mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-20 03:38:43 +00:00
83d290c56f
When U-Boot started using SPDX tags we were among the early adopters and there weren't a lot of other examples to borrow from. So we picked the area of the file that usually had a full license text and replaced it with an appropriate SPDX-License-Identifier: entry. Since then, the Linux Kernel has adopted SPDX tags and they place it as the very first line in a file (except where shebangs are used, then it's second line) and with slightly different comment styles than us. In part due to community overlap, in part due to better tag visibility and in part for other minor reasons, switch over to that style. This commit changes all instances where we have a single declared license in the tag as both the before and after are identical in tag contents. There's also a few places where I found we did not have a tag and have introduced one. Signed-off-by: Tom Rini <trini@konsulko.com>
247 lines
6.2 KiB
C
247 lines
6.2 KiB
C
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* Copyright (C) 2016 Peng Fan <van.freenix@gmail.com>
|
|
*/
|
|
|
|
#include <common.h>
|
|
#include <mapmem.h>
|
|
#include <linux/io.h>
|
|
#include <linux/err.h>
|
|
#include <dm.h>
|
|
#include <dm/pinctrl.h>
|
|
|
|
#include "pinctrl-imx.h"
|
|
|
|
DECLARE_GLOBAL_DATA_PTR;
|
|
|
|
static int imx_pinctrl_set_state(struct udevice *dev, struct udevice *config)
|
|
{
|
|
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
|
|
struct imx_pinctrl_soc_info *info = priv->info;
|
|
int node = dev_of_offset(config);
|
|
const struct fdt_property *prop;
|
|
u32 *pin_data;
|
|
int npins, size, pin_size;
|
|
int mux_reg, conf_reg, input_reg, input_val, mux_mode, config_val;
|
|
u32 mux_shift = info->mux_mask ? ffs(info->mux_mask) - 1 : 0;
|
|
int i, j = 0;
|
|
|
|
dev_dbg(dev, "%s: %s\n", __func__, config->name);
|
|
|
|
if (info->flags & SHARE_MUX_CONF_REG)
|
|
pin_size = SHARE_FSL_PIN_SIZE;
|
|
else
|
|
pin_size = FSL_PIN_SIZE;
|
|
|
|
prop = fdt_getprop(gd->fdt_blob, node, "fsl,pins", &size);
|
|
if (!prop) {
|
|
dev_err(dev, "No fsl,pins property in node %s\n", config->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (!size || size % pin_size) {
|
|
dev_err(dev, "Invalid fsl,pins property in node %s\n",
|
|
config->name);
|
|
return -EINVAL;
|
|
}
|
|
|
|
pin_data = devm_kzalloc(dev, size, 0);
|
|
if (!pin_data)
|
|
return -ENOMEM;
|
|
|
|
if (fdtdec_get_int_array(gd->fdt_blob, node, "fsl,pins",
|
|
pin_data, size >> 2)) {
|
|
dev_err(dev, "Error reading pin data.\n");
|
|
devm_kfree(dev, pin_data);
|
|
return -EINVAL;
|
|
}
|
|
|
|
npins = size / pin_size;
|
|
|
|
/*
|
|
* Refer to linux documentation for details:
|
|
* Documentation/devicetree/bindings/pinctrl/fsl,imx-pinctrl.txt
|
|
*/
|
|
for (i = 0; i < npins; i++) {
|
|
mux_reg = pin_data[j++];
|
|
|
|
if (!(info->flags & ZERO_OFFSET_VALID) && !mux_reg)
|
|
mux_reg = -1;
|
|
|
|
if (info->flags & SHARE_MUX_CONF_REG) {
|
|
conf_reg = mux_reg;
|
|
} else {
|
|
conf_reg = pin_data[j++];
|
|
if (!(info->flags & ZERO_OFFSET_VALID) && !conf_reg)
|
|
conf_reg = -1;
|
|
}
|
|
|
|
if ((mux_reg == -1) || (conf_reg == -1)) {
|
|
dev_err(dev, "Error mux_reg or conf_reg\n");
|
|
devm_kfree(dev, pin_data);
|
|
return -EINVAL;
|
|
}
|
|
|
|
input_reg = pin_data[j++];
|
|
mux_mode = pin_data[j++];
|
|
input_val = pin_data[j++];
|
|
config_val = pin_data[j++];
|
|
|
|
dev_dbg(dev, "mux_reg 0x%x, conf_reg 0x%x, input_reg 0x%x, "
|
|
"mux_mode 0x%x, input_val 0x%x, config_val 0x%x\n",
|
|
mux_reg, conf_reg, input_reg, mux_mode, input_val,
|
|
config_val);
|
|
|
|
if (config_val & IMX_PAD_SION)
|
|
mux_mode |= IOMUXC_CONFIG_SION;
|
|
|
|
config_val &= ~IMX_PAD_SION;
|
|
|
|
/* Set Mux */
|
|
if (info->flags & SHARE_MUX_CONF_REG) {
|
|
clrsetbits_le32(info->base + mux_reg, info->mux_mask,
|
|
mux_mode << mux_shift);
|
|
} else {
|
|
writel(mux_mode, info->base + mux_reg);
|
|
}
|
|
|
|
dev_dbg(dev, "write mux: offset 0x%x val 0x%x\n", mux_reg,
|
|
mux_mode);
|
|
|
|
/*
|
|
* Set select input
|
|
*
|
|
* If the select input value begins with 0xff, it's a quirky
|
|
* select input and the value should be interpreted as below.
