mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-16 01:38:22 +00:00
3ceb5118c6
As said in 29.5.7 section of SAMA5D2 datasheet, before switching to the crystal oscillator, a check must be carried out to ensure that the oscillator is present and that its freqency is valid. Signed-off-by: Wenyou Yang <wenyou.yang@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
263 lines
11 KiB
C
263 lines
11 KiB
C
/*
|
|
* [origin: Linux kernel arch/arm/mach-at91/include/mach/at91_pmc.h]
|
|
*
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) SAN People
|
|
* Copyright (C) 2009 Jens Scharsig (js_at_ng@scharsoft.de)
|
|
*
|
|
* Power Management Controller (PMC) - System peripherals registers.
|
|
* Based on AT91RM9200 datasheet revision E.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef AT91_PMC_H
|
|
#define AT91_PMC_H
|
|
|
|
#ifdef __ASSEMBLY__
|
|
|
|
#define AT91_ASM_PMC_MOR (ATMEL_BASE_PMC + 0x20)
|
|
#define AT91_ASM_PMC_PLLAR (ATMEL_BASE_PMC + 0x28)
|
|
#define AT91_ASM_PMC_PLLBR (ATMEL_BASE_PMC + 0x2c)
|
|
#define AT91_ASM_PMC_MCKR (ATMEL_BASE_PMC + 0x30)
|
|
#define AT91_ASM_PMC_SR (ATMEL_BASE_PMC + 0x68)
|
|
|
|
#else
|
|
|
|
#include <asm/types.h>
|
|
|
|
typedef struct at91_pmc {
|
|
u32 scer; /* 0x00 System Clock Enable Register */
|
|
u32 scdr; /* 0x04 System Clock Disable Register */
|
|
u32 scsr; /* 0x08 System Clock Status Register */
|
|
u32 reserved0;
|
|
u32 pcer; /* 0x10 Peripheral Clock Enable Register */
|
|
u32 pcdr; /* 0x14 Peripheral Clock Disable Register */
|
|
u32 pcsr; /* 0x18 Peripheral Clock Status Register */
|
|
u32 uckr; /* 0x1C UTMI Clock Register */
|
|
u32 mor; /* 0x20 Main Oscilator Register */
|
|
u32 mcfr; /* 0x24 Main Clock Frequency Register */
|
|
u32 pllar; /* 0x28 PLL A Register */
|
|
u32 pllbr; /* 0x2C PLL B Register */
|
|
u32 mckr; /* 0x30 Master Clock Register */
|
|
u32 reserved1;
|
|
u32 usb; /* 0x38 USB Clock Register */
|
|
u32 reserved2;
|
|
u32 pck[4]; /* 0x40 Programmable Clock Register 0 - 3 */
|
|
u32 reserved3[4];
|
|
u32 ier; /* 0x60 Interrupt Enable Register */
|
|
u32 idr; /* 0x64 Interrupt Disable Register */
|
|
u32 sr; /* 0x68 Status Register */
|
|
u32 imr; /* 0x6C Interrupt Mask Register */
|
|
u32 reserved4[4];
|
|
u32 pllicpr; /* 0x80 Change Pump Current Register (SAM9) */
|
|
u32 reserved5[24];
|
|
u32 wpmr; /* 0xE4 Write Protect Mode Register (CAP0) */
|
|
