u-boot/arch/arm/dts/k3-j721e-common-proc-board-u-boot.dtsi
Keerthy 896cf0e20a arm: dts: k3-j721e: Enable ospi1/qspi
Enable the ospi1/qspi for both r5 and a72 configurations.

Signed-off-by: Keerthy <j-keerthy@ti.com>
2020-03-06 12:53:00 +05:30

379 lines
7.4 KiB
Text

// SPDX-License-Identifier: GPL-2.0
/*
* Copyright (C) 2018 Texas Instruments Incorporated - http://www.ti.com/
*/
#include <dt-bindings/dma/k3-udma.h>
#include <dt-bindings/net/ti-dp83867.h>
/ {
chosen {
stdout-path = "serial2:115200n8";
tick-timer = &timer1;
};
aliases {
ethernet0 = &cpsw_port1;
};
};
&cbass_main{
u-boot,dm-spl;
};
&cbass_mcu_wakeup {
u-boot,dm-spl;
timer1: timer@40400000 {
compatible = "ti,omap5430-timer";
reg = <0x0 0x40400000 0x0 0x80>;
ti,timer-alwon;
clock-frequency = <25000000>;
u-boot,dm-spl;
};
mcu_conf: scm_conf@40f00000 {
compatible = "syscon", "simple-mfd";
reg = <0x0 0x40f00000 0x0 0x20000>;
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x0 0x40f00000 0x20000>;
phy_sel: cpsw-phy-sel@4040 {
compatible = "ti,am654-cpsw-phy-sel";
reg = <0x4040 0x4>;
reg-names = "gmii-sel";
};
};
cbass_mcu_navss: mcu_navss {
compatible = "simple-bus";
#address-cells = <2>;
#size-cells = <2>;
dma-coherent;
dma-ranges;
ranges;
ti,sci-dev-id = <232>;
u-boot,dm-spl;
mcu_ringacc: ringacc@2b800000 {
compatible = "ti,am654-navss-ringacc";
reg = <0x0 0x2b800000 0x0 0x400000>,
<0x0 0x2b000000 0x0 0x400000>,
<0x0 0x28590000 0x0 0x100>,
<0x0 0x2a500000 0x0 0x40000>;
reg-names = "rt", "fifos", "proxy_gcfg", "proxy_target";
ti,num-rings = <286>;
ti,sci-rm-range-gp-rings = <0x1>; /* GP ring range */
ti,sci = <&dmsc>;
ti,sci-dev-id = <235>;
u-boot,dm-spl;
};
mcu_udmap: udmap@31150000 {
compatible = "ti,j721e-navss-mcu-udmap";
reg = <0x0 0x285c0000 0x0 0x100>,
<0x0 0x2a800000 0x0 0x40000>,
<0x0 0x2aa00000 0x0 0x40000>;
reg-names = "gcfg", "rchanrt", "tchanrt";
#dma-cells = <3>;
ti,ringacc = <&mcu_ringacc>;
ti,psil-base = <0x6000>;
ti,sci = <&dmsc>;
ti,sci-dev-id = <236>;
ti,sci-rm-range-tchan = <0x0d>, /* TX_CHAN */
<0x0f>; /* TX_HCHAN */
ti,sci-rm-range-rchan = <0x0a>, /* RX_CHAN */
<0x0b>; /* RX_HCHAN */
ti,sci-rm-range-rflow = <0x00>; /* GP RFLOW */
u-boot,dm-spl;
};
};
mcu_cpsw: ethernet@046000000 {
compatible = "ti,j721e-cpsw-nuss";
#address-cells = <2>;
#size-cells = <2>;
reg = <0x0 0x46000000 0x0 0x200000>;
reg-names = "cpsw_nuss";
ranges;
dma-coherent;
clocks = <&k3_clks 18 22>;
clock-names = "fck";
power-domains = <&k3_pds 18 TI_SCI_PD_EXCLUSIVE>;
ti,psil-base = <0x7000>;
cpsw-phy-sel = <&phy_sel>;
dmas = <&mcu_udmap &mcu_cpsw 0 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 1 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 2 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 3 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 4 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 5 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 6 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 7 UDMA_DIR_TX>,
<&mcu_udmap &mcu_cpsw 0 UDMA_DIR_RX>;
dma-names = "tx0", "tx1", "tx2", "tx3",
"tx4", "tx5", "tx6", "tx7",
"rx";
ports {
#address-cells = <1>;
#size-cells = <0>;
host: host@0 {
reg = <0>;
ti,label = "host";
};
cpsw_port1: port@1 {
reg = <1>;
ti,mac-only;
ti,label = "port1";
ti,syscon-efuse = <&mcu_conf 0x200>;
};
};
davinci_mdio: mdio {
#address-cells = <1>;
#size-cells = <0>;
bus_freq = <1000000>;
};
cpts {
clocks = <&k3_clks 18 2>;
clock-names = "cpts";
