy_adrctl_sw_master_mode PHY_547/675/803 4bits offset_16 */
|
|
setbits_le32(&denali_phy[547], (0x3 << 2) << 16);
|
|
setbits_le32(&denali_phy[675], (0x3 << 2) << 16);
|
|
setbits_le32(&denali_phy[803], (0x3 << 2) << 16);
|
|
} else {
|
|
/* phy_sw_master_mode_X PHY_86/214/342/470 4bits offset_8 */
|
|
clrbits_le32(&denali_phy[86], (0x3 << 2) << 8);
|
|
clrbits_le32(&denali_phy[214], (0x3 << 2) << 8);
|
|
clrbits_le32(&denali_phy[342], (0x3 << 2) << 8);
|
|
clrbits_le32(&denali_phy[470], (0x3 << 2) << 8);
|
|
|
|
/* phy_adrctl_sw_master_mode PHY_547/675/803 4bits offset_16 */
|
|
clrbits_le32(&denali_phy[547], (0x3 << 2) << 16);
|
|
clrbits_le32(&denali_phy[675], (0x3 << 2) << 16);
|
|
clrbits_le32(&denali_phy[803], (0x3 << 2) << 16);
|
|
}
|
|
}
|
|
|
|
static void set_memory_map(const struct chan_info *chan, u32 channel,
|
|
const struct rk3399_sdram_params *params)
|
|
{
|
|
const struct rk3399_sdram_channel *sdram_ch = ¶ms->ch[channel];
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 cs_map;
|
|
u32 reduc;
|
|
u32 row;
|
|
|
|
/* Get row number from ddrconfig setting */
|
|
if (sdram_ch->cap_info.ddrconfig < 2 ||
|
|
sdram_ch->cap_info.ddrconfig == 4)
|
|
row = 16;
|
|
else if (sdram_ch->cap_info.ddrconfig == 3 ||
|
|
sdram_ch->cap_info.ddrconfig == 5)
|
|
row = 14;
|
|
else
|
|
row = 15;
|
|
|
|
cs_map = (sdram_ch->cap_info.rank > 1) ? 3 : 1;
|
|
reduc = (sdram_ch->cap_info.bw == 2) ? 0 : 1;
|
|
|
|
/* Set the dram configuration to ctrl */
|
|
clrsetbits_le32(&denali_ctl[191], 0xF, (12 - sdram_ch->cap_info.col));
|
|
clrsetbits_le32(&denali_ctl[190], (0x3 << 16) | (0x7 << 24),
|
|
((3 - sdram_ch->cap_info.bk) << 16) |
|
|
((16 - row) << 24));
|
|
|
|
clrsetbits_le32(&denali_ctl[196], 0x3 | (1 << 16),
|
|
cs_map | (reduc << 16));
|
|
|
|
/* PI_199 PI_COL_DIFF:RW:0:4 */
|
|
clrsetbits_le32(&denali_pi[199], 0xF, (12 - sdram_ch->cap_info.col));
|
|
|
|
/* PI_155 PI_ROW_DIFF:RW:24:3 PI_BANK_DIFF:RW:16:2 */
|
|
clrsetbits_le32(&denali_pi[155], (0x3 << 16) | (0x7 << 24),
|
|
((3 - sdram_ch->cap_info.bk) << 16) |
|
|
((16 - row) << 24));
|
|
|
|
if (params->base.dramtype == LPDDR4) {
|
|
if (cs_map == 1)
|
|
cs_map = 0x5;
|
|
else if (cs_map == 2)
|
|
cs_map = 0xa;
|
|
else
|
|
cs_map = 0xF;
|
|
}
|
|
|
|
/* PI_41 PI_CS_MAP:RW:24:4 */
|
|
clrsetbits_le32(&denali_pi[41], 0xf << 24, cs_map << 24);
|
|
if (sdram_ch->cap_info.rank == 1 && params->base.dramtype == DDR3)
|
|
writel(0x2EC7FFFF, &denali_pi[34]);
|
|
}
|
|
|
|
static int phy_io_config(u32 *denali_phy, u32 *denali_ctl,
|
|
const struct rk3399_sdram_params *params, u32 mr5)
|
|
{
|
|
u32 vref_mode_dq, vref_value_dq, vref_mode_ac, vref_value_ac;
|
|
u32 mode_sel;
|
|
u32 speed;
|
|
u32 reg_value;
|
|
u32 ds_value, odt_value;
|
|
|
|
/* vref setting & mode setting */
|
|
if (params->base.dramtype == LPDDR4) {
|
|
struct io_setting *io = lpddr4_get_io_settings(params, mr5);
|
|
u32 rd_vref = io->rd_vref * 1000;
|
|
|
|
if (rd_vref < 36700) {
|
|
/* MODE_LV[2:0] = LPDDR4 (Range 2)*/
|
|
vref_mode_dq = 0x7;
|
|
/* MODE[2:0]= LPDDR4 Range 2(0.4*VDDQ) */
|
|
mode_sel = 0x5;
|
|
vref_value_dq = (rd_vref - 3300) / 521;
|
|
} else {
|
|
/* MODE_LV[2:0] = LPDDR4 (Range 1)*/
|
|
vref_mode_dq = 0x6;
|
|
/* MODE[2:0]= LPDDR4 Range 1(0.33*VDDQ) */
|
|
mode_sel = 0x4;
|
|
vref_value_dq = (rd_vref - 15300) / 521;
|
|
}
|
|
vref_mode_ac = 0x6;
|
|
/* VDDQ/3/2=16.8% */
|
|
vref_value_ac = 0x3;
|
|
} else if (params->base.dramtype == LPDDR3) {
|
|
if (params->base.odt == 1) {
|
|
vref_mode_dq = 0x5; /* LPDDR3 ODT */
|
|
ds_value = readl(&denali_ctl[138]) & 0xf;
|
|
odt_value = (readl(&denali_phy[6]) >> 4) & 0xf;
|
|
if (ds_value == LPDDR3_DS_48) {
|
|
switch (odt_value) {
|
|
case PHY_DRV_ODT_240:
|
|
vref_value_dq = 0x1B;
|
|
break;
|
|
case PHY_DRV_ODT_120:
|
|
vref_value_dq = 0x26;
|
|
break;
|
|
case PHY_DRV_ODT_60:
|
|
vref_value_dq = 0x36;
|
|
break;
|
|
default:
|
|
debug("Invalid ODT value.\n");
|
|
return -EINVAL;
|
|
}
|
|
} else if (ds_value == LPDDR3_DS_40) {
|
|
switch (odt_value) {
|
|
case PHY_DRV_ODT_240:
|
|
vref_value_dq = 0x19;
|
|
break;
|
|
case PHY_DRV_ODT_120:
|
|
vref_value_dq = 0x23;
|
|
break;
|
|
case PHY_DRV_ODT_60:
|
|
vref_value_dq = 0x31;
|
|
break;
|
|
default:
|
|
debug("Invalid ODT value.\n");
|
|
return -EINVAL;
|
|
}
|
|
} else if (ds_value == LPDDR3_DS_34) {
|
|
switch (odt_value) {
|
|
case PHY_DRV_ODT_240:
|
|
vref_value_dq = 0x17;
|
|
break;
|
|
case PHY_DRV_ODT_120:
|
|
vref_value_dq = 0x20;
|
|
break;
|
|
case PHY_DRV_ODT_60:
|
|
vref_value_dq = 0x2e;
|
|
break;
|
|
default:
|
|
debug("Invalid ODT value.\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
debug("Invalid DRV value.\n");
|
|
return -EINVAL;
|
|
}
|
|
} else {
|
|
vref_mode_dq = 0x2; /* LPDDR3 */
|
|
vref_value_dq = 0x1f;
|
|
}
|
|
vref_mode_ac = 0x2;
|
|
vref_value_ac = 0x1f;
|
|
mode_sel = 0x0;
|
|
} else if (params->base.dramtype == DDR3) {
|
|
/* DDR3L */
|
|
vref_mode_dq = 0x1;
|
|
vref_value_dq = 0x1f;
|
|
vref_mode_ac = 0x1;
|
|
vref_value_ac = 0x1f;
|
|
mode_sel = 0x1;
|
|
} else {
|
|
debug("Unknown DRAM type.\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
reg_value = (vref_mode_dq << 9) | (0x1 << 8) | vref_value_dq;
|
|
|
|
/* PHY_913 PHY_PAD_VREF_CTRL_DQ_0 12bits offset_8 */
|
|
clrsetbits_le32(&denali_phy[913], 0xfff << 8, reg_value << 8);
|
|
/* PHY_914 PHY_PAD_VREF_CTRL_DQ_1 12bits offset_0 */
|
|
clrsetbits_le32(&denali_phy[914], 0xfff, reg_value);
|
|
/* PHY_914 PHY_PAD_VREF_CTRL_DQ_2 12bits offset_16 */
|
|
clrsetbits_le32(&denali_phy[914], 0xfff << 16, reg_value << 16);
|
|
/* PHY_915 PHY_PAD_VREF_CTRL_DQ_3 12bits offset_0 */
|
|
clrsetbits_le32(&denali_phy[915], 0xfff, reg_value);
|
|
|
|
reg_value = (vref_mode_ac << 9) | (0x1 << 8) | vref_value_ac;
|
|
|
|
/* PHY_915 PHY_PAD_VREF_CTRL_AC 12bits offset_16 */
|
|
clrsetbits_le32(&denali_phy[915], 0xfff << 16, reg_value << 16);
|
|
|
|
/* PHY_924 PHY_PAD_FDBK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[924], 0x7 << 15, mode_sel << 15);
|
|
/* PHY_926 PHY_PAD_DATA_DRIVE */
|
|
clrsetbits_le32(&denali_phy[926], 0x7 << 6, mode_sel << 6);
|
|
/* PHY_927 PHY_PAD_DQS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[927], 0x7 << 6, mode_sel << 6);
|
|
/* PHY_928 PHY_PAD_ADDR_DRIVE */
|
|
clrsetbits_le32(&denali_phy[928], 0x7 << 14, mode_sel << 14);
|
|
/* PHY_929 PHY_PAD_CLK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[929], 0x7 << 14, mode_sel << 14);
|
|
/* PHY_935 PHY_PAD_CKE_DRIVE */
|
|
clrsetbits_le32(&denali_phy[935], 0x7 << 14, mode_sel << 14);
|
|
/* PHY_937 PHY_PAD_RST_DRIVE */
|
|
clrsetbits_le32(&denali_phy[937], 0x7 << 14, mode_sel << 14);
|
|
/* PHY_939 PHY_PAD_CS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[939], 0x7 << 14, mode_sel << 14);
|
|
|
|
if (params->base.dramtype == LPDDR4) {
|
|
/* BOOSTP_EN & BOOSTN_EN */
|
|
reg_value = ((PHY_BOOSTP_EN << 4) | PHY_BOOSTN_EN);
|
|
/* PHY_925 PHY_PAD_FDBK_DRIVE2 */
|
|
clrsetbits_le32(&denali_phy[925], 0xff << 8, reg_value << 8);
|
|
/* PHY_926 PHY_PAD_DATA_DRIVE */
|
|
clrsetbits_le32(&denali_phy[926], 0xff << 12, reg_value << 12);
|
|
/* PHY_927 PHY_PAD_DQS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[927], 0xff << 14, reg_value << 14);
|
|
/* PHY_928 PHY_PAD_ADDR_DRIVE */
|
|
clrsetbits_le32(&denali_phy[928], 0xff << 20, reg_value << 20);
|
|
/* PHY_929 PHY_PAD_CLK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[929], 0xff << 22, reg_value << 22);
|
|
/* PHY_935 PHY_PAD_CKE_DRIVE */
|
|
clrsetbits_le32(&denali_phy[935], 0xff << 20, reg_value << 20);
|
|
/* PHY_937 PHY_PAD_RST_DRIVE */
|
|
clrsetbits_le32(&denali_phy[937], 0xff << 20, reg_value << 20);
|
|
/* PHY_939 PHY_PAD_CS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[939], 0xff << 20, reg_value << 20);
|
|
|
|
/* SLEWP_EN & SLEWN_EN */
|
|
reg_value = ((PHY_SLEWP_EN << 3) | PHY_SLEWN_EN);
|
|
/* PHY_924 PHY_PAD_FDBK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[924], 0x3f << 8, reg_value << 8);
|
|
/* PHY_926 PHY_PAD_DATA_DRIVE */
|
|
clrsetbits_le32(&denali_phy[926], 0x3f, reg_value);
|
|
/* PHY_927 PHY_PAD_DQS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[927], 0x3f, reg_value);
|
|
/* PHY_928 PHY_PAD_ADDR_DRIVE */
|
|
clrsetbits_le32(&denali_phy[928], 0x3f << 8, reg_value << 8);
|
|
/* PHY_929 PHY_PAD_CLK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[929], 0x3f << 8, reg_value << 8);
|
|
/* PHY_935 PHY_PAD_CKE_DRIVE */
|
|
clrsetbits_le32(&denali_phy[935], 0x3f << 8, reg_value << 8);
|
|
/* PHY_937 PHY_PAD_RST_DRIVE */
|
|
clrsetbits_le32(&denali_phy[937], 0x3f << 8, reg_value << 8);
|
|
/* PHY_939 PHY_PAD_CS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[939], 0x3f << 8, reg_value << 8);
|
|
}
|
|
|
|
/* speed setting */
|
|
speed = 0x2;
|
|
|
|
/* PHY_924 PHY_PAD_FDBK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[924], 0x3 << 21, speed << 21);
|
|
/* PHY_926 PHY_PAD_DATA_DRIVE */
|
|
clrsetbits_le32(&denali_phy[926], 0x3 << 9, speed << 9);
|
|
/* PHY_927 PHY_PAD_DQS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[927], 0x3 << 9, speed << 9);
|
|
/* PHY_928 PHY_PAD_ADDR_DRIVE */
|
|
clrsetbits_le32(&denali_phy[928], 0x3 << 17, speed << 17);
|
|
/* PHY_929 PHY_PAD_CLK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[929], 0x3 << 17, speed << 17);
|
|
/* PHY_935 PHY_PAD_CKE_DRIVE */
|
|
clrsetbits_le32(&denali_phy[935], 0x3 << 17, speed << 17);
|
|
/* PHY_937 PHY_PAD_RST_DRIVE */
|
|
clrsetbits_le32(&denali_phy[937], 0x3 << 17, speed << 17);
|
|
/* PHY_939 PHY_PAD_CS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[939], 0x3 << 17, speed << 17);
|
|
|
|
if (params->base.dramtype == LPDDR4) {
|
|
/* RX_CM_INPUT */
|
|
reg_value = PHY_RX_CM_INPUT;
|
|
/* PHY_924 PHY_PAD_FDBK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[924], 0x1 << 14, reg_value << 14);
|
|
/* PHY_926 PHY_PAD_DATA_DRIVE */
|
|
clrsetbits_le32(&denali_phy[926], 0x1 << 11, reg_value << 11);
|
|
/* PHY_927 PHY_PAD_DQS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[927], 0x1 << 13, reg_value << 13);
|
|
/* PHY_928 PHY_PAD_ADDR_DRIVE */
|
|
clrsetbits_le32(&denali_phy[928], 0x1 << 19, reg_value << 19);
|
|
/* PHY_929 PHY_PAD_CLK_DRIVE */
|
|
clrsetbits_le32(&denali_phy[929], 0x1 << 21, reg_value << 21);
|
|
/* PHY_935 PHY_PAD_CKE_DRIVE */
|
|
clrsetbits_le32(&denali_phy[935], 0x1 << 19, reg_value << 19);
|
|
/* PHY_937 PHY_PAD_RST_DRIVE */
|
|
clrsetbits_le32(&denali_phy[937], 0x1 << 19, reg_value << 19);
|
|
/* PHY_939 PHY_PAD_CS_DRIVE */
|
|
clrsetbits_le32(&denali_phy[939], 0x1 << 19, reg_value << 19);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_ds_odt(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params,
|
|
bool ctl_phy_reg, u32 mr5)
|
|
{
|
|
u32 *denali_phy = get_denali_phy(chan, params, ctl_phy_reg);
|
|
u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg);
|
|
u32 tsel_idle_en, tsel_wr_en, tsel_rd_en;
|
|
u32 tsel_idle_select_p, tsel_rd_select_p;
|
|
u32 tsel_idle_select_n, tsel_rd_select_n;
|
|
u32 tsel_wr_select_dq_p, tsel_wr_select_ca_p;
|
|
u32 tsel_wr_select_dq_n, tsel_wr_select_ca_n;
|
|
