mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
291000894e
Enable support for booting U-Boot image from ext filesystem when either SD/MMC or SATA support is compiled into the SPL. This will allow easy transition from loading U-Boot image from ad-hoc offset on the card to loading U-Boot image from the filesystem. VFAT support is intently not enabled. The boot order is tweaked so that raw is tested first and if the raw has no signature, FS boot is attempted. To install just the SPL on i.MX6 board, perform the following operation $ dd if=SPL of=/dev/sdX seek=2 bs=512 To install the U-Boot image, copy u-boot.img to the first partition of the SD/MMC/SATA drive. The partition must be formated to extfs. Signed-off-by: Marek Vasut <marex@denx.de> Cc: Fabio Estevam <fabio.estevam@nxp.com> Cc: Peng Fan <van.freenix@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Cc: Tom Rini <trini@konsulko.com>
389 lines
17 KiB
C
389 lines
17 KiB
C
/*
|
|
* Copyright (C) 2013, 2014 Markus Niebel <Markus.Niebel@tq-group.com>
|
|
*
|
|
* Configuration settings for the TQ Systems TQMa6<Q,S> module.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
#include <linux/kconfig.h>
|
|
/* SPL */
|
|
/* #if defined(CONFIG_SPL_BUILD) */
|
|
|
|
#define CONFIG_SPL_MMC_SUPPORT
|
|
#define CONFIG_SPL_SPI_SUPPORT
|
|
#define CONFIG_SPL_FAT_SUPPORT
|
|
|
|
/* common IMX6 SPL configuration */
|
|
#include "imx6_spl.h"
|
|
|
|
/* #endif */
|
|
|
|
/* place code in last 4 MiB of RAM */
|
|
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
|
|
#define CONFIG_SYS_TEXT_BASE 0x2fc00000
|
|
#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
|
|
#define CONFIG_SYS_TEXT_BASE 0x4fc00000
|
|
#endif
|
|
|
|
#include "mx6_common.h"
|
|
|
|
#if defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
|
|
#define PHYS_SDRAM_SIZE (512u * SZ_1M)
|
|
#elif defined(CONFIG_MX6Q) || defined(CONFIG_MX6D)
|
|
#define PHYS_SDRAM_SIZE (1024u * SZ_1M)
|
|
#endif
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F
|
|
#define CONFIG_BOARD_LATE_INIT
|
|
|
|
#define CONFIG_MXC_UART
|
|
|
|
/* SPI */
|
|
#define CONFIG_MXC_SPI
|
|
|
|
/* SPI Flash */
|
|
|
|
#define TQMA6_SPI_FLASH_SECTOR_SIZE SZ_64K
|
|
|
|
#define CONFIG_SF_DEFAULT_BUS 0
|
|
#define CONFIG_SF_DEFAULT_CS 0
|
|
#define CONFIG_SF_DEFAULT_SPEED 50000000
|
|
#define CONFIG_SF_DEFAULT_MODE (SPI_MODE_0)
|
|
|
|
/* I2C Configs */
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_MXC
|
|
#define CONFIG_SYS_I2C_MXC_I2C1 /* enable I2C bus 1 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C2 /* enable I2C bus 2 */
|
|
#define CONFIG_SYS_I2C_MXC_I2C3 /* enable I2C bus 3 */
|
|
#define CONFIG_I2C_MULTI_BUS
|
|
#define CONFIG_SYS_I2C_SPEED 100000
|
|
|
|
/* I2C SYSMON (LM75) */
|
|
#define CONFIG_DTT_LM75
|
|
#define CONFIG_DTT_MAX_TEMP 70
|
|
#define CONFIG_DTT_MIN_TEMP -30
|
|