u32 wpsr; /* 0xE8 Write Protect Status Register (CAP0) */
|
|
u32 reserved6[5];
|
|
u32 pcer1; /* 0x100 Periperial Clock Enable Register 1 */
|
|
u32 pcdr1; /* 0x104 Periperial Clock Disable Register 1 */
|
|
u32 pcsr1; /* 0x108 Periperial Clock Status Register 1 */
|
|
u32 pcr; /* 0x10c Periperial Control Register */
|
|
u32 ocr; /* 0x110 Oscillator Calibration Register */
|
|
} at91_pmc_t;
|
|
|
|
#endif /* end not assembly */
|
|
|
|
#define AT91_PMC_MOR_MOSCEN 0x01
|
|
#define AT91_PMC_MOR_OSCBYPASS 0x02
|
|
#define AT91_PMC_MOR_MOSCRCEN 0x08
|
|
#define AT91_PMC_MOR_OSCOUNT(x) (((x) & 0xff) << 8)
|
|
#define AT91_PMC_MOR_KEY(x) (((x) & 0xff) << 16)
|
|
#define AT91_PMC_MOR_MOSCSEL (1 << 24)
|
|
|
|
#define AT91_PMC_PLLXR_DIV(x) ((x) & 0xFF)
|
|
#define AT91_PMC_PLLXR_PLLCOUNT(x) (((x) & 0x3F) << 8)
|
|
#define AT91_PMC_PLLXR_OUT(x) (((x) & 0x03) << 14)
|
|
#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
|
|
defined(CONFIG_SAMA5D4)
|
|
#define AT91_PMC_PLLXR_MUL(x) (((x) & 0x7F) << 18)
|
|
#else
|
|
#define AT91_PMC_PLLXR_MUL(x) (((x) & 0x7FF) << 16)
|
|
#endif
|
|
#define AT91_PMC_PLLAR_29 0x20000000
|
|
#define AT91_PMC_PLLBR_USBDIV_1 0x00000000
|
|
#define AT91_PMC_PLLBR_USBDIV_2 0x10000000
|
|
#define AT91_PMC_PLLBR_USBDIV_4 0x20000000
|
|
|
|
#define AT91_PMC_MCFR_MAINRDY 0x00010000
|
|
#define AT91_PMC_MCFR_MAINF_MASK 0x0000FFFF
|
|
#define AT91_PMC_MCFR_RCMEAS 0x00100000
|
|
#define AT91_PMC_MCFR_CCSS_XTAL_OSC 0x01000000
|
|
|
|
#define AT91_PMC_MCKR_CSS_SLOW 0x00000000
|
|
#define AT91_PMC_MCKR_CSS_MAIN 0x00000001
|
|
#define AT91_PMC_MCKR_CSS_PLLA 0x00000002
|
|
#define AT91_PMC_MCKR_CSS_PLLB 0x00000003
|
|
#define AT91_PMC_MCKR_CSS_MASK 0x00000003
|
|
|
|
#if defined(CONFIG_SAMA5D2) || defined(CONFIG_SAMA5D3) || \
|
|
defined(CONFIG_SAMA5D4) || \
|
|
defined(CONFIG_AT91SAM9X5) || defined(CONFIG_AT91SAM9N12)
|
|
#define AT91_PMC_MCKR_PRES_1 0x00000000
|
|
#define AT91_PMC_MCKR_PRES_2 0x00000010
|
|
#define AT91_PMC_MCKR_PRES_4 0x00000020
|
|
#define AT91_PMC_MCKR_PRES_8 0x00000030
|
|
#define AT91_PMC_MCKR_PRES_16 0x00000040
|
|
#define AT91_PMC_MCKR_PRES_32 0x00000050
|
|
#define AT91_PMC_MCKR_PRES_64 0x00000060
|
|
#define AT91_PMC_MCKR_PRES_MASK 0x00000070
|
|
#else
|
|
#define AT91_PMC_MCKR_PRES_1 0x00000000
|
|
#define AT91_PMC_MCKR_PRES_2 0x00000004
|
|
#define AT91_PMC_MCKR_PRES_4 0x00000008
|
|
#define AT91_PMC_MCKR_PRES_8 0x0000000C
|
|