interrupts-extended = <&gic500 GIC_SPI 858 IRQ_TYPE_LEVEL_HIGH>;
interrupt-names = "cpts";
ti,cpts-ext-ts-inputs = <4>;
ti,cpts-periodic-outputs = <2>;
};
ti,psil-config0 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
ti,psil-config1 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
ti,psil-config2 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
ti,psil-config3 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
ti,psil-config4 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
ti,psil-config5 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
ti,psil-config6 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
ti,psil-config7 {
linux,udma-mode = <UDMA_PKT_MODE>;
statictr-type = <PSIL_STATIC_TR_NONE>;
ti,needs-epib;
ti,psd-size = <16>;
};
};
};
&secure_proxy_main {
u-boot,dm-spl;
};
&dmsc {
u-boot,dm-spl;
k3_sysreset: sysreset-controller {
compatible = "ti,sci-sysreset";
u-boot,dm-spl;
};
};
&k3_pds {
u-boot,dm-spl;
};
&k3_clks {
u-boot,dm-spl;
};
&k3_reset {
u-boot,dm-spl;
};
&wkup_pmx0 {
u-boot,dm-spl;
mcu_cpsw_pins_default: mcu_cpsw_pins_default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x0058, PIN_OUTPUT, 0) /* (N4) MCU_RGMII1_TX_CTL */
J721E_WKUP_IOPAD(0x005c, PIN_INPUT, 0) /* (N5) MCU_RGMII1_RX_CTL */
J721E_WKUP_IOPAD(0x0060, PIN_OUTPUT, 0) /* (M2) MCU_RGMII1_TD3 */
J721E_WKUP_IOPAD(0x0064, PIN_OUTPUT, 0) /* (M3) MCU_RGMII1_TD2 */
J721E_WKUP_IOPAD(0x0068, PIN_OUTPUT, 0) /* (M4) MCU_RGMII1_TD1 */
J721E_WKUP_IOPAD(0x006c, PIN_OUTPUT, 0) /* (M5) MCU_RGMII1_TD0 */
J721E_WKUP_IOPAD(0x0078, PIN_INPUT, 0) /* (L2) MCU_RGMII1_RD3 */
J721E_WKUP_IOPAD(0x007c, PIN_INPUT, 0) /* (L5) MCU_RGMII1_RD2 */
J721E_WKUP_IOPAD(0x0080, PIN_INPUT, 0) /* (M6) MCU_RGMII1_RD1 */
J721E_WKUP_IOPAD(0x0084, PIN_INPUT, 0) /* (L6) MCU_RGMII1_RD0 */
J721E_WKUP_IOPAD(0x0070, PIN_INPUT, 0) /* (N1) MCU_RGMII1_TXC */
J721E_WKUP_IOPAD(0x0074, PIN_INPUT, 0) /* (M1) MCU_RGMII1_RXC */
>;
};
mcu_mdio_pins_default: mcu_mdio1_pins_default {
pinctrl-single,pins = <
J721E_WKUP_IOPAD(0x008c, PIN_OUTPUT, 0) /* (L1) MCU_MDIO0_MDC */
J721E_WKUP_IOPAD(0x0088, PIN_INPUT, 0) /* (L4) MCU_MDIO0_MDIO */
>;
};
};
&main_pmx0 {
u-boot,dm-spl;
};
&main_uart0 {
u-boot,dm-spl;
};
&mcu_uart0 {
u-boot,dm-spl;
};
&main_sdhci0 {
u-boot,dm-spl;
};
&main_sdhci1 {
u-boot,dm-spl;
};
&main_usbss0_pins_default {
u-boot,dm-spl;
};
&usbss0 {
u-boot,dm-spl;
ti,usb2-only;
};
&usb0 {
dr_mode = "peripheral";
u-boot,dm-spl;
};
&mcu_cpsw {
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default &mcu_mdio_pins_default>;
};
&davinci_mdio {
phy0: ethernet-phy@0 {
reg = <0>;
ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
};
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&phy0>;
};
&mcu_cpsw {
reg = <0x0 0x46000000 0x0 0x200000>,
<0x0 0x40f00200 0x0 0x2>;
reg-names = "cpsw_nuss", "mac_efuse";
cpsw-phy-sel@40f04040 {
compatible = "ti,am654-cpsw-phy-sel";
reg= <0x0 0x40f04040 0x0 0x4>;
reg-names = "gmii-sel";
};
};
&main_mmc1_pins_default {
u-boot,dm-spl;
};
&wkup_i2c0_pins_default {
u-boot,dm-spl;
};
&wkup_i2c0 {
u-boot,dm-spl;
};
&main_i2c0 {
u-boot,dm-spl;
};
&main_i2c0_pins_default {
u-boot,dm-spl;
};
&exp2 {
u-boot,dm-spl;
};
&mcu_fss0_ospi0_pins_default {
u-boot,dm-spl;
};
&fss {
u-boot,dm-spl;
};
&ospi0 {
u-boot,dm-spl;
flash@0 {
u-boot,dm-spl;
};
};
&ospi1 {
u-boot,dm-spl;
flash@0 {
u-boot,dm-spl;
};
};
&mcu_fss0_ospi1_pins_default {
u-boot,dm-spl;
};