mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-30 08:31:03 +00:00
bb597c0eeb
move CONFIG_BOOTDELAY into a Kconfig option. Used for this purpose the moveconfig.py tool in tools. Signed-off-by: Heiko Schocher <hs@denx.de> Reviewed-by: Tom Rini <trini@konsulko.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Igor Grinberg <grinberg@compulab.co.il>
399 lines
15 KiB
C
399 lines
15 KiB
C
/*
|
|
* (C) Copyright 2001, 2002
|
|
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
|
|
*
|
|
* SPDX-License-Identifier: GPL-2.0+
|
|
*/
|
|
|
|
/*
|
|
* board/config.h - configuration options, board specific
|
|
*/
|
|
|
|
#ifndef __CONFIG_H
|
|
#define __CONFIG_H
|
|
|
|
/***********************************************************
|
|
* High Level Configuration Options
|
|
* (easy to change)
|
|
***********************************************************/
|
|
#define CONFIG_405GP 1 /* This is a PPC405 CPU */
|
|
#define CONFIG_MIP405 1 /* ...on a MIP405 board */
|
|
|
|
#define CONFIG_SYS_TEXT_BASE 0xFFF80000
|
|
|
|
/***********************************************************
|
|
* Note that it may also be a MIP405T board which is a subset of the
|
|
* MIP405
|
|
***********************************************************/
|
|
/***********************************************************
|
|
* WARNING:
|
|
* CONFIG_BOOT_PCI is only used for first boot-up and should
|
|
* NOT be enabled for production bootloader
|
|
***********************************************************/
|
|
/*#define CONFIG_BOOT_PCI 1*/
|
|
/***********************************************************
|
|
* Clock
|
|
***********************************************************/
|
|
#define CONFIG_SYS_CLK_FREQ 33000000 /* external frequency to pll */
|
|
|
|
/*
|
|
* BOOTP options
|
|
*/
|
|
#define CONFIG_BOOTP_BOOTFILESIZE
|
|
#define CONFIG_BOOTP_BOOTPATH
|
|
#define CONFIG_BOOTP_GATEWAY
|
|
#define CONFIG_BOOTP_HOSTNAME
|
|
|
|
/*
|
|
* Command line configuration.
|
|
*/
|
|
#define CONFIG_CMD_DATE
|
|
#define CONFIG_CMD_EEPROM
|
|
#define CONFIG_CMD_IDE
|
|
#define CONFIG_CMD_IRQ
|
|
#define CONFIG_CMD_JFFS2
|
|
#define CONFIG_CMD_PCI
|
|
#define CONFIG_CMD_REGINFO
|
|
#define CONFIG_CMD_SAVES
|
|
#define CONFIG_CMD_BSP
|
|
|
|
#if !defined(CONFIG_MIP405T)
|
|
#endif
|
|
|
|
/**************************************************************
|
|
* I2C Stuff:
|
|
* the MIP405 is equiped with an Atmel 24C128/256 EEPROM at address
|
|
* 0x53.
|
|
* The Atmel EEPROM uses 16Bit addressing.