#define AT91_PMC_MCKR_PRES_16 0x00000010
|
|
#define AT91_PMC_MCKR_PRES_32 0x00000014
|
|
#define AT91_PMC_MCKR_PRES_64 0x00000018
|
|
#define AT91_PMC_MCKR_PRES_MASK 0x0000001C
|
|
#endif
|
|
|
|
#ifdef CONFIG_AT91RM9200
|
|
#define AT91_PMC_MCKR_MDIV_1 0x00000000
|
|
#define AT91_PMC_MCKR_MDIV_2 0x00000100
|
|
#define AT91_PMC_MCKR_MDIV_3 0x00000200
|
|
#define AT91_PMC_MCKR_MDIV_4 0x00000300
|
|
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
|
|
#else
|
|
#define AT91_PMC_MCKR_MDIV_1 0x00000000
|
|
#define AT91_PMC_MCKR_MDIV_2 0x00000100
|
|
#define AT91_PMC_MCKR_MDIV_3 0x00000300
|
|
#define AT91_PMC_MCKR_MDIV_4 0x00000200
|
|
#define AT91_PMC_MCKR_MDIV_MASK 0x00000300
|
|
#endif
|
|
|
|
#define AT91_PMC_MCKR_PLLADIV_MASK 0x00003000
|
|
#define AT91_PMC_MCKR_PLLADIV_1 0x00000000
|
|
#define AT91_PMC_MCKR_PLLADIV_2 0x00001000
|
|
|
|
#define AT91_PMC_MCKR_H32MXDIV 0x01000000
|
|
|
|
#define AT91_PMC_IXR_MOSCS 0x00000001
|
|
#define AT91_PMC_IXR_LOCKA 0x00000002
|
|
#define AT91_PMC_IXR_LOCKB 0x00000004
|
|
#define AT91_PMC_IXR_MCKRDY 0x00000008
|
|
#define AT91_PMC_IXR_LOCKU 0x00000040
|
|
#define AT91_PMC_IXR_PCKRDY0 0x00000100
|
|
#define AT91_PMC_IXR_PCKRDY1 0x00000200
|
|
#define AT91_PMC_IXR_PCKRDY2 0x00000400
|
|
#define AT91_PMC_IXR_PCKRDY3 0x00000800
|
|
#define AT91_PMC_IXR_MOSCSELS 0x00010000
|
|
|
|
#define AT91_PMC_PCR_PID_MASK (0x3f)
|
|
#define AT91_PMC_PCR_GCKCSS (0x7 << 8)
|
|
#define AT91_PMC_PCR_GCKCSS_MASK 0x07
|
|
#define AT91_PMC_PCR_GCKCSS_OFFSET 8
|
|
#define AT91_PMC_PCR_GCKCSS_(x) ((x & 0x07) << 8)
|
|
#define AT91_PMC_PCR_GCKCSS_SLOW_CLK (0x0 << 8)
|
|
#define AT91_PMC_PCR_GCKCSS_MAIN_CLK (0x1 << 8)
|
|
#define AT91_PMC_PCR_GCKCSS_PLLA_CLK (0x2 << 8)
|
|
#define AT91_PMC_PCR_GCKCSS_UPLL_CLK (0x3 << 8)
|
|
#define AT91_PMC_PCR_GCKCSS_MCK_CLK (0x4 << 8)
|
|
#define AT91_PMC_PCR_GCKCSS_AUDIO_CLK (0x5 << 8)
|
|
#define AT91_PMC_PCR_CMD_WRITE (0x1 << 12)
|
|
#define AT91_PMC_PCR_DIV (0x3 << 16)
|
|
#define AT91_PMC_PCR_GCKDIV (0xff << 20)
|
|
#define AT91_PMC_PCR_GCKDIV_MASK 0xff
|
|
#define AT91_PMC_PCR_GCKDIV_OFFSET 20
|
|
#define AT91_PMC_PCR_GCKDIV_(x) ((x & 0xff) << 20)
|
|
#define AT91_PMC_PCR_EN (0x1 << 28)
|
|
#define AT91_PMC_PCR_GCKEN (0x1 << 29)
|
|
|
|
#define AT91_PMC_PCK (1 << 0) /* Processor Clock */
|
|
#define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */
|
|
#define AT91_PMC_DDR (1 << 2) /* DDR Clock */
