u-boot/arch/arm/mach-uniphier/ph1-ld4/sbc_init_3cs.c
Masahiro Yamada f6e7f07c17 ARM: UniPhier: replace <asm/io.h> with <linux/io.h>
In the Linux coding style, it is recommended to include <linux/io.h>
rather than <asm/io.h>.  Follow this trend.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
2015-05-31 02:53:56 +09:00

49 lines
1.3 KiB
C

/*
* Copyright (C) 2011-2015 Masahiro Yamada <yamada.masahiro@socionext.com>
*
* SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <linux/io.h>
#include <mach/sbc-regs.h>
#include <mach/sg-regs.h>
void sbc_init(void)
{
u32 tmp;
/* system bus output enable */
tmp = readl(PC0CTRL);
tmp &= 0xfffffcff;
writel(tmp, PC0CTRL);
/* XECS1: sub/boot memory (boot swap = off/on) */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL10);
writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL11);
writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL12);
writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL14);
/* XECS0: boot/sub memory (boot swap = off/on) */
writel(SBCTRL0_SAVEPIN_MEM_VALUE, SBCTRL00);
writel(SBCTRL1_SAVEPIN_MEM_VALUE, SBCTRL01);
writel(SBCTRL2_SAVEPIN_MEM_VALUE, SBCTRL02);
writel(SBCTRL4_SAVEPIN_MEM_VALUE, SBCTRL04);
/* XECS3: peripherals */
writel(SBCTRL0_SAVEPIN_PERI_VALUE, SBCTRL30);
writel(SBCTRL1_SAVEPIN_PERI_VALUE, SBCTRL31);
writel(SBCTRL2_SAVEPIN_PERI_VALUE, SBCTRL32);
writel(SBCTRL4_SAVEPIN_PERI_VALUE, SBCTRL34);
/* base address regsiters */
writel(0x0000bc01, SBBASE0);
writel(0x0400bc01, SBBASE1);
writel(0x0800bf01, SBBASE3);
/* enable access to sub memory when boot swap is on */
if (boot_is_swapped())
sg_set_pinsel(155, 1); /* PORT24 -> XECS0 */
sg_set_pinsel(156, 1); /* PORT25 -> XECS3 */
}