|
|
***************************************************************/
|
|
|
|
#define CONFIG_SYS_I2C
|
|
#define CONFIG_SYS_I2C_PPC4XX
|
|
#define CONFIG_SYS_I2C_PPC4XX_CH0
|
|
#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 50000
|
|
#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F
|
|
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR 0x53 /* EEPROM 24C128/256 */
|
|
#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 /* Bytes of address */
|
|
/* mask of address bits that overflow into the "EEPROM chip address" */
|
|
#undef CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 6 /* The Atmel 24C128/256 has */
|
|
/* 64 byte page write mode using*/
|
|
/* last 6 bits of the address */
|
|
#define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS 10 /* and takes up to 10 msec */
|
|
|
|
#define CONFIG_ENV_IS_IN_EEPROM 1 /* use EEPROM for environment vars */
|
|
#define CONFIG_ENV_OFFSET 0x00000 /* environment starts at the beginning of the EEPROM */
|
|
#define CONFIG_ENV_SIZE 0x00800 /* 2k bytes may be used for env vars */
|
|
|
|
/***************************************************************
|
|
* Definitions for Serial Presence Detect EEPROM address
|
|
* (to get SDRAM settings)
|
|
***************************************************************/
|
|
/*#define SDRAM_EEPROM_WRITE_ADDRESS 0xA0
|
|
#define SDRAM_EEPROM_READ_ADDRESS 0xA1
|
|
*/
|
|
/**************************************************************
|
|
* Environment definitions
|
|
**************************************************************/
|
|
#define CONFIG_BAUDRATE 9600 /* STD Baudrate */
|
|
/* autoboot (do NOT change this set environment variable "bootdelay" to -1 instead) */
|
|
/* #define CONFIG_BOOT_RETRY_TIME -10 /XXX* feature is available but not enabled */
|
|
#define CONFIG_ZERO_BOOTDELAY_CHECK /* check console even if bootdelay = 0 */
|
|
|
|
#define CONFIG_BOOTCOMMAND "diskboot 400000 0:1; bootm" /* autoboot command */
|
|
#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/hda5" /* boot arguments */
|
|
|
|
#define CONFIG_IPADDR 10.0.0.100
|
|
#define CONFIG_SERVERIP 10.0.0.1
|
|
#define CONFIG_PREBOOT
|
|
/***************************************************************
|
|
* defines if the console is stored in the environment
|
|
***************************************************************/
|
|
#define CONFIG_SYS_CONSOLE_IS_IN_ENV /* stdin, stdout and stderr are in evironment */
|
|
/***************************************************************
|
|
* defines if an overwrite_console function exists
|
|
*************************************************************/
|
|
#define CONFIG_SYS_CONSOLE_OVERWRITE_ROUTINE
|
|
#define CONFIG_SYS_CONSOLE_INFO_QUIET
|
|
/***************************************************************
|
|
* defines if the overwrite_console should be stored in the
|
|
* environment
|
|
**************************************************************/
|
|
#undef CONFIG_SYS_CONSOLE_ENV_OVERWRITE
|
|
|
|
/**************************************************************
|
|
* loads config
|
|
*************************************************************/
|
|
#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
|
|
#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
|
|
|
|
#define CONFIG_MISC_INIT_R
|
|
/***********************************************************
|
|
* Miscellaneous configurable options
|
|
**********************************************************/
|
|
#define CONFIG_SYS_LONGHELP /* undef to save memory */
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */
|
|
#else
|
|
#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