|
|
* 31 23 15 7 0
|
|
* | 0xff | shift | width | select |
|
|
* It's used to work around the problem that the select
|
|
* input for some pin is not implemented in the select
|
|
* input register but in some general purpose register.
|
|
* We encode the select input value, width and shift of
|
|
* the bit field into input_val cell of pin function ID
|
|
* in device tree, and then decode them here for setting
|
|
* up the select input bits in general purpose register.
|
|
*/
|
|
|
|
if (input_val >> 24 == 0xff) {
|
|
u32 val = input_val;
|
|
u8 select = val & 0xff;
|
|
u8 width = (val >> 8) & 0xff;
|
|
u8 shift = (val >> 16) & 0xff;
|
|
u32 mask = ((1 << width) - 1) << shift;
|
|
/*
|
|
* The input_reg[i] here is actually some IOMUXC general
|
|
* purpose register, not regular select input register.
|
|
*/
|
|
val = readl(info->base + input_reg);
|
|
val &= ~mask;
|
|
val |= select << shift;
|
|
writel(val, info->base + input_reg);
|
|
} else if (input_reg) {
|
|
/*
|
|
* Regular select input register can never be at offset
|
|
* 0, and we only print register value for regular case.
|
|
*/
|
|
if (info->input_sel_base)
|
|
writel(input_val, info->input_sel_base +
|
|
input_reg);
|
|
else
|
|
writel(input_val, info->base + input_reg);
|
|
|
|
dev_dbg(dev, "select_input: offset 0x%x val 0x%x\n",
|
|
input_reg, input_val);
|
|
}
|
|
|
|
/* Set config */
|
|
if (!(config_val & IMX_NO_PAD_CTL)) {
|
|
if (info->flags & SHARE_MUX_CONF_REG) {
|
|
clrsetbits_le32(info->base + conf_reg,
|
|
~info->mux_mask, config_val);
|
|
} else {
|
|
writel(config_val, info->base + conf_reg);
|
|
}
|
|
|
|
dev_dbg(dev, "write config: offset 0x%x val 0x%x\n",
|
|
conf_reg, config_val);
|
|
}
|
|
}
|
|
|
|
devm_kfree(dev, pin_data);
|
|
|
|
return 0;
|
|
}
|
|
|
|
const struct pinctrl_ops imx_pinctrl_ops = {
|
|
.set_state = imx_pinctrl_set_state,
|
|
};
|
|
|
|
int imx_pinctrl_probe(struct udevice *dev,
|
|
struct imx_pinctrl_soc_info *info)
|
|
{
|
|
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
|
|
int node = dev_of_offset(dev), ret;
|
|
struct fdtdec_phandle_args arg;
|
|
fdt_addr_t addr;
|
|
fdt_size_t size;
|
|
|
|
if (!info) {
|
|
dev_err(dev, "wrong pinctrl info\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
priv->dev = dev;
|
|
priv->info = info;
|
|
|
|
addr = fdtdec_get_addr_size(gd->fdt_blob, dev_of_offset(dev), "reg",
|
|
&size);
|
|
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
info->base = map_sysmem(addr, size);
|
|
if (!info->base)
|
|
return -ENOMEM;
|
|
priv->info = info;
|
|
|
|
info->mux_mask = fdtdec_get_int(gd->fdt_blob, node, "fsl,mux_mask", 0);
|
|
/*
|
|
* Refer to linux documentation for details:
|
|
* Documentation/devicetree/bindings/pinctrl/fsl,imx7d-pinctrl.txt
|
|
*/
|
|
if (fdtdec_get_bool(gd->fdt_blob, node, "fsl,input-sel")) {
|
|
ret = fdtdec_parse_phandle_with_args(gd->fdt_blob,
|
|
node, "fsl,input-sel",
|
|
NULL, 0, 0, &arg);
|
|
if (ret) {
|
|
dev_err(dev, "iomuxc fsl,input-sel property not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
addr = fdtdec_get_addr_size(gd->fdt_blob, arg.node, "reg",
|
|
&size);
|
|
if (addr == FDT_ADDR_T_NONE)
|
|
return -EINVAL;
|
|
|
|
info->input_sel_base = map_sysmem(addr, size);
|
|
if (!info->input_sel_base)
|
|
return -ENOMEM;
|
|
}
|
|
|
|
dev_dbg(dev, "initialized IMX pinctrl driver\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
int imx_pinctrl_remove(struct udevice *dev)
|
|
{
|
|
struct imx_pinctrl_priv *priv = dev_get_priv(dev);
|
|
struct imx_pinctrl_soc_info *info = priv->info;
|
|
|
|
if (info->input_sel_base)
|
|
unmap_sysmem(info->input_sel_base);
|
|
if (info->base)
|
|
unmap_sysmem(info->base);
|
|
|
|
return 0;
|
|
}
|