#define CONFIG_DTT_HYSTERESIS 3
|
|
#define CONFIG_CMD_DTT
|
|
|
|
/* I2C EEPROM (M24C64) */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2
|
|
#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_BITS 5 /* 32 Bytes */
|
|
#define CONFIG_SYS_I2C_EEPROM_PAGE_WRITE_DELAY_MS 20
|
|
#define CONFIG_CMD_EEPROM
|
|
|
|
#define CONFIG_POWER
|
|
#define CONFIG_POWER_I2C
|
|
#define CONFIG_POWER_PFUZE100
|
|
#define CONFIG_POWER_PFUZE100_I2C_ADDR 0x08
|
|
#define TQMA6_PFUZE100_I2C_BUS 2
|
|
|
|
/* MMC Configs */
|
|
#define CONFIG_SYS_FSL_ESDHC_ADDR 0
|
|
|
|
/* USB Configs */
|
|
#define CONFIG_USB_EHCI
|
|
#define CONFIG_USB_EHCI_MX6
|
|
#define CONFIG_USB_STORAGE
|
|
#define CONFIG_USB_HOST_ETHER
|
|
#define CONFIG_USB_ETHER_SMSC95XX
|
|
#define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW)
|
|
#define CONFIG_USB_MAX_CONTROLLER_COUNT 2
|
|
#define CONFIG_EHCI_HCD_INIT_AFTER_RESET /* For OTG port */
|
|
|
|
#define CONFIG_FEC_MXC
|
|
#define IMX_FEC_BASE ENET_BASE_ADDR
|
|
#define CONFIG_PHYLIB
|
|
#define CONFIG_MII
|
|
|
|
#define CONFIG_ARP_TIMEOUT 200UL
|
|
/* Network config - Allow larger/faster download for TFTP/NFS */
|
|
#define CONFIG_IP_DEFRAG
|
|
#define CONFIG_TFTP_BLOCKSIZE 4096
|
|
#define CONFIG_NFS_READ_SIZE 4096
|
|
|
|
/* Command definition */
|
|
#define CONFIG_CMD_BMODE
|
|
|
|
#define CONFIG_ENV_SIZE (SZ_8K)
|
|
/* Size of malloc() pool */
|
|
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * SZ_1M)
|
|
|
|
#if defined(CONFIG_TQMA6X_MMC_BOOT)
|
|
|
|
#define CONFIG_ENV_IS_IN_MMC
|
|
#define TQMA6_UBOOT_OFFSET SZ_1K
|
|
#define TQMA6_UBOOT_SECTOR_START 0x2
|
|
#define TQMA6_UBOOT_SECTOR_COUNT 0x7fe
|
|
|
|
#define CONFIG_ENV_OFFSET SZ_1M
|
|
#define CONFIG_SYS_MMC_ENV_DEV 0
|
|
|
|
#define TQMA6_FDT_OFFSET (2 * SZ_1M)
|
|
#define TQMA6_FDT_SECTOR_START 0x1000
|
|
#define TQMA6_FDT_SECTOR_COUNT 0x800
|
|
|
|
#define TQMA6_KERNEL_SECTOR_START 0x2000
|
|
#define TQMA6_KERNEL_SECTOR_COUNT 0x2000
|
|
|
|
#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
|
|
"uboot_start="__stringify(TQMA6_UBOOT_SECTOR_START)"\0" \
|
|
"uboot_size="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
|
|
"fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
|
|
"fdt_size="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
|
|
"kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
|
|
"kernel_size="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
|
|
"mmcdev="__stringify(CONFIG_SYS_MMC_ENV_DEV)"\0" \
|
|
"loadimage=mmc dev ${mmcdev}; " \
|
|
"mmc read ${loadaddr} ${kernel_start} ${kernel_size};\0" \
|
|
"loadfdt=mmc dev ${mmcdev}; " \
|
|
"mmc read ${fdt_addr} ${fdt_start} ${fdt_size};\0" \
|
|
"update_uboot=if tftp ${uboot}; then " \
|
|
"if itest ${filesize} > 0; then " \
|
|
"mmc dev ${mmcdev}; mmc rescan; " \
|
|
"setexpr blkc ${filesize} / 0x200; " \
|
|