u32 tsel_ckcs_select_p, tsel_ckcs_select_n;
|
|
struct io_setting *io = NULL;
|
|
u32 soc_odt = 0;
|
|
u32 reg_value;
|
|
|
|
if (params->base.dramtype == LPDDR4) {
|
|
io = lpddr4_get_io_settings(params, mr5);
|
|
|
|
tsel_rd_select_p = PHY_DRV_ODT_HI_Z;
|
|
tsel_rd_select_n = io->rd_odt;
|
|
|
|
tsel_idle_select_p = PHY_DRV_ODT_HI_Z;
|
|
tsel_idle_select_n = PHY_DRV_ODT_HI_Z;
|
|
|
|
tsel_wr_select_dq_p = io->wr_dq_drv;
|
|
tsel_wr_select_dq_n = PHY_DRV_ODT_34_3;
|
|
|
|
tsel_wr_select_ca_p = io->wr_ca_drv;
|
|
tsel_wr_select_ca_n = PHY_DRV_ODT_34_3;
|
|
|
|
tsel_ckcs_select_p = io->wr_ckcs_drv;
|
|
tsel_ckcs_select_n = PHY_DRV_ODT_34_3;
|
|
|
|
switch (tsel_rd_select_n) {
|
|
case PHY_DRV_ODT_240:
|
|
soc_odt = 1;
|
|
break;
|
|
case PHY_DRV_ODT_120:
|
|
soc_odt = 2;
|
|
break;
|
|
case PHY_DRV_ODT_80:
|
|
soc_odt = 3;
|
|
break;
|
|
case PHY_DRV_ODT_60:
|
|
soc_odt = 4;
|
|
break;
|
|
case PHY_DRV_ODT_48:
|
|
soc_odt = 5;
|
|
break;
|
|
case PHY_DRV_ODT_40:
|
|
soc_odt = 6;
|
|
break;
|
|
case PHY_DRV_ODT_34_3:
|
|
soc_odt = 6;
|
|
printf("%s: Unable to support LPDDR4 MR22 Soc ODT\n",
|
|
__func__);
|
|
break;
|
|
case PHY_DRV_ODT_HI_Z:
|
|
default:
|
|
soc_odt = 0;
|
|
break;
|
|
}
|
|
} else if (params->base.dramtype == LPDDR3) {
|
|
tsel_rd_select_p = PHY_DRV_ODT_240;
|
|
tsel_rd_select_n = PHY_DRV_ODT_HI_Z;
|
|
|
|
tsel_idle_select_p = PHY_DRV_ODT_240;
|
|
tsel_idle_select_n = PHY_DRV_ODT_HI_Z;
|
|
|
|
tsel_wr_select_dq_p = PHY_DRV_ODT_34_3;
|
|
tsel_wr_select_dq_n = PHY_DRV_ODT_34_3;
|
|
|
|
tsel_wr_select_ca_p = PHY_DRV_ODT_34_3;
|
|
tsel_wr_select_ca_n = PHY_DRV_ODT_34_3;
|
|
|
|
tsel_ckcs_select_p = PHY_DRV_ODT_34_3;
|
|
tsel_ckcs_select_n = PHY_DRV_ODT_34_3;
|
|
} else {
|
|
tsel_rd_select_p = PHY_DRV_ODT_240;
|
|
tsel_rd_select_n = PHY_DRV_ODT_240;
|
|
|
|
tsel_idle_select_p = PHY_DRV_ODT_240;
|
|
tsel_idle_select_n = PHY_DRV_ODT_240;
|
|
|
|
tsel_wr_select_dq_p = PHY_DRV_ODT_34_3;
|
|
tsel_wr_select_dq_n = PHY_DRV_ODT_34_3;
|
|
|
|
tsel_wr_select_ca_p = PHY_DRV_ODT_34_3;
|
|
tsel_wr_select_ca_n = PHY_DRV_ODT_34_3;
|
|
|
|
tsel_ckcs_select_p = PHY_DRV_ODT_34_3;
|
|
tsel_ckcs_select_n = PHY_DRV_ODT_34_3;
|
|
}
|
|
|
|
if (params->base.odt == 1) {
|
|
tsel_rd_en = 1;
|
|
|
|
if (params->base.dramtype == LPDDR4)
|
|
tsel_rd_en = io->rd_odt_en;
|
|
} else {
|
|
tsel_rd_en = 0;
|
|
}
|
|
|
|
tsel_wr_en = 0;
|
|
tsel_idle_en = 0;
|
|
|
|
/* F0_0 */
|
|
clrsetbits_le32(&denali_ctl[145], 0xFF << 16,
|
|
(soc_odt | (CS0_MR22_VAL << 3)) << 16);
|
|
/* F2_0, F1_0 */
|
|
clrsetbits_le32(&denali_ctl[146], 0xFF00FF,
|
|
((soc_odt | (CS0_MR22_VAL << 3)) << 16) |
|
|
(soc_odt | (CS0_MR22_VAL << 3)));
|
|
/* F0_1 */
|
|
clrsetbits_le32(&denali_ctl[159], 0xFF << 16,
|
|
(soc_odt | (CS1_MR22_VAL << 3)) << 16);
|
|
/* F2_1, F1_1 */
|
|
clrsetbits_le32(&denali_ctl[160], 0xFF00FF,
|
|
((soc_odt | (CS1_MR22_VAL << 3)) << 16) |
|
|
(soc_odt | (CS1_MR22_VAL << 3)));
|
|
|
|
/*
|
|
* phy_dq_tsel_select_X 24bits DENALI_PHY_6/134/262/390 offset_0
|
|
* sets termination values for read/idle cycles and drive strength
|
|
* for write cycles for DQ/DM
|
|
*/
|
|
reg_value = tsel_rd_select_n | (tsel_rd_select_p << 0x4) |
|
|
(tsel_wr_select_dq_n << 8) | (tsel_wr_select_dq_p << 12) |
|
|
(tsel_idle_select_n << 16) | (tsel_idle_select_p << 20);
|
|
clrsetbits_le32(&denali_phy[6], 0xffffff, reg_value);
|
|
clrsetbits_le32(&denali_phy[134], 0xffffff, reg_value);
|
|
clrsetbits_le32(&denali_phy[262], 0xffffff, reg_value);
|
|
clrsetbits_le32(&denali_phy[390], 0xffffff, reg_value);
|
|
|
|
/*
|
|
* phy_dqs_tsel_select_X 24bits DENALI_PHY_7/135/263/391 offset_0
|
|
* sets termination values for read/idle cycles and drive strength
|
|
* for write cycles for DQS
|
|
*/
|
|
clrsetbits_le32(&denali_phy[7], 0xffffff, reg_value);
|
|
clrsetbits_le32(&denali_phy[135], 0xffffff, reg_value);
|
|
clrsetbits_le32(&denali_phy[263], 0xffffff, reg_value);
|
|
clrsetbits_le32(&denali_phy[391], 0xffffff, reg_value);
|
|
|
|
/* phy_adr_tsel_select_ 8bits DENALI_PHY_544/672/800 offset_0 */
|
|
reg_value = tsel_wr_select_ca_n | (tsel_wr_select_ca_p << 0x4);
|
|
if (params->base.dramtype == LPDDR4) {
|
|
/* LPDDR4 these register read always return 0, so
|
|
* can not use clrsetbits_le32(), need to write32
|
|
*/
|
|
writel((0x300 << 8) | reg_value, &denali_phy[544]);
|
|
writel((0x300 << 8) | reg_value, &denali_phy[672]);
|
|
writel((0x300 << 8) | reg_value, &denali_phy[800]);
|
|
} else {
|
|
clrsetbits_le32(&denali_phy[544], 0xff, reg_value);
|
|
clrsetbits_le32(&denali_phy[672], 0xff, reg_value);
|
|
clrsetbits_le32(&denali_phy[800], 0xff, reg_value);
|
|
}
|
|
|
|
/* phy_pad_addr_drive 8bits DENALI_PHY_928 offset_0 */
|
|
clrsetbits_le32(&denali_phy[928], 0xff, reg_value);
|
|
|
|
/* phy_pad_rst_drive 8bits DENALI_PHY_937 offset_0 */
|
|
if (!ctl_phy_reg)
|
|
clrsetbits_le32(&denali_phy[937], 0xff, reg_value);
|
|
|
|
/* phy_pad_cke_drive 8bits DENALI_PHY_935 offset_0 */
|
|
clrsetbits_le32(&denali_phy[935], 0xff, reg_value);
|
|
|
|
/* phy_pad_cs_drive 8bits DENALI_PHY_939 offset_0 */
|
|
clrsetbits_le32(&denali_phy[939], 0xff,
|
|
tsel_ckcs_select_n | (tsel_ckcs_select_p << 0x4));
|
|
|
|
/* phy_pad_clk_drive 8bits DENALI_PHY_929 offset_0 */
|
|
clrsetbits_le32(&denali_phy[929], 0xff,
|
|
tsel_ckcs_select_n | (tsel_ckcs_select_p << 0x4));
|
|
|
|
/* phy_pad_fdbk_drive 23bit DENALI_PHY_924/925 */
|
|
clrsetbits_le32(&denali_phy[924], 0xff,
|
|
tsel_wr_select_ca_n | (tsel_wr_select_ca_p << 4));
|
|
clrsetbits_le32(&denali_phy[925], 0xff,
|
|
tsel_wr_select_dq_n | (tsel_wr_select_dq_p << 4));
|
|
|
|
/* phy_dq_tsel_enable_X 3bits DENALI_PHY_5/133/261/389 offset_16 */
|
|
reg_value = (tsel_rd_en | (tsel_wr_en << 1) | (tsel_idle_en << 2))
|
|
<< 16;
|
|
clrsetbits_le32(&denali_phy[5], 0x7 << 16, reg_value);
|
|
clrsetbits_le32(&denali_phy[133], 0x7 << 16, reg_value);
|
|
clrsetbits_le32(&denali_phy[261], 0x7 << 16, reg_value);
|
|
clrsetbits_le32(&denali_phy[389], 0x7 << 16, reg_value);
|
|
|
|
/* phy_dqs_tsel_enable_X 3bits DENALI_PHY_6/134/262/390 offset_24 */
|
|
reg_value = (tsel_rd_en | (tsel_wr_en << 1) | (tsel_idle_en << 2))
|
|
<< 24;
|
|
clrsetbits_le32(&denali_phy[6], 0x7 << 24, reg_value);
|
|
clrsetbits_le32(&denali_phy[134], 0x7 << 24, reg_value);
|
|
clrsetbits_le32(&denali_phy[262], 0x7 << 24, reg_value);
|
|
clrsetbits_le32(&denali_phy[390], 0x7 << 24, reg_value);
|
|
|
|
/* phy_adr_tsel_enable_ 1bit DENALI_PHY_518/646/774 offset_8 */
|
|
reg_value = tsel_wr_en << 8;
|
|
clrsetbits_le32(&denali_phy[518], 0x1 << 8, reg_value);
|
|
clrsetbits_le32(&denali_phy[646], 0x1 << 8, reg_value);
|
|
clrsetbits_le32(&denali_phy[774], 0x1 << 8, reg_value);
|
|
|
|
/* phy_pad_addr_term tsel 1bit DENALI_PHY_933 offset_17 */
|
|
reg_value = tsel_wr_en << 17;
|
|
clrsetbits_le32(&denali_phy[933], 0x1 << 17, reg_value);
|
|
/*
|
|
* pad_rst/cke/cs/clk_term tsel 1bits
|
|
* DENALI_PHY_938/936/940/934 offset_17
|
|
*/
|
|
clrsetbits_le32(&denali_phy[938], 0x1 << 17, reg_value);
|
|
clrsetbits_le32(&denali_phy[936], 0x1 << 17, reg_value);
|
|
clrsetbits_le32(&denali_phy[940], 0x1 << 17, reg_value);
|
|
clrsetbits_le32(&denali_phy[934], 0x1 << 17, reg_value);
|
|
|
|
/* phy_pad_fdbk_term 1bit DENALI_PHY_930 offset_17 */
|
|
clrsetbits_le32(&denali_phy[930], 0x1 << 17, reg_value);
|
|
|
|
phy_io_config(denali_phy, denali_ctl, params, mr5);
|
|
}
|
|
|
|
static void pctl_start(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params,
|
|
u32 channel_mask)
|
|
{
|
|
const struct chan_info *chan_0 = &dram->chan[0];
|
|
const struct chan_info *chan_1 = &dram->chan[1];
|
|
|
|
u32 *denali_ctl_0 = chan_0->pctl->denali_ctl;
|
|
u32 *denali_phy_0 = chan_0->publ->denali_phy;
|
|
u32 *ddrc0_con_0 = get_ddrc0_con(dram, 0);
|
|
u32 *denali_ctl_1 = chan_1->pctl->denali_ctl;
|
|
u32 *denali_phy_1 = chan_1->publ->denali_phy;
|
|
u32 *ddrc1_con_0 = get_ddrc0_con(dram, 1);
|
|
u32 count = 0;
|
|
u32 byte, tmp;
|
|
|
|
/* PHY_DLL_RST_EN */
|
|
if (channel_mask & 1) {
|
|
writel(0x01000000, &ddrc0_con_0);
|
|
clrsetbits_le32(&denali_phy_0[957], 0x3 << 24, 0x2 << 24);
|
|
}
|
|
|
|
if (channel_mask & 1) {
|
|
count = 0;
|
|
while (!(readl(&denali_ctl_0[203]) & (1 << 3))) {
|
|
if (count > 1000) {
|
|
printf("%s: Failed to init pctl channel 0\n",
|
|
__func__);
|
|
while (1)
|
|
;
|
|
}
|
|
udelay(1);
|
|
count++;
|
|
}
|
|
|
|
writel(0x01000100, &ddrc0_con_0);
|
|
for (byte = 0; byte < 4; byte++) {
|
|
tmp = 0x820;
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_0[53 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_0[54 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_0[55 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_0[56 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_0[57 + (128 * byte)]);
|
|
clrsetbits_le32(&denali_phy_0[58 + (128 * byte)],
|
|
0xffff, tmp);
|
|
}
|
|
clrsetbits_le32(&denali_ctl_0[68], PWRUP_SREFRESH_EXIT,
|
|
dram->pwrup_srefresh_exit[0]);
|
|
}
|
|
|
|
if (channel_mask & 2) {
|
|
writel(0x01000000, &ddrc1_con_0);
|
|
clrsetbits_le32(&denali_phy_1[957], 0x3 << 24, 0x2 << 24);
|
|
}
|
|
if (channel_mask & 2) {
|
|
count = 0;
|
|
while (!(readl(&denali_ctl_1[203]) & (1 << 3))) {
|
|
if (count > 1000) {
|
|
printf("%s: Failed to init pctl channel 1\n",
|
|
__func__);
|
|
while (1)
|
|
;
|
|
}
|
|
udelay(1);
|
|
count++;
|
|
}
|
|
|
|
writel(0x01000100, &ddrc1_con_0);
|
|
for (byte = 0; byte < 4; byte++) {
|
|
tmp = 0x820;
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_1[53 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_1[54 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_1[55 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_1[56 + (128 * byte)]);
|
|
writel((tmp << 16) | tmp,
|
|
&denali_phy_1[57 + (128 * byte)]);
|
|
clrsetbits_le32(&denali_phy_1[58 + (128 * byte)],
|
|
0xffff, tmp);
|
|
}
|
|
|
|
clrsetbits_le32(&denali_ctl_1[68], PWRUP_SREFRESH_EXIT,
|
|
dram->pwrup_srefresh_exit[1]);
|
|
|
|
/*
|
|
* restore channel 1 RESET original setting
|
|
* to avoid 240ohm too weak to prevent ESD test
|
|
*/
|
|
if (params->base.dramtype == LPDDR4)
|
|
clrsetbits_le32(&denali_phy_1[937], 0xff,
|
|
params->phy_regs.denali_phy[937] &
|
|
0xFF);
|
|
}
|
|
}
|
|
|
|
static int pctl_cfg(struct dram_info *dram, const struct chan_info *chan,
|
|
u32 channel, struct rk3399_sdram_params *params)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 *denali_phy = chan->publ->denali_phy;
|
|
const u32 *params_ctl = params->pctl_regs.denali_ctl;
|
|
const u32 *params_phy = params->phy_regs.denali_phy;
|
|
u32 tmp, tmp1, tmp2;
|
|
struct rk3399_sdram_params *params_cfg;
|
|
u32 byte;
|
|
|
|
dram->ops->modify_param(chan, params);
|
|
/*
|
|
* work around controller bug:
|
|
* Do not program DRAM_CLASS until NO_PHY_IND_TRAIN_INT is programmed
|
|
*/
|
|
sdram_copy_to_reg(&denali_ctl[1], ¶ms_ctl[1],
|
|
sizeof(struct rk3399_ddr_pctl_regs) - 4);
|
|
writel(params_ctl[0], &denali_ctl[0]);
|
|
|
|
/*
|
|
* two channel init at the same time, then ZQ Cal Start
|
|
* at the same time, it will use the same RZQ, but cannot
|
|
* start at the same time.
