mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-11-11 23:47:24 +00:00
6aead23323
When doing partition reboot, the boot image won't be reloaded by ROM, it is just CPU reset to boot entry. The SW has to keep the boot image inside the RAM unchanged. It includes both the TEXT section and DATA section. For SPL, the problem is DATA section will be updated at runtime, so in next partition reboot the data is not same as the initial value from cold boot. If any code depends on the initial value, then it will have problem. This patch introduces a mechanism to recover the data section for partition reboot. It adds a new section in image for saving data section. When from cold boot, the data section will be saved to that new section at SPL early phase. When from partition reboot, the data section will be restored from the new section. Signed-off-by: Ye Li <ye.li@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
177 lines
6.4 KiB
Text
177 lines
6.4 KiB
Text
if ARM64
|
|
|
|
config ARMV8_SPL_EXCEPTION_VECTORS
|
|
bool "Install crash dump exception vectors"
|
|
depends on SPL
|
|
default n
|
|
help
|
|
The default exception vector table is only used for the crash
|
|
dump, but still takes quite a lot of space in the image size.
|
|
|
|
Say N here if you are running out of code space in the image
|
|
and want to save some space at the cost of less debugging info.
|
|
|
|
config ARMV8_MULTIENTRY
|
|
bool "Enable multiple CPUs to enter into U-Boot"
|
|
|
|
config ARMV8_SET_SMPEN
|
|
bool "Enable data coherency with other cores in cluster"
|
|
help
|
|
Say Y here if there is not any trust firmware to set
|
|
CPUECTLR_EL1.SMPEN bit before U-Boot.
|
|
|
|
For A53, it enables data coherency with other cores in the
|
|
cluster, and for A57/A72, it enables receiving of instruction
|
|
cache and TLB maintenance operations.
|
|
Cortex A53/57/72 cores require CPUECTLR_EL1.SMPEN set even
|
|
for single core systems. Unfortunately write access to this
|
|
register may be controlled by EL3/EL2 firmware. To be more
|
|
precise, by default (if there is EL2/EL3 firmware running)
|
|
this register is RO for NS EL1.
|
|
This switch can be used to avoid writing to CPUECTLR_EL1,
|
|
it can be safely enabled when EL2/EL3 initialized SMPEN bit
|
|
or when CPU implementation doesn't include that register.
|
|
|
|
config ARMV8_SPIN_TABLE
|
|
bool "Support spin-table enable method"
|
|
depends on ARMV8_MULTIENTRY && OF_LIBFDT
|
|
help
|
|
Say Y here to support "spin-table" enable method for booting Linux.
|
|
|
|
To use this feature, you must do:
|
|
- Specify enable-method = "spin-table" in each CPU node in the
|
|
Device Tree you are using to boot the kernel
|
|
- Bring secondary CPUs into U-Boot proper in a board specific
|
|
manner. This must be done *after* relocation. Otherwise, the
|
|
secondary CPUs will spin in unprotected memory area because the
|
|
master CPU protects the relocated spin code.
|
|
|
|
U-Boot automatically does:
|
|
- Set "cpu-release-addr" property of each CPU node
|
|
(overwrites it if already exists).
|
|
- Reserve the code for the spin-table and the release address
|
|
via a /memreserve/ region in the Device Tree.
|
|
|
|
menu "ARMv8 secure monitor firmware"
|
|
config ARMV8_SEC_FIRMWARE_SUPPORT
|
|
bool "Enable ARMv8 secure monitor firmware framework support"
|
|
select FIT
|
|
select OF_LIBFDT
|
|
help
|
|
This framework is aimed at making secure monitor firmware load
|
|
process brief.
|
|
Note: Only FIT format image is supported.
|
|
You should prepare and provide the below information:
|
|
- Address of secure firmware.
|
|
- Address to hold the return address from secure firmware.
|
|
- Secure firmware FIT image related information.
|
|
Such as: SEC_FIRMWARE_FIT_IMAGE and SEC_FIRMWARE_FIT_CNF_NAME
|
|
- The target exception level that secure monitor firmware will
|
|
return to.
|
|
|
|
config SPL_ARMV8_SEC_FIRMWARE_SUPPORT
|
|
bool "Enable ARMv8 secure monitor firmware framework support for SPL"
|
|
select SPL_FIT
|
|
select SPL_OF_LIBFDT
|
|
help
|
|
Say Y here to support this framework in SPL phase.
|
|
|
|
config SPL_RECOVER_DATA_SECTION
|
|
bool "save/restore SPL data section"
|
|
help
|
|
Say Y here to save SPL data section for cold boot, and restore
|
|
at warm boot in SPL phase.