|
|
#define AT91RM9200_PMC_MCKUDP (1 << 2) /* USB Device Port Master Clock Automatic Disable on Suspend [AT91RM9200 only] */
|
|
#define AT91RM9200_PMC_UHP (1 << 4) /* USB Host Port Clock [AT91RM9200 only] */
|
|
#define AT91SAM926x_PMC_UHP (1 << 6) /* USB Host Port Clock [AT91SAM926x only] */
|
|
#define AT91SAM926x_PMC_UDP (1 << 7) /* USB Devcice Port Clock [AT91SAM926x only] */
|
|
#define AT91_PMC_PCK0 (1 << 8) /* Programmable Clock 0 */
|
|
#define AT91_PMC_PCK1 (1 << 9) /* Programmable Clock 1 */
|
|
#define AT91_PMC_PCK2 (1 << 10) /* Programmable Clock 2 */
|
|
#define AT91_PMC_PCK3 (1 << 11) /* Programmable Clock 3 */
|
|
#define AT91_PMC_HCK0 (1 << 16) /* AHB Clock (USB host) [AT91SAM9261 only] */
|
|
#define AT91_PMC_HCK1 (1 << 17) /* AHB Clock (LCD) [AT91SAM9261 only] */
|
|
|
|
#define AT91_PMC_UPLLEN (1 << 16) /* UTMI PLL Enable */
|
|
#define AT91_PMC_UPLLCOUNT (0xf << 20) /* UTMI PLL Start-up Time */
|
|
#define AT91_PMC_BIASEN (1 << 24) /* UTMI BIAS Enable */
|
|
#define AT91_PMC_BIASCOUNT (0xf << 28) /* UTMI PLL Start-up Time */
|
|
|
|
#define AT91_PMC_MOSCEN (1 << 0) /* Main Oscillator Enable */
|
|
#define AT91_PMC_OSCBYPASS (1 << 1) /* Oscillator Bypass [SAM9x] */
|
|
#define AT91_PMC_OSCOUNT (0xff << 8) /* Main Oscillator Start-up Time */
|
|
|
|
#define AT91_PMC_MAINF (0xffff << 0) /* Main Clock Frequency */
|
|
#define AT91_PMC_MAINRDY (1 << 16) /* Main Clock Ready */
|
|
|
|
#define AT91_PMC_DIV (0xff << 0) /* Divider */
|
|
#define AT91_PMC_PLLCOUNT (0x3f << 8) /* PLL Counter */
|
|
#define AT91_PMC_OUT (3 << 14) /* PLL Clock Frequency Range */
|
|
#define AT91_PMC_MUL (0x7ff << 16) /* PLL Multiplier */
|
|
#define AT91_PMC_USBDIV (3 << 28) /* USB Divisor (PLLB only) */
|
|
#define AT91_PMC_USBDIV_1 (0 << 28)
|
|
#define AT91_PMC_USBDIV_2 (1 << 28)
|
|
#define AT91_PMC_USBDIV_4 (2 << 28)
|
|
#define AT91_PMC_USB96M (1 << 28) /* Divider by 2 Enable (PLLB only) */
|
|
#define AT91_PMC_PLLA_WR_ERRATA (1 << 29) /* Bit 29 must always be set to 1 when programming the CKGR_PLLAR register */
|
|
|
|
#define AT91_PMC_CSS (3 << 0) /* Master Clock Selection */
|
|
#define AT91_PMC_CSS_SLOW (0 << 0)
|
|
#define AT91_PMC_CSS_MAIN (1 << 0)
|
|
#define AT91_PMC_CSS_PLLA (2 << 0)
|
|
#define AT91_PMC_CSS_PLLB (3 << 0)
|
|
#define AT91_PMC_PRES (7 << 2) /* Master Clock Prescaler */
|
|
#define AT91_PMC_PRES_1 (0 << 2)
|
|
