mirror of
https://github.com/AsahiLinux/u-boot
synced 2024-09-30 11:22:09 +00:00
52caf2c12b
It is not recommended to have aliases for gpio. In past it was used in Linux for assigning numbers via sysfs which is deprecated and libgpiod should be used instead. In U-Boot this number is used for seq number but gpio offset are not counted from this number. That's why having these aliases only for seq number is not needed. As is done in Linux it is the best to use full gpio name instead of sequence number which depends on sequence in binding. Signed-off-by: Michal Simek <michal.simek@xilinx.com>
552 lines
9.3 KiB
Text
552 lines
9.3 KiB
Text
// SPDX-License-Identifier: GPL-2.0+
|
|
/*
|
|
* dts file for Xilinx ZynqMP zc1751-xm016-dc2
|
|
*
|
|
* (C) Copyright 2015 - 2021, Xilinx, Inc.
|
|
*
|
|
* Michal Simek <michal.simek@xilinx.com>
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
#include "zynqmp.dtsi"
|
|
#include "zynqmp-clk-ccf.dtsi"
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
|
|
|
|
/ {
|
|
model = "ZynqMP zc1751-xm016-dc2 RevA";
|
|
compatible = "xlnx,zynqmp-zc1751", "xlnx,zynqmp";
|
|
|
|
aliases {
|
|
ethernet0 = &gem2;
|
|
i2c0 = &i2c0;
|
|
rtc0 = &rtc;
|
|
serial0 = &uart0;
|
|
serial1 = &uart1;
|
|
spi0 = &spi0;
|
|
spi1 = &spi1;
|
|
usb0 = &usb1;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "earlycon";
|
|
stdout-path = "serial0:115200n8";
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x0 0x0 0x80000000>, <0x8 0x00000000 0x0 0x80000000>;
|
|
};
|
|
};
|
|
|
|
&can0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can0_default>;
|
|
};
|
|
|
|
&can1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_can1_default>;
|
|
};
|
|
|
|
&fpd_dma_chan1 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan2 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan3 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan4 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan5 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan6 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan7 {
|
|
status = "okay";
|
|
};
|
|
|
|
&fpd_dma_chan8 {
|
|
status = "okay";
|
|
};
|
|
|
|
&gem2 {
|
|
status = "okay";
|
|
phy-handle = <&phy0>;
|
|
phy-mode = "rgmii-id";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_gem2_default>;
|
|
phy0: ethernet-phy@5 {
|
|
reg = <5>;
|
|
ti,rx-internal-delay = <0x8>;
|
|
ti,tx-internal-delay = <0xa>;
|
|
ti,fifo-depth = <0x1>;
|
|
ti,dp83867-rxctrl-strap-quirk;
|
|
};
|
|
};
|
|
|
|
&gpio {
|
|
status = "okay";
|
|
};
|
|
|
|
&i2c0 {
|
|
status = "okay";
|
|
clock-frequency = <400000>;
|
|
pinctrl-names = "default", "gpio";
|
|
pinctrl-0 = <&pinctrl_i2c0_default>;
|
|
pinctrl-1 = <&pinctrl_i2c0_gpio>;
|
|
scl-gpios = <&gpio 6 GPIO_ACTIVE_HIGH>;
|
|
sda-gpios = <&gpio 7 GPIO_ACTIVE_HIGH>;
|
|
|
|
tca6416_u26: gpio@20 {
|
|
compatible = "ti,tca6416";
|
|
reg = <0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
/* IRQ not connected */
|
|
};
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1339";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
&nand0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_nand0_default>;
|
|
arasan,has-mdma;
|
|
|
|
nand@0 {
|
|
reg = <0x0>;
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x1>;
|
|
nand-ecc-mode = "soft";
|
|
nand-ecc-algo = "bch";
|
|
nand-rb = <0>;
|
|
label = "main-storage-0";
|
|
|
|
partition@0 { /* for testing purpose */
|
|
label = "nand-fsbl-uboot";
|
|
reg = <0x0 0x0 0x400000>;
|
|
};
|
|
partition@1 { /* for testing purpose */
|
|
label = "nand-linux";
|
|