|
|
*
|
|
* So, increase tINIT3 for channel 1, will avoid two
|
|
* channel ZQ Cal Start at the same time
|
|
*/
|
|
if (params->base.dramtype == LPDDR4 && channel == 1) {
|
|
tmp = ((params->base.ddr_freq * MHz + 999) / 1000);
|
|
tmp1 = readl(&denali_ctl[14]);
|
|
writel(tmp + tmp1, &denali_ctl[14]);
|
|
}
|
|
|
|
sdram_copy_to_reg(denali_pi, ¶ms->pi_regs.denali_pi[0],
|
|
sizeof(struct rk3399_ddr_pi_regs));
|
|
|
|
/* rank count need to set for init */
|
|
set_memory_map(chan, channel, params);
|
|
|
|
writel(params->phy_regs.denali_phy[910], &denali_phy[910]);
|
|
writel(params->phy_regs.denali_phy[911], &denali_phy[911]);
|
|
writel(params->phy_regs.denali_phy[912], &denali_phy[912]);
|
|
|
|
if (params->base.dramtype == LPDDR4) {
|
|
writel(params->phy_regs.denali_phy[898], &denali_phy[898]);
|
|
writel(params->phy_regs.denali_phy[919], &denali_phy[919]);
|
|
}
|
|
|
|
dram->pwrup_srefresh_exit[channel] = readl(&denali_ctl[68]) &
|
|
PWRUP_SREFRESH_EXIT;
|
|
clrbits_le32(&denali_ctl[68], PWRUP_SREFRESH_EXIT);
|
|
|
|
/* PHY_DLL_RST_EN */
|
|
clrsetbits_le32(&denali_phy[957], 0x3 << 24, 1 << 24);
|
|
|
|
setbits_le32(&denali_pi[0], START);
|
|
setbits_le32(&denali_ctl[0], START);
|
|
|
|
/**
|
|
* LPDDR4 use PLL bypass mode for init
|
|
* not need to wait for the PLL to lock
|
|
*/
|
|
if (params->base.dramtype != LPDDR4) {
|
|
/* Waiting for phy DLL lock */
|
|
while (1) {
|
|
tmp = readl(&denali_phy[920]);
|
|
tmp1 = readl(&denali_phy[921]);
|
|
tmp2 = readl(&denali_phy[922]);
|
|
if ((((tmp >> 16) & 0x1) == 0x1) &&
|
|
(((tmp1 >> 16) & 0x1) == 0x1) &&
|
|
(((tmp1 >> 0) & 0x1) == 0x1) &&
|
|
(((tmp2 >> 0) & 0x1) == 0x1))
|
|
break;
|
|
}
|
|
}
|
|
|
|
sdram_copy_to_reg(&denali_phy[896], ¶ms_phy[896], (958 - 895) * 4);
|
|
sdram_copy_to_reg(&denali_phy[0], ¶ms_phy[0], (90 - 0 + 1) * 4);
|
|
sdram_copy_to_reg(&denali_phy[128], ¶ms_phy[128],
|
|
(218 - 128 + 1) * 4);
|
|
sdram_copy_to_reg(&denali_phy[256], ¶ms_phy[256],
|
|
(346 - 256 + 1) * 4);
|
|
sdram_copy_to_reg(&denali_phy[384], ¶ms_phy[384],
|
|
(474 - 384 + 1) * 4);
|
|
sdram_copy_to_reg(&denali_phy[512], ¶ms_phy[512],
|
|
(549 - 512 + 1) * 4);
|
|
sdram_copy_to_reg(&denali_phy[640], ¶ms_phy[640],
|
|
(677 - 640 + 1) * 4);
|
|
sdram_copy_to_reg(&denali_phy[768], ¶ms_phy[768],
|
|
(805 - 768 + 1) * 4);
|
|
|
|
if (params->base.dramtype == LPDDR4)
|
|
params_cfg = dram->ops->get_phy_index_params(1, params);
|
|
else
|
|
params_cfg = dram->ops->get_phy_index_params(0, params);
|
|
|
|
clrsetbits_le32(¶ms_cfg->phy_regs.denali_phy[896], 0x3 << 8,
|
|
0 << 8);
|
|
writel(params_cfg->phy_regs.denali_phy[896], &denali_phy[896]);
|
|
|
|
writel(params->phy_regs.denali_phy[83] + (0x10 << 16),
|
|
&denali_phy[83]);
|
|
writel(params->phy_regs.denali_phy[84] + (0x10 << 8),
|
|
&denali_phy[84]);
|
|
writel(params->phy_regs.denali_phy[211] + (0x10 << 16),
|
|
&denali_phy[211]);
|
|
writel(params->phy_regs.denali_phy[212] + (0x10 << 8),
|
|
&denali_phy[212]);
|
|
writel(params->phy_regs.denali_phy[339] + (0x10 << 16),
|
|
&denali_phy[339]);
|
|
writel(params->phy_regs.denali_phy[340] + (0x10 << 8),
|
|
&denali_phy[340]);
|
|
writel(params->phy_regs.denali_phy[467] + (0x10 << 16),
|
|
&denali_phy[467]);
|
|
writel(params->phy_regs.denali_phy[468] + (0x10 << 8),
|
|
&denali_phy[468]);
|
|
|
|
if (params->base.dramtype == LPDDR4) {
|
|
/*
|
|
* to improve write dqs and dq phase from 1.5ns to 3.5ns
|
|
* at 50MHz. this's the measure result from oscilloscope
|
|
* of dqs and dq write signal.
|
|
*/
|
|
for (byte = 0; byte < 4; byte++) {
|
|
tmp = 0x680;
|
|
clrsetbits_le32(&denali_phy[1 + (128 * byte)],
|
|
0xfff << 8, tmp << 8);
|
|
}
|
|
/*
|
|
* to workaround 366ball two channel's RESET connect to
|
|
* one RESET signal of die
|
|
*/
|
|
if (channel == 1)
|
|
clrsetbits_le32(&denali_phy[937], 0xff,
|
|
PHY_DRV_ODT_240 |
|
|
(PHY_DRV_ODT_240 << 0x4));
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void select_per_cs_training_index(const struct chan_info *chan,
|
|
u32 rank)
|
|
{
|
|
u32 *denali_phy = chan->publ->denali_phy;
|
|
|
|
/* PHY_84 PHY_PER_CS_TRAINING_EN_0 1bit offset_16 */
|
|
if ((readl(&denali_phy[84]) >> 16) & 1) {
|
|
/*
|
|
* PHY_8/136/264/392
|
|
* phy_per_cs_training_index_X 1bit offset_24
|
|
*/
|
|
clrsetbits_le32(&denali_phy[8], 0x1 << 24, rank << 24);
|
|
clrsetbits_le32(&denali_phy[136], 0x1 << 24, rank << 24);
|
|
clrsetbits_le32(&denali_phy[264], 0x1 << 24, rank << 24);
|
|
clrsetbits_le32(&denali_phy[392], 0x1 << 24, rank << 24);
|
|
}
|
|
}
|
|
|
|
static void override_write_leveling_value(const struct chan_info *chan)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
u32 *denali_phy = chan->publ->denali_phy;
|
|
u32 byte;
|
|
|
|
/* PHY_896 PHY_FREQ_SEL_MULTICAST_EN 1bit offset_0 */
|
|
setbits_le32(&denali_phy[896], 1);
|
|
|
|
/*
|
|
* PHY_8/136/264/392
|
|
* phy_per_cs_training_multicast_en_X 1bit offset_16
|
|
*/
|
|
clrsetbits_le32(&denali_phy[8], 0x1 << 16, 1 << 16);
|
|
clrsetbits_le32(&denali_phy[136], 0x1 << 16, 1 << 16);
|
|
clrsetbits_le32(&denali_phy[264], 0x1 << 16, 1 << 16);
|
|
clrsetbits_le32(&denali_phy[392], 0x1 << 16, 1 << 16);
|
|
|
|
for (byte = 0; byte < 4; byte++)
|
|
clrsetbits_le32(&denali_phy[63 + (128 * byte)], 0xffff << 16,
|
|
0x200 << 16);
|
|
|
|
/* PHY_896 PHY_FREQ_SEL_MULTICAST_EN 1bit offset_0 */
|
|
clrbits_le32(&denali_phy[896], 1);
|
|
|
|
/* CTL_200 ctrlupd_req 1bit offset_8 */
|
|
clrsetbits_le32(&denali_ctl[200], 0x1 << 8, 0x1 << 8);
|
|
}
|
|
|
|
static int data_training_ca(const struct chan_info *chan, u32 channel,
|
|
const struct rk3399_sdram_params *params)
|
|
{
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 *denali_phy = chan->publ->denali_phy;
|
|
u32 i, tmp;
|
|
u32 obs_0, obs_1, obs_2, obs_err = 0;
|
|
u32 rank = params->ch[channel].cap_info.rank;
|
|
u32 rank_mask;
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
|
|
if (params->base.dramtype == LPDDR4)
|
|
rank_mask = (rank == 1) ? 0x5 : 0xf;
|
|
else
|
|
rank_mask = (rank == 1) ? 0x1 : 0x3;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if (!(rank_mask & (1 << i)))
|
|
continue;
|
|
|
|
select_per_cs_training_index(chan, i);
|
|
|
|
/* PI_100 PI_CALVL_EN:RW:8:2 */
|
|
clrsetbits_le32(&denali_pi[100], 0x3 << 8, 0x2 << 8);
|
|
|
|
/* PI_92 PI_CALVL_REQ:WR:16:1,PI_CALVL_CS:RW:24:2 */
|
|
clrsetbits_le32(&denali_pi[92],
|
|
(0x1 << 16) | (0x3 << 24),
|
|
(0x1 << 16) | (i << 24));
|
|
|
|
/* Waiting for training complete */
|
|
while (1) {
|
|
/* PI_174 PI_INT_STATUS:RD:8:18 */
|
|
tmp = readl(&denali_pi[174]) >> 8;
|
|
/*
|
|
* check status obs
|
|
* PHY_532/660/789 phy_adr_calvl_obs1_:0:32
|
|
*/
|
|
obs_0 = readl(&denali_phy[532]);
|
|
obs_1 = readl(&denali_phy[660]);
|
|
obs_2 = readl(&denali_phy[788]);
|
|
if (((obs_0 >> 30) & 0x3) ||
|
|
((obs_1 >> 30) & 0x3) ||
|
|
((obs_2 >> 30) & 0x3))
|
|
obs_err = 1;
|
|
if ((((tmp >> 11) & 0x1) == 0x1) &&
|
|
(((tmp >> 13) & 0x1) == 0x1) &&
|
|
(((tmp >> 5) & 0x1) == 0x0) &&
|
|
obs_err == 0)
|
|
break;
|
|
else if ((((tmp >> 5) & 0x1) == 0x1) ||
|
|
(obs_err == 1))
|
|
return -EIO;
|
|
}
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
}
|
|
|
|
clrbits_le32(&denali_pi[100], 0x3 << 8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int data_training_wl(const struct chan_info *chan, u32 channel,
|
|
const struct rk3399_sdram_params *params)
|
|
{
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 *denali_phy = chan->publ->denali_phy;
|
|
u32 i, tmp;
|
|
u32 obs_0, obs_1, obs_2, obs_3, obs_err = 0;
|
|
u32 rank = params->ch[channel].cap_info.rank;
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
|
|
for (i = 0; i < rank; i++) {
|
|
select_per_cs_training_index(chan, i);
|
|
|
|
/* PI_60 PI_WRLVL_EN:RW:8:2 */
|
|
clrsetbits_le32(&denali_pi[60], 0x3 << 8, 0x2 << 8);
|
|
|
|
/* PI_59 PI_WRLVL_REQ:WR:8:1,PI_WRLVL_CS:RW:16:2 */
|
|
clrsetbits_le32(&denali_pi[59],
|
|
(0x1 << 8) | (0x3 << 16),
|
|
(0x1 << 8) | (i << 16));
|
|
|
|
/* Waiting for training complete */
|
|
while (1) {
|
|
/* PI_174 PI_INT_STATUS:RD:8:18 */
|
|
tmp = readl(&denali_pi[174]) >> 8;
|
|
|
|
/*
|
|
* check status obs, if error maybe can not
|
|
* get leveling done PHY_40/168/296/424
|
|
* phy_wrlvl_status_obs_X:0:13
|
|
*/
|
|
obs_0 = readl(&denali_phy[40]);
|
|
obs_1 = readl(&denali_phy[168]);
|
|
obs_2 = readl(&denali_phy[296]);
|
|
obs_3 = readl(&denali_phy[424]);
|
|
if (((obs_0 >> 12) & 0x1) ||
|
|
((obs_1 >> 12) & 0x1) ||
|
|
((obs_2 >> 12) & 0x1) ||
|
|
((obs_3 >> 12) & 0x1))
|
|
obs_err = 1;
|
|
if ((((tmp >> 10) & 0x1) == 0x1) &&
|
|
(((tmp >> 13) & 0x1) == 0x1) &&
|
|
(((tmp >> 4) & 0x1) == 0x0) &&
|
|
obs_err == 0)
|
|
break;
|
|
else if ((((tmp >> 4) & 0x1) == 0x1) ||
|
|
(obs_err == 1))
|
|
return -EIO;
|
|
}
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
}
|
|
|
|
override_write_leveling_value(chan);
|
|
clrbits_le32(&denali_pi[60], 0x3 << 8);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int data_training_rg(const struct chan_info *chan, u32 channel,
|
|
const struct rk3399_sdram_params *params)
|
|
{
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 *denali_phy = chan->publ->denali_phy;
|
|
u32 i, tmp;
|
|
u32 obs_0, obs_1, obs_2, obs_3, obs_err = 0;
|
|
u32 rank = params->ch[channel].cap_info.rank;
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
|
|
for (i = 0; i < rank; i++) {
|
|
select_per_cs_training_index(chan, i);
|
|
|
|
/* PI_80 PI_RDLVL_GATE_EN:RW:24:2 */
|
|
clrsetbits_le32(&denali_pi[80], 0x3 << 24, 0x2 << 24);
|
|
|
|
/*
|
|
* PI_74 PI_RDLVL_GATE_REQ:WR:16:1
|
|
* PI_RDLVL_CS:RW:24:2
|
|
*/
|
|
clrsetbits_le32(&denali_pi[74],
|
|
(0x1 << 16) | (0x3 << 24),
|
|
(0x1 << 16) | (i << 24));
|
|
|
|
/* Waiting for training complete */
|
|
while (1) {
|
|
/* PI_174 PI_INT_STATUS:RD:8:18 */
|
|
tmp = readl(&denali_pi[174]) >> 8;
|
|
|
|
/*
|
|
* check status obs
|
|
* PHY_43/171/299/427
|
|
* PHY_GTLVL_STATUS_OBS_x:16:8
|
|
*/
|
|
obs_0 = readl(&denali_phy[43]);
|
|
obs_1 = readl(&denali_phy[171]);
|
|
obs_2 = readl(&denali_phy[299]);
|
|
obs_3 = readl(&denali_phy[427]);
|
|
if (((obs_0 >> (16 + 6)) & 0x3) ||
|
|
((obs_1 >> (16 + 6)) & 0x3) ||
|
|
((obs_2 >> (16 + 6)) & 0x3) ||
|
|
((obs_3 >> (16 + 6)) & 0x3))
|
|
obs_err = 1;
|
|
if ((((tmp >> 9) & 0x1) == 0x1) &&
|
|
(((tmp >> 13) & 0x1) == 0x1) &&
|
|
(((tmp >> 3) & 0x1) == 0x0) &&
|
|
obs_err == 0)
|
|
break;
|
|
else if ((((tmp >> 3) & 0x1) == 0x1) ||
|
|
(obs_err == 1))
|
|
return -EIO;
|
|
}
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
}
|
|
|
|
clrbits_le32(&denali_pi[80], 0x3 << 24);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int data_training_rl(const struct chan_info *chan, u32 channel,
|
|
const struct rk3399_sdram_params *params)
|
|
{
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 i, tmp;
|
|
u32 rank = params->ch[channel].cap_info.rank;
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
|
|
for (i = 0; i < rank; i++) {
|
|
select_per_cs_training_index(chan, i);
|
|
|
|
/* PI_80 PI_RDLVL_EN:RW:16:2 */
|
|
clrsetbits_le32(&denali_pi[80], 0x3 << 16, 0x2 << 16);
|
|
|
|
/* PI_74 PI_RDLVL_REQ:WR:8:1,PI_RDLVL_CS:RW:24:2 */
|
|
clrsetbits_le32(&denali_pi[74],
|
|
(0x1 << 8) | (0x3 << 24),
|
|
(0x1 << 8) | (i << 24));
|
|
|
|
/* Waiting for training complete */
|
|
while (1) {
|
|
/* PI_174 PI_INT_STATUS:RD:8:18 */
|
|
tmp = readl(&denali_pi[174]) >> 8;
|
|
|
|
/*
|
|
* make sure status obs not report error bit
|
|
* PHY_46/174/302/430
|
|
* phy_rdlvl_status_obs_X:16:8
|
|
*/
|
|
if ((((tmp >> 8) & 0x1) == 0x1) &&
|
|
(((tmp >> 13) & 0x1) == 0x1) &&
|
|
(((tmp >> 2) & 0x1) == 0x0))
|
|
break;
|
|
else if (((tmp >> 2) & 0x1) == 0x1)
|
|
return -EIO;
|
|
}
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
}
|
|
|
|
clrbits_le32(&denali_pi[80], 0x3 << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int data_training_wdql(const struct chan_info *chan, u32 channel,
|
|
const struct rk3399_sdram_params *params)
|
|
{
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 i, tmp;
|
|
u32 rank = params->ch[channel].cap_info.rank;
|
|
u32 rank_mask;
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
|
|
if (params->base.dramtype == LPDDR4)
|
|
rank_mask = (rank == 1) ? 0x5 : 0xf;
|
|
else
|
|
rank_mask = (rank == 1) ? 0x1 : 0x3;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if (!(rank_mask & (1 << i)))
|
|
continue;
|
|
|
|
select_per_cs_training_index(chan, i);
|
|
|
|
/*
|
|
* disable PI_WDQLVL_VREF_EN before wdq leveling?