|
|
#endif
|
|
#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
|
|
#define CONFIG_SYS_MAXARGS 16 /* max number of command args */
|
|
#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Argument Buffer Size */
|
|
|
|
#define CONFIG_SYS_MEMTEST_START 0x0100000 /* memtest works on */
|
|
#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 1 ... 12 MB in DRAM */
|
|
|
|
#define CONFIG_CONS_INDEX 1 /* Use UART0 */
|
|
#define CONFIG_SYS_NS16550_SERIAL
|
|
#define CONFIG_SYS_NS16550_REG_SIZE 1
|
|
#define CONFIG_SYS_NS16550_CLK get_serial_clock()
|
|
|
|
#undef CONFIG_SYS_EXT_SERIAL_CLOCK /* no external serial clock used */
|
|
#define CONFIG_SYS_BASE_BAUD 916667
|
|
|
|
/* The following table includes the supported baudrates */
|
|
#define CONFIG_SYS_BAUDRATE_TABLE \
|
|
{ 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, \
|
|
57600, 115200, 230400, 460800, 921600 }
|
|
|
|
#define CONFIG_SYS_LOAD_ADDR 0x400000 /* default load address */
|
|
#define CONFIG_SYS_EXTBDINFO 1 /* To use extended board_into (bd_t) */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* PCI stuff
|
|
*-----------------------------------------------------------------------
|
|
*/
|
|
#define PCI_HOST_ADAPTER 0 /* configure as pci adapter */
|
|
#define PCI_HOST_FORCE 1 /* configure as pci host */
|
|
#define PCI_HOST_AUTO 2 /* detected via arbiter enable */
|
|
|
|
#define CONFIG_PCI /* include pci support */
|
|
#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */
|
|
#define CONFIG_PCI_HOST PCI_HOST_FORCE /* configure as pci-host */
|
|
#define CONFIG_PCI_PNP /* pci plug-and-play */
|
|
/* resource configuration */
|
|
#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x0000 /* PCI Vendor ID: to-do!!! */
|
|
#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0x0000 /* PCI Device ID: to-do!!! */
|
|
#define CONFIG_SYS_PCI_PTM1LA 0x00000000 /* point to sdram */
|
|
#define CONFIG_SYS_PCI_PTM1MS 0x80000001 /* 2GB, enable hard-wired to 1 */
|
|
#define CONFIG_SYS_PCI_PTM1PCI 0x00000000 /* Host: use this pci address */
|
|
#define CONFIG_SYS_PCI_PTM2LA 0x00000000 /* disabled */
|
|
#define CONFIG_SYS_PCI_PTM2MS 0x00000000 /* disabled */
|
|
#define CONFIG_SYS_PCI_PTM2PCI 0x00000000 /* Host: use this pci address */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Start addresses for the final memory configuration
|
|
* (Set up by the startup code)
|
|
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
|
|
*/
|
|
#define CONFIG_SYS_SDRAM_BASE 0x00000000
|
|
#define CONFIG_SYS_FLASH_BASE 0xFFF80000
|
|
#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
|
|
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
|
|
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserve 1024 kB for malloc() */
|
|
|
|
/*
|
|
* For booting Linux, the board info and command line data
|
|
* have to be in the first 8 MB of memory, since this is
|
|
* the maximum mapped by the Linux kernel during initialization.
|
|
*/
|
|
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
|
|
/*-----------------------------------------------------------------------
|
|
* FLASH organization
|
|
*/
|
|
#define CONFIG_SYS_UPDATE_FLASH_SIZE
|
|
#define CONFIG_SYS_FLASH_PROTECTION
|
|
#define CONFIG_SYS_FLASH_EMPTY_INFO
|
|
|
|
#define CONFIG_SYS_FLASH_CFI
|
|
#define CONFIG_FLASH_CFI_DRIVER
|
|
|
|
#define CONFIG_FLASH_SHOW_PROGRESS 45
|
|
|
|
#define CONFIG_SYS_MAX_FLASH_BANKS 1
|
|
#define CONFIG_SYS_MAX_FLASH_SECT 256
|
|
|
|
/*
|
|
* JFFS2 partitions
|
|
*
|
|
*/
|
|
/* No command line, one static partition, whole device */
|
|
#undef CONFIG_CMD_MTDPARTS
|
|
#define CONFIG_JFFS2_DEV "nor0"