|
|
|
|
config SEC_FIRMWARE_ARMV8_PSCI
|
|
bool "PSCI implementation in secure monitor firmware"
|
|
depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT
|
|
help
|
|
This config enables the ARMv8 PSCI implementation in secure monitor
|
|
firmware. This is a private PSCI implementation and different from
|
|
those implemented under the common ARMv8 PSCI framework.
|
|
|
|
config ARMV8_SEC_FIRMWARE_ERET_ADDR_REVERT
|
|
bool "ARMv8 secure monitor firmware ERET address byteorder swap"
|
|
depends on ARMV8_SEC_FIRMWARE_SUPPORT || SPL_ARMV8_SEC_FIRMWARE_SUPPORT
|
|
help
|
|
Say Y here when the endianness of the register or memory holding the
|
|
Secure firmware exception return address is different with core's.
|
|
|
|
endmenu
|
|
|
|
config PSCI_RESET
|
|
bool "Use PSCI for reset and shutdown"
|
|
default y
|
|
select ARM_SMCCC if OF_CONTROL
|
|
depends on !ARCH_EXYNOS7 && !ARCH_BCM283X && \
|
|
!TARGET_LS2080A_SIMU && !TARGET_LS2080AQDS && \
|
|
!TARGET_LS2080ARDB && !TARGET_LS2080A_EMU && \
|
|
!TARGET_LS1088ARDB && !TARGET_LS1088AQDS && \
|
|
!TARGET_LS1012ARDB && !TARGET_LS1012AFRDM && \
|
|
!TARGET_LS1012A2G5RDB && !TARGET_LS1012AQDS && \
|
|
!TARGET_LS1012AFRWY && \
|
|
!TARGET_LS1028ARDB && !TARGET_LS1028AQDS && \
|
|
!TARGET_LS1043ARDB && !TARGET_LS1043AQDS && \
|
|
!TARGET_LS1046ARDB && !TARGET_LS1046AQDS && \
|
|
!TARGET_LS1046AFRWY && \
|
|
!TARGET_LS2081ARDB && !TARGET_LX2160ARDB && \
|
|
!TARGET_LX2160AQDS && \
|
|
!ARCH_UNIPHIER && !TARGET_S32V234EVB
|
|
help
|
|
Most armv8 systems have PSCI support enabled in EL3, either through
|
|
ARM Trusted Firmware or other firmware.
|
|
|
|
On these systems, we do not need to implement system reset manually,
|
|
but can instead rely on higher level firmware to deal with it.
|
|
|
|
Select Y here to make use of PSCI calls for system reset
|
|
|
|
config ARMV8_PSCI
|
|
bool "Enable PSCI support" if EXPERT
|
|
default n
|
|
help
|
|
PSCI is Power State Coordination Interface defined by ARM.
|
|
The PSCI in U-boot provides a general framework and each platform
|
|
can implement their own specific PSCI functions.
|
|
Say Y here to enable PSCI support on ARMv8 platform.
|
|
|
|
config ARMV8_PSCI_NR_CPUS
|
|
int "Maximum supported CPUs for PSCI"
|
|
depends on ARMV8_PSCI
|
|
default 4
|
|
help
|
|
The maximum number of CPUs supported in the PSCI firmware.
|
|
It is no problem to set a larger value than the number of CPUs in
|
|
the actual hardware implementation.
|
|
|
|
config ARMV8_PSCI_CPUS_PER_CLUSTER
|
|
int "Number of CPUs per cluster"
|
|
depends on ARMV8_PSCI
|
|
default 0
|
|
help
|
|
The number of CPUs per cluster, suppose each cluster has same number
|
|
of CPU cores, platforms with asymmetric clusters don't apply here.
|
|
A value 0 or no definition of it works for single cluster system.
|
|
System with multi-cluster should difine their own exact value.
|
|
|
|
config ARMV8_EA_EL3_FIRST
|
|
bool "External aborts and SError interrupt exception are taken in EL3"
|
|
default n
|
|
help
|
|
Exception handling at all exception levels for External Abort and
|
|
SError interrupt exception are taken in EL3.
|
|
|
|
if SYS_HAS_ARMV8_SECURE_BASE
|
|
|
|
config ARMV8_SECURE_BASE
|
|
hex "Secure address for PSCI image"
|
|
depends on ARMV8_PSCI
|
|
help
|
|
Address for placing the PSCI text, data and stack sections.
|
|
If not defined, the PSCI sections are placed together with the u-boot
|
|
but platform can choose to place PSCI code image separately in other
|
|
places such as some secure RAM built-in SOC etc.
|
|
|
|
endif
|
|
|
|
endif
|