|
|
* PI_117 PI_WDQLVL_VREF_EN:RW:8:1
|
|
*/
|
|
clrbits_le32(&denali_pi[117], 0x1 << 8);
|
|
/* PI_124 PI_WDQLVL_EN:RW:16:2 */
|
|
clrsetbits_le32(&denali_pi[124], 0x3 << 16, 0x2 << 16);
|
|
|
|
/* PI_121 PI_WDQLVL_REQ:WR:8:1,PI_WDQLVL_CS:RW:16:2 */
|
|
clrsetbits_le32(&denali_pi[121],
|
|
(0x1 << 8) | (0x3 << 16),
|
|
(0x1 << 8) | (i << 16));
|
|
|
|
/* Waiting for training complete */
|
|
while (1) {
|
|
/* PI_174 PI_INT_STATUS:RD:8:18 */
|
|
tmp = readl(&denali_pi[174]) >> 8;
|
|
if ((((tmp >> 12) & 0x1) == 0x1) &&
|
|
(((tmp >> 13) & 0x1) == 0x1) &&
|
|
(((tmp >> 6) & 0x1) == 0x0))
|
|
break;
|
|
else if (((tmp >> 6) & 0x1) == 0x1)
|
|
return -EIO;
|
|
}
|
|
|
|
/* clear interrupt,PI_175 PI_INT_ACK:WR:0:17 */
|
|
writel(0x00003f7c, (&denali_pi[175]));
|
|
}
|
|
|
|
clrbits_le32(&denali_pi[124], 0x3 << 16);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int data_training(struct dram_info *dram, u32 channel,
|
|
const struct rk3399_sdram_params *params,
|
|
u32 training_flag)
|
|
{
|
|
struct chan_info *chan = &dram->chan[channel];
|
|
u32 *denali_phy = chan->publ->denali_phy;
|
|
int ret;
|
|
|
|
/* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */
|
|
setbits_le32(&denali_phy[927], (1 << 22));
|
|
|
|
if (training_flag == PI_FULL_TRAINING) {
|
|
if (params->base.dramtype == LPDDR4) {
|
|
training_flag = PI_WRITE_LEVELING |
|
|
PI_READ_GATE_TRAINING |
|
|
PI_READ_LEVELING | PI_WDQ_LEVELING;
|
|
} else if (params->base.dramtype == LPDDR3) {
|
|
training_flag = PI_CA_TRAINING | PI_WRITE_LEVELING |
|
|
PI_READ_GATE_TRAINING;
|
|
} else if (params->base.dramtype == DDR3) {
|
|
training_flag = PI_WRITE_LEVELING |
|
|
PI_READ_GATE_TRAINING |
|
|
PI_READ_LEVELING;
|
|
}
|
|
}
|
|
|
|
/* ca training(LPDDR4,LPDDR3 support) */
|
|
if ((training_flag & PI_CA_TRAINING) == PI_CA_TRAINING) {
|
|
ret = data_training_ca(chan, channel, params);
|
|
if (ret < 0) {
|
|
debug("%s: data training ca failed\n", __func__);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* write leveling(LPDDR4,LPDDR3,DDR3 support) */
|
|
if ((training_flag & PI_WRITE_LEVELING) == PI_WRITE_LEVELING) {
|
|
ret = data_training_wl(chan, channel, params);
|
|
if (ret < 0) {
|
|
debug("%s: data training wl failed\n", __func__);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* read gate training(LPDDR4,LPDDR3,DDR3 support) */
|
|
if ((training_flag & PI_READ_GATE_TRAINING) == PI_READ_GATE_TRAINING) {
|
|
ret = data_training_rg(chan, channel, params);
|
|
if (ret < 0) {
|
|
debug("%s: data training rg failed\n", __func__);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* read leveling(LPDDR4,LPDDR3,DDR3 support) */
|
|
if ((training_flag & PI_READ_LEVELING) == PI_READ_LEVELING) {
|
|
ret = data_training_rl(chan, channel, params);
|
|
if (ret < 0) {
|
|
debug("%s: data training rl failed\n", __func__);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* wdq leveling(LPDDR4 support) */
|
|
if ((training_flag & PI_WDQ_LEVELING) == PI_WDQ_LEVELING) {
|
|
ret = data_training_wdql(chan, channel, params);
|
|
if (ret < 0) {
|
|
debug("%s: data training wdql failed\n", __func__);
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
/* PHY_927 PHY_PAD_DQS_DRIVE RPULL offset_22 */
|
|
clrbits_le32(&denali_phy[927], (1 << 22));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void set_ddrconfig(const struct chan_info *chan,
|
|
const struct rk3399_sdram_params *params,
|
|
unsigned char channel, u32 ddrconfig)
|
|
{
|
|
/* only need to set ddrconfig */
|
|
struct msch_regs *ddr_msch_regs = chan->msch;
|
|
unsigned int cs0_cap = 0;
|
|
unsigned int cs1_cap = 0;
|
|
|
|
cs0_cap = (1 << (params->ch[channel].cap_info.cs0_row
|
|
+ params->ch[channel].cap_info.col
|
|
+ params->ch[channel].cap_info.bk
|
|
+ params->ch[channel].cap_info.bw - 20));
|
|
if (params->ch[channel].cap_info.rank > 1)
|
|
cs1_cap = cs0_cap >> (params->ch[channel].cap_info.cs0_row
|
|
- params->ch[channel].cap_info.cs1_row);
|
|
if (params->ch[channel].cap_info.row_3_4) {
|
|
cs0_cap = cs0_cap * 3 / 4;
|
|
cs1_cap = cs1_cap * 3 / 4;
|
|
}
|
|
|
|
writel(ddrconfig | (ddrconfig << 8), &ddr_msch_regs->ddrconf);
|
|
writel(((cs0_cap / 32) & 0xff) | (((cs1_cap / 32) & 0xff) << 8),
|
|
&ddr_msch_regs->ddrsize);
|
|
}
|
|
|
|
static void sdram_msch_config(struct msch_regs *msch,
|
|
struct sdram_msch_timings *noc_timings)
|
|
{
|
|
writel(noc_timings->ddrtiminga0.d32,
|
|
&msch->ddrtiminga0.d32);
|
|
writel(noc_timings->ddrtimingb0.d32,
|
|
&msch->ddrtimingb0.d32);
|
|
writel(noc_timings->ddrtimingc0.d32,
|
|
&msch->ddrtimingc0.d32);
|
|
writel(noc_timings->devtodev0.d32,
|
|
&msch->devtodev0.d32);
|
|
writel(noc_timings->ddrmode.d32,
|
|
&msch->ddrmode.d32);
|
|
}
|
|
|
|
static void dram_all_config(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
u32 sys_reg2 = 0;
|
|
u32 sys_reg3 = 0;
|
|
unsigned int channel, idx;
|
|
|
|
for (channel = 0, idx = 0;
|
|
(idx < params->base.num_channels) && (channel < 2);
|
|
channel++) {
|
|
struct msch_regs *ddr_msch_regs;
|
|
struct sdram_msch_timings *noc_timing;
|
|
|
|
if (params->ch[channel].cap_info.col == 0)
|
|
continue;
|
|
idx++;
|
|
sdram_org_config(¶ms->ch[channel].cap_info,
|
|
¶ms->base, &sys_reg2,
|
|
&sys_reg3, channel);
|
|
ddr_msch_regs = dram->chan[channel].msch;
|
|
noc_timing = ¶ms->ch[channel].noc_timings;
|
|
sdram_msch_config(ddr_msch_regs, noc_timing);
|
|
|
|
/**
|
|
* rank 1 memory clock disable (dfi_dram_clk_disable = 1)
|
|
*
|
|
* The hardware for LPDDR4 with
|
|
* - CLK0P/N connect to lower 16-bits
|
|
* - CLK1P/N connect to higher 16-bits
|
|
*
|
|
* dfi dram clk is configured via CLK1P/N, so disabling
|
|
* dfi dram clk will disable the CLK1P/N as well for lpddr4.
|
|
*/
|
|
if (params->ch[channel].cap_info.rank == 1 &&
|
|
params->base.dramtype != LPDDR4)
|
|
setbits_le32(&dram->chan[channel].pctl->denali_ctl[276],
|
|
1 << 17);
|
|
}
|
|
|
|
writel(sys_reg2, &dram->pmugrf->os_reg2);
|
|
writel(sys_reg3, &dram->pmugrf->os_reg3);
|
|
rk_clrsetreg(&dram->pmusgrf->soc_con4, 0x1f << 10,
|
|
params->base.stride << 10);
|
|
|
|
/* reboot hold register set */
|
|
writel(PRESET_SGRF_HOLD(0) | PRESET_GPIO0_HOLD(1) |
|
|
PRESET_GPIO1_HOLD(1),
|
|
&dram->pmucru->pmucru_rstnhold_con[1]);
|
|
clrsetbits_le32(&dram->cru->glb_rst_con, 0x3, 0x3);
|
|
}
|
|
|
|
static void set_cap_relate_config(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params,
|
|
unsigned int channel)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
u32 tmp;
|
|
struct sdram_msch_timings *noc_timing;
|
|
|
|
if (params->base.dramtype == LPDDR3) {
|
|
tmp = (8 << params->ch[channel].cap_info.bw) /
|
|
(8 << params->ch[channel].cap_info.dbw);
|
|
|
|
/**
|
|
* memdata_ratio
|
|
* 1 -> 0, 2 -> 1, 4 -> 2
|
|
*/
|
|
clrsetbits_le32(&denali_ctl[197], 0x7,
|
|
(tmp >> 1));
|
|
clrsetbits_le32(&denali_ctl[198], 0x7 << 8,
|
|
(tmp >> 1) << 8);
|
|
}
|
|
|
|
noc_timing = ¶ms->ch[channel].noc_timings;
|
|
|
|
/*
|
|
* noc timing bw relate timing is 32 bit, and real bw is 16bit
|
|
* actually noc reg is setting at function dram_all_config
|
|
*/
|
|
if (params->ch[channel].cap_info.bw == 16 &&
|
|
noc_timing->ddrmode.b.mwrsize == 2) {
|
|
if (noc_timing->ddrmode.b.burstsize)
|
|
noc_timing->ddrmode.b.burstsize -= 1;
|
|
noc_timing->ddrmode.b.mwrsize -= 1;
|
|
noc_timing->ddrtimingc0.b.burstpenalty *= 2;
|
|
noc_timing->ddrtimingc0.b.wrtomwr *= 2;
|
|
}
|
|
}
|
|
|
|
static u32 calculate_ddrconfig(struct rk3399_sdram_params *params, u32 channel)
|
|
{
|
|
unsigned int cs0_row = params->ch[channel].cap_info.cs0_row;
|
|
unsigned int col = params->ch[channel].cap_info.col;
|
|
unsigned int bw = params->ch[channel].cap_info.bw;
|
|
u16 ddr_cfg_2_rbc[] = {
|
|
/*
|
|
* [6] highest bit col
|
|
* [5:3] max row(14+n)
|
|
* [2] insertion row
|
|
* [1:0] col(9+n),col, data bus 32bit
|
|
*
|
|
* highbitcol, max_row, insertion_row, col
|
|
*/
|
|
((0 << 6) | (2 << 3) | (0 << 2) | 0), /* 0 */
|
|
((0 << 6) | (2 << 3) | (0 << 2) | 1), /* 1 */
|
|
((0 << 6) | (1 << 3) | (0 << 2) | 2), /* 2 */
|
|
((0 << 6) | (0 << 3) | (0 << 2) | 3), /* 3 */
|
|
((0 << 6) | (2 << 3) | (1 << 2) | 1), /* 4 */
|
|
((0 << 6) | (1 << 3) | (1 << 2) | 2), /* 5 */
|
|
((1 << 6) | (0 << 3) | (0 << 2) | 2), /* 6 */
|
|
((1 << 6) | (1 << 3) | (0 << 2) | 2), /* 7 */
|
|
};
|
|
u32 i;
|
|
|
|
col -= (bw == 2) ? 0 : 1;
|
|
col -= 9;
|
|
|
|
for (i = 0; i < 4; i++) {
|
|
if ((col == (ddr_cfg_2_rbc[i] & 0x3)) &&
|
|
(cs0_row <= (((ddr_cfg_2_rbc[i] >> 3) & 0x7) + 14)))
|
|
break;
|
|
}
|
|
|
|
if (i >= 4)
|
|
i = -EINVAL;
|
|
|
|
return i;
|
|
}
|
|
|
|
static void set_ddr_stride(struct rk3399_pmusgrf_regs *pmusgrf, u32 stride)
|
|
{
|
|
rk_clrsetreg(&pmusgrf->soc_con4, 0x1f << 10, stride << 10);
|
|
}
|
|
|
|
#if !defined(CONFIG_RAM_RK3399_LPDDR4)
|
|
static int data_training_first(struct dram_info *dram, u32 channel, u8 rank,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
u8 training_flag = PI_READ_GATE_TRAINING;
|
|
|
|
/*
|
|
* LPDDR3 CA training msut be trigger before
|
|
* other training.
|
|
* DDR3 is not have CA training.