"setexpr blkc ${blkc} + 1; " \
|
|
"if itest ${blkc} <= ${uboot_size}; then " \
|
|
"mmc write ${loadaddr} ${uboot_start} " \
|
|
"${blkc}; " \
|
|
"fi; " \
|
|
"fi; fi; " \
|
|
"setenv filesize; setenv blkc \0" \
|
|
"update_kernel=run kernel_name; " \
|
|
"if tftp ${kernel}; then " \
|
|
"if itest ${filesize} > 0; then " \
|
|
"mmc dev ${mmcdev}; mmc rescan; " \
|
|
"setexpr blkc ${filesize} / 0x200; " \
|
|
"setexpr blkc ${blkc} + 1; " \
|
|
"if itest ${blkc} <= ${kernel_size}; then " \
|
|
"mmc write ${loadaddr} " \
|
|
"${kernel_start} ${blkc}; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"setenv filesize; setenv blkc \0" \
|
|
"update_fdt=if tftp ${fdt_file}; then " \
|
|
"if itest ${filesize} > 0; then " \
|
|
"mmc dev ${mmcdev}; mmc rescan; " \
|
|
"setexpr blkc ${filesize} / 0x200; " \
|
|
"setexpr blkc ${blkc} + 1; " \
|
|
"if itest ${blkc} <= ${fdt_size}; then " \
|
|
"mmc write ${loadaddr} ${fdt_start} ${blkc}; " \
|
|
"fi; " \
|
|
"fi; fi; " \
|
|
"setenv filesize; setenv blkc \0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"run mmcboot; run netboot; run panicboot"
|
|
|
|
#elif defined(CONFIG_TQMA6X_SPI_BOOT)
|
|
|
|
#define TQMA6_UBOOT_OFFSET 0x400
|
|
#define TQMA6_UBOOT_SECTOR_START 0x0
|
|
/* max u-boot size: 512k */
|
|
#define TQMA6_UBOOT_SECTOR_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
|
|
#define TQMA6_UBOOT_SECTOR_COUNT 0x8
|
|
#define TQMA6_UBOOT_SIZE (TQMA6_UBOOT_SECTOR_SIZE * \
|
|
TQMA6_UBOOT_SECTOR_COUNT)
|
|
|
|
#define CONFIG_ENV_IS_IN_SPI_FLASH
|
|
#define CONFIG_SYS_REDUNDAND_ENVIRONMENT
|
|
#define CONFIG_ENV_OFFSET (TQMA6_UBOOT_SIZE)
|
|
#define CONFIG_ENV_SECT_SIZE TQMA6_SPI_FLASH_SECTOR_SIZE
|
|
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + \
|
|
CONFIG_ENV_SECT_SIZE)
|
|
|
|
#define CONFIG_ENV_SPI_BUS (CONFIG_SF_DEFAULT_BUS)
|
|
#define CONFIG_ENV_SPI_CS (CONFIG_SF_DEFAULT_CS)
|
|
#define CONFIG_ENV_SPI_MAX_HZ (CONFIG_SF_DEFAULT_SPEED)
|
|
#define CONFIG_ENV_SPI_MODE (CONFIG_SF_DEFAULT_MODE)
|
|
|
|
#define TQMA6_FDT_OFFSET (CONFIG_ENV_OFFSET_REDUND + \
|
|
CONFIG_ENV_SECT_SIZE)
|
|
#define TQMA6_FDT_SECT_SIZE (TQMA6_SPI_FLASH_SECTOR_SIZE)
|
|
|
|
#define TQMA6_FDT_SECTOR_START 0x0a /* 8 Sector u-boot, 2 Sector env */
|
|
#define TQMA6_FDT_SECTOR_COUNT 0x01
|
|
|
|
#define TQMA6_KERNEL_SECTOR_START 0x10
|
|
#define TQMA6_KERNEL_SECTOR_COUNT 0x60
|
|
|
|
#define TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
|
|
"mmcblkdev=0\0" \
|
|
"uboot_offset="__stringify(TQMA6_UBOOT_OFFSET)"\0" \
|
|
"uboot_sectors="__stringify(TQMA6_UBOOT_SECTOR_COUNT)"\0" \
|
|
"fdt_start="__stringify(TQMA6_FDT_SECTOR_START)"\0" \
|
|
"fdt_sectors="__stringify(TQMA6_FDT_SECTOR_COUNT)"\0" \
|
|
"kernel_start="__stringify(TQMA6_KERNEL_SECTOR_START)"\0" \
|
|
"kernel_sectors="__stringify(TQMA6_KERNEL_SECTOR_COUNT)"\0" \
|
|
"update_uboot=if tftp ${uboot}; then " \