|
|
#define CONFIG_JFFS2_PART_SIZE 0xFFFFFFFF
|
|
#define CONFIG_JFFS2_PART_OFFSET 0x00000000
|
|
|
|
/* mtdparts command line support */
|
|
/* Note: fake mtd_id used, no linux mtd map file */
|
|
/*
|
|
#define CONFIG_CMD_MTDPARTS
|
|
#define MTDIDS_DEFAULT "nor0=mip405-0"
|
|
#define MTDPARTS_DEFAULT "mtdparts=mip405-0:-(jffs2)"
|
|
*/
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Logbuffer Configuration
|
|
*/
|
|
#undef CONFIG_LOGBUFFER /* supported but not enabled */
|
|
/*-----------------------------------------------------------------------
|
|
* Bootcountlimit Configuration
|
|
*/
|
|
#undef CONFIG_BOOTCOUNT_LIMIT /* supported but not enabled */
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* POST Configuration
|
|
*/
|
|
#if 0 /* enable this if POST is desired (is supported but not enabled) */
|
|
#define CONFIG_POST (CONFIG_SYS_POST_MEMORY | \
|
|
CONFIG_SYS_POST_CPU | \
|
|
CONFIG_SYS_POST_RTC | \
|
|
CONFIG_SYS_POST_I2C)
|
|
|
|
#endif
|
|
/*
|
|
* Init Memory Controller:
|
|
*/
|
|
#define FLASH_MAX_SIZE 0x00800000 /* 8MByte max */
|
|
#define FLASH_BASE_PRELIM 0xFF800000 /* open the flash CS */
|
|
/* Size: 0=1MB, 1=2MB, 2=4MB, 3=8MB, 4=16MB, 5=32MB, 6=64MB, 7=128MB */
|
|
#define FLASH_SIZE_PRELIM 3 /* maximal flash FLASH size bank #0 */
|
|
|
|
#define CONFIG_BOARD_EARLY_INIT_F 1
|
|
#define CONFIG_BOARD_EARLY_INIT_R
|
|
|
|
/* Peripheral Bus Mapping */
|
|
#define PER_PLD_ADDR 0xF4000000 /* smallest window is 1MByte 0x10 0000*/
|
|
#define PER_UART0_ADDR 0xF4100000 /* smallest window is 1MByte 0x10 0000*/
|
|
#define PER_UART1_ADDR 0xF4200000 /* smallest window is 1MByte 0x10 0000*/
|
|
|
|
#define MULTI_PURPOSE_SOCKET_ADDR 0xF8000000
|
|
#define CONFIG_PORT_ADDR PER_PLD_ADDR + 5
|
|
|
|
/*-----------------------------------------------------------------------
|
|
* Definitions for initial stack pointer and data area (in On Chip SRAM)
|
|
*/
|
|
#define CONFIG_SYS_TEMP_STACK_OCM 1
|
|
#define CONFIG_SYS_OCM_DATA_ADDR 0xF0000000
|
|
#define CONFIG_SYS_OCM_DATA_SIZE 0x1000
|
|
#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_OCM_DATA_ADDR /* inside of On Chip SRAM */
|
|
#define CONFIG_SYS_INIT_RAM_SIZE CONFIG_SYS_OCM_DATA_SIZE /* Size of On Chip SRAM */
|
|
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
|
|
/* reserve some memory for POST and BOOT limit info */
|
|
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 32)
|
|
|
|
#ifdef CONFIG_BOOTCOUNT_LIMIT /* reserve 2 word for bootcount limit */
|
|
#define CONFIG_SYS_BOOTCOUNT_ADDR (CONFIG_SYS_GBL_DATA_OFFSET - 12)
|
|
#endif
|
|
|
|
/***********************************************************************
|
|
* External peripheral base address
|
|
***********************************************************************/
|
|
#define CONFIG_SYS_ISA_IO_BASE_ADDRESS 0xE8000000
|
|
|
|
/***********************************************************************
|
|
* Last Stage Init
|
|
***********************************************************************/
|
|
#define CONFIG_LAST_STAGE_INIT
|
|
/************************************************************
|
|
* Ethernet Stuff
|
|
***********************************************************/
|
|
#define CONFIG_PPC4xx_EMAC
|
|
#define CONFIG_MII 1 /* MII PHY management */
|
|
#define CONFIG_PHY_ADDR 1 /* PHY address */
|
|
#define CONFIG_PHY_RESET_DELAY 300 /* Intel LXT971A needs this */
|
|
#define CONFIG_PHY_CMD_DELAY 40 /* Intel LXT971A needs this */
|
|
/************************************************************
|
|
* RTC
|
|
***********************************************************/
|
|
#define CONFIG_RTC_MC146818