|
|
*/
|
|
|
|
if (params->base.dramtype == LPDDR3)
|
|
training_flag |= PI_CA_TRAINING;
|
|
|
|
return data_training(dram, channel, params, training_flag);
|
|
}
|
|
|
|
static int switch_to_phy_index1(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params,
|
|
u32 unused)
|
|
{
|
|
u32 channel;
|
|
u32 *denali_phy;
|
|
u32 ch_count = params->base.num_channels;
|
|
int ret;
|
|
int i = 0;
|
|
|
|
writel(RK_CLRSETBITS(0x03 << 4 | 1 << 2 | 1,
|
|
1 << 4 | 1 << 2 | 1),
|
|
&dram->cic->cic_ctrl0);
|
|
while (!(readl(&dram->cic->cic_status0) & (1 << 2))) {
|
|
mdelay(10);
|
|
i++;
|
|
if (i > 10) {
|
|
debug("index1 frequency change overtime\n");
|
|
return -ETIME;
|
|
}
|
|
}
|
|
|
|
i = 0;
|
|
writel(RK_CLRSETBITS(1 << 1, 1 << 1), &dram->cic->cic_ctrl0);
|
|
while (!(readl(&dram->cic->cic_status0) & (1 << 0))) {
|
|
mdelay(10);
|
|
i++;
|
|
if (i > 10) {
|
|
debug("index1 frequency done overtime\n");
|
|
return -ETIME;
|
|
}
|
|
}
|
|
|
|
for (channel = 0; channel < ch_count; channel++) {
|
|
denali_phy = dram->chan[channel].publ->denali_phy;
|
|
clrsetbits_le32(&denali_phy[896], (0x3 << 8) | 1, 1 << 8);
|
|
ret = data_training(dram, channel, params, PI_FULL_TRAINING);
|
|
if (ret < 0) {
|
|
debug("index1 training failed\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
struct rk3399_sdram_params
|
|
*get_phy_index_params(u32 phy_fn,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
if (phy_fn == 0)
|
|
return params;
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
void modify_param(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
struct rk3399_sdram_params *params_cfg;
|
|
u32 *denali_pi_params;
|
|
|
|
denali_pi_params = params->pi_regs.denali_pi;
|
|
|
|
/* modify PHY F0/F1/F2 params */
|
|
params_cfg = get_phy_index_params(0, params);
|
|
set_ds_odt(chan, params_cfg, false, 0);
|
|
|
|
clrsetbits_le32(&denali_pi_params[45], 0x1 << 24, 0x1 << 24);
|
|
clrsetbits_le32(&denali_pi_params[61], 0x1 << 24, 0x1 << 24);
|
|
clrsetbits_le32(&denali_pi_params[76], 0x1 << 24, 0x1 << 24);
|
|
clrsetbits_le32(&denali_pi_params[77], 0x1, 0x1);
|
|
}
|
|
#else
|
|
|
|
struct rk3399_sdram_params dfs_cfgs_lpddr4[] = {
|
|
#include "sdram-rk3399-lpddr4-400.inc"
|
|
#include "sdram-rk3399-lpddr4-800.inc"
|
|
};
|
|
|
|
static struct rk3399_sdram_params
|
|
*lpddr4_get_phy_index_params(u32 phy_fn,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
if (phy_fn == 0)
|
|
return params;
|
|
else if (phy_fn == 1)
|
|
return &dfs_cfgs_lpddr4[1];
|
|
else if (phy_fn == 2)
|
|
return &dfs_cfgs_lpddr4[0];
|
|
else
|
|
return NULL;
|
|
}
|
|
|
|
static void *get_denali_pi(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, bool reg)
|
|
{
|
|
return reg ? &chan->pi->denali_pi : ¶ms->pi_regs.denali_pi;
|
|
}
|
|
|
|
static u32 lpddr4_get_phy_fn(struct rk3399_sdram_params *params, u32 ctl_fn)
|
|
{
|
|
u32 lpddr4_phy_fn[] = {1, 0, 0xb};
|
|
|
|
return lpddr4_phy_fn[ctl_fn];
|
|
}
|
|
|
|
static u32 lpddr4_get_ctl_fn(struct rk3399_sdram_params *params, u32 phy_fn)
|
|
{
|
|
u32 lpddr4_ctl_fn[] = {1, 0, 2};
|
|
|
|
return lpddr4_ctl_fn[phy_fn];
|
|
}
|
|
|
|
static u32 get_ddr_stride(struct rk3399_pmusgrf_regs *pmusgrf)
|
|
{
|
|
return ((readl(&pmusgrf->soc_con4) >> 10) & 0x1F);
|
|
}
|
|
|
|
/*
|
|
* read mr_num mode register
|
|
* rank = 1: cs0
|
|
* rank = 2: cs1
|
|
*/
|
|
static int read_mr(struct rk3399_ddr_pctl_regs *ddr_pctl_regs, u32 rank,
|
|
u32 mr_num, u32 *buf)
|
|
{
|
|
s32 timeout = 100;
|
|
|
|
writel(((1 << 16) | (((rank == 2) ? 1 : 0) << 8) | mr_num) << 8,
|
|
&ddr_pctl_regs->denali_ctl[118]);
|
|
|
|
while (0 == (readl(&ddr_pctl_regs->denali_ctl[203]) &
|
|
((1 << 21) | (1 << 12)))) {
|
|
udelay(1);
|
|
|
|
if (timeout <= 0) {
|
|
printf("%s: pctl timeout!\n", __func__);
|
|
return -ETIMEDOUT;
|
|
}
|
|
|
|
timeout--;
|
|
}
|
|
|
|
if (!(readl(&ddr_pctl_regs->denali_ctl[203]) & (1 << 12))) {
|
|
*buf = readl(&ddr_pctl_regs->denali_ctl[119]) & 0xFF;
|
|
} else {
|
|
printf("%s: read mr failed with 0x%x status\n", __func__,
|
|
readl(&ddr_pctl_regs->denali_ctl[17]) & 0x3);
|
|
*buf = 0;
|
|
}
|
|
|
|
setbits_le32(&ddr_pctl_regs->denali_ctl[205], (1 << 21) | (1 << 12));
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpddr4_mr_detect(struct dram_info *dram, u32 channel, u8 rank,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
u64 cs0_cap;
|
|
u32 stride;
|
|
u32 cs = 0, col = 0, bk = 0, bw = 0, row_3_4 = 0;
|
|
u32 cs0_row = 0, cs1_row = 0, ddrconfig = 0;
|
|
u32 mr5, mr12, mr14;
|
|
struct chan_info *chan = &dram->chan[channel];
|
|
struct rk3399_ddr_pctl_regs *ddr_pctl_regs = chan->pctl;
|
|
void __iomem *addr = NULL;
|
|
int ret = 0;
|
|
u32 val;
|
|
|
|
stride = get_ddr_stride(dram->pmusgrf);
|
|
|
|
if (params->ch[channel].cap_info.col == 0) {
|
|
ret = -EPERM;
|
|
goto end;
|
|
}
|
|
|
|
cs = params->ch[channel].cap_info.rank;
|
|
col = params->ch[channel].cap_info.col;
|
|
bk = params->ch[channel].cap_info.bk;
|
|
bw = params->ch[channel].cap_info.bw;
|
|
row_3_4 = params->ch[channel].cap_info.row_3_4;
|
|
cs0_row = params->ch[channel].cap_info.cs0_row;
|
|
cs1_row = params->ch[channel].cap_info.cs1_row;
|
|
ddrconfig = params->ch[channel].cap_info.ddrconfig;
|
|
|
|
/* 2GB */
|
|
params->ch[channel].cap_info.rank = 2;
|
|
params->ch[channel].cap_info.col = 10;
|
|
params->ch[channel].cap_info.bk = 3;
|
|
params->ch[channel].cap_info.bw = 2;
|
|
params->ch[channel].cap_info.row_3_4 = 0;
|
|
params->ch[channel].cap_info.cs0_row = 15;
|
|
params->ch[channel].cap_info.cs1_row = 15;
|
|
params->ch[channel].cap_info.ddrconfig = 1;
|
|
|
|
set_memory_map(chan, channel, params);
|
|
params->ch[channel].cap_info.ddrconfig =
|
|
calculate_ddrconfig(params, channel);
|
|
set_ddrconfig(chan, params, channel,
|
|
params->ch[channel].cap_info.ddrconfig);
|
|
set_cap_relate_config(chan, params, channel);
|
|
|
|
cs0_cap = (1 << (params->ch[channel].cap_info.bw
|
|
+ params->ch[channel].cap_info.col
|
|
+ params->ch[channel].cap_info.bk
|
|
+ params->ch[channel].cap_info.cs0_row));
|
|
|
|
if (params->ch[channel].cap_info.row_3_4)
|
|
cs0_cap = cs0_cap * 3 / 4;
|
|
|
|
if (channel == 0)
|
|
set_ddr_stride(dram->pmusgrf, 0x17);
|
|
else
|
|
set_ddr_stride(dram->pmusgrf, 0x18);
|
|
|
|
/* read and write data to DRAM, avoid be optimized by compiler. */
|
|
if (rank == 1)
|
|
addr = (void __iomem *)0x100;
|
|
else if (rank == 2)
|
|
addr = (void __iomem *)(cs0_cap + 0x100);
|
|
|
|
val = readl(addr);
|
|
writel(val + 1, addr);
|
|
|
|
read_mr(ddr_pctl_regs, rank, 5, &mr5);
|
|
read_mr(ddr_pctl_regs, rank, 12, &mr12);
|
|
read_mr(ddr_pctl_regs, rank, 14, &mr14);
|
|
|
|
if (mr5 == 0 || mr12 != 0x4d || mr14 != 0x4d) {
|
|
ret = -EINVAL;
|
|
goto end;
|
|
}
|
|
end:
|
|
params->ch[channel].cap_info.rank = cs;
|
|
params->ch[channel].cap_info.col = col;
|
|
params->ch[channel].cap_info.bk = bk;
|
|
params->ch[channel].cap_info.bw = bw;
|
|
params->ch[channel].cap_info.row_3_4 = row_3_4;
|
|
params->ch[channel].cap_info.cs0_row = cs0_row;
|
|
params->ch[channel].cap_info.cs1_row = cs1_row;
|
|
params->ch[channel].cap_info.ddrconfig = ddrconfig;
|
|
|
|
set_ddr_stride(dram->pmusgrf, stride);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static void set_lpddr4_dq_odt(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, u32 ctl_fn,
|
|
bool en, bool ctl_phy_reg, u32 mr5)
|
|
{
|
|
u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg);
|
|
u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg);
|
|
struct io_setting *io;
|
|
u32 reg_value;
|
|
|
|
io = lpddr4_get_io_settings(params, mr5);
|
|
if (en)
|
|
reg_value = io->dq_odt;
|
|
else
|
|
reg_value = 0;
|
|
|
|
switch (ctl_fn) {
|
|
case 0:
|
|
clrsetbits_le32(&denali_ctl[139], 0x7 << 24, reg_value << 24);
|
|
clrsetbits_le32(&denali_ctl[153], 0x7 << 24, reg_value << 24);
|
|
|
|
clrsetbits_le32(&denali_pi[132], 0x7 << 0, (reg_value << 0));
|
|
clrsetbits_le32(&denali_pi[139], 0x7 << 16, (reg_value << 16));
|
|
clrsetbits_le32(&denali_pi[147], 0x7 << 0, (reg_value << 0));
|
|
clrsetbits_le32(&denali_pi[154], 0x7 << 16, (reg_value << 16));
|
|
break;
|
|
case 1:
|
|
clrsetbits_le32(&denali_ctl[140], 0x7 << 0, reg_value << 0);
|
|
clrsetbits_le32(&denali_ctl[154], 0x7 << 0, reg_value << 0);
|
|
|
|
clrsetbits_le32(&denali_pi[129], 0x7 << 16, (reg_value << 16));
|
|
clrsetbits_le32(&denali_pi[137], 0x7 << 0, (reg_value << 0));
|
|
clrsetbits_le32(&denali_pi[144], 0x7 << 16, (reg_value << 16));
|
|
clrsetbits_le32(&denali_pi[152], 0x7 << 0, (reg_value << 0));
|
|
break;
|
|
case 2:
|
|
default:
|
|
clrsetbits_le32(&denali_ctl[140], 0x7 << 8, (reg_value << 8));
|
|
clrsetbits_le32(&denali_ctl[154], 0x7 << 8, (reg_value << 8));
|
|
|
|
clrsetbits_le32(&denali_pi[127], 0x7 << 0, (reg_value << 0));
|
|
clrsetbits_le32(&denali_pi[134], 0x7 << 16, (reg_value << 16));
|
|
clrsetbits_le32(&denali_pi[142], 0x7 << 0, (reg_value << 0));
|
|
clrsetbits_le32(&denali_pi[149], 0x7 << 16, (reg_value << 16));
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void set_lpddr4_ca_odt(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, u32 ctl_fn,
|
|
bool en, bool ctl_phy_reg, u32 mr5)
|
|
{
|
|
u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg);
|
|
u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg);
|
|
struct io_setting *io;
|
|
u32 reg_value;
|
|
|
|
io = lpddr4_get_io_settings(params, mr5);
|
|
if (en)
|
|
reg_value = io->ca_odt;
|
|
else
|
|
reg_value = 0;
|
|
|
|
switch (ctl_fn) {
|
|
case 0:
|
|
clrsetbits_le32(&denali_ctl[139], 0x7 << 28, reg_value << 28);
|
|
clrsetbits_le32(&denali_ctl[153], 0x7 << 28, reg_value << 28);
|
|
|
|
clrsetbits_le32(&denali_pi[132], 0x7 << 4, reg_value << 4);
|
|
clrsetbits_le32(&denali_pi[139], 0x7 << 20, reg_value << 20);
|
|
clrsetbits_le32(&denali_pi[147], 0x7 << 4, reg_value << 4);
|
|
clrsetbits_le32(&denali_pi[154], 0x7 << 20, reg_value << 20);
|
|
break;
|
|
case 1:
|
|
clrsetbits_le32(&denali_ctl[140], 0x7 << 4, reg_value << 4);
|
|
clrsetbits_le32(&denali_ctl[154], 0x7 << 4, reg_value << 4);
|
|
|
|
clrsetbits_le32(&denali_pi[129], 0x7 << 20, reg_value << 20);
|
|
clrsetbits_le32(&denali_pi[137], 0x7 << 4, reg_value << 4);
|
|
clrsetbits_le32(&denali_pi[144], 0x7 << 20, reg_value << 20);
|
|
clrsetbits_le32(&denali_pi[152], 0x7 << 4, reg_value << 4);
|
|
break;
|
|
case 2:
|
|
default:
|
|
clrsetbits_le32(&denali_ctl[140], 0x7 << 12, (reg_value << 12));
|
|
clrsetbits_le32(&denali_ctl[154], 0x7 << 12, (reg_value << 12));
|
|
|
|
clrsetbits_le32(&denali_pi[127], 0x7 << 4, reg_value << 4);
|
|
clrsetbits_le32(&denali_pi[134], 0x7 << 20, reg_value << 20);
|
|
clrsetbits_le32(&denali_pi[142], 0x7 << 4, reg_value << 4);
|
|
clrsetbits_le32(&denali_pi[149], 0x7 << 20, reg_value << 20);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void set_lpddr4_MR3(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, u32 ctl_fn,
|
|
bool ctl_phy_reg, u32 mr5)
|
|
{
|
|
u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg);
|
|
u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg);
|
|
struct io_setting *io;
|
|
u32 reg_value;
|
|
|
|
io = lpddr4_get_io_settings(params, mr5);
|
|
|
|
reg_value = ((io->pdds << 3) | 1);
|
|
|
|
switch (ctl_fn) {
|
|
case 0:
|
|
clrsetbits_le32(&denali_ctl[138], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_ctl[152], 0xFFFF, reg_value);
|
|
|
|
clrsetbits_le32(&denali_pi[131], 0xFFFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[139], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_pi[146], 0xFFFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[154], 0xFFFF, reg_value);
|
|
break;
|
|
case 1:
|
|
clrsetbits_le32(&denali_ctl[138], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
clrsetbits_le32(&denali_ctl[152], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
|
|
clrsetbits_le32(&denali_pi[129], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_pi[136], 0xFFFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[144], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_pi[151], 0xFFFF << 16, reg_value << 16);
|
|
break;
|
|
case 2:
|
|
default:
|
|
clrsetbits_le32(&denali_ctl[139], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_ctl[153], 0xFFFF, reg_value);
|
|
|
|
clrsetbits_le32(&denali_pi[126], 0xFFFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[134], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_pi[141], 0xFFFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[149], 0xFFFF, reg_value);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void set_lpddr4_MR12(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, u32 ctl_fn,
|
|
bool ctl_phy_reg, u32 mr5)
|
|
{
|
|
u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg);
|
|
u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg);
|
|
struct io_setting *io;
|
|
u32 reg_value;
|
|
|
|
io = lpddr4_get_io_settings(params, mr5);
|
|
|
|
reg_value = io->ca_vref;
|
|
|
|
switch (ctl_fn) {
|
|
case 0:
|
|
clrsetbits_le32(&denali_ctl[140], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
clrsetbits_le32(&denali_ctl[154], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
|
|
clrsetbits_le32(&denali_pi[132], 0xFF << 8, reg_value << 8);
|
|
clrsetbits_le32(&denali_pi[139], 0xFF << 24, reg_value << 24);
|
|
clrsetbits_le32(&denali_pi[147], 0xFF << 8, reg_value << 8);
|
|
clrsetbits_le32(&denali_pi[154], 0xFF << 24, reg_value << 24);
|
|
break;
|
|
case 1:
|
|
clrsetbits_le32(&denali_ctl[141], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_ctl[155], 0xFFFF, reg_value);
|
|
|
|
clrsetbits_le32(&denali_pi[129], 0xFF << 24, reg_value << 24);
|
|
clrsetbits_le32(&denali_pi[137], 0xFF << 8, reg_value << 8);
|
|
clrsetbits_le32(&denali_pi[144], 0xFF << 24, reg_value << 24);
|
|
clrsetbits_le32(&denali_pi[152], 0xFF << 8, reg_value << 8);
|
|
break;
|
|
case 2:
|
|
default:
|
|
clrsetbits_le32(&denali_ctl[141], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
clrsetbits_le32(&denali_ctl[155], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
|
|
clrsetbits_le32(&denali_pi[127], 0xFF << 8, reg_value << 8);
|
|
clrsetbits_le32(&denali_pi[134], 0xFF << 24, reg_value << 24);
|
|
clrsetbits_le32(&denali_pi[142], 0xFF << 8, reg_value << 8);