|
|
"if itest ${filesize} > 0; then " \
|
|
"setexpr blkc ${filesize} + " \
|
|
__stringify(TQMA6_UBOOT_OFFSET) "; " \
|
|
"setexpr size ${uboot_sectors} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"if itest ${blkc} <= ${size}; then " \
|
|
"sf probe; " \
|
|
"sf erase 0 ${size}; " \
|
|
"sf write ${loadaddr} ${uboot_offset} " \
|
|
"${filesize}; " \
|
|
"fi; " \
|
|
"fi; fi; " \
|
|
"setenv filesize 0; setenv blkc; setenv size \0" \
|
|
"update_kernel=run kernel_name; if tftp ${kernel}; then " \
|
|
"if itest ${filesize} > 0; then " \
|
|
"setexpr size ${kernel_sectors} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"setexpr offset ${kernel_start} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"if itest ${filesize} <= ${size}; then " \
|
|
"sf probe; " \
|
|
"sf erase ${offset} ${size}; " \
|
|
"sf write ${loadaddr} ${offset} " \
|
|
"${filesize}; " \
|
|
"fi; " \
|
|
"fi; fi; " \
|
|
"setenv filesize 0; setenv size ; setenv offset\0" \
|
|
"update_fdt=if tftp ${fdt_file}; then " \
|
|
"if itest ${filesize} > 0; then " \
|
|
"setexpr size ${fdt_sectors} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"setexpr offset ${fdt_start} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"if itest ${filesize} <= ${size}; then " \
|
|
"sf probe; " \
|
|
"sf erase ${offset} ${size}; " \
|
|
"sf write ${loadaddr} ${offset} " \
|
|
"${filesize}; " \
|
|
"fi; " \
|
|
"fi; fi; " \
|
|
"setenv filesize 0; setenv size ; setenv offset\0" \
|
|
"loadimage=sf probe; " \
|
|
"setexpr size ${kernel_sectors} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"setexpr offset ${kernel_start} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"sf read ${loadaddr} ${offset} ${size}; " \
|
|
"setenv size ; setenv offset\0" \
|
|
"loadfdt=sf probe; " \
|
|
"setexpr size ${fdt_sectors} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"setexpr offset ${fdt_start} * " \
|
|
__stringify(TQMA6_SPI_FLASH_SECTOR_SIZE)"; " \
|
|
"sf read ${${fdt_addr}} ${offset} ${size}; " \
|
|
"setenv size ; setenv offset\0" \
|
|
|
|
#define CONFIG_BOOTCOMMAND \
|
|
"sf probe; run mmcboot; run netboot; run panicboot" \
|
|
|
|
#else
|
|
|
|
#error "need to define boot source"
|
|
|
|
#endif
|
|
|
|
/* 128 MiB offset as in ARM related docu for linux suggested */
|
|
#define TQMA6_FDT_ADDRESS 0x18000000
|
|
|
|
#define CONFIG_EXTRA_ENV_SETTINGS \
|
|
"board=tqma6\0" \
|
|
"uimage=uImage\0" \
|
|
"zimage=zImage\0" \
|
|
"boot_type=bootz\0" \
|
|
"kernel_name=if test \"${boot_type}\" != bootz; then " \
|
|
"setenv kernel ${uimage}; " \
|
|
"else setenv kernel ${zimage}; fi\0" \
|
|
"uboot=u-boot.imx\0" \
|
|
"fdt_file=" CONFIG_DEFAULT_FDT_FILE "\0" \
|
|
"fdt_addr="__stringify(TQMA6_FDT_ADDRESS)"\0" \
|
|
"console=" CONFIG_CONSOLE_DEV "\0" \
|
|
"fdt_high=0xffffffff\0" \
|
|
"initrd_high=0xffffffff\0" \
|
|