|
|
#undef CONFIG_WATCHDOG /* watchdog disabled */
|
|
|
|
/************************************************************
|
|
* IDE/ATA stuff
|
|
************************************************************/
|
|
#if defined(CONFIG_MIP405T)
|
|
#define CONFIG_SYS_IDE_MAXBUS 1 /* MIP405T has only one IDE bus */
|
|
#else
|
|
#define CONFIG_SYS_IDE_MAXBUS 2 /* max. 2 IDE busses */
|
|
#endif
|
|
|
|
#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*2) /* max. 2 drives per IDE bus */
|
|
|
|
#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS /* base address */
|
|
#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01F0 /* ide0 offste */
|
|
#define CONFIG_SYS_ATA_IDE1_OFFSET 0x0170 /* ide1 offset */
|
|
#define CONFIG_SYS_ATA_DATA_OFFSET 0 /* data reg offset */
|
|
#define CONFIG_SYS_ATA_REG_OFFSET 0 /* reg offset */
|
|
#define CONFIG_SYS_ATA_ALT_OFFSET 0x200 /* alternate register offset */
|
|
|
|
#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */
|
|
#undef CONFIG_IDE_LED /* no led for ide supported */
|
|
#define CONFIG_IDE_RESET /* reset for ide supported... */
|
|
#define CONFIG_IDE_RESET_ROUTINE /* with a special reset function */
|
|
#define CONFIG_SUPPORT_VFAT
|
|
/************************************************************
|
|
* ATAPI support (experimental)
|
|
************************************************************/
|
|
#define CONFIG_ATAPI /* enable ATAPI Support */
|
|
|
|
/************************************************************
|
|
* DISK Partition support
|
|
************************************************************/
|
|
#define CONFIG_DOS_PARTITION
|
|
#define CONFIG_MAC_PARTITION
|
|
#define CONFIG_ISO_PARTITION /* Experimental */
|
|
|
|
/************************************************************
|
|
* Video support
|
|
************************************************************/
|
|
#define CONFIG_VIDEO /*To enable video controller support */
|
|
#define CONFIG_VIDEO_CT69000
|
|
#define CONFIG_CFB_CONSOLE
|
|
#define CONFIG_VIDEO_LOGO
|
|
#define CONFIG_CONSOLE_EXTRA_INFO
|
|
#define CONFIG_VGA_AS_SINGLE_DEVICE
|
|
#define CONFIG_VIDEO_SW_CURSOR
|
|
#undef CONFIG_VIDEO_ONBOARD
|
|
/************************************************************
|
|
* USB support EXPERIMENTAL
|
|
************************************************************/
|
|
#if !defined(CONFIG_MIP405T)
|
|
#define CONFIG_USB_UHCI
|
|
#define CONFIG_USB_KEYBOARD
|
|
#define CONFIG_USB_STORAGE
|
|
|
|
/* Enable needed helper functions */
|
|
#define CONFIG_SYS_STDIO_DEREGISTER /* needs stdio_deregister */
|
|
#endif
|
|
/************************************************************
|
|
* Debug support
|
|
************************************************************/
|
|
#if defined(CONFIG_CMD_KGDB)
|
|
#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */
|
|
#endif
|
|
|
|
/************************************************************
|
|
* support BZIP2 compression
|
|
************************************************************/
|
|
#define CONFIG_BZIP2 1
|
|
|
|
/************************************************************
|
|
* Ident
|
|
************************************************************/
|
|
|
|
#define VERSION_TAG "released"
|
|
#if !defined(CONFIG_MIP405T)
|
|
#define CONFIG_ISO_STRING "MEV-10072-001"
|
|
#else
|
|
#define CONFIG_ISO_STRING "MEV-10082-001"
|
|
#endif
|
|
|
|
#if !defined(CONFIG_BOOT_PCI)
|
|
#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, " CONFIG_ISO_STRING " " VERSION_TAG
|
|
#else
|
|
#define CONFIG_IDENT_STRING "\n(c) 2003 by MPL AG Switzerland, PCI_BOOT Version"
|
|
#endif
|
|
|
|
#endif /* __CONFIG_H */
|