|
|
clrsetbits_le32(&denali_pi[149], 0xFF << 24, reg_value << 24);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void set_lpddr4_MR14(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params, u32 ctl_fn,
|
|
bool ctl_phy_reg, u32 mr5)
|
|
{
|
|
u32 *denali_ctl = get_denali_ctl(chan, params, ctl_phy_reg);
|
|
u32 *denali_pi = get_denali_pi(chan, params, ctl_phy_reg);
|
|
struct io_setting *io;
|
|
u32 reg_value;
|
|
|
|
io = lpddr4_get_io_settings(params, mr5);
|
|
|
|
reg_value = io->dq_vref;
|
|
|
|
switch (ctl_fn) {
|
|
case 0:
|
|
clrsetbits_le32(&denali_ctl[142], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
clrsetbits_le32(&denali_ctl[156], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
|
|
clrsetbits_le32(&denali_pi[132], 0xFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[140], 0xFF << 0, reg_value << 0);
|
|
clrsetbits_le32(&denali_pi[147], 0xFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[155], 0xFF << 0, reg_value << 0);
|
|
break;
|
|
case 1:
|
|
clrsetbits_le32(&denali_ctl[143], 0xFFFF, reg_value);
|
|
clrsetbits_le32(&denali_ctl[157], 0xFFFF, reg_value);
|
|
|
|
clrsetbits_le32(&denali_pi[130], 0xFF << 0, reg_value << 0);
|
|
clrsetbits_le32(&denali_pi[137], 0xFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[145], 0xFF << 0, reg_value << 0);
|
|
clrsetbits_le32(&denali_pi[152], 0xFF << 16, reg_value << 16);
|
|
break;
|
|
case 2:
|
|
default:
|
|
clrsetbits_le32(&denali_ctl[143], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
clrsetbits_le32(&denali_ctl[157], 0xFFFF << 16,
|
|
reg_value << 16);
|
|
|
|
clrsetbits_le32(&denali_pi[127], 0xFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[135], 0xFF << 0, reg_value << 0);
|
|
clrsetbits_le32(&denali_pi[142], 0xFF << 16, reg_value << 16);
|
|
clrsetbits_le32(&denali_pi[150], 0xFF << 0, reg_value << 0);
|
|
break;
|
|
}
|
|
}
|
|
|
|
void lpddr4_modify_param(const struct chan_info *chan,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
struct rk3399_sdram_params *params_cfg;
|
|
u32 *denali_ctl_params;
|
|
u32 *denali_pi_params;
|
|
u32 *denali_phy_params;
|
|
|
|
denali_ctl_params = params->pctl_regs.denali_ctl;
|
|
denali_pi_params = params->pi_regs.denali_pi;
|
|
denali_phy_params = params->phy_regs.denali_phy;
|
|
|
|
set_lpddr4_dq_odt(chan, params, 2, true, false, 0);
|
|
set_lpddr4_ca_odt(chan, params, 2, true, false, 0);
|
|
set_lpddr4_MR3(chan, params, 2, false, 0);
|
|
set_lpddr4_MR12(chan, params, 2, false, 0);
|
|
set_lpddr4_MR14(chan, params, 2, false, 0);
|
|
params_cfg = lpddr4_get_phy_index_params(0, params);
|
|
set_ds_odt(chan, params_cfg, false, 0);
|
|
/* read two cycle preamble */
|
|
clrsetbits_le32(&denali_ctl_params[200], 0x3 << 24, 0x3 << 24);
|
|
clrsetbits_le32(&denali_phy_params[7], 0x3 << 24, 0x3 << 24);
|
|
clrsetbits_le32(&denali_phy_params[135], 0x3 << 24, 0x3 << 24);
|
|
clrsetbits_le32(&denali_phy_params[263], 0x3 << 24, 0x3 << 24);
|
|
clrsetbits_le32(&denali_phy_params[391], 0x3 << 24, 0x3 << 24);
|
|
|
|
/* boot frequency two cycle preamble */
|
|
clrsetbits_le32(&denali_phy_params[2], 0x3 << 16, 0x3 << 16);
|
|
clrsetbits_le32(&denali_phy_params[130], 0x3 << 16, 0x3 << 16);
|
|
clrsetbits_le32(&denali_phy_params[258], 0x3 << 16, 0x3 << 16);
|
|
clrsetbits_le32(&denali_phy_params[386], 0x3 << 16, 0x3 << 16);
|
|
|
|
clrsetbits_le32(&denali_pi_params[45], 0x3 << 8, 0x3 << 8);
|
|
clrsetbits_le32(&denali_pi_params[58], 0x1, 0x1);
|
|
|
|
/*
|
|
* bypass mode need PHY_SLICE_PWR_RDC_DISABLE_x = 1,
|
|
* boot frequency mode use bypass mode
|
|
*/
|
|
setbits_le32(&denali_phy_params[10], 1 << 16);
|
|
setbits_le32(&denali_phy_params[138], 1 << 16);
|
|
setbits_le32(&denali_phy_params[266], 1 << 16);
|
|
setbits_le32(&denali_phy_params[394], 1 << 16);
|
|
|
|
clrsetbits_le32(&denali_pi_params[45], 0x1 << 24, 0x1 << 24);
|
|
clrsetbits_le32(&denali_pi_params[61], 0x1 << 24, 0x1 << 24);
|
|
clrsetbits_le32(&denali_pi_params[76], 0x1 << 24, 0x1 << 24);
|
|
clrsetbits_le32(&denali_pi_params[77], 0x1, 0x1);
|
|
}
|
|
|
|
static void lpddr4_copy_phy(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params, u32 phy_fn,
|
|
struct rk3399_sdram_params *params_cfg,
|
|
u32 channel)
|
|
{
|
|
u32 *denali_ctl, *denali_phy;
|
|
u32 *denali_phy_params;
|
|
u32 speed = 0;
|
|
u32 ctl_fn, mr5;
|
|
|
|
denali_ctl = dram->chan[channel].pctl->denali_ctl;
|
|
denali_phy = dram->chan[channel].publ->denali_phy;
|
|
denali_phy_params = params_cfg->phy_regs.denali_phy;
|
|
|
|
/* switch index */
|
|
clrsetbits_le32(&denali_phy_params[896], 0x3 << 8,
|
|
phy_fn << 8);
|
|
writel(denali_phy_params[896], &denali_phy[896]);
|
|
|
|
/* phy_pll_ctrl_ca, phy_pll_ctrl */
|
|
writel(denali_phy_params[911], &denali_phy[911]);
|
|
|
|
/* phy_low_freq_sel */
|
|
clrsetbits_le32(&denali_phy[913], 0x1,
|
|
denali_phy_params[913] & 0x1);
|
|
|
|
/* phy_grp_slave_delay_x, phy_cslvl_dly_step */
|
|
writel(denali_phy_params[916], &denali_phy[916]);
|
|
writel(denali_phy_params[917], &denali_phy[917]);
|
|
writel(denali_phy_params[918], &denali_phy[918]);
|
|
|
|
/* phy_adrz_sw_wraddr_shift_x */
|
|
writel(denali_phy_params[512], &denali_phy[512]);
|
|
clrsetbits_le32(&denali_phy[513], 0xffff,
|
|
denali_phy_params[513] & 0xffff);
|
|
writel(denali_phy_params[640], &denali_phy[640]);
|
|
clrsetbits_le32(&denali_phy[641], 0xffff,
|
|
denali_phy_params[641] & 0xffff);
|
|
writel(denali_phy_params[768], &denali_phy[768]);
|
|
clrsetbits_le32(&denali_phy[769], 0xffff,
|
|
denali_phy_params[769] & 0xffff);
|
|
|
|
writel(denali_phy_params[544], &denali_phy[544]);
|
|
writel(denali_phy_params[545], &denali_phy[545]);
|
|
writel(denali_phy_params[546], &denali_phy[546]);
|
|
writel(denali_phy_params[547], &denali_phy[547]);
|
|
|
|
writel(denali_phy_params[672], &denali_phy[672]);
|
|
writel(denali_phy_params[673], &denali_phy[673]);
|
|
writel(denali_phy_params[674], &denali_phy[674]);
|
|
writel(denali_phy_params[675], &denali_phy[675]);
|
|
|
|
writel(denali_phy_params[800], &denali_phy[800]);
|
|
writel(denali_phy_params[801], &denali_phy[801]);
|
|
writel(denali_phy_params[802], &denali_phy[802]);
|
|
writel(denali_phy_params[803], &denali_phy[803]);
|
|
|
|
/*
|
|
* phy_adr_master_delay_start_x
|
|
* phy_adr_master_delay_step_x
|
|
* phy_adr_master_delay_wait_x
|
|
*/
|
|
writel(denali_phy_params[548], &denali_phy[548]);
|
|
writel(denali_phy_params[676], &denali_phy[676]);
|
|
writel(denali_phy_params[804], &denali_phy[804]);
|
|
|
|
/* phy_adr_calvl_dly_step_x */
|
|
writel(denali_phy_params[549], &denali_phy[549]);
|
|
writel(denali_phy_params[677], &denali_phy[677]);
|
|
writel(denali_phy_params[805], &denali_phy[805]);
|
|
|
|
/*
|
|
* phy_clk_wrdm_slave_delay_x
|
|
* phy_clk_wrdqz_slave_delay_x
|
|
* phy_clk_wrdqs_slave_delay_x
|
|
*/
|
|
sdram_copy_to_reg((u32 *)&denali_phy[59],
|
|
(u32 *)&denali_phy_params[59], (63 - 58) * 4);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[187],
|
|
(u32 *)&denali_phy_params[187], (191 - 186) * 4);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[315],
|
|
(u32 *)&denali_phy_params[315], (319 - 314) * 4);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[443],
|
|
(u32 *)&denali_phy_params[443], (447 - 442) * 4);
|
|
|
|
/*
|
|
* phy_dqs_tsel_wr_timing_x 8bits denali_phy_84/212/340/468 offset_8
|
|
* dqs_tsel_wr_end[7:4] add half cycle
|
|
* phy_dq_tsel_wr_timing_x 8bits denali_phy_83/211/339/467 offset_8
|
|
* dq_tsel_wr_end[7:4] add half cycle
|
|
*/
|
|
writel(denali_phy_params[83] + (0x10 << 16), &denali_phy[83]);
|
|
writel(denali_phy_params[84] + (0x10 << 8), &denali_phy[84]);
|
|
writel(denali_phy_params[85], &denali_phy[85]);
|
|
|
|
writel(denali_phy_params[211] + (0x10 << 16), &denali_phy[211]);
|
|
writel(denali_phy_params[212] + (0x10 << 8), &denali_phy[212]);
|
|
writel(denali_phy_params[213], &denali_phy[213]);
|
|
|
|
writel(denali_phy_params[339] + (0x10 << 16), &denali_phy[339]);
|
|
writel(denali_phy_params[340] + (0x10 << 8), &denali_phy[340]);
|
|
writel(denali_phy_params[341], &denali_phy[341]);
|
|
|
|
writel(denali_phy_params[467] + (0x10 << 16), &denali_phy[467]);
|
|
writel(denali_phy_params[468] + (0x10 << 8), &denali_phy[468]);
|
|
writel(denali_phy_params[469], &denali_phy[469]);
|
|
|
|
/*
|
|
* phy_gtlvl_resp_wait_cnt_x
|
|
* phy_gtlvl_dly_step_x
|
|
* phy_wrlvl_resp_wait_cnt_x
|
|
* phy_gtlvl_final_step_x
|
|
* phy_gtlvl_back_step_x
|
|
* phy_rdlvl_dly_step_x
|
|
*
|
|
* phy_master_delay_step_x
|
|
* phy_master_delay_wait_x
|
|
* phy_wrlvl_dly_step_x
|
|
* phy_rptr_update_x
|
|
* phy_wdqlvl_dly_step_x
|
|
*/
|
|
writel(denali_phy_params[87], &denali_phy[87]);
|
|
writel(denali_phy_params[88], &denali_phy[88]);
|
|
writel(denali_phy_params[89], &denali_phy[89]);
|
|
writel(denali_phy_params[90], &denali_phy[90]);
|
|
|
|
writel(denali_phy_params[215], &denali_phy[215]);
|
|
writel(denali_phy_params[216], &denali_phy[216]);
|
|
writel(denali_phy_params[217], &denali_phy[217]);
|
|
writel(denali_phy_params[218], &denali_phy[218]);
|
|
|
|
writel(denali_phy_params[343], &denali_phy[343]);
|
|
writel(denali_phy_params[344], &denali_phy[344]);
|
|
writel(denali_phy_params[345], &denali_phy[345]);
|
|
writel(denali_phy_params[346], &denali_phy[346]);
|
|
|
|
writel(denali_phy_params[471], &denali_phy[471]);
|
|
writel(denali_phy_params[472], &denali_phy[472]);
|
|
writel(denali_phy_params[473], &denali_phy[473]);
|
|
writel(denali_phy_params[474], &denali_phy[474]);
|
|
|
|
/*
|
|
* phy_gtlvl_lat_adj_start_x
|
|
* phy_gtlvl_rddqs_slv_dly_start_x
|
|
* phy_rdlvl_rddqs_dq_slv_dly_start_x
|
|
* phy_wdqlvl_dqdm_slv_dly_start_x
|
|
*/
|
|
writel(denali_phy_params[80], &denali_phy[80]);
|
|
writel(denali_phy_params[81], &denali_phy[81]);
|
|
|
|
writel(denali_phy_params[208], &denali_phy[208]);
|
|
writel(denali_phy_params[209], &denali_phy[209]);
|
|
|
|
writel(denali_phy_params[336], &denali_phy[336]);
|
|
writel(denali_phy_params[337], &denali_phy[337]);
|
|
|
|
writel(denali_phy_params[464], &denali_phy[464]);
|
|
writel(denali_phy_params[465], &denali_phy[465]);
|
|
|
|
/*
|
|
* phy_master_delay_start_x
|
|
* phy_sw_master_mode_x
|
|
* phy_rddata_en_tsel_dly_x
|
|
*/
|
|
writel(denali_phy_params[86], &denali_phy[86]);
|
|
writel(denali_phy_params[214], &denali_phy[214]);
|
|
writel(denali_phy_params[342], &denali_phy[342]);
|
|
writel(denali_phy_params[470], &denali_phy[470]);
|
|
|
|
/*
|
|
* phy_rddqz_slave_delay_x
|
|
* phy_rddqs_dqz_fall_slave_delay_x
|
|
* phy_rddqs_dqz_rise_slave_delay_x
|
|
* phy_rddqs_dm_fall_slave_delay_x
|
|
* phy_rddqs_dm_rise_slave_delay_x
|
|
* phy_rddqs_gate_slave_delay_x
|
|
* phy_wrlvl_delay_early_threshold_x
|
|
* phy_write_path_lat_add_x
|
|
* phy_rddqs_latency_adjust_x
|
|
* phy_wrlvl_delay_period_threshold_x
|
|
* phy_wrlvl_early_force_zero_x
|
|
*/
|
|
sdram_copy_to_reg((u32 *)&denali_phy[64],
|
|
(u32 *)&denali_phy_params[64], (67 - 63) * 4);
|
|
clrsetbits_le32(&denali_phy[68], 0xfffffc00,
|
|
denali_phy_params[68] & 0xfffffc00);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[69],
|
|
(u32 *)&denali_phy_params[69], (79 - 68) * 4);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[192],
|
|
(u32 *)&denali_phy_params[192], (195 - 191) * 4);
|
|
clrsetbits_le32(&denali_phy[196], 0xfffffc00,
|
|
denali_phy_params[196] & 0xfffffc00);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[197],
|
|
(u32 *)&denali_phy_params[197], (207 - 196) * 4);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[320],
|
|
(u32 *)&denali_phy_params[320], (323 - 319) * 4);
|
|
clrsetbits_le32(&denali_phy[324], 0xfffffc00,
|
|
denali_phy_params[324] & 0xfffffc00);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[325],
|
|
(u32 *)&denali_phy_params[325], (335 - 324) * 4);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[448],
|
|
(u32 *)&denali_phy_params[448], (451 - 447) * 4);
|
|
clrsetbits_le32(&denali_phy[452], 0xfffffc00,
|
|
denali_phy_params[452] & 0xfffffc00);
|
|
sdram_copy_to_reg((u32 *)&denali_phy[453],
|
|
(u32 *)&denali_phy_params[453], (463 - 452) * 4);
|
|
|
|
/* phy_two_cyc_preamble_x */
|
|
clrsetbits_le32(&denali_phy[7], 0x3 << 24,
|
|
denali_phy_params[7] & (0x3 << 24));
|
|
clrsetbits_le32(&denali_phy[135], 0x3 << 24,
|
|
denali_phy_params[135] & (0x3 << 24));
|
|
clrsetbits_le32(&denali_phy[263], 0x3 << 24,
|
|
denali_phy_params[263] & (0x3 << 24));
|
|
clrsetbits_le32(&denali_phy[391], 0x3 << 24,
|
|
denali_phy_params[391] & (0x3 << 24));
|
|
|
|
/* speed */
|
|
if (params_cfg->base.ddr_freq < 400)
|
|
speed = 0x0;
|
|
else if (params_cfg->base.ddr_freq < 800)
|
|
speed = 0x1;
|
|
else if (params_cfg->base.ddr_freq < 1200)
|
|
speed = 0x2;
|
|
|
|
/* phy_924 phy_pad_fdbk_drive */
|
|
clrsetbits_le32(&denali_phy[924], 0x3 << 21, speed << 21);
|
|
/* phy_926 phy_pad_data_drive */
|
|
clrsetbits_le32(&denali_phy[926], 0x3 << 9, speed << 9);
|
|
/* phy_927 phy_pad_dqs_drive */
|
|
clrsetbits_le32(&denali_phy[927], 0x3 << 9, speed << 9);
|
|
/* phy_928 phy_pad_addr_drive */
|
|
clrsetbits_le32(&denali_phy[928], 0x3 << 17, speed << 17);
|
|
/* phy_929 phy_pad_clk_drive */
|
|
clrsetbits_le32(&denali_phy[929], 0x3 << 17, speed << 17);
|
|
/* phy_935 phy_pad_cke_drive */
|
|
clrsetbits_le32(&denali_phy[935], 0x3 << 17, speed << 17);
|
|
/* phy_937 phy_pad_rst_drive */
|
|
clrsetbits_le32(&denali_phy[937], 0x3 << 17, speed << 17);
|
|
/* phy_939 phy_pad_cs_drive */
|
|
clrsetbits_le32(&denali_phy[939], 0x3 << 17, speed << 17);
|
|
|
|
if (params_cfg->base.dramtype == LPDDR4) {
|
|
read_mr(dram->chan[channel].pctl, 1, 5, &mr5);
|
|
set_ds_odt(&dram->chan[channel], params_cfg, true, mr5);
|
|
|
|
ctl_fn = lpddr4_get_ctl_fn(params_cfg, phy_fn);
|
|
set_lpddr4_dq_odt(&dram->chan[channel], params_cfg,
|
|
ctl_fn, true, true, mr5);
|
|
set_lpddr4_ca_odt(&dram->chan[channel], params_cfg,
|
|
ctl_fn, true, true, mr5);
|
|
set_lpddr4_MR3(&dram->chan[channel], params_cfg,
|
|
ctl_fn, true, mr5);
|
|
set_lpddr4_MR12(&dram->chan[channel], params_cfg,
|
|
ctl_fn, true, mr5);
|
|
set_lpddr4_MR14(&dram->chan[channel], params_cfg,
|
|
ctl_fn, true, mr5);
|
|
|
|
/*
|
|
* if phy_sw_master_mode_x not bypass mode,
|
|
* clear phy_slice_pwr_rdc_disable.