"addtty=setenv bootargs ${bootargs} console=${console},${baudrate}\0" \
|
|
"addfb=setenv bootargs ${bootargs} " \
|
|
"imx-fbdev.legacyfb_depth=32 consoleblank=0\0" \
|
|
"mmcpart=2\0" \
|
|
"mmcblkdev=0\0" \
|
|
"mmcargs=run addmmc addtty addfb\0" \
|
|
"addmmc=setenv bootargs ${bootargs} " \
|
|
"root=/dev/mmcblk${mmcblkdev}p${mmcpart} rw rootwait\0" \
|
|
"mmcboot=echo Booting from mmc ...; " \
|
|
"setenv bootargs; " \
|
|
"run mmcargs; " \
|
|
"run loadimage; " \
|
|
"if run loadfdt; then " \
|
|
"echo boot device tree kernel ...; " \
|
|
"${boot_type} ${loadaddr} - ${fdt_addr}; " \
|
|
"else " \
|
|
"${boot_type}; " \
|
|
"fi;\0" \
|
|
"setenv bootargs \0" \
|
|
"netdev=eth0\0" \
|
|
"rootpath=/srv/nfs/tqma6\0" \
|
|
"ipmode=static\0" \
|
|
"netargs=run addnfs addip addtty addfb\0" \
|
|
"addnfs=setenv bootargs ${bootargs} " \
|
|
"root=/dev/nfs rw " \
|
|
"nfsroot=${serverip}:${rootpath},v3,tcp;\0" \
|
|
"addip_static=setenv bootargs ${bootargs} " \
|
|
"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \
|
|
"${hostname}:${netdev}:off\0" \
|
|
"addip_dynamic=setenv bootargs ${bootargs} ip=dhcp\0" \
|
|
"addip=if test \"${ipmode}\" != static; then " \
|
|
"run addip_dynamic; else run addip_static; fi\0" \
|
|
"set_getcmd=if test \"${ipmode}\" != static; then " \
|
|
"setenv getcmd dhcp; setenv autoload yes; " \
|
|
"else setenv getcmd tftp; setenv autoload no; fi\0" \
|
|
"netboot=echo Booting from net ...; " \
|
|
"run kernel_name; " \
|
|
"run set_getcmd; " \
|
|
"setenv bootargs; " \
|
|
"run netargs; " \
|
|
"if ${getcmd} ${kernel}; then " \
|
|
"if ${getcmd} ${fdt_addr} ${fdt_file}; then " \
|
|
"${boot_type} ${loadaddr} - ${fdt_addr}; " \
|
|
"fi; " \
|
|
"fi; " \
|
|
"echo ... failed\0" \
|
|
"panicboot=echo No boot device !!! reset\0" \
|
|
TQMA6_EXTRA_BOOTDEV_ENV_SETTINGS \
|
|
|
|
#define CONFIG_STACKSIZE (128u * SZ_1K)
|
|
|
|
/* Physical Memory Map */
|
|
#define CONFIG_NR_DRAM_BANKS 1
|
|
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
|
|
|
|
#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM
|
|
#define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR
|
|
#define CONFIG_SYS_INIT_RAM_SIZE IRAM_SIZE
|
|
|
|
#define CONFIG_SYS_INIT_SP_OFFSET \
|
|
(CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
#define CONFIG_SYS_INIT_SP_ADDR \
|
|
(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
|
|
|
|
/*
|
|
* All the defines above are for the TQMa6 SoM
|
|
*
|
|
* Now include the baseboard specific configuration
|
|
*/
|
|
#ifdef CONFIG_MBA6
|
|
#include "tqma6_mba6.h"
|
|
#elif CONFIG_WRU4
|
|
#include "tqma6_wru4.h"
|
|
#else
|
|
#error "No baseboard for the TQMa6 defined!"
|
|
#endif
|
|
|
|
/* Support at least the sensor on TQMa6 SOM */
|
|
#if !defined(CONFIG_DTT_SENSORS)
|
|
#define CONFIG_DTT_SENSORS { 0 }
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|