reg = <0x0 0x400000 0x1400000>;
|
|
};
|
|
partition@2 { /* for testing purpose */
|
|
label = "nand-device-tree";
|
|
reg = <0x0 0x1800000 0x400000>;
|
|
};
|
|
partition@3 { /* for testing purpose */
|
|
label = "nand-rootfs";
|
|
reg = <0x0 0x1c00000 0x1400000>;
|
|
};
|
|
partition@4 { /* for testing purpose */
|
|
label = "nand-bitstream";
|
|
reg = <0x0 0x3000000 0x400000>;
|
|
};
|
|
partition@5 { /* for testing purpose */
|
|
label = "nand-misc";
|
|
reg = <0x0 0x3400000 0xfcc00000>;
|
|
};
|
|
};
|
|
nand@1 {
|
|
reg = <0x1>;
|
|
#address-cells = <0x2>;
|
|
#size-cells = <0x1>;
|
|
nand-ecc-mode = "soft";
|
|
nand-ecc-algo = "bch";
|
|
nand-rb = <0>;
|
|
label = "main-storage-1";
|
|
|
|
partition@0 { /* for testing purpose */
|
|
label = "nand1-fsbl-uboot";
|
|
reg = <0x0 0x0 0x400000>;
|
|
};
|
|
partition@1 { /* for testing purpose */
|
|
label = "nand1-linux";
|
|
reg = <0x0 0x400000 0x1400000>;
|
|
};
|
|
partition@2 { /* for testing purpose */
|
|
label = "nand1-device-tree";
|
|
reg = <0x0 0x1800000 0x400000>;
|
|
};
|
|
partition@3 { /* for testing purpose */
|
|
label = "nand1-rootfs";
|
|
reg = <0x0 0x1c00000 0x1400000>;
|
|
};
|
|
partition@4 { /* for testing purpose */
|
|
label = "nand1-bitstream";
|
|
reg = <0x0 0x3000000 0x400000>;
|
|
};
|
|
partition@5 { /* for testing purpose */
|
|
label = "nand1-misc";
|
|
reg = <0x0 0x3400000 0xfcc00000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&pinctrl0 {
|
|
status = "okay";
|
|
pinctrl_can0_default: can0-default {
|
|
mux {
|
|
function = "can0";
|
|
groups = "can0_9_grp";
|
|
};
|
|
|
|
conf {
|
|
groups = "can0_9_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO38";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO39";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_can1_default: can1-default {
|
|
mux {
|
|
function = "can1";
|
|
groups = "can1_8_grp";
|
|
};
|
|
|
|
conf {
|
|
groups = "can1_8_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO33";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO32";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_i2c0_default: i2c0-default {
|
|
mux {
|
|
groups = "i2c0_1_grp";
|
|
function = "i2c0";
|
|
};
|
|
|
|
conf {
|
|
groups = "i2c0_1_grp";
|
|
bias-pull-up;
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
};
|
|
|
|
pinctrl_i2c0_gpio: i2c0-gpio {
|
|
mux {
|
|
groups = "gpio0_6_grp", "gpio0_7_grp";
|
|
function = "gpio0";
|
|
};
|
|
|
|
conf {
|
|
groups = "gpio0_6_grp", "gpio0_7_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
};
|
|
|
|
pinctrl_uart0_default: uart0-default {
|
|
mux {
|
|
groups = "uart0_10_grp";
|
|
function = "uart0";
|
|
};
|
|
|
|
conf {
|
|
groups = "uart0_10_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO42";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO43";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_uart1_default: uart1-default {
|
|
mux {
|
|
groups = "uart1_10_grp";
|
|
function = "uart1";
|
|
};
|
|
|
|
conf {
|
|
groups = "uart1_10_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO41";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO40";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_usb1_default: usb1-default {
|
|
mux {
|
|
groups = "usb1_0_grp";
|
|
function = "usb1";
|
|
};
|
|
|
|
conf {
|
|
groups = "usb1_0_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO64", "MIO65", "MIO67";
|
|
bias-high-impedance;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
|
|
"MIO72", "MIO73", "MIO74", "MIO75";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_gem2_default: gem2-default {