|
|
* note: need use timings, not ddr_publ_regs
|
|
*/
|
|
if (!((denali_phy_params[86] >> 8) & (1 << 2))) {
|
|
clrbits_le32(&denali_phy[10], 1 << 16);
|
|
clrbits_le32(&denali_phy[138], 1 << 16);
|
|
clrbits_le32(&denali_phy[266], 1 << 16);
|
|
clrbits_le32(&denali_phy[394], 1 << 16);
|
|
}
|
|
|
|
/*
|
|
* when PHY_PER_CS_TRAINING_EN=1, W2W_DIFFCS_DLY_Fx can't
|
|
* smaller than 8
|
|
* NOTE: need use timings, not ddr_publ_regs
|
|
*/
|
|
if ((denali_phy_params[84] >> 16) & 1) {
|
|
if (((readl(&denali_ctl[217 + ctl_fn]) >>
|
|
16) & 0x1f) < 8)
|
|
clrsetbits_le32(&denali_ctl[217 + ctl_fn],
|
|
0x1f << 16,
|
|
8 << 16);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void lpddr4_set_phy(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params, u32 phy_fn,
|
|
struct rk3399_sdram_params *params_cfg)
|
|
{
|
|
u32 channel;
|
|
|
|
for (channel = 0; channel < 2; channel++)
|
|
lpddr4_copy_phy(dram, params, phy_fn, params_cfg,
|
|
channel);
|
|
}
|
|
|
|
static int lpddr4_set_ctl(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params,
|
|
u32 fn, u32 hz)
|
|
{
|
|
u32 channel;
|
|
int ret_clk, ret;
|
|
|
|
/* cci idle req stall */
|
|
writel(0x70007, &dram->grf->soc_con0);
|
|
|
|
/* enable all clk */
|
|
setbits_le32(&dram->pmu->pmu_noc_auto_ena, (0x3 << 7));
|
|
|
|
/* idle */
|
|
setbits_le32(&dram->pmu->pmu_bus_idle_req, (0x3 << 18));
|
|
while ((readl(&dram->pmu->pmu_bus_idle_st) & (0x3 << 18))
|
|
!= (0x3 << 18))
|
|
;
|
|
|
|
/* change freq */
|
|
writel((((0x3 << 4) | (1 << 2) | 1) << 16) |
|
|
(fn << 4) | (1 << 2) | 1, &dram->cic->cic_ctrl0);
|
|
while (!(readl(&dram->cic->cic_status0) & (1 << 2)))
|
|
;
|
|
|
|
ret_clk = clk_set_rate(&dram->ddr_clk, hz);
|
|
if (ret_clk < 0) {
|
|
printf("%s clk set failed %d\n", __func__, ret_clk);
|
|
return ret_clk;
|
|
}
|
|
|
|
writel(0x20002, &dram->cic->cic_ctrl0);
|
|
while (!(readl(&dram->cic->cic_status0) & (1 << 0)))
|
|
;
|
|
|
|
/* deidle */
|
|
clrbits_le32(&dram->pmu->pmu_bus_idle_req, (0x3 << 18));
|
|
while (readl(&dram->pmu->pmu_bus_idle_st) & (0x3 << 18))
|
|
;
|
|
|
|
/* clear enable all clk */
|
|
clrbits_le32(&dram->pmu->pmu_noc_auto_ena, (0x3 << 7));
|
|
|
|
/* lpddr4 ctl2 can not do training, all training will fail */
|
|
if (!(params->base.dramtype == LPDDR4 && fn == 2)) {
|
|
for (channel = 0; channel < 2; channel++) {
|
|
if (!(params->ch[channel].cap_info.col))
|
|
continue;
|
|
ret = data_training(dram, channel, params,
|
|
PI_FULL_TRAINING);
|
|
if (ret)
|
|
printf("%s: channel %d training failed!\n",
|
|
__func__, channel);
|
|
else
|
|
debug("%s: channel %d training pass\n",
|
|
__func__, channel);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int lpddr4_set_rate(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params,
|
|
u32 ctl_fn)
|
|
{
|
|
u32 phy_fn;
|
|
|
|
phy_fn = lpddr4_get_phy_fn(params, ctl_fn);
|
|
|
|
lpddr4_set_phy(dram, params, phy_fn, &dfs_cfgs_lpddr4[ctl_fn]);
|
|
lpddr4_set_ctl(dram, params, ctl_fn,
|
|
dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq);
|
|
|
|
if (IS_ENABLED(CONFIG_RAM_ROCKCHIP_DEBUG))
|
|
printf("%s: change freq to %dMHz %d, %d\n", __func__,
|
|
dfs_cfgs_lpddr4[ctl_fn].base.ddr_freq / MHz,
|
|
ctl_fn, phy_fn);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CONFIG_RAM_RK3399_LPDDR4 */
|
|
|
|
/* CS0,n=1
|
|
* CS1,n=2
|
|
* CS0 & CS1, n=3
|
|
* cs0_cap: MB unit
|
|
*/
|
|
static void dram_set_cs(const struct chan_info *chan, u32 cs_map, u32 cs0_cap,
|
|
unsigned char dramtype)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
struct msch_regs *ddr_msch_regs = chan->msch;
|
|
|
|
clrsetbits_le32(&denali_ctl[196], 0x3, cs_map);
|
|
writel((cs0_cap / 32) | (((4096 - cs0_cap) / 32) << 8),
|
|
&ddr_msch_regs->ddrsize);
|
|
if (dramtype == LPDDR4) {
|
|
if (cs_map == 1)
|
|
cs_map = 0x5;
|
|
else if (cs_map == 2)
|
|
cs_map = 0xa;
|
|
else
|
|
cs_map = 0xF;
|
|
}
|
|
/*PI_41 PI_CS_MAP:RW:24:4*/
|
|
clrsetbits_le32(&denali_pi[41],
|
|
0xf << 24, cs_map << 24);
|
|
if (cs_map == 1 && dramtype == DDR3)
|
|
writel(0x2EC7FFFF, &denali_pi[34]);
|
|
}
|
|
|
|
static void dram_set_bw(const struct chan_info *chan, u32 bw)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
|
|
if (bw == 2)
|
|
clrbits_le32(&denali_ctl[196], 1 << 16);
|
|
else
|
|
setbits_le32(&denali_ctl[196], 1 << 16);
|
|
}
|
|
|
|
static void dram_set_max_col(const struct chan_info *chan, u32 bw, u32 *pcol)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
struct msch_regs *ddr_msch_regs = chan->msch;
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
u32 ddrconfig;
|
|
|
|
clrbits_le32(&denali_ctl[191], 0xf);
|
|
clrsetbits_le32(&denali_ctl[190],
|
|
(7 << 24),
|
|
((16 - ((bw == 2) ? 14 : 15)) << 24));
|
|
/*PI_199 PI_COL_DIFF:RW:0:4*/
|
|
clrbits_le32(&denali_pi[199], 0xf);
|
|
/*PI_155 PI_ROW_DIFF:RW:24:3*/
|
|
clrsetbits_le32(&denali_pi[155],
|
|
(7 << 24),
|
|
((16 - 12) << 24));
|
|
ddrconfig = (bw == 2) ? 3 : 2;
|
|
writel(ddrconfig | (ddrconfig << 8), &ddr_msch_regs->ddrconf);
|
|
/* set max cs0 size */
|
|
writel((4096 / 32) | ((0 / 32) << 8),
|
|
&ddr_msch_regs->ddrsize);
|
|
|
|
*pcol = 12;
|
|
}
|
|
|
|
static void dram_set_max_bank(const struct chan_info *chan, u32 bw, u32 *pbank,
|
|
u32 *pcol)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
|
|
clrbits_le32(&denali_ctl[191], 0xf);
|
|
clrbits_le32(&denali_ctl[190], (3 << 16));
|
|
/*PI_199 PI_COL_DIFF:RW:0:4*/
|
|
clrbits_le32(&denali_pi[199], 0xf);
|
|
/*PI_155 PI_BANK_DIFF:RW:16:2*/
|
|
clrbits_le32(&denali_pi[155], (3 << 16));
|
|
|
|
*pbank = 3;
|
|
*pcol = 12;
|
|
}
|
|
|
|
static void dram_set_max_row(const struct chan_info *chan, u32 bw, u32 *prow,
|
|
u32 *pbank, u32 *pcol)
|
|
{
|
|
u32 *denali_ctl = chan->pctl->denali_ctl;
|
|
u32 *denali_pi = chan->pi->denali_pi;
|
|
struct msch_regs *ddr_msch_regs = chan->msch;
|
|
|
|
clrsetbits_le32(&denali_ctl[191], 0xf, 12 - 10);
|
|
clrbits_le32(&denali_ctl[190],
|
|
(0x3 << 16) | (0x7 << 24));
|
|
/*PI_199 PI_COL_DIFF:RW:0:4*/
|
|
clrsetbits_le32(&denali_pi[199], 0xf, 12 - 10);
|
|
/*PI_155 PI_ROW_DIFF:RW:24:3 PI_BANK_DIFF:RW:16:2*/
|
|
clrbits_le32(&denali_pi[155],
|
|
(0x3 << 16) | (0x7 << 24));
|
|
writel(1 | (1 << 8), &ddr_msch_regs->ddrconf);
|
|
/* set max cs0 size */
|
|
writel((4096 / 32) | ((0 / 32) << 8),
|
|
&ddr_msch_regs->ddrsize);
|
|
|
|
*prow = 16;
|
|
*pbank = 3;
|
|
*pcol = (bw == 2) ? 10 : 11;
|
|
}
|
|
|
|
static u64 dram_detect_cap(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params,
|
|
unsigned char channel)
|
|
{
|
|
const struct chan_info *chan = &dram->chan[channel];
|
|
struct sdram_cap_info *cap_info = ¶ms->ch[channel].cap_info;
|
|
u32 bw;
|
|
u32 col_tmp;
|
|
u32 bk_tmp;
|
|
u32 row_tmp;
|
|
u32 cs0_cap;
|
|
u32 training_flag;
|
|
u32 ddrconfig;
|
|
|
|
/* detect bw */
|
|
bw = 2;
|
|
if (params->base.dramtype != LPDDR4) {
|
|
dram_set_bw(chan, bw);
|
|
cap_info->bw = bw;
|
|
if (data_training(dram, channel, params,
|
|
PI_READ_GATE_TRAINING)) {
|
|
bw = 1;
|
|
dram_set_bw(chan, 1);
|
|
cap_info->bw = bw;
|
|
if (data_training(dram, channel, params,
|
|
PI_READ_GATE_TRAINING)) {
|
|
printf("16bit error!!!\n");
|
|
goto error;
|
|
}
|
|
}
|
|
}
|
|
/*
|
|
* LPDDR3 CA training msut be trigger before other training.
|
|
* DDR3 is not have CA training.
|
|
*/
|
|
if (params->base.dramtype == LPDDR3)
|
|
training_flag = PI_WRITE_LEVELING;
|
|
else
|
|
training_flag = PI_FULL_TRAINING;
|
|
|
|
if (params->base.dramtype != LPDDR4) {
|
|
if (data_training(dram, channel, params, training_flag)) {
|
|
printf("full training error!!!\n");
|
|
goto error;
|
|
}
|
|
}
|
|
|
|
/* detect col */
|
|
dram_set_max_col(chan, bw, &col_tmp);
|
|
if (sdram_detect_col(cap_info, col_tmp) != 0)
|
|
goto error;
|
|
|
|
/* detect bank */
|
|
dram_set_max_bank(chan, bw, &bk_tmp, &col_tmp);
|
|
sdram_detect_bank(cap_info, col_tmp, bk_tmp);
|
|
|
|
/* detect row */
|
|
dram_set_max_row(chan, bw, &row_tmp, &bk_tmp, &col_tmp);
|
|
if (sdram_detect_row(cap_info, col_tmp, bk_tmp, row_tmp) != 0)
|
|
goto error;
|
|
|
|
/* detect row_3_4 */
|
|
sdram_detect_row_3_4(cap_info, col_tmp, bk_tmp);
|
|
|
|
/* set ddrconfig */
|
|
cs0_cap = (1 << (cap_info->cs0_row + cap_info->col + cap_info->bk +
|
|
cap_info->bw - 20));
|
|
if (cap_info->row_3_4)
|
|
cs0_cap = cs0_cap * 3 / 4;
|
|
|
|
cap_info->cs1_row = cap_info->cs0_row;
|
|
set_memory_map(chan, channel, params);
|
|
ddrconfig = calculate_ddrconfig(params, channel);
|
|
if (-1 == ddrconfig)
|
|
goto error;
|
|
set_ddrconfig(chan, params, channel,
|
|
cap_info->ddrconfig);
|
|
|
|
/* detect cs1 row */
|
|
sdram_detect_cs1_row(cap_info, params->base.dramtype);
|
|
|
|
/* detect die bw */
|
|
sdram_detect_dbw(cap_info, params->base.dramtype);
|
|
|
|
return 0;
|
|
error:
|
|
return (-1);
|
|
}
|
|
|
|
static unsigned char calculate_stride(struct rk3399_sdram_params *params)
|
|
{
|
|
unsigned int gstride_type;
|
|
unsigned int channel;
|
|
unsigned int chinfo = 0;
|
|
unsigned int cap = 0;
|
|
unsigned int stride = -1;
|
|
unsigned int ch_cap[2] = {0, 0};
|
|
|
|
gstride_type = STRIDE_256B;
|
|
|
|
for (channel = 0; channel < 2; channel++) {
|
|
unsigned int cs0_cap = 0;
|
|
unsigned int cs1_cap = 0;
|
|
struct sdram_cap_info *cap_info =
|
|
¶ms->ch[channel].cap_info;
|
|
|
|
if (cap_info->col == 0)
|
|
continue;
|
|
|
|
cs0_cap = (1 << (cap_info->cs0_row + cap_info->col +
|
|
cap_info->bk + cap_info->bw - 20));
|
|
if (cap_info->rank > 1)
|
|
cs1_cap = cs0_cap >> (cap_info->cs0_row
|
|
- cap_info->cs1_row);
|
|
if (cap_info->row_3_4) {
|
|
cs0_cap = cs0_cap * 3 / 4;
|
|
cs1_cap = cs1_cap * 3 / 4;
|
|
}
|
|
ch_cap[channel] = cs0_cap + cs1_cap;
|
|
chinfo |= 1 << channel;
|
|
}
|
|
|
|
cap = ch_cap[0] + ch_cap[1];
|
|
if (params->base.num_channels == 1) {
|
|
if (chinfo & 1) /* channel a only */
|
|
stride = 0x17;
|
|
else /* channel b only */
|
|
stride = 0x18;
|
|
} else {/* 2 channel */
|
|
if (ch_cap[0] == ch_cap[1]) {
|
|
/* interleaved */
|
|
if (gstride_type == PART_STRIDE) {
|
|
/*
|
|
* first 64MB no interleaved other 256B interleaved
|
|
* if 786M+768M.useful space from 0-1280MB and
|
|
* 1536MB-1792MB
|
|
* if 1.5G+1.5G(continuous).useful space from 0-2560MB
|
|
* and 3072MB-3584MB
|
|
*/
|
|
stride = 0x1F;
|
|
} else {
|
|
switch (cap) {
|
|
/* 512MB */
|
|
case 512:
|
|
stride = 0;
|
|
break;
|
|
/* 1GB unstride or 256B stride*/
|
|
case 1024:
|
|
stride = (gstride_type == UN_STRIDE) ?