#define AT91_PMC_PRES_2 (1 << 2)
|
|
#define AT91_PMC_PRES_4 (2 << 2)
|
|
#define AT91_PMC_PRES_8 (3 << 2)
|
|
#define AT91_PMC_PRES_16 (4 << 2)
|
|
#define AT91_PMC_PRES_32 (5 << 2)
|
|
#define AT91_PMC_PRES_64 (6 << 2)
|
|
#define AT91_PMC_MDIV (3 << 8) /* Master Clock Division */
|
|
#define AT91RM9200_PMC_MDIV_1 (0 << 8) /* [AT91RM9200 only] */
|
|
#define AT91RM9200_PMC_MDIV_2 (1 << 8)
|
|
#define AT91RM9200_PMC_MDIV_3 (2 << 8)
|
|
#define AT91RM9200_PMC_MDIV_4 (3 << 8)
|
|
#define AT91SAM9_PMC_MDIV_1 (0 << 8) /* [SAM9 only] */
|
|
#define AT91SAM9_PMC_MDIV_2 (1 << 8)
|
|
#define AT91SAM9_PMC_MDIV_4 (2 << 8)
|
|
#define AT91SAM9_PMC_MDIV_3 (3 << 8) /* [some SAM9 only] */
|
|
#define AT91SAM9_PMC_MDIV_6 (3 << 8)
|
|
#define AT91_PMC_PDIV (1 << 12) /* Processor Clock Division [some SAM9 only] */
|
|
#define AT91_PMC_PDIV_1 (0 << 12)
|
|
#define AT91_PMC_PDIV_2 (1 << 12)
|
|
|
|
#define AT91_PMC_USBS_USB_PLLA (0x0) /* USB Clock Input is PLLA */
|
|
#define AT91_PMC_USBS_USB_UPLL (0x1) /* USB Clock Input is UPLL */
|
|
#define AT91_PMC_USBS_USB_PLLB (0x1) /* USB Clock Input is PLLB, AT91SAM9N12 only */
|
|
#define AT91_PMC_USB_DIV_2 (0x1 << 8) /* USB Clock divided by 2 */
|
|
#define AT91_PMC_USBDIV_8 (0x7 << 8) /* USB Clock divided by 8 */
|
|
#define AT91_PMC_USBDIV_10 (0x9 << 8) /* USB Clock divided by 10 */
|
|
|
|
#define AT91_PMC_MOSCS (1 << 0) /* MOSCS Flag */
|
|
#define AT91_PMC_LOCKA (1 << 1) /* PLLA Lock */
|
|
#define AT91_PMC_LOCKB (1 << 2) /* PLLB Lock */
|
|
#define AT91_PMC_MCKRDY (1 << 3) /* Master Clock */
|
|
#define AT91_PMC_LOCKU (1 << 6) /* UPLL Lock */
|
|
#define AT91_PMC_PCK0RDY (1 << 8) /* Programmable Clock 0 */
|
|
#define AT91_PMC_PCK1RDY (1 << 9) /* Programmable Clock 1 */
|
|
#define AT91_PMC_PCK2RDY (1 << 10) /* Programmable Clock 2 */
|
|
#define AT91_PMC_PCK3RDY (1 << 11) /* Programmable Clock 3 */
|
|
#define AT91_PMC_MOSCSELS BIT(16) /* Main Oscillator Selection Status */
|
|
#define AT91_PMC_MOSCRCS BIT(17) /* 12 MHz RC Oscillator Status */
|
|
#define AT91_PMC_GCKRDY (1 << 24)
|
|
#define AT91_PMC_PROTKEY 0x504d4301 /* Activation Code */
|
|
|
|
/* PLL Charge Pump Current Register (PMC_PLLICPR) */
|
|
#define AT91_PMC_ICP_PLLA(x) (((x) & 0x3) << 0)
|
|
#define AT91_PMC_IPLL_PLLA(x) (((x) & 0x7) << 8)
|
|
#define AT91_PMC_ICP_PLLU(x) (((x) & 0x3) << 16)
|
|
#define AT91_PMC_IVCO_PLLU(x) (((x) & 0x3) << 24)
|
|
|
|
#endif
|