|
|
mux {
|
|
function = "ethernet2";
|
|
groups = "ethernet2_0_grp";
|
|
};
|
|
|
|
conf {
|
|
groups = "ethernet2_0_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
conf-rx {
|
|
pins = "MIO58", "MIO59", "MIO60", "MIO61", "MIO62",
|
|
"MIO63";
|
|
bias-high-impedance;
|
|
low-power-disable;
|
|
};
|
|
|
|
conf-tx {
|
|
pins = "MIO52", "MIO53", "MIO54", "MIO55", "MIO56",
|
|
"MIO57";
|
|
bias-disable;
|
|
low-power-enable;
|
|
};
|
|
|
|
mux-mdio {
|
|
function = "mdio2";
|
|
groups = "mdio2_0_grp";
|
|
};
|
|
|
|
conf-mdio {
|
|
groups = "mdio2_0_grp";
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_nand0_default: nand0-default {
|
|
mux {
|
|
groups = "nand0_0_grp";
|
|
function = "nand0";
|
|
};
|
|
|
|
conf {
|
|
groups = "nand0_0_grp";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-ce {
|
|
groups = "nand0_ce_0_grp";
|
|
function = "nand0_ce";
|
|
};
|
|
|
|
conf-ce {
|
|
groups = "nand0_ce_0_grp";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-rb {
|
|
groups = "nand0_rb_0_grp";
|
|
function = "nand0_rb";
|
|
};
|
|
|
|
conf-rb {
|
|
groups = "nand0_rb_0_grp";
|
|
bias-pull-up;
|
|
};
|
|
|
|
mux-dqs {
|
|
groups = "nand0_dqs_0_grp";
|
|
function = "nand0_dqs";
|
|
};
|
|
|
|
conf-dqs {
|
|
groups = "nand0_dqs_0_grp";
|
|
bias-pull-up;
|
|
};
|
|
};
|
|
|
|
pinctrl_spi0_default: spi0-default {
|
|
mux {
|
|
groups = "spi0_0_grp";
|
|
function = "spi0";
|
|
};
|
|
|
|
conf {
|
|
groups = "spi0_0_grp";
|
|
bias-disable;
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
mux-cs {
|
|
groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
|
|
"spi0_ss_2_grp";
|
|
function = "spi0_ss";
|
|
};
|
|
|
|
conf-cs {
|
|
groups = "spi0_ss_0_grp", "spi0_ss_1_grp",
|
|
"spi0_ss_2_grp";
|
|
bias-disable;
|
|
};
|
|
};
|
|
|
|
pinctrl_spi1_default: spi1-default {
|
|
mux {
|
|
groups = "spi1_3_grp";
|
|
function = "spi1";
|
|
};
|
|
|
|
conf {
|
|
groups = "spi1_3_grp";
|
|
bias-disable;
|
|
slew-rate = <SLEW_RATE_SLOW>;
|
|
power-source = <IO_STANDARD_LVCMOS18>;
|
|
};
|
|
|
|
mux-cs {
|
|
groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
|
|
"spi1_ss_11_grp";
|
|
function = "spi1_ss";
|
|
};
|
|
|
|
conf-cs {
|
|
groups = "spi1_ss_9_grp", "spi1_ss_10_grp",
|
|
"spi1_ss_11_grp";
|
|
bias-disable;
|
|
};
|
|
};
|
|
};
|
|
|
|
&rtc {
|
|
status = "okay";
|
|
};
|
|
|
|
&spi0 {
|
|
status = "okay";
|
|
num-cs = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi0_default>;
|
|
|
|
spi0_flash0: flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "sst,sst25wf080", "jedec,spi-nor";
|
|
spi-max-frequency = <50000000>;
|
|
reg = <0>;
|
|
|
|
partition@0 {
|
|
label = "spi0-data";
|
|
reg = <0x0 0x100000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
&spi1 {
|
|
status = "okay";
|
|
num-cs = <1>;
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_spi1_default>;
|
|
|
|
spi1_flash0: flash@0 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "atmel,at45db041e", "atmel,at45", "atmel,dataflash";
|
|
spi-max-frequency = <20000000>;
|
|
reg = <0>;
|
|
|
|
partition@0 {
|
|
label = "spi1-data";
|
|
reg = <0x0 0x84000>;
|
|
};
|
|
};
|
|
};
|
|
|
|
/* ULPI SMSC USB3320 */
|
|
&usb1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_usb1_default>;
|
|
};
|
|
|
|
&dwc3_1 {
|
|
status = "okay";
|
|
dr_mode = "host";
|
|
snps,usb3_lpm_capable;
|
|
maximum-speed = "super-speed";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart0_default>;
|
|
};
|
|
|
|
&uart1 {
|
|
status = "okay";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&pinctrl_uart1_default>;
|
|
};
|