|
|
0x1 : 0x5;
|
|
break;
|
|
/*
|
|
* 768MB + 768MB same as total 2GB memory
|
|
* useful space: 0-768MB 1GB-1792MB
|
|
*/
|
|
case 1536:
|
|
/* 2GB unstride or 256B or 512B stride */
|
|
case 2048:
|
|
stride = (gstride_type == UN_STRIDE) ?
|
|
0x2 :
|
|
((gstride_type == STRIDE_512B) ?
|
|
0xA : 0x9);
|
|
break;
|
|
/* 1536MB + 1536MB */
|
|
case 3072:
|
|
stride = (gstride_type == UN_STRIDE) ?
|
|
0x3 :
|
|
((gstride_type == STRIDE_512B) ?
|
|
0x12 : 0x11);
|
|
break;
|
|
/* 4GB unstride or 128B,256B,512B,4KB stride */
|
|
case 4096:
|
|
stride = (gstride_type == UN_STRIDE) ?
|
|
0x3 : (0xC + gstride_type);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
if (ch_cap[0] == 2048 && ch_cap[1] == 1024) {
|
|
/* 2GB + 1GB */
|
|
stride = (gstride_type == UN_STRIDE) ? 0x3 : 0x19;
|
|
}
|
|
/*
|
|
* remain two channel capability not equal OR capability
|
|
* power function of 2
|
|
*/
|
|
if (stride == (-1)) {
|
|
switch ((ch_cap[0] > ch_cap[1]) ?
|
|
ch_cap[0] : ch_cap[1]) {
|
|
case 256: /* 256MB + 128MB */
|
|
stride = 0;
|
|
break;
|
|
case 512: /* 512MB + 256MB */
|
|
stride = 1;
|
|
break;
|
|
case 1024:/* 1GB + 128MB/256MB/384MB/512MB/768MB */
|
|
stride = 2;
|
|
break;
|
|
case 2048: /* 2GB + 128MB/256MB/384MB/512MB/768MB/1GB */
|
|
stride = 3;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
if (stride == (-1))
|
|
goto error;
|
|
}
|
|
|
|
sdram_print_stride(stride);
|
|
|
|
return stride;
|
|
error:
|
|
printf("Cap not support!\n");
|
|
return (-1);
|
|
}
|
|
|
|
static void clear_channel_params(struct rk3399_sdram_params *params, u8 channel)
|
|
{
|
|
params->ch[channel].cap_info.rank = 0;
|
|
params->ch[channel].cap_info.col = 0;
|
|
params->ch[channel].cap_info.bk = 0;
|
|
params->ch[channel].cap_info.bw = 32;
|
|
params->ch[channel].cap_info.dbw = 32;
|
|
params->ch[channel].cap_info.row_3_4 = 0;
|
|
params->ch[channel].cap_info.cs0_row = 0;
|
|
params->ch[channel].cap_info.cs1_row = 0;
|
|
params->ch[channel].cap_info.ddrconfig = 0;
|
|
}
|
|
|
|
static int sdram_init(struct dram_info *dram,
|
|
struct rk3399_sdram_params *params)
|
|
{
|
|
unsigned char dramtype = params->base.dramtype;
|
|
unsigned int ddr_freq = params->base.ddr_freq;
|
|
int channel, ch, rank;
|
|
u32 tmp, ret;
|
|
|
|
debug("Starting SDRAM initialization...\n");
|
|
|
|
if ((dramtype == DDR3 && ddr_freq > 933) ||
|
|
(dramtype == LPDDR3 && ddr_freq > 933) ||
|
|
(dramtype == LPDDR4 && ddr_freq > 800)) {
|
|
debug("SDRAM frequency is to high!");
|
|
return -E2BIG;
|
|
}
|
|
|
|
/* detect rank */
|
|
for (ch = 0; ch < 2; ch++) {
|
|
params->ch[ch].cap_info.rank = 2;
|
|
for (rank = 2; rank != 0; rank--) {
|
|
for (channel = 0; channel < 2; channel++) {
|
|
const struct chan_info *chan =
|
|
&dram->chan[channel];
|
|
struct rockchip_cru *cru = dram->cru;
|
|
struct rk3399_ddr_publ_regs *publ = chan->publ;
|
|
|
|
phy_pctrl_reset(cru, channel);
|
|
phy_dll_bypass_set(publ, ddr_freq);
|
|
pctl_cfg(dram, chan, channel, params);
|
|
}
|
|
|
|
/* start to trigger initialization */
|
|
pctl_start(dram, params, 3);
|
|
|
|
/* LPDDR2/LPDDR3 need to wait DAI complete, max 10us */
|
|
if (dramtype == LPDDR3)
|
|
udelay(10);
|
|
|
|
tmp = (rank == 2) ? 3 : 1;
|
|
dram_set_cs(&dram->chan[ch], tmp, 2048,
|
|
params->base.dramtype);
|
|
params->ch[ch].cap_info.rank = rank;
|
|
|
|
ret = dram->ops->data_training_first(dram, ch,
|
|
rank, params);
|
|
if (!ret) {
|
|
debug("%s: data trained for rank %d, ch %d\n",
|
|
__func__, rank, ch);
|
|
break;
|
|
}
|
|
}
|
|
/* Computed rank with associated channel number */
|
|
params->ch[ch].cap_info.rank = rank;
|
|
}
|
|
|
|
#if defined(CONFIG_RAM_RK3399_LPDDR4)
|
|
/* LPDDR4 needs to be trained at 400MHz */
|
|
lpddr4_set_rate(dram, params, 0);
|
|
params->base.ddr_freq = dfs_cfgs_lpddr4[0].base.ddr_freq / MHz;
|
|
#endif
|
|
|
|
params->base.num_channels = 0;
|
|
for (channel = 0; channel < 2; channel++) {
|
|
const struct chan_info *chan = &dram->chan[channel];
|
|
struct sdram_cap_info *cap_info =
|
|
¶ms->ch[channel].cap_info;
|
|
|
|
if (cap_info->rank == 0) {
|
|
clear_channel_params(params, 1);
|
|
continue;
|
|
}
|
|
|
|
if (IS_ENABLED(CONFIG_RAM_ROCKCHIP_DEBUG)) {
|
|
printf("Channel ");
|
|
printf(channel ? "1: " : "0: ");
|
|
}
|
|
|
|
if (channel == 0)
|
|
set_ddr_stride(dram->pmusgrf, 0x17);
|
|
else
|
|
set_ddr_stride(dram->pmusgrf, 0x18);
|
|
|
|
if (dram_detect_cap(dram, params, channel)) {
|
|
printf("Cap error!\n");
|
|
continue;
|
|
}
|
|
|
|
sdram_print_ddr_info(cap_info, ¶ms->base);
|
|
set_memory_map(chan, channel, params);
|
|
cap_info->ddrconfig =
|
|
calculate_ddrconfig(params, channel);
|
|
if (-1 == cap_info->ddrconfig) {
|
|
printf("no ddrconfig find, Cap not support!\n");
|
|
continue;
|
|
}
|
|
|
|
params->base.num_channels++;
|
|
set_ddrconfig(chan, params, channel, cap_info->ddrconfig);
|
|
set_cap_relate_config(chan, params, channel);
|
|
}
|
|
|
|
if (params->base.num_channels == 0) {
|
|
printf("%s: ", __func__);
|
|
sdram_print_dram_type(params->base.dramtype);
|
|
printf(" - %dMHz failed!\n", params->base.ddr_freq);
|
|
return -EINVAL;
|
|
}
|
|
|
|
params->base.stride = calculate_stride(params);
|
|
dram_all_config(dram, params);
|
|
|
|
ret = dram->ops->set_rate_index(dram, params, 1);
|
|
if (ret)
|
|
return ret;
|
|
|
|
debug("Finish SDRAM initialization...\n");
|
|
return 0;
|
|
}
|
|
|
|
static int rk3399_dmc_of_to_plat(struct udevice *dev)
|
|
{
|
|
struct rockchip_dmc_plat *plat = dev_get_plat(dev);
|
|
int ret;
|
|
|
|
if (!CONFIG_IS_ENABLED(OF_REAL))
|
|
return 0;
|
|
|
|
ret = dev_read_u32_array(dev, "rockchip,sdram-params",
|
|
(u32 *)&plat->sdram_params,
|
|
sizeof(plat->sdram_params) / sizeof(u32));
|
|
if (ret) {
|
|
printf("%s: Cannot read rockchip,sdram-params %d\n",
|
|
__func__, ret);
|
|
return ret;
|
|
}
|
|
ret = regmap_init_mem(dev_ofnode(dev), &plat->map);
|
|
if (ret)
|
|
printf("%s: regmap failed %d\n", __func__, ret);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
static int conv_of_plat(struct udevice *dev)
|
|
{
|
|
struct rockchip_dmc_plat *plat = dev_get_plat(dev);
|
|
struct dtd_rockchip_rk3399_dmc *dtplat = &plat->dtplat;
|
|
int ret;
|
|
|
|
ret = regmap_init_mem_plat(dev, dtplat->reg,
|
|
ARRAY_SIZE(dtplat->reg) / 2, &plat->map);
|
|
if (ret)
|
|
return ret;
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct sdram_rk3399_ops rk3399_ops = {
|
|
#if !defined(CONFIG_RAM_RK3399_LPDDR4)
|
|
.data_training_first = data_training_first,
|
|
.set_rate_index = switch_to_phy_index1,
|
|
.modify_param = modify_param,
|
|
.get_phy_index_params = get_phy_index_params,
|
|
#else
|
|
.data_training_first = lpddr4_mr_detect,
|
|
.set_rate_index = lpddr4_set_rate,
|
|
.modify_param = lpddr4_modify_param,
|
|
.get_phy_index_params = lpddr4_get_phy_index_params,
|
|
#endif
|
|
};
|
|
|
|
static int rk3399_dmc_init(struct udevice *dev)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
struct rockchip_dmc_plat *plat = dev_get_plat(dev);
|
|
int ret;
|
|
#if CONFIG_IS_ENABLED(OF_REAL)
|
|
struct rk3399_sdram_params *params = &plat->sdram_params;
|
|
#else
|
|
struct dtd_rockchip_rk3399_dmc *dtplat = &plat->dtplat;
|
|
struct rk3399_sdram_params *params =
|
|
(void *)dtplat->rockchip_sdram_params;
|
|
|
|
ret = conv_of_plat(dev);
|
|
if (ret)
|
|
return ret;
|
|
#endif
|
|
|
|
priv->ops = &rk3399_ops;
|
|
priv->cic = syscon_get_first_range(ROCKCHIP_SYSCON_CIC);
|
|
priv->grf = syscon_get_first_range(ROCKCHIP_SYSCON_GRF);
|
|
priv->pmu = syscon_get_first_range(ROCKCHIP_SYSCON_PMU);
|
|
priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
|
|
priv->pmusgrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUSGRF);
|
|
priv->pmucru = rockchip_get_pmucru();
|
|
priv->cru = rockchip_get_cru();
|
|
priv->chan[0].pctl = regmap_get_range(plat->map, 0);
|
|
priv->chan[0].pi = regmap_get_range(plat->map, 1);
|
|
priv->chan[0].publ = regmap_get_range(plat->map, 2);
|
|
priv->chan[0].msch = regmap_get_range(plat->map, 3);
|
|
priv->chan[1].pctl = regmap_get_range(plat->map, 4);
|
|
priv->chan[1].pi = regmap_get_range(plat->map, 5);
|
|
priv->chan[1].publ = regmap_get_range(plat->map, 6);
|
|
priv->chan[1].msch = regmap_get_range(plat->map, 7);
|
|
|
|
debug("con reg %p %p %p %p %p %p %p %p\n",
|
|
priv->chan[0].pctl, priv->chan[0].pi,
|
|
priv->chan[0].publ, priv->chan[0].msch,
|
|
priv->chan[1].pctl, priv->chan[1].pi,
|
|
priv->chan[1].publ, priv->chan[1].msch);
|
|
debug("cru %p, cic %p, grf %p, sgrf %p, pmucru %p, pmu %p\n", priv->cru,
|
|
priv->cic, priv->pmugrf, priv->pmusgrf, priv->pmucru, priv->pmu);
|
|
|
|
#if CONFIG_IS_ENABLED(OF_PLATDATA)
|
|
ret = clk_get_by_phandle(dev, dtplat->clocks, &priv->ddr_clk);
|
|
#else
|
|
ret = clk_get_by_index(dev, 0, &priv->ddr_clk);
|
|
#endif
|
|
if (ret) {
|
|
printf("%s clk get failed %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_set_rate(&priv->ddr_clk, params->base.ddr_freq * MHz);
|
|
if (ret < 0) {
|
|
printf("%s clk set failed %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = sdram_init(priv, params);
|
|
if (ret < 0) {
|
|
printf("%s DRAM init failed %d\n", __func__, ret);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static int rk3399_dmc_probe(struct udevice *dev)
|
|
{
|
|
#if defined(CONFIG_TPL_BUILD) || \
|
|
(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
|
|
if (rk3399_dmc_init(dev))
|
|
return 0;
|
|
#else
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
priv->pmugrf = syscon_get_first_range(ROCKCHIP_SYSCON_PMUGRF);
|
|
debug("%s: pmugrf = %p\n", __func__, priv->pmugrf);
|
|
priv->info.base = CONFIG_SYS_SDRAM_BASE;
|
|
priv->info.size =
|
|
rockchip_sdram_size((phys_addr_t)&priv->pmugrf->os_reg2);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
static int rk3399_dmc_get_info(struct udevice *dev, struct ram_info *info)
|
|
{
|
|
struct dram_info *priv = dev_get_priv(dev);
|
|
|
|
*info = priv->info;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct ram_ops rk3399_dmc_ops = {
|
|
.get_info = rk3399_dmc_get_info,
|
|
};
|
|
|
|
static const struct udevice_id rk3399_dmc_ids[] = {
|
|
{ .compatible = "rockchip,rk3399-dmc" },
|
|
{ }
|
|
};
|
|
|
|
U_BOOT_DRIVER(dmc_rk3399) = {
|
|
.name = "rockchip_rk3399_dmc",
|
|
.id = UCLASS_RAM,
|
|
.of_match = rk3399_dmc_ids,
|
|
.ops = &rk3399_dmc_ops,
|
|
#if defined(CONFIG_TPL_BUILD) || \
|
|
(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
|
|
.of_to_plat = rk3399_dmc_of_to_plat,
|
|
#endif
|
|
.probe = rk3399_dmc_probe,
|
|
.priv_auto = sizeof(struct dram_info),
|
|
#if defined(CONFIG_TPL_BUILD) || \
|
|
(!defined(CONFIG_TPL) && defined(CONFIG_SPL_BUILD))
|
|
.plat_auto = sizeof(struct rockchip_dmc_plat),
|
|
#endif
|
|
};
|